USB cable CA-53 is not working for nokia 7250i to ...

I am trying to connect nokia 7250i with CA-53 cable to take back up
but it displaying error msg with exclamentory mark like
USB devive not recognized
one of the usb devices attached to this computer has malfuntioned , and windows does not recognize it ,
Please help me to resolve this so that I can take back up

I have exactly the same problem trying to connect my N73 phone to my PC with a CA-53 cable supplied with the phone.
I have uninstalled and re-installed the current version of PC Suite complete with drivers from the Nokia support site, rebooted the PC and the phone, returned to the original pghone settings - all to no avail, still getting the same mesage about a USB device malfucntioning, Windows does not recognise. Nopkia support suggested disabling firewalls (Windows, Nortons antivirus) - again no difference. So now they think it is the cable. I have purchased a new CA-53 cable on ebay for $A5.65. It should arrive tomorrow. I hope that fixes the problem.

Similar Messages

AT commands not working for nokia E63 (Must Reply)

Hi
I am trying to read SMS from my Nokia E63 via hypertermianal program and my phone is connected through Bluetooth.
When I send sms , it works perfect but on receiving sms I am getting error on
at+cpms="sm"
ERROR
at+cpms=?
+CPMS: (),(),()
at+cpms=?+CPMS: (),(),()
at+cgml="REC READ"
Please guide ? if my phone does not support AT commands for receiving sms then any other method system for this so I may get / receive sms.
Or please let me know which phone support above commands or at commands to get sms.
its urgent , pls reply

jhlnl wrote:
I got the nokia x6 phone recently and have been putting music it on it through my USB cable that came with it, through mass storage. Up until recently it has been working fine, but last week when I tried to delete the all the music off my phone through the mass storage usb cable on my mac, the computer tried to delete all the files, but in the end the cable was ripped out the computer in frustration as it just took too long to even begin. (3 hours and it didnt even start deleting, just said it was 'preparing to send to trash.'
Now my music is all corrupted on my phone, and each time I try and play it it come up with 'general error' and marks the music as corrupted. None of it works, and now it wont even allow me onto the music. The problem is that it is taking up all my room and each time I try to do anything it says there is no more room available.
The bigger problem is now with the usb, which each time I plug it into the computer the file does not appear, but if i take it out the computer always says it was taken out without ejecting, which shows it is at least reading it, it just isnt showing up. I have tried to download new update, and even to manually delete all my music, which doesnt work as it says 'general error' each time I try to do this.
Sorry about the long speech here, but I hate gadgets at the best of times and now that its ruining my phone!! I have also tried a factory reset but that does nothing either. Thanks
Since all data is corrupted I advise to reset your device. I hope you didn't destroy the USB connector.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Lock code not working for Nokia 5700

i tried formatting my phone today and when they asked the lock code i tried entering 12345 which is the default one, but it is not working.
when i go to change the lock code and when i enter 12345 there they are accepting it and asking me to enter new lock but when i enter the new one and confirm it they are saying as "code error ".
can anyone help me to reset my lock code or fix this problem somehow.
and i am also facing the problem of messages going to outbox saying "you have to delete some data 1st and memory is full " . But there is lot of space left in my phone memory and memory card . tried usign both but still facing the same problem .

Sometimes networks change the lock code but if this is the case the code should be printed on the label on the box.
If you changed the lock code and can't remembr it, you can have it reset at any Nokia Care Point. You may be asked for proof of purchase so bring it with you.
On a few models a software update or deep reset will reset the lock code. You could try this to see if it works on your phone. You need to backup your phone before doing so.
You can find your nearest Nokia Care Point at:
For UK
http://www.nokia.co.uk/A4228006
For Europe:
http://europe.nokia.com/A4388379
For Asia-Pacific
http://www.nokia-asia.com/A4416070
Elsewhere:
http://www.nokia.com select your country, go to the support section, then select repair.

