USB cable will not plug into my 6555.
The USB cable that came with my 6555 will Not plug into the phone. It seems to be slightly too big. The Nokia Accessories page lists CA-101 as the right one (for $30.00). However, the cable that came in the box has no designation so I cannot confirm the right cable was packaged. I bought this phone at Best Buy and there is no reference on their web site for a USB cable accessory. I do not want to order a $30 part to replace one that was mis-packaged. Does anyone have experience with these micro-USB cables and can confirm which is the right one and where to obtain one? Regards.
Solved!
Go to Solution.
As promised here is my follow up.
I went to Best Buy and talked to the sales team lead. The cable that was packaged in the 6555 box has a *mini* USB connection. The pjone requires a *micro* USB connection. So, my assessment that the cable end would not fit was accurate. The box was missing a small adapter that converts the mini cable end to a micro cable end. He offered to sell me a universal USB cable with the adapter included for half the listed retail price. I paid $8.00. (better than the $30 for a CA-101 from Nolia).
The adapter fits the 6555 USB port. I tried both the universal cable and the Nokia cable to link to 2 of my PCs (w/ Win XP) after installing the Nokia PC Suite. Neither worked. It seems that the PC does not recognize that the phone is there. I know there are other posts with related issues on this forum. So I will drop this thread and search for answers to the latest problem.
Thank you to all the folk who have shown an interest here and posted your thoughts / suggestions.. Regards, Bryan
Similar Messages
-
CAN SOMEONE PLEASE HELP ME OUT WITH THIS IMMEDIATELY???
That font color is almost unreadable, please use another.
Your iPod Classic almost certainly is not USB, but FireWire
USB
FireWire
I know this because the USB (type A) socket has not changed since it came out and early iPods were FireWire, not USB> -
My Profire 2626 will not plug into new i mac
My Profire 2626 will not plug into new i mac
You probably need a FW 800 (9 pin) to FW400 (6 pin) cable.
x -
Vista - a cable is not plugged into the network adapter
It works fine on the following:-
Mac 10.5
Wifi vai apple extreme
Enthernet via DSL
But on Vista (with same machine BootCamp)
Wifi Ok
Enthernet via DSL failed with the error message "a cable is not plugged into the network adaper "local area connection"
I have update the drive of Marvell Yokon 88E8058It's on the rear, just above the LAN cable (internet cable). PS> Your not reading all that is asked.
Step 1: Checking cables and connections
Use the following steps to check connections and networking hardware.
Check the activity light next to the network connector on the back of the computer.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus -
Internet connection error saying a cable is not plugged into the network adaptor
Hi, I have a
HP Pavilion Media Center m8530f Desktop PC recently my hard drive quit working so I installed new hard drive same brand Seagate just bigger storage had to install using my original recover discs that I created when I bought computer in 2008 from HP refurb it is still all original no upgrades and when finish could not connect to internet, get message a cable is not plugged into the network adapter "Local Area Connection", I have checked cable it is plugged into adapter I plugged cable into my laptop and it recognises it immediatly, I uninstalled network adapter and went to HP and downloaded adapter for my computer spec on to falsh drive and reinstalled on computer still same message, under devce manger adapter shows up and has no warning symbols when i run check on adapter it says it is fine.
NEED HELP, Thanks Ronbo68It's on the rear, just above the LAN cable (internet cable). PS> Your not reading all that is asked.
Step 1: Checking cables and connections
Use the following steps to check connections and networking hardware.
Check the activity light next to the network connector on the back of the computer.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus -
upgraded to ios7 iphone now displays itunes logo and usb cable will not restore, will not restart
Hi there emynona,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
-Griff W. -
ATV Update fail. What USB cable actually can plug into the back of this device?
My 3rd Gen ATV suffered a failed update over the weekend and now only shows a screen implying that I connect it to iTunes however none of the USB cables I can find will plug into the narrow slot at the back. Where do I get a cable from that can plug use to reset my ATV?
The Boston Rag.
What's on the other end of the USB cable? Your keyboard or mouse?
-Wayne -
New ipod classic. the usb cable will not disconnect. totally stuck
We have done everything we were supposed to do. as far as pressing eject and then squeezing the sides. The cable is totally stuck in the ipod. I don't want to use more force than we are using. This is our third ipod. We know how these should disconnect.
That font color is almost unreadable, please use another.
Your iPod Classic almost certainly is not USB, but FireWire
USB
FireWire
I know this because the USB (type A) socket has not changed since it came out and early iPods were FireWire, not USB> -
The earpod plug will not plug into the outlet and I don't want to push it too hard any suggestion?
