USB Cable stopped working

I've had the phone 2 months and the cable is mint but it just stopped working....
Is there any way I can get a replacement online?

If you bought the phone new in a box then the accessories are guaranteed for 12 months
You may want to
1. Try the cable on another device
2. Try another cable on the phone - to confirm
3. Take the cable back to where you purchased the phone from or an Apple store
4. If you want to do this online - open a chat with Apple
This is a user to user forum - we are all iUsers here

Similar Messages

  • Why does my usb cable stop working

    So I have bought about 7 usb cables in the past 8 months for my iPod 4, and they all have broken within a month or two. Why is this happening?

    Just how are they "broken"?

  • Lightning USB Cable not working

    My lightning USB cable stopped working today. I tried to plug it in and it didn't charge my phone so I unplugged it and saw that one of the sides of the iPhone hookup looks kind of burned abs chipped off. I would post a picture but I'm not sure how.
    I just bought this iPhone 5 2 weeks ago, so I'm a little disappointed. Do you think apple will supply me with a new one?

    I suspect that they will, but the only way to find out for sure is to contact them. Use the correct phone number on this page. Alternatively carry the phone and cable in to an Apple retail store or service provider.
    Note that the Apple accessories for the iPhone fall under the same warranty as the phone itself.
    Best of luck.

  • 1 of 2 USB ports stopped working after 10.7.2 upgrade

    I have the newest Macbook Pro.  I upgraded to 10.7.2 today and immediately after, 1 of my 2 usb ports stopped working.   Thought it may be the cable, so I switched cables.  Tried plugging in my iPhone, my portable drive and nothing.   Both work on the other port though.   Both ports worked fine before the update. 
    I've rebooted 4x. 
    Suggestions?

        Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
      If this does not help, contact Apple.
      Genius Bar reservation
      http://www.apple.com/retail/geniusbar/
    Best.

  • USB ethernet stopped working on 10.7.4.

    After I upgraded to 10.7.4, the usb ethernet stopped working. When I plugin the usb ethernet port, it still shows "Cable Unplugged". Any suggestions? Thanks.

    FIxed my problem!
    After years the problem was solved somply!
    Go to System preferences
    Go to Ethernet
    Go to Advance
    Go to Hardware
    The just make the changes like in the pictures below

  • HP Pavilion dv6 All 4 USB ports stopped working

    Hello,
    I recently bought a Pavilion dv6-6c11sa laptop. Windows 7 Home Premium 64-bit
    Everything was working fine for about a week, and then yesterday all of the USB ports stopped working. I have 4 USB ports in total, two 2.0 and two 3.0. No matter what peripheral device I plug in, mouse or flash drive etc, they're not recognized by the laptop. The lights don't even light up on the devices, regardless of the port. I've tried uninstalling and reinstalling the drivers in device manager, taking out the battery and rebooting, installing the chipset drivers (AMD), nothing works. No programs had been installed 3 days prior to the occurence, although I had rebooted several times in that time frame. I simply booted up the laptop yesterday, and nothing worked.
    Could anyone offer a solution or suggestion, please?

    Hello,
    I recently bought a Pavilion dv6-6c11sa laptop. Windows 7 Home Premium 64-bit
    Everything was working fine for about a week, and then yesterday all of the USB ports stopped working. I have 4 USB ports in total, two 2.0 and two 3.0. No matter what peripheral device I plug in, mouse or flash drive etc, they're not recognized by the laptop. The lights don't even light up on the devices, regardless of the port. I've tried uninstalling and reinstalling the drivers in device manager, taking out the battery and rebooting, installing the chipset drivers (AMD), nothing works. No programs had been installed 3 days prior to the occurence, although I had rebooted several times in that time frame. I simply booted up the laptop yesterday, and nothing worked.

  • USB Ethernet stop working after 10.7.5 update

    After updated to 10.7.5, my usb ethernet stop working, and always shows it doesn't connect.
    Reinstall 10.7.5 make no difference.
    How do I solve it?
    Thanks!
    Yu-Hsuan

    Or download it directly from ASIX Electronics instead of driversworld.us.
    Product family: USB 2.0 to fast Ethernet
    Product name: AX88772
    URL: http://www.asix.com.tw/download.php?sub=downloadsearch&PSNoID=101
    I installed it and my AppleUSBEthernet started to work.
    The error i had (sudo dmesg):
    AppleUSBEthernet::monitorLinkStatus - Link down, Device b470200
           0        0 AppleUSBEthernet: monitorLinkStatus - Link partner register is bad, re-trying...
           0        0 AppleUSBEthernet: monitorLinkStatus - Link partner register is bad, trying to reset...

  • A barcode scanner that was connected directly to the Mac's USB port stopped working as the "USB had too much power drawn", even though it has worked for over a year in that port.  WHen we plugged it into the port on the keyboard, the device works. Why?

