USB automount no longer working with upgrade to Gnome 2.30/udisks

Has anyone else had a problem with automounting of flash drives since the upgrade to Gnome 2.30 and udisks?

I have this problem too. Devices are mounted properly in /media, but there is no icon in nautilus/on desktop. Also there is no icon in gnome-mount applet.

Similar Messages

  • [SOLVED] USB 3G no longer works after upgrade to GNOME 3.8

    I did the 'big' update today, including upgrading to GNOME 3.8. Unfortunately, NetworkManager no longer picks up my 3G USB modem (which used to work fine before the update). Any pointers as to how I could debug this would be greatly appreciated.
    wvdial has never really worked for me, but gnome networkmanager used to pick up my device and the connection, and now simply acts as if it's no longer present. Attempting to follow the instructions on the wiki to re-setup my USB stick (the instructions I followed in the first place) no longer works. Did today's update cause the same problem for anybody else?
    **Update: After updating today to modemmanager 0.7.990-4 and running
    sudo systemctl enable ModemManager
    sudo systemctl start ModemManager
    I have full connectivity again with the built-in DW5550 mobile broadband card in my Dell Precision M6600 (including showing signal strength in the GNOME 3.8 top bar, etc). Thanks all for the help, and (most importantly) to whoever fixed up modemmanager!
    Last edited by dawid.loubser (2013-04-26 16:57:42)

    wvdial might also be a workaround, if one does not like to downgrade. In my case, I had to unset my PIN on the SIM card first. One can do that using a mobile phone, for example.
    Then
    # pacman -S wvdial
    in /etc/wvdial.conf, I put
    [Dialer Defaults]
    Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
    Modem Type = Analog Modem
    ISDN = 0
    Stupid Mode = 1
    Dial Attempts = 3
    Init1 = ATZ
    [Dialer huawei]
    Modem = /dev/serial/by-id/usb-ZTE_Incorporated_1_1_Surf-stick_MF19001MOD010000-if02-port0
    Baud = 115200
    [Dialer voda]
    Init3 = AT+CGDCONT=1,"IP","web.vodafone.de"
    [Dialer dial]
    Phone=*99**1#
    Username = umts
    Password = umts
    You can find out your modem name by looking it up with
    ls /dev/serial/by-id/
    In my case there were names containing the strings if00, if01 and if02, and if02 turned out to be the correct one. This depends on hardware.
    Also, in the "Init 3" line, you may have to replace "web.vodafone.de" according to your provider. The section "dial" seems to be quite universal from what I read on the web, so you may not have to change that.
    then
    # wvdial huawei voda dial
    and hope for the best.
    Disclaimer: I do not have a comprehensive understanding of what I did here, but it worked in my case and it might work for you, too.
    I noticed that the Defaults section makes a difference, because the one I just edited in above avoids some delay in dialing.
    Last edited by tobi-fankhaenel (2013-04-23 08:23:00)

  • Apple USB modem no longer works with Mountain Lion

    Now that I've upgraded my iMac to Mountain Lion my Apple USB modem no longer works.  Does anyone know of a software fix or have I just lost my faxing ability with this item and have to buy something else? 

    That's a very sad situation as the Official statement link above (http://support.apple.com/kb/ht3152) states that the modem cannot be used with any Windows. So Apple thinks that people investing in the ability to Fax and relying in Apple's good product only deserves to throw out their modems (because now it is useless on any platform)...

  • Third party contact form widgets no longer working with upgrade - PHP errors

    PHP seems to be even more screwed up with the latest update/upgrade to Muse.  The previous upgrade started producing the following error message when I uploaded my site via FTP:
    "1 Warning - Connection to PHP file failed. Unable to check if this web server supports PHP needed by Muse forms. Be sure the domain name entered in the FTP upload dialog is correct."
    However, everything worked and in participating in some queries here, it seemed to be an oddity versus anything serious (things still worked but an error message popped up for no real discernible reason)
    Since the latest update, however, widgets that I have from two different companies for the purpose of emailing me through the website, sending messages, etc, are no longer working and the following message is displayed upon hitting "submit"
    " Form PHP script is missing from web server, or PHP is not configured correctly on your web hosting provider. Check if the form PHP script has been uploaded correctly, then contact your hosting provider about PHP configuration."
    In checking with my web host provider, I was told
    "the page appears to use the script form-u31652.php which does exist on the
    server.
    Unfortunately that error is not specific enough to point us in the right
    direction. PHP is indeed working on the server. However, looking at the
    apache web server error logs I can see that the contact form appears to be
    looking for a file that does not exist.
    To trouble shoot this issue you will want to work with Muse to determine
    why the sites coding is looking for the file
    /usr/home/NAME/public_html/WEBSITE.com/null."
    Any ideas what this means and how to solve this would be great. I've tried re-uploading the entire website, figuring that maybe something wasn't being uploaded via "Modified Only" but it still is happening
    Thanks!