The plug insulation should be touching the ipod body. so be more assertive with the push. Cheers!
-
iPad will not charge if hooked by USB to pc or plugged into wall. How do I know if the problem is with iPad, cable or power adapter. I have a 12, 10 and 5W adapters no success with any. Only one lightening cable so can't swap cables.
I'm sorry but this is too funny to pass up.
-
I plugged in USB cable but not showing connected status in my ipod 4th generation
I plugged in USB cable but not showing connected status in my ipod 4th generation
What have you tried so far in terms of troubleshooting this issue? Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
What happens if you try to reset the device with it still connected to the PC?
How to reset iPod
Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock -
When my phone is not plugged into the charger or computer, it will not turn on at all; even though it is not dead. When it's plugged into the computer, it will go to a white screen with a grey apple icon and then it will turn off again and repeat. IOS7 and iPhone 5.
http://support.apple.com/kb/HT1808
Try this step and if you cannot get your device into recovery mode there is a chance you have a hardware failure and you need to call apple to see what service options you have. -
My Ipod 4th Gen will not mount into Itunes
Please anyone with technical knowledge HELP ME.
The basic problem is that my 4th Generation Ipod will not mount into Itunes.
Let me tell you what I have done so far this includes all the R's, I have also followed the advice of reinstalling itunes and Quicktime I have also tried backwards installing to version 6 (at present I have upgraded to version 7.0.2). The ipod is visible in Windows and I still am able to use it as disk as I have programs I am using off it.
I have tried a fifth gen and also an Ipod mini and both mount onto my Itunes.
I have tried to reinstall the Ipod software, however the previous ipod updates do not work and as the Ipod cannot be mounted I cannot use Itunes to update it as it is not visible.
I have also run the Ipod Diagnostic in Itunes and everything seems fine (I have included the report if anyone can please understand it)and at the very bottom it states that the Ipod is truly Mounted. WELL ITS NOT
I really am getting desperate now as this is the same on both my Desktop and Laptop and I am getting very close to throwing the whole thing out along with all the rest of my computer equipment.
Thanks a lot
DIAGNOSTIC REPORT
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
FUJITSU SIEMENS AMILO PRO V2030
iTunes 7.0.2.16
iPodService 7.0.2.16 is currently running.
iTunesHelper 7.0.2.16 is currently running.
Current user is an administrator.
Connected Storage Devices:
IDE\DiskFUJITSUMHV2040BH______________________00000025, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskApple__iPod___________1.62, Bus Type USB
Universal Serial Bus Controllers:
VIA Rev 5 or later USB Universal Host Controller, PCI bus 0, device 16, function 0. Device is working properly.
VIA USB Enhanced Host Controller, PCI bus 0, device 16, function 4. Device is working properly.
IEEE 1394 Host Controllers:
Texas Instruments OHCI Compliant IEEE 1394 Host Controller, PCI bus 0, device 12, function 2. Device is working properly.
Connected Device Information
PAUL'S IPOD (E:\), iPod with Click Wheel running firmware version 3.1.1
Serial Number: JQ447113PQ7
Bus Speed: 61440
The last connected iPod serial number: JQ524ER2S41.
The iPod Service Logging Information:
[SERVICE: 0xDA8,09:16:59 INFO] Started C:\Program Files\iPod\bin\iPodService.exe (Sat Nov 18 09:16:59 2006)
[SERVICE: 0xDA8,09:16:59 INFO] ##### iPodService starting as a service, version: 7.0.2.16
[SERVICE: 0xDB8,09:17:00 INFO] Got signaled to go ahead... Starting device manager!