    A barcode scanner that was connected directly to the Mac's USB port stopped working as the "USB had too much power drawn", even though it has worked for over a year in that port.  When we plugged it into the port on the keyboard, the device works. Why?  Obviously the device is operational.  Could the USB port have burned out from having too much power drawn?  If so, is it reparable?

    It can't draw "too much" power, it can only draw as much as the USB port is able to provide and no more. IIRC, the keyboard port has a lower power output than the iMac's port.
    That being said, yea, it's possible that the port has failed and it can be replaced or if another port works you can use that one. Although if it is still under warranty or covered by Apple Care, then I would take it to an Apple Store or service provider to get the port repaired.

  • USB Video stopped working with 3.1.8 update

    I have been using iChat video with my USB camera for a while with the help of iChatUSBCam. The new update of iChat (3.1.8) included support for USB cameras and once installed my USB camera stopped working with iChat. It just reports the camera is in use by another application. I've been browsing for answers for a while and have tried many things:
    - Restart in various combinations of unplugging and plugging in the camera
    - Reinstalled the Macam driver
    - Reinstalled Quicktime
    - Uninstalled iChatUSBCam (since iChat is supposed to work without it now - I think...)
    - Reinstalled iChatUSBCam (v 2.2.1 - current)
    It's a Logitech Quickcam for Notebooks Deluxe. It continues to work fine with Skype and the the Macam camera tool. I'm using Skype for now (on tour for 6 weeks and use it to video call home) but the quality is crap compared to what iChat used to do.
    Thanks for any help you can give.
    Stranded in the UK with no decent video chat
    Matthew
    Powerbook 12" 1GHz - 1.25G RAM   Mac OS X (10.4.9)   Logitech Quickcam for Notebooks Deluxe

    Some people have reported that Updating iChatUSBCam
    and deleting the Macam drivers and then the
    com.apple.ichat.plist is the way to go.
    Thanks for your help!! I tried these things before, but tried them again in the order you suggested with no success. I'm pretty sure it is not a UVC compliant camera. It's not on Logitech's list of UVC cameras.
    M/N: V-UBG35
    P/N: 861228-0000
    PID: CE6420A
    If I try it without the Macam drivers it doesn't show up as a camera is connected at all.
    It's so frustrating because it was working great with iChatUSBCam until the recent update. It still works in Skype with no problems, but I'd rather be using iChat if I can - much better video quality.
    Thanks for any suggestions!
    Matthew

  • My USB webcam stopped working after I upgraded to OS X 10.6.8

    When I installed the upgrade to OS X 10.6.8 my USB webcam stopped working. 
    Any idea how to get it back.

    Upgraded from what to 10.6.8?
    Did it work before?
    What camera?

  • One usb port stopped working today

    One of my USB ports stopped working today. I think it may be related to Itunes update today. Has anyone else seen this recently? I restarted my computer - but that didn't help. I have a MacBook Pro - running Lion 10.7.5
    Any suggestions? I saw one USB Hub when I went to Apple --> About this Mac, but couldn't tell if both were there.

    http://www.ehow.com/how_7351075_reset-usb-ports-mac-laptops.html

  • Brand new Macbook pro one USB port stopped working

    Brand new Macbook Pro 15 with Retina display. One of the USB ports stopped working after 24hours.

    Serial Port Configuration and Port definition is reset by
    NVRAM  http://support.apple.com/kb/ht1379
    If no good I would return the machine ASAP:
    Genius reservation http://www.apple.com/retail/geniusbar/
    check warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • HT1379 MacBook Pro USB port stopped working

    USB port stopped working....
    How can I diagnose my USB port to test for hardware or software problem

    Try Resetting the System Management Controller (SMC)

  • USB ports stopped working in my Macbook Pro

    USB ports stopped working in my Macbook Pro

    I do not know anything about audio consoles nor do I have an iPhone.
    My iPod also does not show on the desktop but it is recognized in iTunes,  Check if that is the case for your MBP. 
    Do you have the appropriate boxes checked in Finder Preferences?
    See if this support article is of any assistance:
    http://support.apple.com/kb/TS1410
    If you have an external HDD, connect it to your MBP and see if it is recognized.  If it does not show on the desktop, check Disk Utility.
    Have you tried all USB ports?  It could be that the problem lies in your MBP.
    Ciao.

  • My USB ports stopped working. So did my dvd drive. I have a Pavillion Laptop. Model 1245dx.

    My USB ports stopped working.  Do did my DVD drive.  I did do a Windows update yesterday.  Any ideas out there?  I can't use my mouse or printer.  Help!

    Try a windows system restore, pick a date before the windows updates were installed.

Maybe you are looking for