    That isn't what ended up fixing it, Sanjit. Thanks to this article PHP FAQ for Muse Synchronized Text and help from an online representative from Adobe, was able to troubleshoot with my web provider. Turns out the problem was that a while back Muse deleted the fcgi-bin directory (probably during the previous upgrade, as that is when the PHP errors started to surface with me and others). And it was never put back by Muse even during a clean/full reupload of the website.  Had to have my web provider do it manually.

  • Smartview indentation no longer working with upgrade

    We are currently running HFM and Smartview with Office 2010. We have updated Smartview from version 11.1.2.1.x Build 271 to 11.1.2.2.310 Build 247. The Zoom In function is no longer working properly.
    In the prior version:
    1. Zoom In = Next Level
    2. Member name Display = Member name and Description
    3. Indention = Subitems
    4. Ancestor Position = Top
    The new version has the same settings however since updating to the new version the indentation no longer happens. 
    Is anyone else experiencing this issue?  Is there a workaround?

    Hi,
    Below is the copy paste of the content from Oracle doc.
    Applies to:
    Hyperion Planning - Version 11.1.2.1.600 and later
    Information in this document applies to any platform.
    Symptoms
    Unable to use smartview column suppression features with an Essbase connection.
    - Start up excel and then go to the smartview menu -> Options -> Data Options -> Suppress Columns section is active
    - Establish an Essbase Shared Connection
    - Go into adhoc mode or just double click on a database to bring up the metadata.
    - Now go to smartview menu -> Options -> Data Options -> Suppress Columns section is grayed out.
    The above feature works fine with a Planning connection.
    Is this an Essbase connection limitation?
    Cause
    Installed the Smartview 11.1.2.1.103 (Build 100)
    Solution
    The following was mentioned in the 11.1.2.2.310 version of the Smart View User's Guide. The description for Suppress Columns was updated as follows:
    To streamline the grid, you can suppress columns that contain types of data that you do not need to view.
    Notes:
    -- In suppressed columns, cell references to Excel formulas are not updated.
    -- The Suppress Columns options are not available when connected to an Essbase data source.
    So from the above, it is not a supported feature when using an Essbase connection.

  • USB Mic no longer works with Skype after 7.1 updat...

    Using a USB headset with skype, worked with previous versions, works with other programs. I can hear people talk but they can't hear me! Skype detects the mic just fine but when I talk nobody can hear me. 
    I have tried updating drivers, re-installing skype, I have tried deleting my profile/preferences from the skype folder on my PC and starting from scratch, tried restarting my computer, re-installing my headset drivers, and tried restarting or re-plugging in my mic. Nothing works. Skype simply doesn't use my mic properly in the new version, previous versions did not have this problem, as I said mic works fine in all other programs. 

    Hi pa.elimination, Can you please reproduce the issue and provide logs as described in this link https://support.skype.com/en/faq/FA12321/how-do-i-​create-log-files under Skype for Windows Desktop and attach it to your post?
    This will help us investigate and solve the problem you are experiencing.
    Can you also try with the 7.0 version to see if that version solves your issue?
    http://download.skype.com/msi/SkypeSetup_7.0.0.105​.msi
    Thank you

  • USB stick no longer working after upgrade to 10.5.8

    Hello,
    On one my older Macbook Pros I just recently did the recommended upgrade to 10.5.8. Since then none of my memory sticks are longer being displayed in the finder window.
    Things that I have done
    -reboot
    -made sure that external drives are being dispalyed
    -In System Profile under USB I can see the hardware. If I try another brand USB key I can see the change in System Profile.
    -Other USB devices like mouse and printer are working ok
    -I have also tried an external hard drive
    All of these devices use to work fine are working fine on my newer Macbook Pros that are running 10.6.x
    Has anyone come across this ?
    Emir

    Boot in Safe Mode. See What is Safe Boot, Safe Mode? (Mac OS X)
    http://docs.info.apple.com/article.html?artnum=107392 Sometimes takes a while to run, but it usually "fixes" problems. Does it work when booted in Safe Mode?
     Cheers, Tom

