USB Audio source not getting to the speakers

I have a turntable audio source connected to my MacBook Pro with Mavericks OS. The device shows up on the Sound pane in System Preferences in the input screen as USB Audio CODEC and the input level bar graph moves when I try to play a record on it. The output screen is set to Internal Speakers, volume is turned up and the mute is off. In other words all the obvious stuff is done.
The problem is that there is no audio coming out of the speakers.
I have iTunes and can play audio files through the speakers just fine. I have a Bluetooth speaker and it also works just fine. The Bluetooth device also shows up in the output screen of the Sound pane of System Preferences.
Any ideas about why the sound from the USB device seems to play on the MBP but does not come out of the speakers or a set of headphones.
Thanks,
Ted

I found the solution in another discussion. The audio program Audacity did the trick.
One needs to have a client like this to process the USB input.
Works great.
Thanks for looking.
Ted

Similar Messages

USB audio out not getting to DAC

Just set up my Macbook late 2007 OS 10.7.5 to a Denon DA-300USB DAC.
I'm successfully playing files out of JRiver Media Center software via Mac's digital audio out through an optical audio cable. But optical audio has limitations on bitrate, only to 24-bit/96khz.
I want to use higher rates and have some higher res files. The DA-300USB can process up to 24/192 and DSD files using USB.
When I connect the DAC using USB and power on the DAC, the sound preference pane adds the option "Audio Out High Speed USB," which is what I select. This indicates the computer is seeing the DAC.
But when I play a file, the DAC display reads "unlock," meaning it's not receiving audio. And the sound plays through the internal speakers, Ugh!
Denon says no driver is needed for this device -- indeed the computer does detect a USB audio connection when the DAC is on.
Is there something I'm missing?

According to Crutchfield, this DAC can only process ALAC up to 96 kHz. Can you get lower res files to play using the USB connection?

Audio not heard from the speakers when iPhone connected to the power cord.

somtimes no audio heard from external speakers at all, when iPhone is connected to the power cord.
The troubleshoot I have done successfully was unpluging the power cord from the back of the iPhone then it rests the audio and audio can be heard through the speakers. This issue needs to be addressed to Apple tech support for permanent resolution.

Tell Apple. This is a user to user forum, we are iphone users like you.
You can call Apple at 1 800 my iphone or supply feedback to Apple at:
www.apple.com/feedback/iphone.html

USB Audio Device Not Recognized by Stream 7 tablet

Half the reason I bought the Stream 7 was to use it has a music player with my iBaso D2 USB Audio DAC Headdphone Amp.
The device is recognnized by my Win 8.1 desktop and every other computer I've plugged it into. Why it is not recognized as an audio playback device is beyond me. I've tried all of the suggestions that I've been able to find on the net without any luck. Is therte some reason why this function has been disabled on the Strwea 7?
This question was solved.
View Solution.

Problem Solved!
It turned out to be a combination of the usb cable and the OTG USB hub. On my desktop the iBaso was cable specific as to the device being recognized. When I tried the working cable witht the OTG hub on the Stream 7 it failed as usual. But when I tried the cheap monoprice adapter it worked.
The usb audio solves the horrible sound problem with the Stream 7 for anybody who is lookiing for a Fix.
The OTG hub works with a mouse and a mSata drive perfectly but not with the iBAso DAC.
Thanks to everyone who replied for keeping me trying.

My 4th Gen Ipod touch will not get past the apple logo

My 4th Gen Ipod touch will not get past the apple logo (unless the battery is dead, Then it tell me to charge it). Once it gave me the connect to itunes screen. I clicked restore in itunes but the ipod went back to the apple logo before the update download finished. I tried calling apple but my over the phone technical support just expired. PLEASE HELP!

