USB audio input to voice-over tool not working

with FCE-HD on iMac i have system preferences set to USB-122 Tascam box for audio input/output (works great with GB for instance) but when i try using it for audio input on FCE and the voice-over tool set to USB-122, i hear no audio, the level meter doesn't more, etc, its still taking the audio from the built-in mic.
im sure its something simple im overlooking??
tia

Mark,
See if this post helps. Not familiar with USB audio devices myself, but found this searching:
John Hayward, "Audio out from FCE HD to USB audio iMic" #1, 10:11am Oct 4, 2005 CDT

Similar Messages

FCStudio2 - Voice Over Tool not working

We just recently upgraded to FCStudio2 and are wanting to use the VO feature. First we ran into the fact that we had to have Log and Capture open to record the audio but we didn't get the countdown. Then w/o log and capture, we get the countdown, but not the VO recorded audio. Now, today, it works with or w/o log and capture open, but cannot get the playback to work with the VO. What a frustrating tool.....any ideas? We have Blackmagic card and Soundbooth mic going to mixer then from mixer to computer.

I believe the issue is with the Blackmagic card rather than FCP or the VO Tool specifically ... your I/O card does not identify itself to the system as an audio interface but rather a video digitizing (vdig) interface ... hence FCP's VO tool (which is looking for an audio interface) doesn't see it (or something like that). I would imagine that your Log and Capture window open method is a kind of hack that is causing the card to activate and hence onpass the signal to the VO Tool ... I don't know if its an officially sanctioned method for using the VO Tool but it sounds a bit quirky.
I can tell you that the VO Tool seems to work just fine here with my audio specific interface (Sound Devices USBPre) ... I dare say that doesn't help but hopefully it frames the problem a little.

Trouble viewing audio levels in Voice Over tool

Hello,
I often record voice over into Final Cut Pro using the Voice Over tool. In the middle section of the Voice Over window there is a 'Level' meter that flashes Green to Yellow and Red, illustrating the level of audio being fed into the Mac. For some reason though, this has stopped working for me.
My set up is this: A Mic in our voice over booth connects to a Soundcraft 4 channel mixing desk via an XLR cable. The mixing desk is linked to a JVC HD tape desk, which is connected to the Mac via FireWire.
Previously, to capture Voice Over I set the tape deck to 'Line' input, in 'DV' mode and set the Voice Over tool to 'DV Audio' as the source.
I can see sound levels on the mixing desk. I can see sound levels on the tape deck, but I can't see sound levels on the Mac's VO tool. Despite this, it does still capture voice over (I just can't 'see' it).
This problem is annoying because it means Im unsure whether the Mac is actually receiving an audio feed or not unless I do a test recording first.
Any suggestions as to why the Voice Over tool would suddenly stop showing me Levels, would be greatly appreciated!

My secondary Mac works fine when the AV settings are set to HDV, despite it receiving standard DV audio input. Whether FCP is set to DV or not doesn't seem to matter in this case.
In trying to resolve the issue I played around with DV/HDV settings within FCP and the Deck; trying different combinations, but with no success.
+To recap (just to clarify in my own head), the situation is this:+
+Both of my Macs, Primary and Secondary, happily record Voice Over, via the Voice Over tool.+
+The Mic in the sound room connects to a Mixing desk via an XLR cable. The mixing desk is also connected to 2 sets of headphones, one for the Artist and one for the Engineer. 2 audio jacks connect the mixing desk to the JVC tape deck. The JVC tape deck connects to my Mac via FireWire to the port at the rear of the Mac.+
+The issue is that the Primary Mac does not display audio Levels in the Voice Over tool, whilst it does on the Secondary Mac.+
+While Im recording Voice Over on my secondary Mac I can see that there is an Audio input because the Green/Yellow/Red bar flashes up. On my Primary mac this bar is inactive and therefore gives me no clues as to the level of audio being fed into the Mac.+

Unable to capture audio from BlackMagic HD Extreme via Voice Over tool

Hi !
I'm trying to capture audio via my BlackMagic HD Extrem card using the Voice Over tool in FCP6, but I can't, no audio is incoming.
I can ingest audio with video using log and capture, then I know my card and my cables are working.
I tried to set the BM card as audio input in my Audio's System Prefereces Pane, but it isn't working either.
I've been looking on the BM website, but I found nothing.
Can you help me ?
Thx

Thanks for the reply.
Looking at system preferences I found that audio input was set microphone. Don't know how it happened. I switched it to DeckLink and now FCP displays 16 input channels in Log and Capture dialog. I didn't try to capture yet but I think it solved the problem, because before I had only two channels displyed.