  • Moving songs around on iPod no longer works with upgrade to iTunes 7

    Hi.
    I just upgraded iTunes 6 to 7 on Win XP. I used to be able to move songs around on my iPod, but I can no longer do this with the newer version. All of my songs have now been rearranged in a different order than it was originally and I can no longer rearrange them.
    Is this a known bug? Is there something I don't know about the new version? I've scanned all the menus and cannot determine if and how this can be done.
    Thanks!
      Windows XP  

    Update your QuickTime to v7.1.3 and see what happens.
    MJ

  • 6/9/11 update old usb keyboard no longer works with macbook pro

    Hi I have been using my old Imac usb keyboard with my macbook pro at work since I got my macbook pro. But as of yesterday I have not been able to use it anymore.  Any suggestions to a fix or do I have to buy a newer keyboard?  I need the numbers pad to entering data.
    Any suggestions would b great.
    Dharma

    Your message would be easier to decode if you had proofread it before posting.
    Does your keyboard work when the mouse is plugged directly into the computer instead of into the keyboard, or does the keyboard not work at all? If not at all, then it sounds as though you're right in guessing that the keyboard isn't getting power for some reason (bad cable? bad connection inside the KB? USB port on computer shut down?) If the KB works when the mouse isn't plugged into it, then the mouse and KB together are demanding more power than the computer's USB port can supply, and neither is getting what it needs when the mouse is connected to the KB. In that case, plug the mouse directly into the computer to use it.
    The USB port in your keyboard probably doesn't put out enough power for the mouse you are using. This is typical of older keyboards, which were designed to power old-style electromechanical mice rather than the laser mice that are commonplace today.

  • USB dongles no longer working with hub

    Hello,
    I am running Logic Pro and a couple of 3rd party plugins which require usb dongles. All of a sudden the usb dongles are no longer found when connected to my 4 port usb 2.0 hub. This was never an issue in the past. Any ideas what might have caused this to happen? thanks.

    I have this problem too. Devices are mounted properly in /media, but there is no icon in nautilus/on desktop. Also there is no icon in gnome-mount applet.

  • Selenium no longer working with upgrade of Firefox 22

    I just upgraded to Firefox 22 from 21 now all of my Selenium tests are breaking. Is anyone else having this issue and do you know how to fix it? Thanks
    Here is the error I am getting:
    [error] Unexpected Exception: fileName -> chrome://selenium-ide/content/selenium-core/scripts/htmlutils.js, lineNumber -> 309, columnNumber -> 8
    These test were running great before the upgrade.

    All,
    3Dee here again. I was able to solve my problem by upgrading my Selenium. Fixes were made to Selenium to support FF 22.
    Thanks to all who made the fixes!
    3Dee

  • All of a sudden, my 4th gen iPod Touch no longer works with my Apple TV, has Apple "upgraded" something to kill off this older unit? (IOS 6.1.2)

    All of a sudden, my iPod Touch (4th gen, IOS 6.1.6) no longer works with Airplay on my Apple TV.  It was working and still works as a 'remote' but not with Airplay which seems to indicate I've been abandoned by the message that pops up on the screen saying in essence "too bad you don't have IOS 7.1". 

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • Command, Control, and Option keys no longer works with Citrix Receiver after upgrading to OSX 10.9.5

    At first my keyboard did not work with Citrix Receiver after upgrading to OSX 10.9.5 and I found the workaround by using "cmd + tab," however, once my keyboard work within Citrix, the "command, control, and option" keys no longer work.  Does anyone have a remedy for this?

    Keyboard no longer works with Citrix Receiver after upgrading to OSX 10.9.5

  • HT6114 HP Office Jet Pro 8500 Scanner no longer works with Mavericks upgrade

    I have an all-in-one printer/copier/fax/scanner, HP Office Jet Pro 8500.  The scanner no longer works with the Mavericks upgrade.  Is it possible to get the scanner back in use?  The printer and fax is fine, but I really use the scanner a lot.  Please helap me.

    The following link to the HP Support site indicates that scanning is still supported for the OfficeJet Pro 8500 using Mavericks but also indicates that "you may need to scan in a different way than you did before you installed Mavericks." See the FAQ section of http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03967522&cc=us&dlc=en&lc=en &os=4159&product=3752456&sw_lang=#N1237

  • After updating my 3GS with ios5, my BMW usb interface no longer works

    After updating my iPhone 3gs with ios 5, my BMW usb interface no longer works.  I can no longer see my music on the screen and cannot control my music.  I tried my old Nano in my car and that works so I'm thinking it must be something with ios 5.  Any suggestions?

    Update:  I was able to resolve the problem by re-syncing the music on my iPhone in iTunes and then shutting down the phone and restarting it.  After that, I connected the usb cable from my car to the phone and it worked. 

Maybe you are looking for