USB audio interface vs AC powered interface

Is a USB audio interface as good as an AC powered audio interface. Both are in the same price range.
When I say "as good" I mean sonically speaking, not in terms of features.

http://www.guitarcenter.com/Cakewalk-UA-1G-USB-Audio-Device-105346530-i1448466.g c?source=4WWRWXGB
http://www.zzounds.com/item--MDOFWSOLO

Similar Messages

  • L305SD-S5874 Audio recording issues to USB Audio Interface

    I am hearing snaps and pops recording audio through a USB audio interface attached to my laptop.I am using an external Hard Disk connected to a card buss e sata interface. Audio plays fine but snaps and pops are heard when
    recording or even when an input channel is selected but idle.I have the latest drivers installed.People in other forums are saying that these problems  are due to my using a " cheap" laptop with poor IRQ sharing implementation in the chipset.Is anyone using a similar computer this way with no problems ? I have recorded audio for years to much less powered computers with good results.

    Sounds like you're listening to the same source (the X6) being played twice.
    Could be you are hearing  MIDI thru playback as well as Logic's "Software Monitoring" you must also be enabling a MIDI track for recording. If you unhook the MIDI connection from the X6 does the hollow sound go away.
    What Audio interface are you using? The other possibility is your Audio Interface has "Direct Monitoring" this allows you to monitor the audio inputs before it goes into the computer. Having Logic's Software Monitoring enable along with Direct Monitoring would also produce the hollow sound.
    I suggest the thorough reading of the manual so you understand what all the preferences do. Most of the time it is better to read and understand/experiment on your own. It's one thing to be shown something another to figure it out for yourself.
    Here's a Link to all of the Preferences/Audio settings.
    http://help.apple.com/logicpro/mac/10/#lgcpbb81aca5

  • Noises on external USB audio interface (Yamaha MW12) with Snow Leopard

    Hi there,
    I got an issue with strong noises (kind of distortion) while playing all kind of music/sounds ( itunes/Reason/Cubase) via an external USB audio device (Yamaha MW12 mixer).
    Some important facts:
    + This had not been from the very first beginning of changing to snow leopard
    + but never appeared on "leopard"
    + Yamaha mixer is still working fine with my MS-windows computer
    + latest Asio driver by Yamaha is not helping.
    + internal audio of my Mac Book Pro is working fine.
    As this issue just appears 2 days before, without any change or installation on my system, I really wonder, what could be happen. As Yamaha mixer is still working fine with other computer, I expect some driver in MacOS to be the problem (as internal audio HW is working fine).
    Does anybody else, know, what to do? (before I change back to MacOS 10.5)
    Has anybody else have seen a similar issue?
    Thanks for helping in advance.
    Merry christmas,
    Mat
    Message was edited by: d-trich

    Hi,
    just one addon.
    + Changed USB ports on MacBook and it was fine on the second used.
    + Nevertheless, noise remains on the originaly used port
    + all other connected devices as mouse and midi interface are fully functional on both ports
    It still looks like a driver issue. Nevertheless, could it be a hardware issue with the USB port in my MacBook then? Even if all other tried devices are functional?
    cheers, Mat

  • Live Capture with a camera via firewire and usb audio interface

    I am trying to do a live capture through Final Cut 7.
    I want the video feed through the firewire from my HVX200 and the audio feed from a 4 channel usb audio interface (Alesis iO4).
    When I have both audio and video input coming in from the HVX200, the live capture works fine.
    However, when I change the audio input so that it is coming from the usb audio interface, final cut has an error message saying "Video is not available."
    During the preview, I see the video clearly and am getting levels from the iO4.
    But when I try to capture, I get the error message.
    Is it a processor issue (I've attached my specs below) with problems handling 2 separate inputs?
    I'm not quite sure what the problem is.
    Any input is greatly appreciated.
    Thanks!
    Model Name:          MacBook Pro
      Model Identifier:          MacBookPro5,3
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.66 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          3 MB
      Memory:          4 GB
      Bus Speed:          1.07 GHz

    Hi MtD,
    Yes I am changing the Capture preset to iO4.  Once that happens, it lets me run both the camera and the iO4 into the laptop but then an error message pops up the moment I try to capture it.
    I was only trying to use 3 out of the 4 channels of the iO4.
    Thanks!

  • I recently bought a dbx hardware compressor and am not quite sure how to use it in logic express 9. I hav a focusrite saffire 6 usb audio interface and am not dont how to use it in logic. Please help???

    I recently bought a dbx hardware compressor and am not quite sure how to use it in logic express 9. I hav a focusrite saffire 6 usb audio interface and am not dont how to use it in logic. Please help???