Voice over tool limited to built-in microphone

The voice-over tool will not give me the dv audio option (my camera is connected via firewire and all systems are go. I know I'm getting a signal from the mic into my camera). Whenever I select DV Audio, I get the following error message:
"No sound recording devices are available. They may be in use by another application, incorrectly connected or may be conflicting with a video output device."
Now I looked up the problem on the Apple support forum and learned that exactly this problem had happened some time in the past with an older model computer. In that case the person submitting the problem was told to update their operating system, to OS X 10.2.3 or higher. I have the latest update to my Macbook Pro so that obviously isn't the issue here.
I'm stumped. Any suggestions?

Sorry -- I'm not sure how the Mbox works... but you cannot monitor VO back from the computer as you're VOing.
SO -- if the Mbox can monitor the audio track then use that. Most of us use some type of mixing board... even a two channel one will do.
Do not try and monitor back off the mac. Won't work... unless they've fixed this in v5.
CaptM

Can I designate where the voice over tool's files go?

Is there a way to tell the voice over tool where the files should be placed? Just curious.
Best,
Tom

In system settings, tell it to capture audio files separately from video files, and then select a scratch disk for the audio files. I think this will work, but not sure. I've never had to do it.

Voice Over Tool Lockup

I upgraded to Lion last week and now when I select Voice Over Tool, I get the beachball and the application just freezes. Is anyone else experiencing this problem? I have to do a force quit to get out. Any suggestions?
Thanks

I did try removing the pref file, but it made no difference. I was already at 4.0.1.
I bit the bullet, offloaded all my files to an external hard drive and wiped my Mac clean. I then reinstalled Snow Leopard. Everything is working fine.
Not sure what the hang up with Lion is on FCE. All the video editing works fine. Just causes the entire system to lockup while using Voice Over. Not sure if it's related to FaceTime but sneaking suspicion says maybe.
Thanks for the help.

Bad noise from USB audio input

Using Roland UA-30 USB audio input device with ibook 1.2ghz with Logic Pro 7.
Getting nasty noise. Any other ways of getting audio into my ibook without the fuzz and buzz ?

ok first of all to help your ibook 1.2ghz's power, upgrade your rams, atleast 1.5GB, safer side will be 2.5GB
2) get the pro app if you haven't done so
http://www.apple.com/support/downloads/proapplicationsupport30macosx1039.html
3) I was gonna say get the latest update for the UA-30 but it comes with OSX
4) try not to set you buffer size too high, try around 128-256 or better 512
5) make sure your cables are good/pro cables
6) record using other applications to see if its logic or just the card itself
stash

Voice over does not allow me to open locked screen

voice over does not allow me to open locked screen iPhone 6
<Subject Edited by Host>

Use two taps wherever you would use one tap. Navigate to Settings/General/Accessibility and turn it off.

Sample rate off the audio input and out devices do not match - what to do?

This is fundamental, I know, but nevertheless I can't find my way around it. I get this error message when trying to recor:
Sample rate off the audio input and out devices do not match
and am asked to do this:
Use the appropriate operating system or audio device control panel to adjust the sample rates of the input and output devices to use the same settingt.
I have defined the sample rate to 44.1/16 bit in accordance with my inbuild soundcardt.
I am trying to record from LineIn.
When running on a M-Audio sound card I don't face any problems.
HP 8560W, sound card IDT/High definition audio Codec
Any suggestions?
Knud
Copenhagen

You're sure you have set BOTH the input and output settings to 44.1 16 bit?
Which version of Windows are you running? There are a number of posts on this forum about how to fully access both the Windows Mixer and the Mixer for your soundcard. Especially, you need to ensure that all "Windows Sounds" are turned OFF.

Looking for a reading App. iPad (iOS 7.1.2) - Kindle. I am looking for a good app that can help a college student with reading books that cannot be found on audio book. Voice over works, but monotone!

