Usb broadband device to ipad 2 connection

What accessory do I need to buy to connect a usb broadband device to ipad 2?

You cannot connect a broadband adapter to an iPad via USB. WiFi is the only method for connecting a non-3G iPad to a network (other than tethering to an iPhone, which can also be done via Bluetooth).
Regards.

Similar Messages

  • Hi All, I have the latest version of iTunes, however since upgrading I can no longer get iTunes to recognise that any devices (iPhone / iPad) are connected? Can anyone help please. Paul

    Hi All, I have the latest version of iTunes, however since upgrading I can no longer get iTunes to recognise that any devices (iPhone / iPad) are connected? Can anyone help please. Paul

    Try holding down CTRL as you launch iTunes to see if it will repair the drivers.
    Or try Cerbu's post here.
    Or see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, forcing a driver update.
    Please let us know which approach works for you...
    tt2

  • Charge USB host device through SB E5 connection?

    Purchased a Sound Blaster E5 a few days ago and love it so far. One of the ways that I use it is while sitting at my desk, connected to my iPhone or iPod Touch. I can keep the SB charged up and ready to go by connecting the microUSB cable to a charger. However, because my iDevice is connected to the Sound Blaster, the battery winds up discharging while using it.
    Is there any way to pass the external power through to the device connected to the Host port? I don't necessarily want my phone to charge off the E5's internal battery, but is sure would be convenient if it would allow charging through when connected to an external power source.

    I have had the same problem with my Dell Inspiron 8600 and the Sound Blaster MP3+ for the past year, with or without SP2, it gives me the power surge error whenever I plug it in. It works fine on my desktop. Is there anything I can do? I bought this about a year ago and it recently resurfaced and I decided to try it again with no luck...

  • Can I use a Telstra USB broadband device with my Macbook Air OS 10.7.4?

    Any advice about USB use with my Mac? I don't have regular access to WiFi. Thanks.

    Fixed from earlier thread.

  • Can I use a Vodafone USB Dongle with my apple IPad 1st Generation if I have a USB adaptor for my IPad

    Hi there just wondering does anyone know if I can use a Vodafone USB Dongle with my apple IPad 1st Generation 16gb (WiFi only) if I have a USB adaptor, will the IPad !st generation support a A Vodafone Dongle(Irish network)

    You cannot plug a USB dongle into an iPad using the USB part of the iPad Camera Connection Kit.
    The Camera Connection Kit is for connecting cameras - hence the name.
    You'd need to get a MiFi device to use 3G data via WiFo on your iPad.

  • I don't have a wireless printer, and want to print things off of my iPad.  I know that I can use the iPad Camera Connection kit to connect USB devices like keyboards and I am wondering if I could do the same with a USB printer.

    I don't have a wireless printer, and want to print things off of my iPad.  I know that I can use the iPad Camera Connection kit to connect USB devices like keyboards and I am wondering if I could do the same with a USB printer.

    I don't think you can connect a printer since you won't have the printer drivers. I use FingerPrint from collobos.com to print to my non-AirPrint printers.

  • Since upgrading to Mavericks, I have been unable to sync devices (specifically ipad mini and iphone 4s) to my MId 2013 Imac . They wil rapidly connect and disconnect, and I'm unable to do anything with the device. This happens with both USB ports.  Any su

    Since upgrading to Mavericks, I have been unable to sync devices (specifically ipad mini and iphone 4s) to my MId 2013 Imac . They wil rapidly connect and disconnect, and I'm unable to do anything with the device. This happens with both USB ports.  Any suggestions?
    MacBook Air, OS X Mountain Lion (10.9.1)

    Obviously, syncing an iOS device with iTunes over USB is still supported in Mavericks. Calendar and contact syncing with iTunes is no longer supported. That has nothing to do with your problem.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Connect USB devices to iPad

    Is it possible to connect USB devices, such as an Extn Harddrive, using an adapter or such?: Thanks, Greg

    You can use the iPad Camera Connection Kit to connect a camera or sdcard, but connecting a hard drive is not supported at the moment.  You can take a look at the Seagate Satellite hard dirve you can connect via Wi-Fi
    http://www.seagate.com/www/en-us/products/external/external-hard-drive/goflex-sa tellite/?cmpid=ppc-_-satellite-_-g-_-us-_-seagate_satellite-_-e&gclid=CNjaltnkxK 0CFRRZhwodUB5NAw

  • Connect Mobile Broadband device to Airport Extreme?

