USB Cable issue

Hia ll
I just bought the Mark Space software to sync my TX with my MBP, and my first sync worked wonderfgully via bluetooth. However, I have a wireless mighty mouse, and I had issues with them both (its not possible to use both items at the same time).
So I recovered from a lost drawer the USB cable which came with the Palm TX and have tried many times to connect, tried all the USB ports, tried the suggestions on the MarkSpace page, using Profiler and refreshing, etc. No Go. Is it possibel that the cable is damaged? It makes a bleep noise when I connect.... but it cant seem to connect. Ive triple checked the preferences on the coneection type on the TX, did a soft reset, etc.
Thanks
J

The secret to synchronized mail is IMAP. Seriously. It is literally impossible to 'synchronize' mail using POP3 clients. It can be done, sort of, in a kind of a hacked, sloppy workaround, but conversion to IMAP is the key.
Not all providers allow for IMAP accounts. There is an Exchange IMAP option, it's available with .Mac and AOL or AIM Mail accounts, but not with Gmail or Hotmail, for example. Many commercial ISPs provide for it, but some major players like Comcast do not. Mac OS X Server uses Cyrus to provide both IMAP and POP3, so if you are running your own mail server in house using OS X Server or a comparable product, then it's a given that you can use it.
Unlike POP3, IMAP stores your messages on the server where all IMAP clients can essentially 'view' them through what is essentially a window into your server provided by each client. You can selectively copy these messages to a folder on your Macintosh in Mail, for example, and use any client to copy, move or delete messages. It's far more powerful and flexible than POP3, and you'll wonder why you every used that technology once you've moved to IMAP. I see the same view no matter which of several IMAP clients I use, on any of my IMAP accounts. Versamail now supports IMAP, though many Palm users opt for SnapperMail from SnapperFish, instead.
The Missing Sync for Palm OS allows some control over where data is stored on your device, but most decisions are made for you by either the Palm OS or a Missing Sync conduit. Photos, for example, move between iPhoto and and available built-in storage on your handheld, or on a supported SD card.
Incidentally, your T|X supports 802.11 WiFi, and the Missing Sync for Palm OS also supports synchronization via WiFi. You can easily configure that using the Network Synchronization Assistant under its Help menu. Faster and 'cooler' than Bluetooth, in my estimation. That's one way to deal with the cordless mouse interference issue!

Similar Messages

Help - Nokia C200 - USB Cable Issue

Hello! Friends...
First I Thank to ajaydavidson for my previous probem..
& Now I find some difficult when I am connection with my USB Cable to My Nokia C200.
I ll post the Screen Shot, Then it bit clear to solve this... Click here!
Error: Hi-Speed USB Device Attached to non Hi-Speed Hub
Please tell the right solution to me!....

The cause is your computers USB ports.
The solution is to buy a new USB adaptor for your computer. It's likely happening because your computer is old or is using an older USB adaptor. The phone is capable of using newer, faster USB adaptors.
It should still work but with slower data transfer rates. If you are happy with your data transfer speed between phone and computer then all you need to do is ignore the message it gives you.

Micro USB cable issue

Hi everyone,
I bought my Z1 a month ago, and always used the cables I already had to connect it to my PC or on car charger, and the wall charger I have since my SGS2.
Today I tried the brand new one out of the box of the phone, and surprise, it doesn't work properly: connection is not stable, moving the cable causes connection or disconnection very quickly.
Does anyone had this problem?
Is it possible to get a new working cable?
Thank you

That might be a hardware issue, take it to a Sony repair center and/or back to the store
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Does iPOD default 1 year warranty cover USB cable?

I found out that my 5G video iPOD is not able to charge with PC due to usb cable issue (another borrowed cable works). I bought my iPOD 1 month back so it is still under warranty. Does the warranty cover the faulty USB cable?

Yes. Apple's warranty covers everything in the box.
Bring both the cable and the iPhone to an Apple Store for evaluation.

I have a USB cable for my iPod touch 4th gen. I have tried almost everything to make my windows computer find my iPod touch but its not finding it. Any help on this issue?

I have a USB cable for my iPod touch 4th gen. I have tried almost everything to make my windows computer find my iPod touch but its not finding it. Any help on this issue?