[SERVICE: 0x4F0,09:17:00 INFO] Listener Window created
[SERVICE: 0xDB8,09:17:02 INFO] [InterfaceArrival] \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0xDB8,09:17:02 INFO] device \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0xDB8,09:17:02 INFO] device is an iPod
[SERVICE: 0xDB8,09:17:02 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0xDB8,09:17:08 INFO] [-1] set waiting to mount = 1
[SERVICE: 0xDB8,09:17:08 INFO] [1] Assigning session 0
[SERVICE: 0xDB8,09:17:08 INFO] [1] added device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_objDeviceNameMap
[SERVICE: 0xDB8,09:17:08 INFO] [1] added state machine 1 to m_objDeviceIdMap
[SERVICE: 0xDB8,09:17:08 INFO] [1] added device number 1 to m_objDeviceNumberMap
[SERVICE: 0xDB8,09:17:08 INFO] [1] added device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_vctDeviceInterfaces
[SERVICE: 0xDB8,09:17:08 INFO] [1] input #0 from src #0
[SERVICE: 0xD24,09:17:08 INFO] [1] input #0
[SERVICE: 0xD24,09:17:08 INFO] [MACHINE 1 INPUT #0] - (HDW) Interface Arrival
[SERVICE: 0xD24,09:17:08 INFO] [1] progress state is 2, Waiting to mount = 1
[SERVICE: 0xD24,09:17:08 INFO] [1] progress is now 2
[SERVICE: 0xD24,09:17:08 INFO] [1] progress is now 2
[SERVICE: 0xD24,09:17:08 INFO] [MACHINE 1 TRANSITION] - {Unknown} ==> {Connected}
[SERVICE: 0xD24,09:17:08 INFO] [MACHINE 1 ACTIONS] - {Connected}
[SERVICE: 0xD24,09:17:08 INFO] [1] SCSI Inquiry attempt #0
[SERVICE: 0xD24,09:17:08 INFO] VendorId: Apple
[SERVICE: 0xD24,09:17:08 INFO] ProductId: iPod
[SERVICE: 0xD24,09:17:08 INFO] revision: 1.62
[SERVICE: 0xD24,09:17:08 INFO] vendor bytes:
[SERVICE: 0xD24,09:17:08 INFO] 02 01 00 00 00 00 00 00 00 05 00 13 12 00 00 00 00 00 00 00
[SERVICE: 0xD24,09:17:08 INFO] [1] firmware version: 1.62 (0x13E)
[SERVICE: 0xD24,09:17:08 INFO] [1] Power State: Not Powered
[SERVICE: 0xD24,09:17:08 INFO] [1] Checkpoint attempt #0
[SERVICE: 0xD24,09:17:08 ERROR] Did not find first letter of stage
[SERVICE: 0xD24,09:17:08 INFO] [1] serial number 000A270002BF5F21
[SERVICE: 0xD24,09:17:08 INFO] [1] *** CONNECTED - Sending event out, device session 0.
[SERVICE: 0x4F0,09:17:11 INFO] [SIMULATED VOLUME ARRIVAL] generating volume mount for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x4F0,09:17:11 INFO] [VolumeArrive] mask = 0x1C
[SERVICE: 0x4F0,09:17:11 INFO] looking up device # for \\.\E:
[SERVICE: 0x4F0,09:17:11 INFO] type 0x7 drive 0x1 partition 0x1
[SERVICE: 0x4F0,09:17:11 INFO] iTunes device #1 found with drive letter E, mask 0x10
[SERVICE: 0x4F0,09:17:11 INFO] [1] set waiting to mount = 0
[SERVICE: 0x4F0,09:17:11 INFO] [1] input #1 from src #0
[SERVICE: 0x52C,09:17:11 INFO] [1] input #1
[SERVICE: 0x4F0,09:17:11 INFO] looking up device # for \\.\D:
[SERVICE: 0x4F0,09:17:11 INFO] type 0x2 drive 0x0 partition 0xffffffff
[SERVICE: 0x4F0,09:17:11 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0x4F0,09:17:11 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x4F0,09:17:11 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0xDB8,09:17:11 INFO] [VolumeArrive] mask = 0x1C
[SERVICE: 0xDB8,09:17:11 INFO] looking up device # for \\.\E:
[SERVICE: 0xDB8,09:17:11 INFO] type 0x7 drive 0x1 partition 0x1
[SERVICE: 0xDB8,09:17:11 INFO] iTunes device #1 found with drive letter E, mask 0x10
[SERVICE: 0xDB8,09:17:11 INFO] [1] set waiting to mount = 0
[SERVICE: 0xDB8,09:17:11 INFO] [1] input #2 from src #0
[SERVICE: 0x4EC,09:17:11 INFO] [1] input #2
[SERVICE: 0xDB8,09:17:11 INFO] looking up device # for \\.\D:
[SERVICE: 0xDB8,09:17:11 INFO] type 0x2 drive 0x0 partition 0xffffffff
[SERVICE: 0xDB8,09:17:11 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0x52C,09:17:11 INFO] [MACHINE 1 INPUT #1] - (HDW) Volume Mount
[SERVICE: 0x52C,09:17:11 INFO] [MACHINE 1 TRANSITION] - {Connected} ==> {Mounted}
[SERVICE: 0xDB8,09:17:11 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0xDB8,09:17:11 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0x52C,09:17:11 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x52C,09:17:11 INFO] [MACHINE 1 ACTIONS] - {Mounted}
[SERVICE: 0x52C,09:17:11 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x52C,09:17:11 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x52C,09:17:14 ERROR] Did not find first letter of stage
[SERVICE: 0x52C,09:17:15 INFO] [1] OS says filesystem is FAT32
[SERVICE: 0x52C,09:17:16 INFO] [1] ===== iPod Touch Wheel =====
[SERVICE: 0x52C,09:17:16 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x52C,09:17:16 INFO] 9:17:16, year 2006, day of yr. 321, GMT offset 0 isDST 0
[SERVICE: 0x52C,09:17:16 INFO] [1] progress is now 0
[SERVICE: 0x52C,09:17:18 INFO] [1] *** MOUNTED - Sending event out, device session 0.