Looking for a reading App.
iPad (iOS 7.1.2) - Kindle.
I am looking for a good app that can help a college student with reading books that cannot be found on audio book. I have tried voice over and it works but it's very monotone and it really strings things together.
- I'm willing to pay for a good app but I can't seem to sort though the many that are out there. Any suggestions.

Ah. I'm surprised, but there we go.
Have a look here ...
http://jam.hitsquad.com/vocal/about2136.html
(courtesy of googling 'OSX free multitrack recording software')
Didn't have time to do more than skim, but 'Ardour' looked promising. Protools is the only one I've used, the full product is one of the industry standards, but the free 'lite' version listed here seems to be limited to 2 in/out as well.
Referring to your original post, I'd think trying to write or 'script' something would be a nightmare ... synchronisation of streams within something like Applescript would be a major issue, quite apart from anything else.
G5 Dual 2.7, MacMini, iMac 700; P4/XP Desk & Lap. Mac OS X (10.4.8) mLan:01x/i88x; DP 5.1, Cubase SX3, NI Komplete, Melodyne.

Getting prompt "Audio file "Male Voice#16.aif" not found", upon app startup

Hi -
I've been using GarageBand for podcasting for the last couple of years. But it seems to be acting funky:
For the last couple of uses, I've gotten the prompt "Audio file “Male Voice#16.aif” not found." Where would this file be found? I went as far as to try reinstalling but it didn't work.
This morning, while trying to record bumpers, I recorded my voice, only to find it recording at a much deeper register than usual. I had no effects on it, but it sounded as though the pitch was being bent somehow. Also, while recording my voice, I usually have the monitor on (while listening through headphones), and couldn't hear the background music that I use to assist in timing.
Any ideas on how to fix these issues?
I'm not sure if the two things are related, or not. I just need to get it fixed. I've tried reinstalling, to no avail.

"Audio file “Male Voice#16.aif” not found."
did you copy and paste between projects?
recording at a much deeper register than usual.
what equipment are you using?
couldn't hear the background music that I use to assist in timing.
were any tracks soloed or muted? have you deleted any tracks?

Music and voice over does not play in iMovie

Music and voice-over does not play in iMovie

I am having the same problem with my iTunes. Support had me uninstall everything and reinstall iTunes again thinking it was corrupt. I did that and it worked for a couple of days. Now they say that cannot help since it is iTunes and not my iPhone and sent me here. Sometimes I can get it to work sporadically if I reboot my laptop a couple of times, but I have rebooted a few times already and nothing plays...no song previews, nothing from my library. iPods and iPhone play fine, it is isolated only to iTunes and is super frustrating. I get the same task bar up top as if it were going to play, but the play timer doesn't start. Help please!!!

My Iphone 5 voice speaker is not working.I'm not able to hear the voice of the person calling.But when I put my iphone 5 on speaker mode, things seem ok.Please provide me some suggestions.

My Iphone 5 voice speaker is not working.I'm not able to hear the voice of the person calling.But when I put my iphone 5 on speaker mode, things seem ok.Please provide me some suggestions.

Hello rizvijunaid,
Thank you for providing the details of the issue you are experiencing with calls on your iPhone. I recommend following the steps in the article below for the issue you described:
iPhone: Receiver and call audio quality issues
http://support.apple.com/kb/ts5196
Thank you for using Apple Support Communities.
Best,
Sheila M.

My USB port (closest to the screen) is not working? And what is an IR Receiver in my USB port?

