USB cable required for Canon IP4200??

Hi
I may be having a bad day or maybe I'm just dumb but anyway.... I just bought a Canon IP4200 printer and installed teh driver. Now it doesn't come with a USB cable so looking at the USB port on the printer it looked like the ones on my iBook, so I bought a A male to A male cable. Then I plugged both ends in to connect the 2, however as you've probably guessed it doesn't recognise the printer.
A quick online check reveals that I seem to need an A male to B male cable. However when I see the picture of this, the B male connector is a different, smaller shape and I cannot figure out where that would fit into if I bought it. The A male connector I am fine with as that looks like it can go into either the iBook or the printer but the B male I have no idea! Can anyone advise on what I am doing wrong or am I just mad???
Thanks
JSC

There was, before you posted a reply (the second comment, the question on how to delet the post). Now your post has received an answer, it can no be deleted. Sorry

Similar Messages

IPod shuffle usb broke does usb cable exist for suffle or components shop?

I broked my Shuffle usb where can i borow that pice that was in the usb head back I cant repair it the usb falled from the ipod. At the gsm doctors thei told me I need that peace for repairing dose anibody know a cite where i can borow it? or dose an usb cable exist for suffle?

iPod Shuffle 1st generation (grey buttons equipped
with latest software) USB Does Not Work:
-When charging with the Adapter, iPod does not
charge. No light comes on.
-When charging with Computer, iPod does not charge.
No light comes on. iPod used to charge to the
computer. Computer has the System Requirements for
the iPod.
-When iPod is put in the Computer, no light comes on,
the iPod is not recognized. iPod used to work with
the computer. Computer has the System Requirements
for the iPod.
-The USB in the iPod looks perfectly fine. Identical
to a different iPod Shuffle 1st generation.
-iPod never broke or had damage problems. The USB
just stopped working.
-The Battery of the iPod still works and the iPod
still lets me play music, but since I cannot charge
it, the battery will eventually not work.
-iPod was purchased in November, 2005. (last year).
What is wrong with my iPod? Thankyou for your time.
It's defective... return it for a replacement at the point of original purchase, an Apple Store, or ask for replacement on line http://www.apple.com/support/contact/

USB Recording - requirements for the external USB drive

What are the requirements for the external USB drive to be recognised by the TV?
I've tried two now, which can both be seen by the TV to show media, but neither are recognised by the TV to be used as USB Recording space.

Hi,
I have a similar question.
I have a 40L6353 and I cannot seem to playback anything recorded onto USB.
I have tried a large 500 Gb Toshiba (USB powered) drive and 2 or 3 others such as an 8 Gb SanDisk and a smaller capacity non branded 500 Mb stick.
All of the above I have formatted in the TV. When I press record the pop-up staes that recording has started and when I press stop it asks me to confirm. When I go to the recorded list it shows the files but says that they are an unsupported file format!!
I can play videos and music transferred to another Toshiba 500 Gb drive by PC.
I have also tested the sticks and they pass the 2 on-screen tests and I believe when a stick is inserted I can pause live TV.
Does anyone have any ideas?
I have been trying to get this to work for over a week - if there is a fault I will need to go back to the vendor but I want to be sure it isn't operator error.
Thanks in advance.
Message was edited by: banzai

Max USB cable length for LT1421

Does anyone know how long the USB cable can be for connecting the LT1421 flat panel to the computer?
The screen is delivered with 1,8m but I must place the panel in a least 6 meter distance from the computer, is that possible?
I know that the max length for USB 2 is about 5 meters, but it varies between products how sensitive they are to cable length.

3 meters for USB1 and 5 meters for USB 2. You can find lots of information on the subject with a quick search. Try http://www.usb.org/about/faq/ans5 for starters. It explains how to get up to 25 meters of USB cable when you use several USB hubs.

USB Cable replacement for ZEN touch (40

I have lost my USB cable and was wondering if all creative products deal with the same typ e of USB connection because I have looked for a replacement and only found ones that were compatible with such creative players as zen xtra or zen nx

Any USB A to mini B cable should work. IF you have a digital camera, you may already have one.
Here's an example:
http://www.cablestogo.com/product.as...d=50&sku=27329

Usb cable software for nokia 2626

How to connect nokia 2626 with pc. please advise correct software support.

About my problem above, i followed the process below which is written in the user guide :
"So that you can use a connection by cable, a pilot of cable of data USB must be installed on your PC. You can use the Transfert functionality of data without installing of pilot of cable of data USB. Select Menu > Connectiv. > Câble USB. You can connect your apparatus to a compatible PC using a cable of data USB.
Connect the cable of data USB on the basis of the apparatus. To
change the type of equipment that you normally connect to your
apparatus using the cable of data, support on the joystick. [...]
Transfer of data - Reach data such as audio or photo files on your computer and transfer them since this one by using a connection by cable of data. To use the Transfer mode of data, take care not to select the type of connection USB in
the parameters Manage connections of Nokia PC Continuation. Insert a memory board in your apparatus, connect this one to a compatible computer using the cable of data USB and, when the apparatus you request to indicate the mode used, select Transfert of data. In this mode, your apparatus plays the part of peripheral of storage of mass and, on your computer, it seems a removable hard disk."
The USB cable used is a Nokia device.

Can I detect USB cable unplugged for USB 6229

I am using a USB 6229 to control a moving machine. As a safety mechanism, I would like to be able to detect if the USB cable becomes unplugged and stop the machine.
I thought maybe I could use the Watchdog functions in DAQmx to achieve this, but I get an error which says that watchdogs are not supported on the 6229. Does anyone know if there is a way to detect the USB cable is unplugged on the 'machine' side of the 6229, please? I could build my own watchdog timer and control it using digital I/O lines, but I wondered if I was missing something obvious?
Thanks,
Paul

Hi Paul,
I don't believe you'll be able to do set this up with your USB 6229. There aren't any safety features like watchdog timers on that device and I don't believe there's a signal or anything generated when the USB cable is unplugged. Your best bet would be to build your own watch dog timer or perhaps look at a DIO device with this functionality built in.
Sarah
Applications Engineer | National Instruments | UK & Ireland

HDMI cable required for importing?