[SERVICE: 0x52C,09:17:18 INFO] [1] Auto-launch iTunes DISABLED
[SERVICE: 0x4EC,09:17:18 INFO] [MACHINE 1 INPUT #2] - (HDW) Volume Mount
[SERVICE: 0x4EC,09:17:18 INFO] ** CItunesDevice::HandleHardwareInput()
[SERVICE: 0x4F0,09:18:21 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:18:21 INFO] [1] input #3 from src #0
[SERVICE: 0xD24,09:18:21 INFO] [1] input #3
[SERVICE: 0x4F0,09:18:21 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:18:21 INFO] [1] input #4 from src #0
[SERVICE: 0x4EC,09:18:21 INFO] [1] input #4
[SERVICE: 0x4F0,09:18:21 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:18:21 INFO] [1] input #5 from src #0
[SERVICE: 0x52C,09:18:21 INFO] [1] input #5
[SERVICE: 0xD24,09:18:22 INFO] [MACHINE 1 INPUT #3] - (HDW) CheckDevNode
[SERVICE: 0xD24,09:18:23 INFO] Connection Detection Status - 0x1806002, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xD24,09:18:23 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0xD24,09:18:23 INFO] [1] progress is now 1
[SERVICE: 0x4EC,09:18:23 INFO] [MACHINE 1 INPUT #4] - (HDW) CheckDevNode
[SERVICE: 0xD24,09:18:24 INFO] [MACHINE 1 TRANSITION] - {Mounted} ==> {Unknown}
[SERVICE: 0x4EC,09:18:24 INFO] Connection Detection Status - 0x1806002, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x4EC,09:18:24 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0x52C,09:18:24 INFO] [MACHINE 1 INPUT #5] - (HDW) CheckDevNode
[SERVICE: 0xD24,09:18:24 INFO] [MACHINE 1 ACTIONS] - {Unknown}
[SERVICE: 0x52C,09:18:24 INFO] Connection Detection Status - 0x1806400, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x52C,09:18:24 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0xD24,09:18:24 INFO] Connection Detection Status - 0x1806400, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xD24,09:18:24 INFO] [1] *** DISCONNECTED - Sending event out, device session 0.
[SERVICE: 0xD24,09:18:24 INFO] [1] progress is now 0
[SERVICE: 0xD24,09:18:24 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0x4F0,09:18:38 INFO] [VolumeRemoved] existing mask 0x10, arrive mask 0x10
[SERVICE: 0x4F0,09:18:38 INFO] [1] value = 1
[SERVICE: 0x4F0,09:18:38 INFO] [1] input #6 from src #0
[SERVICE: 0x4EC,09:18:38 INFO] [1] input #6
[SERVICE: 0x4EC,09:18:38 INFO] [MACHINE 1 INPUT #6] - (HDW) Volume Unmount
[SERVICE: 0x4EC,09:18:38 INFO] [1] progress is now 3
[SERVICE: 0x4EC,09:18:38 INFO] [1] Setting progress to 3
[SERVICE: 0x4EC,09:18:38 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0x4F0,09:18:38 INFO] [InterfaceRemoved]
[SERVICE: 0x4F0,09:18:38 INFO] [1] value = 0
[SERVICE: 0x4F0,09:18:38 INFO] removed device number 1 from m_objDeviceNumberMap
[SERVICE: 0x4F0,09:18:38 INFO] [1] input #7 from src #0
[SERVICE: 0x52C,09:18:38 INFO] [1] input #7
[SERVICE: 0x4F0,09:18:38 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:18:38 INFO] [1] Progress state is 3, Waiting to disconnect = 0
[SERVICE: 0x4F0,09:18:38 ERROR] device number 0 exists, but isn't in m_objDeviceNumberMap!