If not successful:
Try DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Try another USB port and cable
Try another computer to help determine if you have an iPod or computer problem

My ipod 1st gen battery went totally dead because the usb cable was defective. I've changed the cable. now when i connect my ipod to the netbook, itune is not launching automatically and windows does not recognize it......how can these issues be resolved

My ipod 32gb 1st generation battery went totally dead because the usb cable was defective. I have since replaced the cable but now itune will not launch automatically as it did before and windows xp does not recognize it. Nonetheless it is charging. However can i resolve these issues bearing in mind that i am not tech savvy?

have since replaced the cable but now itune will not launch automatically as it did before and windows xp does not recognize it.
Try disabling a/v software and turn off the Firewall on your PC.
Disable antivirus software
Turn-Windows-Firewall-on-or-off
Then connect the iPod to your computer. Launch iTunes. If your computer still won't recognize the iPod check out this article.
http://support.apple.com/kb/TS1538
Once your iPod is functioning again, with it connected to your computer, launch iTunes. Select the iPod under Devices in the source list on the left.
Select the box next to: Open iTunes when this iPhone is connected
That way iTunes should open automatically when you connect your iPod to your computer.
And iTunes / Preferences - Devices. You can have your iPod sync automatically whenever it's connected from the Devices pane.

N97 mini USB cable connectivity issue

Hello all,
I've tried to connect my N97 mini with the micro USB cable, and it seems not to work.
When I connect the device, It asks me to pick PC Suite, I choose it, but then, when it tries to install the phone on my laptop, it just doesn't work, and it says that the hardware might not work ok.
I have uninstalled and installed Ovi Suite 2 times, I have resetted the phone and it doesn't work.
It worked first with Bluetooth, but now that I try again, it just doesn't work anymore.
Please let me know what I can do.
Thank you!
Luisa
Message Edited by luisalunac on 21-Jan-2010 07:38 PM

Same issue here. Reset phone, cleaned and reinstalled all software but no success.
I tried the cable with different nokia models and it works fine, it is definitely a N97 mini issue.
Waiting for a firmware update to get this really basic function

HT5521 I have a lightning to usb cable which is 2m in length. Is there any known issues with trying to recharge an iPad 4 with this longer length. It seems to me it is taking much longer than a 1m cord to recharge.

I have a lightning to usb cable which is 2m in length. Is there any known issues with trying to recharge an iPad 4 with this longer length? It seems to me it is taking much longer than a 1m cord to recharge.

Axel,
I'm afraid a new SSD won't be different from your bad USB stick. I had similar issues over USB with both a (no-brand) stick and TWO 64gb Kingston SSDNow's (running Kubuntu 12.04 with Kernel 3.11, ia_64): it all runs exceptionally well (wanna know how it feels like booting in 5 sec?) for a few days - then suddenly you find yourself facing that dreaded (initramfs) prompt. You ask yourself: why? Did I upgrade grub lately? Did I upgrade the Kernel? I don't recall so. Ok, let's fix this... insert favorite live cd, boot, fsck...what???? THOUSANDS of errors??? Hundreds of files and directories corrupted, and the system is unusable - Reinstall everything from scratch onto another drive.
Rinse and repeat: did this 3 times. Then I found this analysis:
http://lkcl.net/reports/ssd_analysis.html
I also suspect USB power interrupts more abruptly than SATA power, at shutdown - basically aggravating any power interruption damages. So now I'm going to:
- buy an Intel S3500!
- add commit=1 to my mount options in /etc/fstab
- edit shutdown procedure to add a 5-10 sec pause after unmounting drives.
Just my two cents.
Andrea
Last edited by andreius (2013-12-29 16:51:04)

Original USB cable is missing something??? Not a firewire/usb issue!

This is what happens: can anyone explain?
I have two chargers with USB port (one in-car and one portable battery) that do not work with iphone 3g when the original white usb cable is attached; I don't get any message: they just do not charge the iphone. I even tried to use a different cable from my ipod but still... Then I tried to use the cable that came with the Proporta portable charger and guess what: _both of them now charge my iphone_!
So: what is exactly missing in the Apple cable?
And: where can I find another cable that works with 3rd part usb chargers?

Some USB power sources, even though they have the correct voltages, do not work. This is because they don't support USB negotiation, which allows devices to determine the precise capabilities of a host adapter. (this is unrelated to the USB vs FireWire charging issue.) Since the device doesn't respond to the iPhone's attempt to negotiate, the phone assumes it's not compatible.
Not sure how using that different cable could affect it, unless the cable itself has some circuitry in it to handle the negotiation.
PS
Here's some info from Wikipedia:
"There are also devices at the host end that do not support negotiation, such as battery packs that can power USB powered devices; some provide power, while others pass through the data lines to a host PC. Some of these devices can supply up to 1 A of current. Without negotiation, the powered USB device is unable to inquire if it is allowed to draw 100 mA, 500 mA, or 1 A."

