USB Cable no longer responding after iTunes update?

I recently downloaded the iTunes update version 6.0.4 to my Dell Laptop. However, when I go to synch up my iPod, upon plugging in my iPod, I get a message from my computer that says "USB Device not recognized". I have tried the USB connection in numerous USB docks, however keep getting the same message. The iPod says "Do not disconnect" but it does not synch up with iTunes, even after I leave it there for about 10 minutes.
I have downloaded then re-installed the iPod Updater Version 2006-01-10 and re-booted my computer but still the USB connection is not recognized.
Any suggestions? Thanks!
20GB iPod   Windows XP  

See these.
Your Windows PC doesn't recognize iPod.
iPod appears in Windows Explorer but does not appear in iTunes.
iPod does not appear in iTunes.
Fast user switching in Windows XP is not supported.
Strange iPod behavior.
When restoring the iPod, put it into disk mode first.
Putting iPod into disk mode.

Similar Messages

  • Leopard USB install no longer boots after software update

    Hi all,
    I have recently installed Leopard onto a USB partition in order to perform maintenance on my main Leopard installation. Installation proceeds without a problem however after downloading software updates the USB partition will not boot successfully, despite there being no problems with the disk / volume structures / apparently anything at all. In desperation I also tried to install Tiger, which worked, however I have the same problem after updating - it will not boot! I don't think my hardware is at fault - Techtool Pro tells me all is in order.
    Has anyone had this problem and if so, how did you fix it?
    Thanks,
    Jason

    I just installed Leopard onto a USB 2.0 external hard drive for a dual-boot. It booted fine at 10.5.1 but is taking ridiculously long to boot after 10.5.2 (I just got it to finally boot after the update while waiting more than 40 minutes!).
    It seems that you may want to attempt booting several times - maybe turning off the machine in between or booting to the internal OS first and then to the external. Can't help you much beyond that as this is my introductory experience with this mess.

  • IPad/iPhone file browser (iPhone Explorer) no longer working after iTunes update

    iTunes freezes up on me a lot when I connect my iPad, so I prefer to add files to apps using a file browser like iPhone Explorer. However, after this most recent iTunes/Quicktime update, this and other programs like it don't work.
    My computer is running Windows XP (yeah, I know it's old, but I'm not made of money!). I have an iPad 2 with the most recent iOS version installed.
    Here's the error message iPhone Explorer gives me:
    "iPhone Explorer is unable to load the app directories because the version of CoreFoundation.dll installed on your system doesn't work properly. This sucky DLL likely got on to your computer because of a recent update in the Safari web browser. Because this sucky DLL is shared between many other Apple programs, reverting back to the non-sucky version is more complicated than just uninstalling and reinstalling a couple programs. We recommend waiting a couple months for the next Safari update and hopefully Apple will have this stuff fixed then."
    I don't have Safari installed on my computer. Just iTunes (and Quicktime).
    As a result, you can't browse the app directories, so you can't add any files to apps. I tried uninstalling iTunes and replacing it with an older version, but it wouldn't open because it said the library file was created by a "newer version." I'm also having some trouble even getting iTunes to show the files in my apps (under iPad -> Apps -> scroll to bottom of the screen), but that might just be a symptom of my old iTunes-freezing problems.
    I'm kind of stuck. Anyone else experience this problem or have any suggestions? Thanks!!

    That's XP SP3 I hope?   iPhone Explorer support is shown at the bottom of the page you linked above or at [email protected] and it's them you should be asking really.
    You should be keeping iTunes and the iPad software always up to date for security reasons.   If that breaks external software then they are the ones to ask.
    If you are having problems with the iPad then try resetting it by clicking the Home and Sleep buttons simultaneously for about 10 seconds until the Apple logo appears.  You wont lose anything.
    If iTunes is acting up then try asking on that forum:  https://discussions.apple.com/community/itunes/itunes_for_windows

  • Usb devices no longer work - after itunes 8 uninstall as well.

    Have uninstalled itunes 8 as outlined in various posts on internet. However, now none of my devices such as camera and printer are recognized by my computer. Hope someone has solved this problem. Thanks.

    Hello, Emir,
    I'd suggest you ask again in the MacBook Pro forum. This forum is intended for old, pre-PowerMac G3 hardware and so not the most likely place to get a quick and applicable response.
    Regards.

  • IPod screen showing only USB cable to be connect to iTunes after Update and Restore.

    My 4G iPod model no is A1367 and the software version is 4.2.1, so as it’s a very old version i wanted to update the software to iOS 6.1.6, so I have taken backup, then Update my device with iOS 6.1.6 after that I tried to restore my device, it started to downloaded (847.8 mb)  iOS 6.1.6  again and again and iPod screen showing only USB cable to be connect to iTunes. please tell me how should i resolve it.