Hi everyone,
     I recently found out that my USB port, closest to my screen, is not working. Before I called Apple Care for help, I performed a PRAM and a SMC RESET, which unfortunately did not work. I called Apple Care and they help me troubleshoot simple resets such as, shutdowns and restarts. The representative I spoke with conluded that the physical hardware has an issue and must be brought to the Apple Store for a diagnosis. I called the Apple Store to at least budget the fee for getting a USB port fixed and it's about $300.00. I never dropped my macbook or had any sort tactile encounterment with hard surfaces by dropping or hitting. I don't understand how my macbook pro would be physically damaged. I then thought maybe my software was out of date (right now I am running 10.9 Mavericks) or I forgot to do the minor software updates, but I was at a lost again because my macbook is up-to-date. I searched for further help and found a way to monitor what's plugged into my usb ports. (I read in the apple forums that a girl had nothing in her usb ports, but upon looking at the System Information> Hardware> USB, that the macbook recognizes that there are drives in the ports) I looked at my ports; one is being used by wirless mouse (the port that works) and the other (the port that doesnt work) is being used by an "IR RECEIVER". Now, is the IR Receiver actually using that port and that's why my macbook cannot recognize other devices inserted into that port? Or is the IR RECEIVER suppose to be in that port and that the hardware for that port is simply damaged (which would mean I need $300.00 to get that fixed)? I know this is a lot, but someone help me?
(PORT THAT WORKS)
USB Hi-Speed Bus:
Host Controller Location:          Built-in USB
Host Controller Driver:          AppleUSBEHCI
PCI Device ID:          0x1c2d
PCI Revision ID:          0x0005
PCI Vendor ID:          0x8086
Bus Number:          0xfa
FaceTime HD Camera (Built-in):
Product ID:          0x8509
Vendor ID:          0x05ac (Apple Inc.)
Version:           5.16
Serial Number:          DJHBAJ06VRDH7FL0
Speed:          Up to 480 Mb/sec
Manufacturer:          Apple Inc.
Location ID:          0xfa200000 / 3
Current Available (mA):          500
Current Required (mA):          500
Hub:
Product ID:          0x2513
Vendor ID:          0x0424 (SMSC)
Version:           b.b3
Speed:          Up to 480 Mb/sec
Location ID:          0xfa100000 / 2
Current Available (mA):          500
Current Required (mA):          2
Microsoft® Nano Transceiver v2.0:
Product ID:          0x0745
Vendor ID:          0x045e (Microsoft Corporation)
Version:           6.34
Speed:          Up to 12 Mb/sec
Manufacturer:          Microsoft
Location ID:          0xfa130000 / 6
Current Available (mA):          500
Current Required (mA):          100
Apple Internal Keyboard / Trackpad:
Product ID:          0x0252
Vendor ID:          0x05ac (Apple Inc.)
Version:           1.18
Speed:          Up to 12 Mb/sec
Manufacturer:          Apple Inc.
Location ID:          0xfa120000 / 5
Current Available (mA):          500
Current Required (mA):          40
BRCM2070 Hub:
Product ID:          0x4500
Vendor ID:          0x0a5c (Broadcom Corp.)
Version:           1.00
Speed:          Up to 12 Mb/sec
Manufacturer:          Apple Inc.
Location ID:          0xfa110000 / 4
Current Available (mA):          500
Current Required (mA):          94
Bluetooth USB Host Controller:
Product ID:          0x821a
Vendor ID:          0x05ac (Apple Inc.)
Version:           0.42
Speed:          Up to 12 Mb/sec
Manufacturer:          Apple Inc.
Location ID:          0xfa113000 / 8
Current Available (mA):          500
Current Required (mA):          0
(PORT THAT DOESN'T WORK)
USB Hi-Speed Bus:
Host Controller Location:          Built-in USB
Host Controller Driver:          AppleUSBEHCI
PCI Device ID:          0x1c26
PCI Revision ID:          0x0005
PCI Vendor ID:          0x8086
Bus Number:          0xfd
Hub:
Product ID:          0x2513
Vendor ID:          0x0424 (SMSC)
Version:           b.b3
Speed:          Up to 480 Mb/sec
Location ID:          0xfd100000 / 2
Current Available (mA):          500
Current Required (mA):          2
IR Receiver:
Product ID:          0x8242
Vendor ID:          0x05ac (Apple Inc.)
Version:           0.16
Speed:          Up to 1.5 Mb/sec
Manufacturer:          Apple Computer, Inc.
Location ID:          0xfd110000 / 3
Current Available (mA):          500
Current Required (mA):          100

I can help with the "IR Receiver" part of your question. That's the piece of hardware inside older MacBook Pros (MBPs) that lets them work with the Apple Remote. "IR" is the standard abbreviation for "infrared," the portion of the electromagnetic spectrum used by remotes for many common devices (stereos, cable boxes, Apple TVs, etc.). The remote sends a coded stream of IR pulses; a corresponding receiver in the target device "sees" the infrared light and decodes it. The MBP's internal IR Receiver sends the received signals to the processor via USB through an internal hub.
The most recent MacBook Pros have dropped the IR receiver and no longer work with the Apple Remote.

USB audio input to voice-over tool not working

Similar Messages

Maybe you are looking for