This can be a corrupted software/firmware on your iPod touch. If the recovery mode you did was not forced, then try to force it into recovery mode. This is how:
1. Force it to shut down (note: this sort of shut down should not be preformed unless you are in a situation like this because it is a hardware shutdown and will not attempt to unload software, save unsaved files, safely stop system processes, etc.) to do this, hold down the power/sleep button and home button for about 7 or 10 secs. Also I might be incorrect but I heard that you can just hold down the sleep and home button until the screen goes blank and then immediately let go.
2. Have iTunes running. Hold down the home button and plug the USB cable that came with your iPod into it. Keep on holding on the home button until a picture of a USB cable going into the iTunes logo appears. You are now in a forced recovery mode. (In case your not so tech-savvy forced recovery is the same as a normal recovery mode that an iPod might do if it knows an update or restore failed.)
3. iTunes should have shown a pop-up message about it found a iPod in recovery mode. Click OK, click your iPod from the sidebar and click restore. The iPod will show the apple logo for a while and iTunes will say "preparing iPod for restore" and then "waiting for iPod" this was the longest part of updates for me.
4. iPod will reboot when restore is completed. When I update my iPod it one time showed the apple logo for one whole sync until it showed the slide to unlock screen, so do not worry. P.S if that does not work do a DFU mode restore ( I've been told DFU mode stands for device firmware update mode) I'm running out of room, so google it. Hope this helped ;)

I installed win8 64bit on macbook pro. everything running good but i am not getting sound in speakers. i am getting sound in earphone/headphones but not in main speakers.

i installed win8 64bit on macbook pro. everything running good but i am not getting sound in speakers. i am getting sound in earphone/headphones but not in main speakers.

Have you checked System Preferences -> Sound to see the Output when nothing is plugged in the headphone jack? Also, check if the headphone jack shows a faint read-light, which is the optical laser.

Third party audio apps not getting recognized

Why do most of my third party audio apps not get recognized by the "inter-app audio apps" feature in the new version of Garageband? I have version 3 of the IPad. It only recognizes Galileo (organ app) and not Sunrizer, Sample Tank, etc.

They are simply not enabled for that yet, maybe they will in the future; just find those who are. I think Audiobus, a 5 dollar app, can connect to more programs, and those too have to support it, but the supported program list is probably longer. Audiobus is very popular

I have no sound for games in my iPad. I have tried the reset but it does not work. The speakers work as I have sound for music and videos.

I have no sound for games in my iPad. I have tried the reset but it does not work. The speakers work as I have sound for music and videos.

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) http://support.apple.com/kb/ht1430
Check your settings. The iPads have a small switch on the right edge. http://support.apple.com/kb/ht1430 It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
iPhone: Can’t hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
To solve some sound problems, just follow these simple steps
1. Go to Settings
2. Tap on General
3. Tap on Reset
4. Tap on Reset All Settings
What this effectively does is to reset some of your Settings to factory default. It’s not a complete removal of settings. It removes all of your preferences for Wi-Fi, Bluetooth, Do No Disturb, Notifications, General, Sounds, Brightness & Wallpaper and Privacy. It doesn’t affect your data. All of your email accounts will remain intact, as well as any SMS text or iMessages.
 Cheers, Tom

External audio source not recognized

Hey, just got a mac mini with intel package yesterday at my local Apple dealer. Included keyboard, mouse, monitor and speakers. Everything appears to be working beautifully, except the mini is not recognizing the speakers. All the cords are in the right place, the volume is up, power is on, but it is only using the internal speakers. Does not even list the speakers in the sound utility. Any ideas as to what the problem is? The speakers? The cables? Or the output jack in the mini? Any assistance would be greatly appreciated.
Mac mini intel core duo Mac OS X (10.4.6) 1.66 GHz, 80 GB HD

With the package we purchased, got a set of Elecom speakers, worth about $50. Not familiar with the name, so brought them in hoping they could hook them up to a demo Mac mini to test them. Turned out to be a bad cable. Got a new set and was sure I plugged them into the right jack (the one with the headphone symbol above it), turned them on and all was good. Just a cheap pair of speakers was all. Sorry, dunno if this was helpful. Maybe it's your speakers? Rather than the mini's audio jack.
Mac mini intel core duo Mac OS X (10.4.6) 1.66 GHz, 80 GB HD

I have an iPhone 4 and my lock button is jammed and I also can not touch anything on the left side of my screen well as any pop ups from the phone itself, so i can not get past the set up stage in reset process...how can i fix it/can it be fixed?