Is anyone having issues with their iPhone 5 music controls in a 2012 Hyundai Accent, both on Bluetooth and using a headphone or USB cable? My music plays but I cannot skip songs without physically using the iPhone 5 controls. Thanks!

Hello,
I have an AT&T iPhone 5 purchased from an AT&T store - it is a normal phone, no changes, no jailbreaking. I tried using my phone and my girlfriend’s iPhone 5 with the USB auxiliary cable in my 2012 Hyundai Accent. No matter what connector I use (headphone, USB, auxiliary) it doesn't charge or allow me to use the Hyundai’s controls to change music. Music will play through the Bluetooth system, but I cannot control the music unless I physically touch my iPhone. My iPhone 4 has a USB auxiliary cable and works perfectly; it charges and I have full control of my music without having to touch my phone. Nothing works even if I use the adapter that connects the iPhone 4 charger end to the iPhone 5. The picture below shows the iPhone 4 USB cable but it needs to have the (blue) iPhone 5 adapter.
Here’s the best part of this whole situation. I was told by Hyundai Customer Care that there is a specific USB cable available for my iPhone and that I need to contact a dealer. However, two Hyundai dealerships have told me that they do not have a cable, that Apple has not made a cable for the iPhone 5, and that I need to contact Apple directly or order it from an Apple store. It gets better. I contacted an Apple Store and they told me to contact Hyundai. I explained what I wrote above and they put on a call with Apple Customer Care. After 37 minutes on the phone with Apple, they still couldn't give me a satisfactory answer on how to get this cable or if they even had a cable (Case ID 505467409).
So here is the magical question: Is there a working adapter for the iPhone 5 that connect to a 2012 Hyundai Accent? It needs to play music, charge the phone, and work with the car’s controls. Thanks!
-sam

The problem is that you're using an uncertified lightning to 30-pin connector (the blue cable). If you purchase the 30-pin to lightning cable (either online, at an Apple store or an authorized dealer) it should work fine.
I have a 2011 Tuscon and tried the lightning to USB cable that came with the phone - no dice. Talked to my local Hyundai dealer and they don't have an eta on the Hyundai lightning cables (I'm sure it's in the works).
Lightning to 30-Pin Adapter (0.2M)
Part Number: MD824ZM/A
http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter?fnode=48
$29 in the US store, $45 in Canada (yes, even though our dollar has been par for years)

I cant figure out why my HTC Droid DNA is no longer recognized by my computer when i hook it up with the USB cable that came with the phone.

I used to be able to just plug in my phone with the USB cable to my Windows 7 computer and browse phone storage with no issues. Now my computer sees it as an android phone but when it tries to automatically install the drivers for my phone on the computer, i get an access denied error message. No option on the phone that i can see that allows me to mount phone as a usb drive. This used to work just fine with nothing more than just hooking up the cable. What gives??

Let's get that access granted again, e_rock_b. The HTC DNA doesn't have a special USB Mass Storage Mode that needs to be turned on. Usually, it's as simple as connecting and browsing http://vz.to/1jktbZD as you mentioned. If your computer is no longer allowing that easy access, try the steps at http://vz.to/1jktvr6.
JenniferH_VZW
Follow us on Twitter www.twitter.com/vzwsupport

HP Envy 4500 wireless will not print without USB cable

My HP Envy 4500 wireless printer/scan/copier does not seem to be able to work without the USB cable. I followed the instructions provided to change for USB to wireless but it will not work without. I have uninstalled and reinstalled the software. I have windows 7 on my laptop and an IPod both of which show that the printer is showing. I made it the default printer. The first time I tried to do it (without the USB cord) I was unable to get passed putting in my wireless password which starts with a capital K and wasn't certain how to make a capital so reread instructions and used the USB but really want to use it wireless. Any suggestions. I turned the firewall off this morning to try but to no avail. If I do need to turn the firewall off would I then put it back on if it gets working? I would so appreciate any suggestions!