Lightning USB cable (new) is already not working

Can I get it replaced if I have AppleCare?

You don't need AppleCare to get a cable replaced, especially if it's new. Take it back to the Apple Store and it will be replaced under the 12 month limited warranty.

Even genuine iphone 5 usb charging cable does not work for an year?

I have bought an iphone 5 last year. With it, came the original apple genuine iphone 5 lightning USB cable. It did not last for half year. I had to buy another original apple iphone 5 similar cable and it was gone within 3 months. I dont understand is it cable manufacturing problem? is apply selling fake cables? It is really annoying and I am really angry that such a reputed company cant give/ provide proper long lasting cables.
My experience with these two genuine cables was that after some months of usage, i used to observe even if its plugged it would not charge, or if you push it hard its charging. Firstly, I never keep my phone charging all time. Then how the hack can the charging cable die? or problem arise. I bought the phone and the charging cables when I was germany. I had to buy a 20 euro local companys USB charging cable after above two stopped working with no signs of damage. I have also tried cleaning the charging jack or socket where cable is inserted. It did not help. This local charging cable started to torn out automatically and it got fully damaged, Now I am in India, I bought another cable of 10 euros and it is just two days, it would not charge again.
I am really furious now whether you use original or local USB cables they dont last for even a week? what the ****?
Do I need to really pay for those portable charger with a big price tag, that my problem will be solved? very very upset. I never have any complaint with the phone, but the charging catastrophies, really ****** me off. I think of going back to other mobile brands like samsung or nokia where there is never a charging issue or battery drainage issue once you charge its goes for days or it is also expensive buy a nokia or samsung charger if lose it or break it. but for iphones its really bugging situation and not just me many people around the world are having sick problem with iphone brand with charging ISSUES.
APPLE PLEASE SORT THE PROBLEM OR SELL the PORTABLE IPHONE CHARGERS (WIRELESS) CHEAPER so that we dont have to use these silly little lightning cables. or I fear my APPLE I PHONE 5 is not genuine or its FAKE.
PLEASE HELP>

Look closely at the way you handle the cables. I have never had any cable, Apple or third-party, fail on me.

I have an older iMac 5,1 and the disc drive no longer works. I was hoping that I could the Apple USB super drive as a replacement, but the info on the super drive page says compatible with iMac 2012 or later. Does anyone know why it would not work for me?

I have an older iMac 5,1 and the disc drive no longer works. I was hoping that I could the Apple USB super drive as a replacement, but the info on the super drive page says compatible with iMac 2012 or later. Does anyone know why it would not work for me?

A reply to similar question (Q & As , in product page Apple Store) says:
"...dissable the internal reader hardware from devices setup. Then plug the external usb superdrive and that's it." Answered by Enrique T from Lima Oct 25 2013.
If you can locate an external Apple USB 'Air" superdrive for earlier model MacBook Air, that should work. The newer one for the Air is the same as for iMac, now.
You may be able to use other brands of external USB optical drive with your older intel-based iMac, as some of them function capably. A few should also be able to see system discs or other bootable utilities on DVD.
Hopefully this helps.
Good luck & happy computing!

USB not working for data

Hi, I just realized one of the USB ports of the laptop (powerbook G4) is not working for data transmition, it only works for power, like a cooler.
Does anybody has any idea?

USB and FireWire Quick Assist
http://support.apple.com/kb/HT1151?viewlocale=en_US
Common fixes for USB device issues (unrecognized, etc.)
http://www.macfixit.com/article.php?story=20070824012114701
 Cheers, Tom

USB port Working for my Wireless mouse but not working for another Devices like Flash Memory ?, USB port Working for my Wireless mouse but not working for another Devices like Flash Memory ?

USB port Working for my Wireless mouse but not working for another Devices like Flash Memory ? Anyone can help me plz?