    Hi,
    I'm thinking about changing broadband service providers.  I'm considering getting a mobile broadband device from either Virgin mobile or Netzero.  Both of these devices will allow me to connect up to 5 devices but when I start thinking about computers, phones, printers, iPad...we have more than 5 devices in the house that would want to connect to the wireless network.  I am corrently using an airport extreme (which I love).  Does anyone know if it's possible to connect one of these mobile broadband devices to the airport for a larger network?  If so, how?
    Thanks in advance,

    Hello,
    I guess that it would be correct to assume that you have looked at hotspot devices (small access points or routers with Wi-Fi capabilities). The following discussion concerned a similar problem, where Bob Timmons suggested to use Ethernet between routers. Unfortunately, a hotspot may not have an Ethernet (LAN) port at all.
    https://discussions.apple.com/thread/4033477
    One solution could possibly be a slightly different approach. There are several dedicated mobile broadband routers available (from Dovado, Netgear, Cradlepoint, and others). These typically accept a USB mobile broadband modem (check that the router has support for the exact model and the phone network in question). These routers do usually have at least one LAN port (which may allow a wired connection to another router, if merely the Wi-Fi capacity would not be adequate).
    Jan

  • Can i use a connection cable to watch movies saved on my usb stick on my ipad mini as i have run out of storage space

    Hi all, i am going on holiday soon and want to watch all the movie from itunes however my ipad is only 16gb and cannot hold all the videos, any advice on how i could watch the films on my ipad my connecting it too my ipod touch (32GB) or iphone (32gb) or a usb stick so i can hold the extra movies on another device.
    thanks for any advice.

    There are some wireless external hard drives that can be used with the iPad.
    Best iPad External Hard Drive Storage Options
    http://www.unlocktips.com/2012/11/best-ipad-mini-external-hard-drive-memory-stor age-options/
    iPad Storage Solutions
    http://www.ipadstoragesolutions.com/iPadWirelessStorage.php
    SanDisk Connect Wireless Media Drive http://www.sandisk.com/products/wireless/media-drive/
    Another option:
    Expand your iPad's storage capacity with HyperDrive
    http://www.macworld.com/article/1153935/hyperdrive.html
    On the road with a camera, an iPad, and a Hyperdrive
    http://www.macworld.com/article/1160231/ipadhyperdrive.html
     Cheers, Tom

  • I am trying to load photos from my computer on to my ipad but keep getting the message "the device is no longer connected to the computer. It keeps popping up and I am stuck. This happened after I upgraded to the latest itunes

    I am trying to load photos from my computer on to my ipad but keep getting the message "the device is no longer connected to the computer". It keeps popping up and I am stuck. This happened after I upgraded to the latest itunes software.

    Greetings cdewinkel,
    It seems your iPad is not staying connected to your computer during syncing. The following article provides a number of troubleshooting steps which may help. This article is intended for devices which are not being detected, but the troubleshooting steps are relevant to your issue:
    If you don't see your connected device in iTunes for Mac - Apple Support
    Make sure that your device is on
    Also make sure that you can get to the Home screen.
    Get help if you have one of these issues:
    Your iOS device won't respond or turn on.
    Your iPod won't turn on.
    You forgot your passcode or your device is disabled.
    Make sure that your Mac supports your device
    See the system requirements for iPhone, iPad, or iPod.Check your USB connections
    Unplug other USB devices from your Mac and try again.
    Try a different USB port.
    Try a different USB cable. 
    Learn more about using USB cables with your Mac.Make sure that your device trusts the computer
    You might get an alert if you haven't connected your iOS device to this computer before. Unlock your device and tap Trust. 
    Learn more about the Trust This Computer alert.Restart your device
    Restart your iOS device or reset your iPod.Restart your Mac
    Turn your Mac off and back on.Update your software
    Check for software updates on your Mac.
    Check for an iTunes update.
    Check your security software
    If you have security software installed, learn how to resolve issues between iTunes and your security software. 
    Get more help
    If you still don't see your device in iTunes, contact Apple Support.
    Thank you for contributing to Apple Support Communities.
    Best,
    Bobby_D