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
    After you have Recovered your Device... Re-Sync your Content

  • Why is there a iTunes icon with a USB cable on the screen after a Apple TV update

    Why is there a iTunes icon with a USB cable on the screen after a Apple TV update

    The iPad could be in recovery mode.
    You may want to follow these instructions:
    http://support.apple.com/kb/HT1808

  • HT4623 why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

    why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

    You are in Recovery Mode. Follow the instructions below to recover your iPad.
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
    3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
    5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

  • Why tethering with USB cable doesn't work after IOS6.0 update?

    why tethering with USB cable doesn't work after IOS 6.0 update?

    Try updating the carrier settings, if that doesn't do it try following along with this Apple doc -> iOS: Troubleshooting Personal Hotspot

  • Have tried to restore iPod twice but still showing only USB cable to be connect to iTunes..

    I have download and update iPod touch (4th generation) running firmware version 4.2.1 to iOS 5 or later through iTunes 11.1.5.5 so i have tried to restore iPod twice but still showing only USB cable to be connect to iTunes. Nothing is happening. so please tell me how to resolve it.

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4
    Some users have reported as many as 8 or 9 attempts were necessary before success.
    If the issue persists...
    Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...
    Also see your other post >  After updating iOS iPod is showing only iTunes log with USB Cable..

  • When syncing with itunes, got error message saying had error and now ipad2 will not do anything other than showing the USB cable with arrow pointing to Itunes on screen.  have done the reset and restart, but still get same thing.

    when syncing with itunes, got error message saying had error and now ipad2 will not do anything other than showing the USB cable with arrow pointing to Itunes on screen.  have done the reset and restart, but still get same thing.  Ipad does not show up in itunes even though cable plugged in.  Have shut down and restarted Windows 7 computer.

    I had done all of that to no avail.  I did call Apple Tech Support and after he suggested I try a USB port in the rear of the Win 7 computer, things starting working again.  I had tried switching the USB port at the front of the machine but that had not helped.  Everything is good to go again.  thanks for  your reply

  • We recently updated to Lion, prior to this update we could plug in our Sony Mini DV camera using the appropriate firewire and the iMovie would recognize the camera. This function no longer works after the update to Lion. Any suggestions?

    We recently updated to Lion, prior to this update we could plug in our Sony Mini DV camera using the appropriate firewire and the iMovie would recognize the camera. This function no longer works after the update to Lion. Any suggestions?

    Zap the PRAM and Reset the SMC, then try again.

  • HT4061 My gateway PC is locked up after itunes update.  When i restarted the computer for the hangers to take effect. Now my pc is locked up.  It gives me a client Mac address and no boot file name received.  What happened, and how do I get my pc back?

    jute way pc locked up after iTunes update.   It says client Mac address 001320 be ad 25 .  PXE E53  No boot file name received
    pXE MOF.  Exiting Broadcom PXE. ROM .  How do I unlock my pc?

    jute way pc locked up after iTunes update.   It says client Mac address 001320 be ad 25 .  PXE E53  No boot file name received
    pXE MOF.  Exiting Broadcom PXE. ROM .  How do I unlock my pc?

  • Hello. My Apple TV is flashing quikcly and I dont have a micro-USB cable to connect it to iTunes. What can I do?

    Hello. My Apple TV is flashing quikcly and I don't have a micro-USB cable to connect it to iTunes and restore it. What can I do? Thank you.

    Buy the cable, or take it to Apple.

  • HT1386 is USB Sync no longer available under iTunes 11?  I can't get my iPhone4S to sync anymore.

    is USB Sync no longer available under iTunes 11?  I can't get my iPhone4S to sync anymore.

    See either http://support.apple.com/kb/TS1538 (windows) or http://support.apple.com/kb/TS1591 (mac).

  • HT1551 I have a USB cable showing up and the iTunes logo, what do I do?

    I have a USB cable showing up and the iTunes logo, what do I do? 

    it's trying to tell you that you need to use an usb cable to connect
    the appletv with a computer running itunes so you can restore the firmware of the appletv

Maybe you are looking for

  • Problem in the SOAP ADAPTER

    Iam getting following error when iam trying to view the wsdl for bapi_user_get_details.Any help? Error when processing your request What has happened? The URL http://pdcntwr.wipro.com:8000/sap/bc/srt/rfc/sap/bapi_user_get_detail was not called due to

  • I had quicktime pro, I upgraded to snow leapoard and installed iLife and lost quicktime pro. How do I get it back.  I tried re installing quicktime but it will not let me??

    I had quicktime pro, I upgraded to snow leapoard and installed iLife and lost quicktime pro. How do I get it back.  I tried re installing quicktime but it will not let me??

  • ITunes not opening - aargh!

    Hi, hoping someone can help me. I have just upgraded my iTunes to 8.1. When I try to open it I get the following message: iTunes cannot run because some of its required files are missing. Please reinstall iTunes. Is reinstalling the iTunes my best op

  • Language change in work flow

    hi,   I would like to know how to change the work item language(in inbox the work item subject should come in the language in which a person logs in to the system)say if a person logs in french the work item subject in inbox should come in french.lik

  • Audio over multiple slides in Captivate 5

    I am new to using Captivate 5 and i'm trying to record audio in Captivate that will play while 3 slides advance on their own. I read something on a past thread that talked about clicking a "slide divider" - I can't find the "slide divider" and about