I have an iPhone 4 and my lock button is jammed and I also can not touch anything on the left side of my screen well as any pop ups from the phone itself, so i can not get past the set up stage in reset process...how can i fix it/can it be fixed?

Make an appointment at the genius bar and get the phone replaced.

Reg : data is not getting in the output

hi team,
             data is not getting in the output, but it is getting in the debug mode
REPORT ZSAPP10 .
*tables : pernr.
TABLES : PA0001.
type-pools : slis.
types : begin of itab,
        pernr type pernr,
        orgeh type orgeh,
        abkrs type abkrs,
        end of itab,
        begin of itab2,
        pernr type pernr,
        vorna type pad_vorna,
        nachn type pad_nachn,
        end of itab2.
parameter : p_pernr like pa0001-pernr.
*DATA: g_cprog tYPE SY-CPROG.
data : i_itab1 type table of itab initial size 0,
       i_itab2 type table of itab2 initial size 0.
data : w_itab type itab,
       w_itab2 type itab2.
data : t_fieldcat type slis_t_fieldcat_alv,
        w_fieldcat type slis_fieldcat_alv.
data : t_event type slis_t_event,
        w_event type slis_alv_event.
data : t_listheader type slis_t_listheader,
       w_listheader type slis_listheader.
*get pernr.
w_event-form = 'TOP_OF_PAGE'.
w_event-form = 'sub1'.
append w_event to t_event.
w_listheader-typ = 'H'.
w_listheader-info = 'this is new top of page'.
append w_listheader to t_listheader.
select pernr
       orgeh
       abkrs from pa0001 into table i_itab1 where pernr = p_pernr.
w_fieldcat-col_pos = 1.
w_fieldcat-seltext_m = 'personnal no'.
w_fieldcat-fieldname = 'pernr'.
w_fieldcat-tabname = 'i_itab1'.
w_fieldcat-outputlen = '20'.
append w_fieldcat to t_fieldcat.
w_fieldcat-col_pos = 2.
w_fieldcat-seltext_m = 'org. unit'.
w_fieldcat-tabname = 'i_itab1'.
w_fieldcat-fieldname = 'orgeh'.
w_fieldcat-outputlen = '20'.
append w_fieldcat to t_fieldcat.
w_fieldcat-col_pos = 3.
w_fieldcat-seltext_m = 'payroll area'.
w_fieldcat-tabname = 'i_itab1'.
w_fieldcat-fieldname = 'abkrs'.
w_fieldcat-outputlen = '20'.
append w_fieldcat to t_fieldcat.
*g_cprog = SY-CPROG.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
           I_INTERFACE_CHECK                 = ' '
           I_BYPASSING_BUFFER                =
           I_BUFFER_ACTIVE                   = ' '
             I_CALLBACK_PROGRAM                = SY-CPROG
           I_CALLBACK_PF_STATUS_SET          = ' '
           I_CALLBACK_USER_COMMAND           = ' '
           I_CALLBACK_TOP_OF_PAGE            = ' '
           I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
           I_CALLBACK_HTML_END_OF_LIST       = ' '
           I_STRUCTURE_NAME                  =
           I_BACKGROUND_ID                   = ' '
           I_GRID_TITLE                      =
           I_GRID_SETTINGS                   =
           IS_LAYOUT                         =
             IT_FIELDCAT                       = T_FIELDCAT
           IT_EXCLUDING                      =
           IT_SPECIAL_GROUPS                 =
           IT_SORT                           =
           IT_FILTER                         =
           IS_SEL_HIDE                       =
           I_DEFAULT                         = 'X'
           I_SAVE                            = ' '
           IS_VARIANT                        =
             IT_EVENTS                         = T_EVENT
           IT_EVENT_EXIT                     =
           IS_PRINT                          =
           IS_REPREP_ID                      =
           I_SCREEN_START_COLUMN             = 0
           I_SCREEN_START_LINE               = 0
           I_SCREEN_END_COLUMN               = 0
           I_SCREEN_END_LINE                 = 0
           IT_ALV_GRAPHICS                   =
           IT_ADD_FIELDCAT                   =
           IT_HYPERLINK                      =
           I_HTML_HEIGHT_TOP                 =
           I_HTML_HEIGHT_END                 =
           IT_EXCEPT_QINFO                   =
         IMPORTING
           E_EXIT_CAUSED_BY_CALLER           =
           ES_EXIT_CAUSED_BY_USER            =
             TABLES
             T_OUTTAB                          = I_ITAB1[]
          EXCEPTIONS
            PROGRAM_ERROR                     = 1
            OTHERS                            = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
          WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
      FORM sub1                                                     *
FORM sub1.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      IT_LIST_COMMENTARY       = t_listheader
I_LOGO                   =
I_END_OF_LIST_GRID       =
ENDFORM.                                                    " sub1