I'm using FCE4.
iMac's don't have HDMI inputs. If I use a Canon HV20 and I shoot in HD does that mean that I cannot capture the footage at full quality using a firewire cable?
Does it matter if I use firewire 400 or 800?

Thank you for clearing that up.
I was confused because an HDMI cable is required to receive HD programming via a cable TV box.

Any printer driver for Canon ip4200 using OS 10.9.4?

Bummed that I can't use my perfectly good printer (and new supply of ink) with Mavericks 10.9.4

Gutenprint allows printing in the PIXMA iP4200, it's true, but there are no options for checking ink levels, calibrating print heads, or doing any type of maintenance or service on the machine anymore. And on the printing, it has 12 sub-levels of "fine tuning" but messing with any one of them results in printing an all-black sheet (wasting 1/5 of the black tank) so the only option left for print adjustments is "fast normal". Everything else doesn't work.
I don't know if this is a Canon issue, or another massive Apple ****-up with this new operating system.

USB chord required for AppleTV update?

When prompted to update my ATV, I clicked "Yes, Update Now," and then it went through these screens with loading bars, etc. etc. It ended up with an image on the screen that showed that I needed to plug in the usb chord to an iTunes logo (Im assuming my Macbook Pro). However, I did not know that a chord would be needed to update, and this particular chord did not come with the ATV.
My question is, Do i have to go out and buy this chord now? My internet connection is spot on, it just didn't work and now my ATV is unresponsive to the remote, it just shows that screen until it auto turns off. Is my ATV useless now until i buy that chord? Any help would be appreciated.
Thanks,
Max

No it is not the same cable.
I would direct your "****" to your ISP . The connection may very well have been lost during the update.

Audio Cable Requirements for New Apple TV

I'm about to order a new Apple TV. The specs are a little unclear on the audio side, as it says it has an optical audio output. However, does the HDMI port do audio out as well, or do I NEED an optical audio cable in addition to HDMI when my TV supports HDMI? Thanks for the help.

HDMI will carry audio. No need for a separate optical cable unless you want to run it to another device such as a receiver/amp.

RAW support required for Canon Sureshot S95

Have just bought the new Canon Sureshot S95
after contacting Adobe support I am told Lightroom 3 does NOT support raw files for the
Canon Sureshot S95.
Come on Adobe.....please provide an update asap.

I agree with hoping Adobe provides an update soon. I check every day - I love my little S95.
There is an interim solution.
Google exiftool by Phil Harvey (free)
Its a command line editor and will allow you to change the model and camera in your S95 .CR2 file to S90, which LR3.2 will read. It renames the original .cr2 file to .cr2_original and retains it, and names the creation .cr2. It allows you to change the model and camera data to S90, which Lightroom 3.2 will read. Works in batch mode. Plus you can leave the originals in the same directory as LR3 will not attempt to read the .cr2_original files.
The command line is
exiftool -model="Canon PowerShot S90" -canonmodelID="PowerShot S90" FILE
where file is the individual name or batch
Try it on a test .cr2 file. Only very slight downside is your EXIF file is tagged as an S90, and you have double the .cr2 files. (New .cr2 & .cr2_original) You can later use a renaming utility to remove the _original if you so desire.
Seems to work just fine in LR3.2 tho still hoping the next update includes the S95. This skips having to use DPP to convert to DNG.
Re worring about if you can read your RAW in 30 years. First of all, you are using the RAW to adjust to a final jpg or tif correct? Second, worry if your storage media works or exists in 30 years. CD's & DVD's have finite lives (using expensive archival disks?) and hard drives....
Hurry Adobe, we're waiting .

Printer driver required for canon

recently i have purchased canon printer lpd2900b i am not able to used it because i don't have driver of the printer. is there any solution ?

Is this your printer?
http://www.canon-europe.com/Support/Consumer_Products/products/printers/Laser/i- SENSYS_LBP2900B.aspx?type=download&page=1
It is only directly supported for Windows. But if you have the optional Server, it may work as a Netork printer.

HT1665 we have 2 Iphone 5 in the family for 6 months and 2 USB cables have broken already, is there a subsitute cable as the Apple one is usless

I have had 2 USB cables break for Ipone 5 within 6 months. These cables are very bad and I suggest a design fault
We had no problems with the older phone cables

8-doing a factory reset, then repeating steps 1 through 6
Do you mean a restore to factory settings?. If so did you set up as new or restore from back up afterwards?

Need Help for connectivity USB Cable Nokia 5800 ca...

Hi All,
I really need help to solve my problems. I just bought nokia 5800 XM last week. I already installed the CD software in my windows XP, but it seems that PC cannot recognize the USB cables. I have plug in an unplugged... At firstime it detects my nokia 5800 XM, but when I open PC suite or OVI, it doesn't connect the USB cables into PC. I already install and uninstall The OVI suite but it is still the same, when I try it in OVI suite to detect my phones, it doesn't react.... I also have download from Nokia website to install manually Nokia USB cable driver for my cable type CA-101... it seems nothing works here... tell me what should I do? I don't think that the USB cable I bought is fake, it has original guarantee..... please desperately need help! Anybody?

When you plug the phone into the computer, ON THE PHONE it should ask you which mode to connect in, and you should select "PC Suite" mode. Does this happen?
Ravi

USB cable required for Canon IP4200??

Similar Messages

Maybe you are looking for