@Chaitaishanwelcome to the community,
I understand you're having some difficulties when trying to set your Envy 4500 up on your wireless network. I have looked around and found this guide for you to try out. If you run into any error messages, codes, issues, etc, please let me know the specific details and I will continue to research if need be.
An 'Unable to find printer' Error Displays for the HP ENVY 4500 e-All-in-One and HP Deskjet Ink Adva...
I hope this helps you
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP D110 AIO printer. Prints jam when printing with wireless, but not when hooked to USB cable! HELP!

I have a HP D110. It jams the paper when I print with wireless, but not when I use USB cable. Any ideas?

From what you describe you are having issues printing from MS Office. Have you had trouble printing from other resources on your computer (e.g. from the internet or another program)? The first thing I am going to suggest is that we start by uninstalling and reinstalling the printer from the resources available online.
First if you use a USB cord, make sure to remove it (this is important). Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer.
In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it.
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3562006&lang=en&cc=us...
Install that and let me know the result!
Have a great day!

My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode

My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode as well as the DFU? mode and it still will not work. I have the latest version of iTunes on my Mac. My error code was 2002. I also tried it on my laptop (windows 8.1) and none of the above worked. My error code on my laptop was 02. The phone is through Verizon and it has absolutely no damage. It was working fine up until this and I have been trying to fix it for 2 days. Please help! I am unsure of what version the phone was currently running on before this because I have another iphone that's my primary phone and have not used this one in about a month. I do not believe it was updated to IOS 7.

Your iPhone is in recoverty mode at the moment so to possibly get it back up and running you would need to do a restore as you have been trying. Follow the steps in the article below for the specific error messages you have been receiving. If after following all steps the issue remains book an appointment at a local Apple Retail Store to have the iPhone evaluated.
Resolve specific iTunes update and restore errors

My itunes said I needed an update, I unplugged the ipod touch and reset everything. When "connect to itunes" showed on the screen, I plugged it back in and Itunes no longer recognizes it. I tried 4 usb cables, 4 different computers, all new itunes

I've gone through all the troubleshooting of restarting computers & itunes and updating itunes. Trying to put in to DFU mode. I've tried everything. iTunes just doesnt recognize this ipod. I have multiple ipods/iphones, and everything else works. I am eliminating the people who are saying it's a broken pin, that cannot be it, because immediately before that moment, it was connected, everything on my ipod was listed in iTunes. It just promted me to update to 6.0.1 (or whatever the most recent is) I also seen a lot of issues posted on the web of people who had jailbroken phones. This ipod touch is standard, there were no jailbreaks or anything used ever.
There was a program called Wondershare Dr.Fone, which is said to be a photo recovery tool for ipods, to retrieve recently deleted photos. (Guess I shouldn't have been trying to do that) I downloaded this trial and when it opened it stated that Itunes and this could not run at the same time. It shut down iTunes automatically. At that point, I didn't do anything more with the Wondershare Dr. Fone, I didn't try to run the program or anything. iTunes prompted me that the device needed to be upgraded to 6.0.1. I had an option to download or download and install the updated 6.0.1 from Itunes. I clicked on download only. So iTunes was downloading the new version from my iPod Touch. I shut it down the Wondershare Dr. Fone, unplugged the iphone from itunes/computer, went in to settings and did a master reset. I plugged the device back in to the computer when the iTunes logo and usb came on the screen, and the computer/iTunes doesn't recognize it anymore. I've tried 4 different usb cables and four different comuters all with up to date iTunes software. I did not break the port either, nothing is inside the port, or blocking it in anyway. All 4 computers and usb cables connected fine to other ipods and iphones.
So the questions are:
How can I get my ipod out of restore mode (iTunes logo and usb cord sybol) without iTunes recognizing it?
What could I have possibly done to this ipod?
Why doesn't anyone have the answer anywhere on the internet?
(Note: Even if the Ipod is placed in DFU mode, iTunes does not recognize it)
Please help!
Yours Truly,
Me & My UnRestorable IPOD TOUCH

Hello Philly,
I believe that when you reset your ipod(command given from the computer, right?) touch WHILE the ipod was updating, It cleared the system in the middle of writing files, thus corrupting(equivalent of cutting of in the middle of a sentence) the basic running system.
I suggest you go to an apple store and ask for a technical diagonosis in person. they may offer to help if the problem is fixable. If your ipod is still under warrenty, i would guess it would be free/low cost.
~Remember, I am just giving an educated guess on limited information

USB Cable issue

Similar Messages

Maybe you are looking for