write this way...
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
        i_callback_program                = w_repid
        is_layout                = wa_layout
        i_callback_user_command = 'USER_COMMAND_ACCT'
        i_grid_title             = 'Document Status Report'
         it_fieldcat                       = it_fcat[]
     IT_SORT                        = IT_SORT[]
         it_events                = it_events
         TABLES
           t_outtab                        = it_final_data[]
      EXCEPTIONS
        program_error                     = 1
        OTHERS                            = 2.

Pages 2.0 will not get past the "getting started" screen

i just updated pages to 2.0 on ipad 2 retina (ios 7.0.2) and now i cannot open pages, it will not get past the "getting started" screen
has anyone else experienced something similar?

Had the same problem. This sovled it for me:
Just let it load.
In Keynote, I didn't have so many documents, so the freeze didn't take too long- that's how I noticed it's just a freeze while loading.
For pages it took much longer. You can also turn off iCloud in settings for Pages, Keynote, etc. open it, re-enable iCloud in settings app again and quick switch back to pages (double-click home button). It will freeze up again, but after a while after all documents have been pulled from iCloud, it will be back to normal.

HT4759 Please I need a help I cannot backup my ipad and can not get into the icloud storage. What would I do to get into my ipad? please I need your help

Please I need a help. I cannot backup my ipad and can not get into the iclous storage to delet them, because its read icloud storage is full. Please do you have a knowledge of how I can get rid of the message and get into the ipad?

Welcome to the Apple Community.
You might try a forced shutdown to begin with, hold down the top and home buttons together until the device shuts down, then restart it.

Hi I newly started using Iphone 6, I am not getting all the applications list under Use Cellular date for to restrict my unwanted apps on cellular data

Hi I newly started using Iphone 6, I am not getting all the applications list under Use Cellular date for to restrict my unwanted apps on cellular data
Please help me out

Hi Rajesh778484,
Welcome to the Apple Support Communities!
I understand that some of your applications are not appearing under Settings > Cellular on your iPhone so that you can restrict or allow use of cellular data. If you have some installed applications on your iPhone that are not showing here, the first troubleshooting step I would suggest would be to reset your iPhone. Please refer to the attached article for information on how to perform a reset.
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Best regards,
Joe

Hi...m using a mac pro quad core.....its not booting up...i can only see the apple logo and a circle loading...could not get into the login screen

hi...m using a mac pro quad core.....its not booting up...i can only see the apple logo and a circle loading...could not get into the login screen...any suggestions please.....m in the middle of a project and now i have got this one
regards,
v.s.bharan

Welcome to Apple Discussions!
Do you keep your data backed up?
If not, you should always do so*:
http://www.macmaps.com/backup.html
You never know when a hard drive or a directory might go bad. Having a bootable clone is a must.
That link also shows you some tools you can use to recover data.
If you aren't backed up, try buying those tools first, before attempting to repair the directory.
Directory issues can be fixed with these tools*:
http://www.macmaps.com/directoryfaq.html

USB Audio source not getting to the speakers

Similar Messages

Maybe you are looking for