Hi, is this a question" Post?
or are you just offering an insight into your Mouse Issue?
Generally and at times we all have little idiosyncrasies appearing with the running of our Macs.
I use the same Logitech BT with my MBP. MB & iBook..(not at the same time) Only ever had one issue
and the cure was to completely Delete the mouse from BT -> Repair Permissions & Reboot then Re Install the BT mouse..Ihave just put a new set of batteries in the Logitech (only 2nd set ever)...L

Continuity not working for iWork from iPhone to Mac

Continuity not working for iWork. When I open numbers on my mac it can be continued to iPhone, however if I open numbers on iPhone the extended dock for numbers is not showing on mac please help!
Iphone 5s iOS 8.0.2
MacBook Air on Yosemite

If you mean photo stream, that's because they only remain in iCloud for 30 days (even though your last 1000 photo stream photos remain on your iOS devices until you delete them). When you first enable photo stream, you only get the photos from the last 39 days as older photos are no longer in iCloud.
If you want to stream your old photo stream photos to iPhoto, add them to a shared photo stream on your phone and invite yourself as a subscriber, as explained here: http://help.apple.com/icloud/#/mmc0cd7e99. Alternatively, you can import them using your usb cable as explained here: http://support.apple.com/kb/HT4083.

Fingerprint utility is not working for normal users - Tecra M11

Hi All,
I installed windows 7 pro in Tecra M11 laptop and the Toshiba finger print utility is not working for normal users.
It is working only for domain administrators. The TFPU is not working for, normal domain users, local users, local administrators. If we run the utility it will ask to enter the windows password and once we applied the password then the message saying "entered password is not valid" will prompt even if we are trying to use the utility first time.
If we try with a domain admin account it will work without any problem. Can somebody help me to trouble shoot this issue?
Thanks.

People nowadays experienced that no matter How many times we glide our finger it have no response.In this instance, you might be very afraid of Windows password lost by reason that there is a plenty of important data on your PC.
Then what should you do? One choose is fix the Fingerprint scanners, but this method will cost a lot of money. The other is use the Windows password function to solve the problem. Certainly, this is a very safer, faster and easier to use method for you.
According my personal experience, you can try these three ways to re-access to your PC:
Method 1: Login with the default administrator account
* Step 1: Start Windows PC
* Step 2: When you can see the Windows login screen, press ctrl+alt+del keys Twice and it'll show Classic Login box
* Step 3: Type Administrator as Username and leave the password field blank
* Step 4: Press the Enter Key and then you can be able to login the default windows administrator account which is it created by default when install windows.
*Note:* This trick is only work for Windows XP. And when you input the key combination Please don't put the cursor on any account. And if you change the name or password before, you cannot login by this way.
Method 2: Use the previous password reset disk
This method describes how to create and use a password reset disk for a computer that is a member of a domain. You can use a Windows password reset disk to gain access to your Microsoft Windows Professional-based computer if you forget your Windows password. Please click here to learn more.
Method 3: Using Windows Password Unlocker
Using Windows password remove software is could be the fastest and easiest way for you to reset your Windows password while you didn't create a password reset disk before.
There are 2 options for you: recover Windows password with a bootable CD/DVD or recover Windows password with a USB flash drive.
Before starting, a bootable CD/DVD or USB flash drive and a computer with CD drive are required. (Internal CD drive and external CD drive are both OK.
Option 1: Recover Windows password by burning a bootable CD/DVD
Option 2: Recover Windows password by burning a USB flash drive
The whole Windows password recovery process can be divided to 3 big steps:
* >> Step 1: Burn a USB flash drive to remove lost Windows password
* >> Step 2: Set your target computer to boot from USB
* >> Step 3: Recover forgotten Windows password with the burned USB flash drive
In fact, all you need is a *Windows Password Unlocker www.passwordunlocker.com/windows-password-recovery.html which can help you directly reset your windows xp password, and then you can login your XP without a password required. Of course, there are also some other ways to do it, but this way may be most convenient one.

