USB audio hardware: what works with iBook 366 clam and OSX 2.8?

I just bought a Behringer UAC202 USB audio interface. My iBook will recognize that it is attached and will give me audio 'out' settings, but it will not configure any audio 'in' settings. It works fine on my iBook G4 with OSX 4.11 however.
Is this a Behringer problem? Do I need to use OSX Panther on the old iBook? Is there a problem with the old clamshell's as far as USB audio in?
Anyone know a cheap USB audio hardware that works in this case? I want to dedicate this great old machine to some easy audio useage.... using the Polar RAM looper instrument in Digital Performer..... and nothing else..... I'm not recording audio to my hard drive..... just want to get audio in and out of the iBook to and from Digital Performer.
Thanks!

Driver support in Panther is pretty limited with regards to newer hardware as far as i've experienced. If there isn't any drivers offered, either by the company or via third party, then you may be stuck.
The only way that i get audio in on my Blueberry iBook is with the Apple iMic that i picked up at an Apple Store a few years ago. It works fine under panther, tiger and leopard.
Good Luck
Vince

Similar Messages

Facetime Audio don´t work with 10.10.2 and iOS 8.1.3

Hello!
After the Upgrade to Yosemite 10.10.2 on my Mac Pro and iOS 8.1.3 on my iPhone 5 i cannot make Facetime Audio Calls anymore. The Problem is that when i get a call or make a call i can hear the people but they dont hear me. The settings don´t change. The Microphone on my Logitech Webcam is selected in Facetime App and in audio settings but it dont works. The Microphone is not broken i tested it with Quicktime.

i Must correct again. With soundblaster drivers deinstalled Facetime Works better as before but the bug was already there. Sometimes my voice disappeared and the caller don´t hear me. i think there is a Bug between Yosemite 10.10.2 and iOS 8.13 and i hope with 10.10.3 and 8.2 this bug was fixed.

HTTP Streaming WAV audio no longer works with quicktime 7.7.3 OSX or 7.7.5 in windows

The latest revisions of quicktime (as plugin) no longer play our webservice's streamed audio files. The audio is simply encoded wav all javascript hooks seem to work properly, but there is no resulting audio output. Reverting to previous revisions of quicktime on the same platforms restores the expected behavior.
The files are streamed over authenticated HTTPS connections and are encoded as "RIFF (little-endian) data, WAVE audio, ITU G.711 mu-law, stereo 8000 Hz". If the file is downloaded to the local machine, the quicktime player application has no problems playing the audio. Similarly, dropping a file: URL to the download into the web browser also plays correctly. The issue started with Quicktime 7.7.3 on OSX with Safari (Yosemite) and 7.7.5 on Windows (Chrome and Firefox). Mavericks and previous Windows quicktime plugins work correctly. This is especially problematic for our Mac OS clients because we have not been able to identify a current working combination or a functional downgrade path other than to downgrade the OS to Mavericks.
Any suggestions or guidance would be greatly appreciated.
Thanks!

Jon, I read. But the links to websites are not playing on a Windows7 computer. Can you tell me why they are not?
I believe that with a new dawn comes new understanding of the problem.
I do not have access to a Windows 7 computer nor do I run Windows on my Mac.
I am not a web coding programmer. However...
Neither of the original poster's links (http://openmap.bbn.com/~mthome/quicktimeaudio.html and http://openmap.bbn.com/~mthome/wavtest.wav) work because they both point to the same HTML (quicktimeaudio.html) file.
The HTML file looks like this:
This file appears to look for the QT plug-in to see if QT is installed, if the version is v7.7.6, and whether or not the WAV extension is supported.
When I click on either link, this is what I see:
Although I am running:
the browser display shown above indicates the HTML code thinks that QT is not installed rather than being the wrong version and then, instead of terminating the browser processing and displaying the correct error message, the HTML code falls through to a display of the audio media controller and automatically starts playback. Unfortunately, since confirmation of WAV playback support was skipped (or for some other reason), the QT plug-in does not access the required codec (or fails to send the data to the handler) and no audio is heard when playing the WAV audio file. In short, even though I am not a web programmer, I believe the main issue here is the coding of the HTML file.
When I "re-containered" the original poster's WAV file and posted it on my own server, I created a URL link that actually pointed to the WAV resource and not to the HTML file code as did the OP's secondary link. Thus, when I accessed the audio file, I did so directly via the plug-in, by-passing the HTML file code issue and allowing the file data to play correctly in Safari under both Yosemite and IOS 8.
Believe the HTML file needs to be re-coded to fix the problem. I can now play the original 8-bit µ-law encoded WAV file in players and Safari but believe the OP here should consider a more modern compression format/file container combination that would allow him to abandon use of the QT player plug-in to maintain compatibility with "plug-in free" browsers. For instance, would HTML5 coding be able to play AAC encoded content in MOV, MP4, M4V, and/or M4A file containers? Once again, questions like this are beyond my expertise and need to be answered by someone proficient in this area.

