USB Boot does not work on factory fresh device

SO we're working on adopting the surface pro 3 for our organization. I've just run into an issue. We're currently bootstrapping the SCCM OSD process off of USB thumbdrives, we have are working on upgrading to a supported PXE platform, but for now we have
to use the thumbdrives. The issue is, on a fresh, out-of-the-box Surface Pro 3, the Power-button + Volume Down will NOT boot of of USB. The only thing that works is to keep booting in the factory sysprep until it finally asks to take you to advanced recovery
options where you can then select the USB device and it works fine from there. After the device has been imaged, the volume down + power trick works every time, just not when straight out of the box. This is obviously an issue fore the guys doing the imaging
as it slows them down considerably. Any ideas why this is happening?

That sounds rough... I have new surface pro 3 devices and haven't encountered this problem. If I had to speculate, I would say you have a firmware issue.
Try this to confirm. Let the device boot up into the out of box image, and then let windows update patch the thing to completion and try again. Not all that comforting if indeed you have this problem... did you purchase them a few months ago
and are just now firing them up? Maybe the ones we have here have a later firmware.

Similar Messages

PCI USB Card Does NOT Work With Mass Storage Devices

I have a StarTech PCI card with 6 USB 2.0 ports that I inserted in my 500 MHz (overclocked) B&W Power Mac G3. It works great for any USB device EXCEPT for any hard drive or DVD/CD-RW drive. I checked the system.log file for errors. Nothing shows up in System Profiler or Disk Utility, obviously. Here's what it consistently says:
Dec 16 23:33:28 Geoff-Myers-Power-Mac-G3 kernel[0]: USBF: 674.997 [0xf9c000] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 6 of hub @ location: 0x62000000)
Dec 16 23:33:33 Geoff-Myers-Power-Mac-G3 kernel[0]: USBF: 679.977 [0xf9c000] The IOUSBFamily was not able to enumerate a device.
I'm running the latest version of Mac OS X Tiger 10.4.3. What is wrong? StarTech doesn't have a driver, but nothing should be necessary. Is there a 3rd party USB Mass Storage Device driver that might work better than the Apple generic driver? PLEASE HELP ME! I cannot live with USB 1.1.

Some users have reported problems with certain brand cards and their controller chipsets, so trying a different card may resolve the problem. Keyspan and Macally are often mentioned as being more "Mac-friendly" than some other lessser-known brands or generic cards. Does the card have a mini-power port to supplement the power requirements? With USB 2.0, each port is on a separate bus, so a card with six ports should have one. To minimize the overall draw on the available power, I prefer to install USB cards with as few ports as are needed.

Usb 3 does not work with my audio device

hi everybody
I've the same issue about my retina display and Usb 3,i have several audio device as AllenHeath Xone db2 and Yamaha AUDIOgram3.
The Audio is dropping often,i 've done every upgrade about Mac Os and firmware on my AH mixer,i,ve tried even to put an Usb2 Hub between my Mac and
AH,but nothing,the issue are goin on.
Please i 'd like to know why Apple does not solve this issue....
I must use my old mac when i play ad dj or performes ,actually with us2 my AllenHeat sounds great and i'm sure that the issue is about Mac's usb
Thanks Marco

Hey Marco,
This is a end-user-to-end-user support forum for the most part, I suggest you contact Apple via http://getsupport.apple.com or even http://www.apple.com/feedback to alert about your issue.
Good luck.

"F11 System Recovery" during boot does not work after Cloning hard drive.

Problem: “F11 System Recovery” during boot does not work after Cloning hard drive.
HP Envy m6-1125dx UEFI Notebook Computer with GPT hard drive.
Original Seagate Hard Disk GPT 700GB with Window 8.0_64 upgraded to Windows 8.1_64
Startup Menu (F11 System Menu works properly) only on original hard drive.
Following obtained from Disk Management & diskpart in Command Prompt.
GPT Disk <700GB>
Partition 1 WINRE NTFS Primary 235MB/400MB [Recovery]
Partition 2 EFI System FAT32 (LBA) Primary 108MB/260MB [System]
Partition 3 (NONE) Unformatted Primary 128MB/128MB [Reserve]
Partition 4 Main NTFS Primary 90GB/195GB [Primary “C”]
Partition 5 (NONE) NTFS Primary 372MB/450MB [Recovery]
Partition 6 Data NTFS Primary 7GB/475GB [Primary “E”]
Partition 7 NTFS Primary 26MB/350MB [Recovery]
Partition 8 Recovery NTFS Primary 24GB/26GB [Recovery “D”]
I have Cloned the original hard drive to a new HGST 1TB Hard Drive using four different methods (sector by sector):
Acronis True Image 2015
Acronis Backup for PC
AOMEI Backupper Professional
Macrium Reflect
Each time the cloning process completes successfully and has the same original partition arrangement. The computer works properly except when trying to use the “F11 System Menu” key during boot. It gives the following error message:
“Recovery
Your PC needs to be repaired
A required device isn’t connected or can’t be accessed.
Error code: 0xc0000225
You need to use the recovery tools on your installation media. If you don’t have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer. “
Any suggestions why the F11 System Recovery does not work during boot and how to fix the problem would be appreciated. I have does various disk checking and file checking on both the original and new hard drive with no errors.
Thank you in advanced.