    MUYconfundido wrote:
    Pancenter,
    Thanks for the response, but I do not have a midi interface. I am using a midi to usb connector cable, thus bypassing the need for a Midi interface.
    The Mac reads the USB cable as a midi device, but not the keyboard that I am trying to use as a controller. I have tried it with my korg sp 300 and with my Nord Electro 2.
    Thoughts?
    Thanks,
    Tristan
    Tristan...
    This is what you have, correct?
    http://www.alesis.com/usbmidicable
    This from Alesis..
    "The AudioLink Series USB cable receives and outputs MIDI signal thanks to its internal interface. The USB-MIDI Cable connects plug-and-play to your Mac or PC for an all-in-one USB-MIDI solution."
    Notice, -internal interface-. What you have is a simple USB MIDI Interface. Most MIDI interfaces are USB.
    My point is (was), MIDI OUT of the Korg goes to the connector marked MIDI IN on the Alesis, those new to MIDI often get this wrong.
    pancenter-

  • Hello, I just wanted to know when an update would be available for my mac mini server os x lion to resolve the issues regarding my m-audio fastrack pro usb audio interface (no midi messages recognized)

    Hello, I just wanted to know when an update would be available for my mac mini server os x lion to resolve the issues regarding my m-audio fastrack pro usb audio interface (no midi messages recognized)

    Have you reported your problems to Apple?
    BugReporter
    <http://bugreporter.apple.com>
    Free ADC (Apple Developer Connection) account needed for BugReporter.
    Anyone can get a free account at:
    <http://developer.apple.com/programs/register/>
    And/Or
    Mac OS X Feedback<http://www.apple.com/feedback/macosx.html>

  • USB audio interface

    Hey guys,
    I have a USB audio interface and I'm not sure how to get it working on Arch. It actually randomly started working one day when my sound settings in gnome started to show more than just "Digital Output (S/PDIF) - Built-in Audio" for possible output devices. One of those extra devices sent audio to the interface. Those entries just disappeared though and I'm not sure how to get them back. I'm using ALSA.
    I'm not sure what additional information you may need.
    Thanks

    Have you looked on the ALSA wiki about USB sound devices?
    https://wiki.archlinux.org/index.php/Ad … ound_cards

  • Set up USB audio interface in lion osx 10.7?

    Hi
    Having no success in connecting two USB audio interfaces in lion os x 10.7.2.
    One is a focusrite saffire 6 USB
    The other is a numark omni control
    Have installed drivers for both (from their installation discs)
    Neither is being recognised - have attempted to change input/output in sounds (within system pref) - simply no option there to select either
    Is it anything to do with them being USB 1.1 perhaps?
    Any ideas?

    Thanks for the advice mate.
    I should point out that I am without home broadband at present...
    but before I picked up your message, I had checked both the numark and focusrite websites on my iPhone using 3G connection. I was able to download, transfer and install the current numark driver from my phone to my desktop - and the omni control appears to be working fine now.
    I wasn't able to download the focusrite USB driver to my iPhone for some reason though. Better head out with a memory stick to use proper t'internet at my sister's tomorrow I guess!
    I do wish that it was as easy to setup audio on new os x as on my novation xiosynth - it truly seems to be a 'plug and play' device.
    Anyhow, much appreciated - thank you again for posting me the links.
    Have a great day

  • USB Audio Interface with bad latency problems under bootcamp

    Hi everyone,
    I am currently running an Edirol UA-25 USB audio interface under Mac OS X for my normal music-listening needs. Everything works fine, and there is next to no latency when messing around in Garageband .
    However, when I switch into bootcamp to use Cubase SX 3 for audio production and sequencing (has all my windows-only VST instruments), the interface pops and crackles extremely. It's almost as if the USB interface is losing sync..?
    When I turn the buffer up on the drivers, this stops, but it is annoying as I like to have low latency when recording for direct monitoring.
    Can anyone give me any insight into why this might be happening?
    I know this is an audiophile-type question, but I thought I might as well give it a go. Or heck, if you wanna direct me somewhere where they might be able to help me!
    Cheers!
    Chris
    P.S. Using a MBP 2.5GHZ 2GB RAM

    when you select , lets say the USB device in your audio preferences, it will be used as the input and output device. You can use the USB interface's audio outs plugged into your mixer, and use speakers or the headphone jack. When you create an aggregate device, using the USB device and your built in audio, and choose it in your audio preferences, this allows you to use the inputs and outputs of both the USB interface and your built in audio from your mac. So now you can record from one device while listening back on another. meaning you can record the audio from the USB device and listen back using your Mac speakers or from headphones plugged into your mac.
    if you get a better audio interface, one with mic inputs, you will still need to connect it to speakers or plug in headphones to it to hear audio. If you have the budget, a dedicated firewire audio interface will usually give better results, in audio quality, than a behringer mixer and a usb interface.