Does anyone know a USB WIFI connection that works with the Intel Powerbook and OS 10.7.5

I have replaced my AIRPORT EXTREME card because it dropped connection and wouldn't turn back on.
It worked fine for 14 months, but now it is broken again.
I have given up.
I would rather replace a 20-30 dongle everytime rather than the airportexpress card.

that should say a $20-$30 dongle.

What audio/midi interface works with new iMac 2014

What audio/midi interface works with new iMac 2014. new imac only has USB3 and Thunderbolt.

Thanks for the info.
I have two MOTU 8pre's would these work with the Thunderbolt to Firewire adaptor?

USB audio DAC stops working after suspend

I didn't update my mediacenter running arch for a few months so I figured i'd reinstall it because of the filesystem, /lib and grub changes. Now after reinstalling I'm running into the issue that my USB audio DAC stops working after a suspend.
After a suspend speaker-test gives me the following error:
[user@mediacenter ~]$ speaker-test -c 2
speaker-test 1.0.25
Playback device is default
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
ALSA lib pcm_dmix.c:1068:(snd_pcm_dmix_open) unable to open slave
Playback open error: -77,File descriptor in bad state
I've tried replugging my DAC and restarting ALSA, without any success. I have to reboot to get sound again.
Output of /var/log/pm-suspend.log
za jul 21 19:20:24 CEST 2012: performing suspend
Initial commandline parameters:
za jul 21 19:22:06 CEST 2012: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
Linux mediacenter 3.4.6-1-ARCH #1 SMP PREEMPT Fri Jul 20 08:21:26 CEST 2012 x86_64 GNU/Linux
Module Size Used by
rfcomm 33627 0
bluetooth 190551 3 rfcomm
rfkill 15604 1 bluetooth
r8169 49386 0
acpi_cpufreq 5933 0
mperf 1267 1 acpi_cpufreq
snd_usb_audio 93519 2
snd_hwdep 6300 1 snd_usb_audio
snd_usbmidi_lib 18744 1 snd_usb_audio
snd_rawmidi 18479 1 snd_usbmidi_lib
snd_seq_device 5300 1 snd_rawmidi
snd_pcm 74958 2 snd_usb_audio
snd_page_alloc 7217 1 snd_pcm
snd_timer 18966 2 snd_pcm
mei 32152 0
snd 58997 9 snd_usb_audio,snd_hwdep,snd_timer,snd_pcm,snd_rawmidi,snd_usbmidi_lib,snd_seq_device
usb_storage 44760 0
uas 9285 0
i2c_i801 8180 0
microcode 12185 0
iTCO_wdt 12813 0
coretemp 5654 0
iTCO_vendor_support 1929 1 iTCO_wdt
crc32c_intel 1987 0
joydev 9991 0
soundcore 5410 1 snd
mii 4123 1 r8169
firewire_ohci 31677 0
firewire_core 51552 1 firewire_ohci
pcspkr 1899 0
serio_raw 4653 0
processor 26567 1 acpi_cpufreq
crc_itu_t 1363 1 firewire_core
evdev 9754 5
ext4 424175 3
crc16 1359 2 ext4,bluetooth
jbd2 73919 1 ext4
mbcache 5977 1 ext4
sr_mod 14823 0
sd_mod 29239 5
cdrom 35648 1 sr_mod
usbhid 36430 0
hid 85477 1 usbhid
ahci 20549 4
libahci 20023 1 ahci
uhci_hcd 23404 0
pata_jmicron 2480 0
pata_acpi 3408 0
ata_generic 3295 0
ehci_hcd 41026 0
libata 167611 5 ahci,pata_acpi,libahci,ata_generic,pata_jmicron
scsi_mod 132974 5 uas,usb_storage,libata,sd_mod,sr_mod
usbcore 147565 8 uas,uhci_hcd,snd_usb_audio,usb_storage,snd_usbmidi_lib,ehci_hcd,usbhid
usb_common 954 1 usbcore
i915 438144 4
video 11307 1 i915
button 4502 1 i915
i2c_algo_bit 5391 1 i915
intel_agp 10936 1 i915
intel_gtt 14047 3 i915,intel_agp
drm_kms_helper 33051 1 i915
drm 208958 5 i915,drm_kms_helper
i2c_core 20369 5 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit
total used free shared buffers cached
Mem: 3721220 336284 3384936 0 16624 156204
-/+ buffers/cache: 163456 3557764
Swap: 265068 0 265068
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
Running hook /etc/pm/sleep.d/90alsa suspend suspend:
/etc/pm/sleep.d/90alsa suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
/usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
Kernel modesetting video driver detected, not using quirks.
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0
/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
za jul 21 19:22:07 CEST 2012: performing suspend
za jul 21 19:22:22 CEST 2012: Awake.
za jul 21 19:22:22 CEST 2012: Running hooks for resume
Running hook /usr/lib/pm-utils/sleep.d/99video resume suspend:
/usr/lib/pm-utils/sleep.d/99video resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend:
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led resume suspend:
/usr/lib/pm-utils/sleep.d/95led resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock resume suspend:
/usr/lib/pm-utils/sleep.d/90clock resume suspend: success.
Running hook /etc/pm/sleep.d/90alsa resume suspend:
ALSA lib pcm_dmix.c:1068:(snd_pcm_dmix_open) unable to open slave
aplay: main:682: audio open error: File descriptor in bad state
/etc/pm/sleep.d/90alsa resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules resume suspend:
Reloaded unloaded modules.
/usr/lib/pm-utils/sleep.d/75modules resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth resume suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub resume suspend:
/usr/lib/pm-utils/sleep.d/01grub resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave resume suspend:
/usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00logging resume suspend:
/usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
za jul 21 19:22:23 CEST 2012: Finished.
Output of aplay -l
[user@mediacenter ~]$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: DAC [USB Audio DAC], device 0: USB Audio [USB Audio]
Subdevices: 0/1
Subdevice #0: subdevice #0
What I'm noticing is that after a suspend "Subdevices: 0/1" gets changed to "Subdevices: 1/1".
Any help is much appreciated!
Last edited by Quaith (2012-07-21 17:33:59)