  • My iPad won't restore I've connected it to my mac, it goes thru the whole process of restoring and at the last bit my laptop tell me my device is no longer connected n on my iPad the apple sign comes up but the line doesn't load

    please help ive tryed everything and i cant get my ipad to restore, ive discontecting it, defult starting it and no matter what my laptop keeps telling me that "this device is no longer connected " and on my ipad the apple logo comes up but the bar does not load please help !!!! i need my ipad for lectures

    Hi rhiess,
    Thanks for visiting Apple Support Communities.
    It sounds like your iPad may not have restored fully. I'd recommend restoring it again with the iPad in recovery mode.
    Use the steps in this article to place your iPad in recovery mode:
    iOS: Unable to update or restore
    http://support.apple.com/kb/ht1808
    After placing your iPad in recovery mode, use the steps in this article to troubleshoot the connection between it and your computer:
    iOS: Troubleshooting USB connection
    http://support.apple.com/kb/TS1286
    If you still don't see your device in iTunes, follow these steps for Mac or these for Windows.
    Best Regards,
    Jeremy

  • Connecting USB cable to new iPad

    Is there a way of connecting a USB cable to my new iPad? I have a device that I want to connect to it but it is only supplied with a USB cable.

    I don't find this question too clear, but I'll try to answer anyway.
    " ... my new iPad?"  I wonder if that means the latest model iPad, commonly called the iPad 4.  If so, it has a lightning port on the bottom.
    " ... but it is only supplied with a USB cable."  What does "it" refer to ... is it the device you're trying to connect to, or is it the iPad?
    Anyway, your iPad comes with a cable that goes from its bottom port (presumably the lightning port, but maybe a 30 pin port if you're really talking about an older model) to USB.
    So the bottom line is you have a cable with your iPad that connects to USB.  The cable came with your iPad.

  • Can you connect a mobile broadband device to a time capsule?

    Can you connect a mobile broadband device to a time capsule?

    Only if it has ethernet.. and offers the ip direct to the device ie you need a 3G router not a USB stick..

  • Can a Mac Update disable a USB mobile broadband device?

    Hi all,
    Last night, my Clear internet went down on me, both home WiFi modem and plug-in USB mobile broaband device. One minute I was on the net and the next, not.   After wasting 2 hours with Clear customer service, I gave up and started Googling and found some lovely folks here on Apple Support communities that suggested uninstalling Intego Virus Barrier X6.  Well that worked to get my home WiFie modem up and running.  But my MacBookPro (10.5.8) doesn't still see the USB device plugged in. It's not my USB port, as other devices work fine plugged into the same port.  
    I called Clear customer service back and they suggested that there is some phantom Mac Update that has disabled my USB device.  I know they're bs-ing me.  I think the device is broken.   But I thought I"d see if any other Mac people have had a problems with a mobile Broadband device in connection with either Virus Barrier or Mac updates?  I've googled lots of search terms and can find no one else with this complaint

    No.
    It is possible for the Mac (or another computer) to update the firmware of a device, but you would know if you did that. Likewise it is possible for the Mac to be unable to detect the device through its own fault - such as the Mac's USB ports or wifi failing. But the Mac's updates are only for the Apple hardware and software. Also, updates take effect immediately. Were you installing an update when your connection went down?
    I think their tech support people are trying to get you off the line. If such a thing happened people would be reporting it all over the place, not just here. Ask them to point you to some reports. Ask which update did it.
    Best of luck.

Maybe you are looking for

  • Creating an image from a panel

    Hi everybody, I have a panel which extends JPanel, and wrote an image() method to extract the drawn image off the panel. For some reason, though, when I call this method, I get a dialog with a black box centered in it, and not the appropriate image.

  • Problem using swf loader

    When i try to run the mxml individually, It run correctly. As soon as i include it in another mxml using SWFLoader , the components stop working properly. It reflects the data sometime while sometime it doesnt. If i press browser refresh button , the

  • TA38482 an unknown error occured (-42110)

    I get this every time itunes starts.  Help me please

  • Query or Workbook or Web Template-Process chain

    Hai Friends,                I want to broadcast reports.Which type of the report is more attractive among Query or Workbook or Web Template?Suppose if we select Workbook as type,will it support for process chain which will create to automate the broa

  • No Previews Show On Catalog Import to LR4

    I need some help.  I've just imported my catalog from version 3.  No problem with the import, all the collections etc came in just fine with all the right number of photos, organization etc.  However there are no previews. Not one!  I have just had m