Hi,
How did you clone the HDD ? One-for-one or different method ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

One USB port does not work with external Disk or USB key

Hello,
Back to my iMAC there is 3 USB port. The second one - in the middle - does not work pluging an external Disk, an USB key or an iPOD nano. However it works well connecting a Wacom tablet.
Is there an explanation to this behaviour ?
More the keyboard is plugded on USB port 1 and the mouse on the keyboard. Time to time - especially at reboot - I have to unplugged the mouse and plugged again it in order it works.
In advance thank you for your answers
Regards

Since it does not work for three different devices, I will assume it is not something simple like a faulty USB cable. Since it does work for one device, I will also assume that the port is (at least partially) working.
As a test to narrow down the cause, I would try restarting from your Mac OS X installation disc (insert disc and restart with the C key held down).
At the first Installer screen (after language selection), go up the menu bar. Under Utilities, select to run Disk Utility. Now, connect the USB drive into that center port. Does it appear in the Disk Utility sidebar?
Please post back the result...

Apple USB keyboard does not work with one internal usb port

Hi everyone,
hope someone can help me to solve my problem. I have a MPB13 retina late 2013 since something like 3 months. I have additional screen (dell), usb wired keyboard (apple) and BT magic mouse.
Since a few days, my usb keyboard does not work well. It only want to work properly when plugged to the rights side usb port internal port and not anymore on the left one. It also work on a usb external concentrator. Before, I had no problem, it worked perfectly. There was no problem such as cofee on it...
After searching the web on such problem, I tries a few things such as:
I tried the keyboard on another computer (windows): works fine
I tried usb stick and external DVD reading on the left internal usb ports: works fine
I switch the MPB off and turn it back on: the usb keyboard still does not work on the left usb port
I tried the SMC and PRAM reset : nothing
Any idea ??
Thanks
Guillaume

I'm facing the same problem, found any solutions ?

External USB HD does not work with HAL:

External USB HD does not work with HAL:
From the last 10 days the HAL auto-mount with ntfs-3g file system of my external hard drive does not woks.
But the manual mount procedure with the command mount -t ntfs-3g /dev/sdb* /mnt/XYZ works.
I've followed the instructions in the wiki: http://wiki.archlinux.org/index.php/HAL and the system has worked up to the last kernel or HAL update.
My fat32 usb-stick works without any problem.
If I try to open the device with KDE it appears an error popup wit this message:
TODO: have to rethink extra options
Error: kio_media_mount_helper
The log from the kernel.log is
Nov 6 22:03:16 myhost usb 5-1: new high speed USB device using ehci_hcd and address 4
Nov 6 22:03:16 myhost usb 5-1: configuration #1 chosen from 1 choice
Nov 6 22:03:17 myhost Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov 6 22:03:17 myhost ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 6 22:03:17 myhost Initializing USB Mass Storage driver...
Nov 6 22:03:17 myhost scsi6 : SCSI emulation for USB Mass Storage devices
Nov 6 22:03:17 myhost usb-storage: device found at 4
Nov 6 22:03:17 myhost usb-storage: waiting for device to settle before scanning
Nov 6 22:03:17 myhost usbcore: registered new interface driver usb-storage
Nov 6 22:03:17 myhost USB Mass Storage support registered.
Nov 6 22:03:22 myhost scsi 6:0:0:0: Direct-Access WDC WD32 00JB-00KFA0 0811 PQ: 0 ANSI: 0
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sdb: sdb1
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Attached SCSI disk
Nov 6 22:03:22 myhost sd 6:0:0:0: Attached scsi generic sg2 type 0
Nov 6 22:03:22 myhost usb-storage: device scan complete
and the error.log is
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Do you have some idea ....
Bye.