Odysseus wrote:
Unless you can find a way to stop XBMC from using your DAC, I would try hunting down the update which broke it and file a bug report with the appropriate project. https://wiki.archlinux.org/index.php/Do … g_Packages.
I suspect it would be the kernel.
Yes I am suspecting the kernel as well. I'll try to change some options in XBMC to maybe get this working, and if not I'll see how far I can downgrade with the kernel. My last installation was a few months old so I hope it broke not that long ago.
Thanks for the help

External USB HD does not work with HAL:

External USB HD does not work with HAL:
From the last 10 days the HAL auto-mount with ntfs-3g file system of my external hard drive does not woks.
But the manual mount procedure with the command mount -t ntfs-3g /dev/sdb* /mnt/XYZ works.
I've followed the instructions in the wiki: http://wiki.archlinux.org/index.php/HAL and the system has worked up to the last kernel or HAL update.
My fat32 usb-stick works without any problem.
If I try to open the device with KDE it appears an error popup wit this message:
TODO: have to rethink extra options
Error: kio_media_mount_helper
The log from the kernel.log is
Nov 6 22:03:16 myhost usb 5-1: new high speed USB device using ehci_hcd and address 4
Nov 6 22:03:16 myhost usb 5-1: configuration #1 chosen from 1 choice
Nov 6 22:03:17 myhost Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov 6 22:03:17 myhost ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 6 22:03:17 myhost Initializing USB Mass Storage driver...
Nov 6 22:03:17 myhost scsi6 : SCSI emulation for USB Mass Storage devices
Nov 6 22:03:17 myhost usb-storage: device found at 4
Nov 6 22:03:17 myhost usb-storage: waiting for device to settle before scanning
Nov 6 22:03:17 myhost usbcore: registered new interface driver usb-storage
Nov 6 22:03:17 myhost USB Mass Storage support registered.
Nov 6 22:03:22 myhost scsi 6:0:0:0: Direct-Access WDC WD32 00JB-00KFA0 0811 PQ: 0 ANSI: 0
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sdb: sdb1
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Attached SCSI disk
Nov 6 22:03:22 myhost sd 6:0:0:0: Attached scsi generic sg2 type 0
Nov 6 22:03:22 myhost usb-storage: device scan complete
and the error.log is
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Do you have some idea ....
Bye.