Windows reports that the "USB-IF xHCI USB Host Controller" device is not working properly.

I have been receiving the following error and instructions to fix it for a long time now, prior to updating to Windows 8.1:
A device is not working properly
Windows reports that the "USB-IF xHCI USB Host Controller" device is not working properly.
Recommended solution to the problemUse Windows Update to check whether new device drivers are available. Proceed as follows:
Open Device Manager
Search in the device manager for the device whose driver you would like to update and double-click on the device name. You may first have to enable the "Show hidden devices" entry in the "View" menu.
Switch to the Driver tab, click Update driver and follow the instructions
When I follow the instructions and try to update the driver, I am told "The best driver software for your device is already installed."
How do I update the driver to stop receiving the error?
This question was solved.
View Solution.

I have solved the initial problem.
I found the solution on the Forum at http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03926756&tmp_task=solveCategory&cc=us&dlc=en&la...

Mac 10.5.8 just bought usb cable and still won't work.

I bought HP Envy. Got home and learned I needed to buy new software. Dissapointed did not come with USB cable. Bought cable. Still is not working. It asks which driver and Envy 5530 is not available. But there are lots of other drivers. Is there another that will work?

The printer requires 10.6 Snow Leopard.
You can return it and try to find a printer that is supported on your 10.5.8 Mac.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

My webcam is not working for skype and other appli...

Hello,
My webcam is not working for skype and other applications i have used tinychat and tango..i have updated all version of skype as you said in other topics but all of them is not working for me...my device name is vimicro usb 2.0 and i have accidently deleted that device now i have installed that device again but its not working i have seen all topics please help me ...
i will be very thankful to you

Please, run the DirectX diagnostics tool.
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.

Till my last software update on my MacBook Air I have been able to use my iPhone as a modem via USB. Now it's not working anymore. Other functions via USB are still fine. Any ideas???

Till my last software update on my MacBook Air I have been able to use my iPhone as a modem via USB. Now it's not working anymore. Other functions via USB are still fine. Any ideas???

The Mac was recently upgraded so it is the Mac, or is it?
Looking for a common denominator: I'l start with wi-fi as the common communication medium.
Known:
A) Broken: iPhone —> wi-fi —> Mac.
B) Broken: iPhone —>USB—> Mac.
C) Broken: iPhone —> Bluetooth —> Mac.
D) Working: Mac —> USB —> other USB devices.
Unknowns:
E) Test Mac —> wi-fi —> a non-iPhone router.
F) Test iPhone —> wi-fi —> another wi-fi device.
Given not A, not B and not C either the Mac or the iPhone could be the culprit.
1) E        | F        : Non sequitur (deepens the mystery).
2) not E | F        : The Mac is the common denominator.
3) E        | not F : The iPhone is the common denominator.
4) not E | not F : All heck broke loose.
For case 1: It would be something on the Mac that prevents it talking to the iPhone through three media even though it can talk to other routers over wi-fi. That would be weird indeed, given the iPhone is talking to other wi-fi devices with no trouble.
For case 2: All of the Mac’s intranet media broken (wi-fi, Bluetooth, and wired-USB) and at least wi-fi works on the iPhone. Something weird is going on in the Mac.
For case 3: The iPhone router function is broken. Upgrade the iOS? Test using another iPhone?
For case 4: Throw everything in the trash and start over.

I downloaded the pokemon yellow version app for my ipod touch more than a month ago and it is still not working. It has not worked for anybody who bought it. How can I get my money back?

I downloaded the pokemon yellow version app for my ipod touch more than a month ago and it is still not working. It has not worked for anybody who bought it. Why is it off of the app store now and how do I get my money back?

That message is usually due to a bad cable.
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
If you can’t charge your iPhone, iPad, or iPod touch
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
or send it in to Apple. See:
Service Answer Center - iPod

USB cable CA-53 is not working for nokia 7250i to ...

Similar Messages

Maybe you are looking for