I have done the following:
Downloaded the patched hal version.
used makepkg in /abs/local/trunk/ to create a pkg for pacman
used sudo pacman -U pkgname to install it.
used sudo nano /etc/hal/fdi/policy/preferences.fdi to create the fdi file with the following content:
saved the file and removed my ntfs entryes from fstab and rebooted. and still there is no automount off ntfs partitions.
have i done something wrong?
br fjodork
WARNING: what follows is a guide of what did work for me, I'm still in an early stage of learning linux, so please correct me if anything of what follows is wrong/dangerous/stupid. As I said, this worked for me, it's not pretty, since I was learning each step on the fly and I'm sure there are better ways to do this.
So fjodork, you seem to have done the the necessary steps, though i couldn't get it to work until i first removed hal without dependencies
pacman -Rd hal
it will give you some warning about the dependencies, ignore it since we are reinstalling hal in a few steps.
First i tried to follow Raymano's link, obviously it showed me nothing in the browser so I thought it might be a broken link.
So I downloaded the source tarball from here http://hal.freedesktop.org/releases/hal-0.5.10.tar.gz
unpacked it changed the /tools/hal-storage-mount.c as per Milfadoodle's instructions.
at first I tried to compile directly from source, the process would finish without a glitch though after reboot nothing changed, as if hal weren't
installed, i guess there were issues with paths. anyway read on
Then repacked the source in tarball, copied it to /var/abs/extra/system/hal and modified the PKGBUILD as follows
makedepends=('pkgconfig' 'gperf')
options=('!libtool')
install=hal.install
source=(${pkgname}-${pkgver}.tar.gz #removed url so makepkg looks in the current directory for the tarball
hal
hal-policy.patch
cryptsetup_location.patch
hal-0.5.9-hide-diagnostic.patch
ntfs3g-valid-options.patch)
md5sums=('6641c30a27c00485c6accac5110ff911' # replace with md5sum of your package's sourceball (run md5sum filename)
'882f67668cb14a0a9e4a27ef22278027'
'5ba8b610aa9763a5f42b9f7cbd7a86ad'
then makepkg (i had to add --asroot, don't ask why
and finally pacman -U hal-0.5.10-1-i686.pkg
another reboot and everything worked without a glitch!:D (yeah i know i still haven't got rid of the reboot mentality )
I have also put the policy files as per the wiki instructions.
PS: I know this is a dirty way to getting things done but as i said, I'm just starting
If anyone could comment/correct/explain this post I'd be more than happy, the automount issue was bothering me for about a month now (you'll say why do I need ntfs in the first place? well, I only recently switched for Linux as my primary OS, these are some relics of the M$ era

External USB keyboard does not work with T60 after BIOS upgrade

External USB keyboard does not work properly with T60 after 2.26-1.07 BIOS upgrade.
It does the same with or without the docking station.
Anyone else bumped into this problem yet?
Has someone found any fixes for this?
t

Hi and welcome the forum!
Try uninstalling all USB hub devices from the device manager and reinstalling them again, particularly the keyboard's.
v2.26 is supposed to fix the issue according to lenovo:- http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-63024
Hope it helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

USB hub does not work! Help

I was attempting to install a KVM switch for my G4 and G5 that required me attaching my keyboard and mouse to the usb port on the back of the monitor.
The USB hub does not work! Monitor cable has no bent pins, and works perfectly for video with all my Mac's, G4's, G5's. The problem is I have had this monitor awhile and never tried these ports so apple won't help.
Anyone have any suggestions why these ports don't work and if there is a fix?
Can any one recommend a KVM switch that supports ADC, and USB so I bypass this hub.
Thanks

Some USB 2.0 hardware works very well w/USB 3.0 & some don't. Suggest that you contact the sound card manufacturer & ask them. Perhaps they can recommend a work-a-round.
Another user posted about the same problem some weeks ago regarding a sound card.

USB ports does not work

Hi I have problems with not working USB ports. It used to work. I downloaded actual drivers at msi.com for my gaming notebook GX 60 Destroyer and now my USB ports does not work. What should I do?

What driver have you updated?
Try to do an EC firmware reset by removing the battery and the AC adapter then put the battery back with AC adapter attached.
Same questions like Pegasus asked, does all ports not working? which one exactly? What OS are you using?
Have you done any changes to the system? (for example: self-install OS or changing OS)

USB-Audio does not work correct on T430/T530

Hi all!
I'm owner of a T430 and a T530. Both are new PCs where I have installed Windows XP. The reason for XP is that I own older software and hardware, which is not supported on Windows 7. But it works fine and I have no reason to change hard- and software as long it fulfills my requirements! And Windows XP runs fine and fast on the T430 and T530.
Only problem is an EgoSys USB Audio interdace U2A. It is possible to install and run it, but there is a problem in the communication between operating panel and the hardware. When I move the slider for the level, the level jumps instead a smooth increase of the level, which means not alle values of the slider are transferred to the hardware. There is a similar behaviour with checkboxes: there are states of the U2A which are indicaed with LEDs. When I change the checkbox, sometimes the LED changes, sometimes not. This errors happen very frequently but not reproducable.
I tried several settings in the BIOS, like disabling one CPU, hyperthreading, USB3 etc. I tried the U2a also on a fresh XP-intallation without other software, but all without success, the behaviour of the U2A is always the same!
I also tested with an ExpressCard with USB-port from LogiLink, but this card does not recognize the U2A at all.
Up to now I have used the U2A on many different PCs without problems. What might be the reason that it does not work on an ThinkPad? Up to now I was very satified with the U2A and I would not like to replace it!
regards
GKap