I have done the following:
Downloaded the patched hal version.
used makepkg in /abs/local/trunk/ to create a pkg for pacman
used sudo pacman -U pkgname to install it.
used sudo nano /etc/hal/fdi/policy/preferences.fdi to create the fdi file with the following content:
saved the file and removed my ntfs entryes from fstab and rebooted. and still there is no automount off ntfs partitions.
have i done something wrong?
br fjodork
WARNING: what follows is a guide of what did work for me, I'm still in an early stage of learning linux, so please correct me if anything of what follows is wrong/dangerous/stupid. As I said, this worked for me, it's not pretty, since I was learning each step on the fly and I'm sure there are better ways to do this.
So fjodork, you seem to have done the the necessary steps, though i couldn't get it to work until i first removed hal without dependencies
pacman -Rd hal
it will give you some warning about the dependencies, ignore it since we are reinstalling hal in a few steps.
First i tried to follow Raymano's link, obviously it showed me nothing in the browser so I thought it might be a broken link.
So I downloaded the source tarball from here http://hal.freedesktop.org/releases/hal-0.5.10.tar.gz
unpacked it changed the /tools/hal-storage-mount.c as per Milfadoodle's instructions.
at first I tried to compile directly from source, the process would finish without a glitch though after reboot nothing changed, as if hal weren't
installed, i guess there were issues with paths. anyway read on
Then repacked the source in tarball, copied it to /var/abs/extra/system/hal and modified the PKGBUILD as follows
makedepends=('pkgconfig' 'gperf')
options=('!libtool')
install=hal.install
source=(${pkgname}-${pkgver}.tar.gz #removed url so makepkg looks in the current directory for the tarball
hal
hal-policy.patch
cryptsetup_location.patch
hal-0.5.9-hide-diagnostic.patch
ntfs3g-valid-options.patch)
md5sums=('6641c30a27c00485c6accac5110ff911' # replace with md5sum of your package's sourceball (run md5sum filename)
'882f67668cb14a0a9e4a27ef22278027'
'5ba8b610aa9763a5f42b9f7cbd7a86ad'
then makepkg (i had to add --asroot, don't ask why
and finally pacman -U hal-0.5.10-1-i686.pkg
another reboot and everything worked without a glitch!:D (yeah i know i still haven't got rid of the reboot mentality )
I have also put the policy files as per the wiki instructions.
PS: I know this is a dirty way to getting things done but as i said, I'm just starting
If anyone could comment/correct/explain this post I'd be more than happy, the automount issue was bothering me for about a month now (you'll say why do I need ntfs in the first place? well, I only recently switched for Linux as my primary OS, these are some relics of the M$ era

Is there such a thing as a USB WIFI adapter that works with OS X 10.9?

Is there such a thing as a USB WIFI adapter that works with OS X 10.9? I have tried 3 different models, none of which were compatible. The built-in WIFI card in a 2012 Mac Pro is absolutely crap (0/10 on the performance scale). Any recommendations?

Hey everyone, yes I have installed the drivers properly. I've used an ASUS, Bolse, and EDIMAX adapter. Some had a 10.8 driver, some had 10.9. After reaching out to customer support for each and every one of these companies for help, and through multiple returns, I have not gotten anywhere with any of the drivers or products.
It's getting ridiculously hard to stay an Apple customer when the quality of their products are getting worse and worse, which leaves me no choice but to go to third parties to replace the faulty hardware.
And honestly I'm just sick of calling India every day to get my issues resolved.

USB webcam microphone not working with Starcraft 2 voice chat

=USB webcam microphone not working with Starcraft 2 voice chat?Windows 7, X-fi Fatalty Pro
I have a webcam with ?a built in microphone (Ps3 eye). ?It is connected by USB. ?The drivers are the CL-Eye drivers; a third party driver set since Sony does not directly support the eye for PC.
in the windows audio device management, the microphone appears as normal and is set as the default device. ?I can use the windows sound recorder to record me speaking just fine. ?However if I use any other applications it doesn't seem to work at all. ?I can select the device as the default recording device in Starcraft 2 as well as Teamspeak 3 but no sound is detected. ?The USB microphone does not show up as a selectable device in recording options in my Creative Control Panel. ?Disabling the default creative microphone does nothing.
I think the problem is in that windows can directly detect the microphone and so software that uses the windows audio device manager works fine, but anything that talks directly with my sound card software does not properly detect the microphone. ?Basically, I can select the device as a default device but it does not work.
Any thoughts on this or am I SOL and have to find myself a shiny new headset?

I had the same problem. You need to check the device index of your USB mic.
In my case. I'm on a Mac OSX 10.6 system. I had four devices cataloged. With the last one being the USB mic.
Then set like so in your AS code audioPub.microphoneManager.micIndex = 3;
Remember, that the indexing is 0 based.
The sound framework make the assumption that the index is 0.
Hope that helps.