  • Audio error with garageband and external usb audio interface

    I am using Garageband 2.0.3. under ios 8.0.2 on my iPad 3 and via camera adapter a USB audio interface Focusrite Scarlett 2i4 or a Presonus iTwo.
    When I start Garageband, it works well, the audio interfaces are recognized and I can record a track.
    As soon as I switch from instrumtent to track view, the audio path is completely disturbed and all I can hear is some noise from the speaker.
    Then I have to unplug the usb cable and plug it in again. Then audio works until I switch back to the instrument menu.
    When I use the headphone output only there is no problem with Garageband and everything works fine.
    Other applications audio applications don't show any error with each of the two audio interfaces.
    Any feedback is very much appreciated, thanks.
    Harald

    I have this exact issue.  However, I tried the Loopy app after after GB crashed and received an error message saying that core audio is not available.  Rebooting resolves but the problem repeats.  Any suggestions as to fixes?  Btw; I have no such problem with Ipad 2 and ios 7.

  • Audio input setup with a USB audio interface

    When i plug my USB audio interface into the USB port, GB gives me a message that it has been detected, and it shows up in the audio input preferences.
    But it doesn't seem to be listening. Signals light up on the interface when i speak into the mike, but not on my GB.
    I also switched to the device I'm using in my Mac input sound preferences.
    Hints, anyone?

    Nothing - it's a new project. Thought maybe I ought to get the input device working before starting.

  • USB Audio Interface not working anymore

    I have a Presonus Audiobox USB Audio Interface. Worked perfectly until I updated to Mavericks, now I get a screeching noise when used and the sound switches to the built in Mac sound.
    So then I reboot and it does it again. The Audio box doesnt have any software since its a plug and play. Any help?

    Hi ketpiano!
    I have an article here for you that may help you resolve this issue:
    Macintosh: Solutions for noise in the audio signal
    http://support.apple.com/kb/HT2743
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • Mobile usb audio/midi interface with preamps isn't working with GB

    I have a M-audio mobile usb audio/midi interface with preamps and fastTrack Pro software that i'm having trouble using with garage band.. I just got this Mac os x 10.4.10 and i'm unfamiliar with GB and how to get a audio signal to register from my mic through the mobile usb audio/midi interface to GB.
    any suggestions??

    http://www.bulletsandbones.com/GB/GBFAQ.html#selectinterface ??

  • My roland Ua-25ex usb audio interface audio input no recognised by macbook pro running osx 10.

    my roland Ua-25ex usb audio interface audio input not recognised by macbook pro running osx 10. ...the audio outputs are ok but the (audio in) input preference  for the UA-25ex is greyed out and the sliders for input volume etc  are disabled ... and I can only record voice by using the macbook pros onboad microphone not the usb interface 

    Logic Users
    Looooong Tutorial for beginners
    MacPro Videos on Logic
    i have all the logics but i don't know them deeply.
    i like some of the music files/loops you get bundled with it, there's plenty to get started.

  • No input using usb audio interface

    I recently bought a Tascam US-1641 USB Audio Interface that Im running with logic studio 8. I'm not getting any audio coming through when recording. I have selected the item in preferences but im not getting any input or output.
    anyone had similar problems or know where i might have made a stupid error.
    David Docherty

    Hi
    Firstly, sorry for not being able to help as I share the same problem.
    I've recently bought a novation nio 2/4 audio interface for logic pro 8.
    I have the same problem with getting sound from it. What are you trying to record e.g. instrument?
    I also have a usb midi keyboard that I plugged straight in and got sound through logic straight away so I don't know why the audio interface should be much different.
    Please let me know if you happen to stumble across an answer as it is driving me crazy!

Maybe you are looking for

  • Printing to PDF from MS Office -  Adobe 9

    I've recently upgraded to Adobe Reader 9 & have Win XP op sys. There is no longer an "Adobe PDF" as a printer option when wanting to print/save MS Office files to pdf format. Is there another way?

  • Using 3GS as n iPod Touch

    Hi everyone, I just bought the iPhone4 and want to give my son my old 3GS to use as an iPod touch. I want him to be able to sync his songs and stuff from his iMac. The 3GS still has my old SIM card since I couldn't use it for the iPhone4. If I take t

  • Loadjava ...a web proxy generated by JDeveloper

    I'll try to be brief... two db servers communicate throgh a web service.Based on that Web Service( ws-for short) I'm doing a web proxy,witch I am loading into a database...and then I can do calls to it through pl/sql(create function ...as laguage jav

  • JNI: How to specify classpath?

    Currently I have a working C app that calls a function in a java class whose .class file is in the same directory as the C executable. I would like to place the class file in another directory and still be able to run the C code. How is this done? I

  • Jsp - php integration

    Hi all, First up all I am very new to java. I have a web application developed on php. I also have a CRM (customer relation management) delevoped on jsp.So I want to pass some values from php to java so that a popup window showing details of customer