Hello faith67baillie,
Welcome to the HP Forums!
I understand there is no sound from CDs or your Music folder. I will do my best to help! First, I require the following information, and clarification of the issue:
1. The computer's model number. If you require assistance locating this information, please reference this website: Guide to finding your product number
2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
Additionally, if the issue just began occurring, I would perform a system restore. I want you to bring the computer back to the earliest restore point possible, in an attempt to dodge whatever caused the issue. Here is a document on how to perform a System Restore: System Restore
Mario
I worked on behalf of HP.

My usb port does not work on all user accounts

My usb port does not power my iPhone or Apple keyboard on my main account, but if I switch users it begins to work
Spring 2011 macbook air with the latest OSX as of Jan 2012.
Thoughts
THANKS
Stan

Try Resetting the System Management Controller (SMC)

945gcm5 usb 2 does not work

Hello
I also have the same problem and did the same things that are mentioned here in another post, with no success.
I laso have the latest bios update and all the drivers are up to date.
It simply does not recognize USB2.0...
Any sugestions?

hiii
the exacts symptoms is that, does not work the USB2.0. And inte device manager it only appears:
"Controlador Amnfitrião Intel(R) 82801G (ICH7 Family) USB Universal 27C8
27C9
27CA
27CB
I've tried so many OS's, Win XP SP3; Windows Vista; Seven (several versions) Linux Ubuntu, and the same thing:
"this device could be faster" but there are any ports....."
Sugestion, buy another board?

Apple USB keyboard does not work

I have the same problem as described by Sweboss on November 15th, 2012. The Apple USB keyboard is working perfectly, but if I shut down the computer, when I switch it on again, the USB keyboard does not respond, and the computer is looking for a Bluetooth keyboard (which I had before). I have tried switching off, unplugging all peripherals, then unplugging the computer, waiting 15 seconds, then plug it in, wait 5 seconds (this is a remedy proposed in other mails). Switch on and the USB keyboard does not respond. It is not that particular USB port, as it works perfectly well with other peripherals like my scanner, or printer, and changing ports does not help. And when I tried it last time, I had no other USB peripherals connected. Can anyone help?

That is definitely some strange behavior, good to finally be working, but does not explain exactly what causes the behavior. Could have something to do with the energy saver part of the operating system, or a miscommunication with the USB bus itself. With multiple USB ports it would be good to test on different ports to see if that is an issue. Anyway, it is working now and that is good.
Another I don't know why but it works: a couple months ago a user was having problems with a wireless keyboard. The keyboard-iMac communication resulted in random charaters, time lag, and other bad behavior. The user finally found by accident that turning the keyboard off, removing the batteries, and then spending about five minutes just pressing keys, placing the palm of the hand on the keyboard and pressing, just pressing and pressing, and then replacing the batteries and turning on the keyboard, it worked fine. Seems like it is necessary to just force the keyboard to discharge all of the key switches. Those keyboards use capacitance switches instead of mechanical switches. So they retain a charge.
While that was a wireless keyboard, I wonder if that was what happened in a way with your keyboard...the unplugging and leaving it for a period of time, any charge may have dissipated and it would work again. If this happens again, try the above procedure and see if it helps.

Bluetooth USB Dongle does not work

I have this generic looking USB dongle (forgot the brand) that I use with my eMachines e725 laptop. It worked fine with Linux Mint 9 KDE 64bit that I had to use for the past 1.5 years. The moment I plugged the dongle in, it was instantly detected and the bluetooth icon turned active in the system tray. However it does not work with my ArchLinux 64bit install with KDE4.6 (updated to latest packages). Due to issues with the new Kernel 2.6.39 series, I am using the LTS kernel.
lsusb:
Bus 003 Device 009: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
tail -f /var/log/messages.log
Jul 10 17:56:26 localhost kernel: [11565.480026] usb 3-1: new full speed USB device using uhci_hcd and address 9
Jul 10 17:56:26 localhost kernel: [11565.728190] usb 3-1: configuration #1 chosen from 1 choice
I've installed bluez and bluedevil. In KDE System Settings, when I go to the bluetooth options, it says no bluetooth adapters have been found.
Last edited by MetalheadGautham (2011-07-10 13:28:51)

Have you read the Bluetooth wiki page?
Seems to me you didn't run the relevant daemon.
Also, your thread title should include 'bluetooth' - 'USB dongle' on its own is too generic.
Last edited by tomk (2011-07-10 13:12:28)

USB Boot does not work on factory fresh device

Similar Messages

Maybe you are looking for