Looking for a way to get my Product ID and Vendor ID so I can enable my Radium 49 USB MIDI keyboard to work with Labview 7

Looking for the Product ID and Vendor ID for my Radium 49 USB MIDI keyboard to work with Labview 7
Is there a tool to find out the Vendor ID and Product ID for a USB device?
Example: of what I'm looking for
The Product ID for National Instruments DAQPad-6020E is 0x12C0. The
USB vendor ID is 0x3923. This is a 16-bit hexadecimal number(1093)
(that is decimal 4243).
Thanks for all the fast responses this newsgroup RULES!!!!!!!!!!!!

http://digital.ni.com/public.nsf/allkb/335A90747734097886257070006415B9
How To Find The Vendor and Product ID for USB Devices?
Primary Software: Driver Software>>NI-VISA
Primary Software Version: 3.3.1
Primary Software Fixed Version: N/A
Secondary Software: N/A
Problem:
I want to make an NI-VISA driver that requires the vendor and product ID?
Solution:
There is a utility called USBView,
free from Windows, attached below, which you can use to view what is
connected to your computer's USB ports. It is necessary to load this
program and connect the USB device in development. Upon selecting the
device in USBView, one can then look on the right side of the
application window to obtain the Product ID and Vendor ID. This will
allow you to enter in the correct IDs when creating a driver .inf file
when using the VISA Driver Development Wizard. For more information
about how to use the VISA Driver Development Wizard see the related
links below.
Note: It is necessary to keep the hexadecimal
(0x####) format. Do not remove the "0x" hexadecimal format preceding
the ID number.

I've been working with documents in pages and recently downloaded word for mac. i open the pages documents and they appear to be corrupt. at least, a lot of the font is now in weird boxed pictures. what do i do?

I've been working with documents in Pages and recently downloaded Word for Mac. Upon opening Pages documents with Pages, the documents appear corrupt. Much of the font has been replaced with boxed little pictures - yet they are identified as times new roman. What do I do?

You got the new iphone????? I have same problem. I transferred audiobooks to device to find no audiobooks on device (despite it being in iTunes as if it was). Have you found a solution????? I even tried to change import settings on format transfer but hasn't worked.

Does anyone know if m-audio 410 will work with OS 10.8?

does anyone know if m-audio 410 will work with OS 10.8?

The Canon UFR2 v2.41 driver for 10.7 that was released last month also works fine on 10.8.
This driver is for UK English regions where your model is known as the iR1024iF. If you want to check the Canon USA web site for the US English version of the UFR2 v2.41 driver then you should get the correct model name.

Working with ibooks Author

Hey guys. I've recently been doing some work with ibooks Author. I'm not sure if this is the subreddit to post my question to, so sorry if its not. My question is: How do you string a video across multiple pages within the document. I'm trying not to bloat my file size with extra videos if there is away to run one in the background. Thanks!

Page by page is it - no backgrounding as you require.
When a user navigates to another page, assets such as your example are then ignored for, and replaced by, assets on the next.
See Optimizing performance in your iBooks Author books. Note too that iBA will optimize video assets.
If your content is such that you risk exceeding the 2GB limit, consider publishing a series of editions, instead.

I was working with iPhoto downloading pictures and it quit unexpectedly and i lost a bunch of pictures what do i do can they be recovered ? Please can someone help it took me 12 hours between scanning & transferring & dating old family slides

I was working with iPhoto downloading pictures and it quit unexpectedly and i lost a bunch of pictures what do i do can they be recovered some where on my computer?? Please can someone help it took me 12 hours just today not counting yesterday between scanning & transferring with a flash drive then dating old family slides in my iphoto. I lost alot

I was working with iPhoto downloading pictures
Do you mean importing photos? If so what were you importing from? If it is a flash drive why not just re-import from it? Where did you scan them?
As to backups - you really need to always have your backup running - without good backups you will lose all photos sooner or later
LN

Why has my USB Superdrive suddenly stopped working with my MacBook Pro?

Why has my Apple USB SuperDrive suddenly stopped working with my MacBook Pro?
Normally I plug it in and insert a CD or DVD and it is immediately recognised, but today it took the DVD, made a 'whirring' noise for a few seconds and then stopped without being recognised.

Try the options on this list:
Credit Kappy.
Try 1 and 5.
Ciao.

USB audio hardware: what works with iBook 366 clam and OSX 2.8?

Similar Messages

Maybe you are looking for