[SERVICE: 0x4F0,09:18:38 INFO] removed device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" from m_vctDeviceInterfaces
[SERVICE: 0x4F0,09:18:38 INFO] [1] input #8 from src #0
[SERVICE: 0xD24,09:18:38 INFO] [1] input #8
[SERVICE: 0x52C,09:18:38 INFO] [MACHINE 1 INPUT #7] - (HDW) Interface Removal
[SERVICE: 0x52C,09:18:38 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0xD24,09:18:38 INFO] [MACHINE 1 INPUT #8] - (HDW) CheckDevNode
[SERVICE: 0xD24,09:18:38 INFO] Connection Detection Status - 0x1806400, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xD24,09:18:38 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0x4F0,09:18:39 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:18:39 INFO] [1] input #9 from src #0
[SERVICE: 0x4EC,09:18:39 INFO] [1] input #9
[SERVICE: 0x4EC,09:18:39 INFO] [MACHINE 1 INPUT #9] - (HDW) CheckDevNode
[SERVICE: 0x4EC,09:18:39 INFO] Connection Detection Status - 0x1806400, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x4EC,09:18:39 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0x4F0,09:18:48 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:18:48 INFO] [1] input #10 from src #0
[SERVICE: 0x52C,09:18:48 INFO] [1] input #10
[SERVICE: 0x4F0,09:18:48 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:18:48 INFO] [1] input #11 from src #0
[SERVICE: 0xD24,09:18:48 INFO] [1] input #11
[SERVICE: 0x52C,09:18:49 INFO] [MACHINE 1 INPUT #10] - (HDW) CheckDevNode
[SERVICE: 0x52C,09:18:49 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0xD24,09:18:49 INFO] [MACHINE 1 INPUT #11] - (HDW) CheckDevNode
[SERVICE: 0xD24,09:18:49 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0x4F0,09:34:58 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:34:58 INFO] [1] input #12 from src #0
[SERVICE: 0x4EC,09:34:59 INFO] [1] input #12
[SERVICE: 0x4EC,09:34:59 INFO] [MACHINE 1 INPUT #12] - (HDW) CheckDevNode
[SERVICE: 0x4EC,09:35:00 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0x4F0,09:39:01 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:39:01 INFO] [1] input #13 from src #0
[SERVICE: 0x52C,09:39:01 INFO] [1] input #13
[SERVICE: 0x52C,09:39:02 INFO] [MACHINE 1 INPUT #13] - (HDW) CheckDevNode
[SERVICE: 0x52C,09:39:02 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0x4F0,09:39:02 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:39:02 INFO] [1] input #14 from src #0
[SERVICE: 0xD24,09:39:02 INFO] [1] input #14
[SERVICE: 0xD24,09:39:02 INFO] [MACHINE 1 INPUT #14] - (HDW) CheckDevNode
[SERVICE: 0xD24,09:39:02 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0x4F0,09:42:41 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:42:41 INFO] [1] input #15 from src #0
[SERVICE: 0x4F0,09:42:41 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:42:41 INFO] [1] input #16 from src #0
[SERVICE: 0x4F0,09:42:41 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:42:41 INFO] [1] input #17 from src #0
[SERVICE: 0x52C,09:42:41 INFO] [1] input #15
[SERVICE: 0x4EC,09:42:41 INFO] [1] input #16
[SERVICE: 0xD24,09:42:41 INFO] [1] input #17
[SERVICE: 0x52C,09:42:41 INFO] [MACHINE 1 INPUT #15] - (HDW) CheckDevNode
[SERVICE: 0x52C,09:42:49 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x4EC,09:42:49 INFO] [MACHINE 1 INPUT #16] - (HDW) CheckDevNode
[SERVICE: 0x4EC,09:42:49 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xD24,09:42:49 INFO] [MACHINE 1 INPUT #17] - (HDW) CheckDevNode
[SERVICE: 0xD24,09:42:49 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x4F0,09:42:51 INFO] [InterfaceArrival] \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x4F0,09:42:51 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0x4F0,09:42:51 INFO] [1] set waiting to mount = 1
[SERVICE: 0x4F0,09:42:51 INFO] [1] Attempt to reassign from session 0 to session 0, DENIED!
[SERVICE: 0x4F0,09:42:51 INFO] [1] added device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_objDeviceNameMap
[SERVICE: 0x4F0,09:42:51 INFO] [1] added state machine 1 to m_objDeviceIdMap
[SERVICE: 0x4F0,09:42:51 INFO] [1] added device number 1 to m_objDeviceNumberMap
[SERVICE: 0x4F0,09:42:51 INFO] [1] added device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_vctDeviceInterfaces
[SERVICE: 0x4F0,09:42:51 INFO] [1] input #18 from src #0
[SERVICE: 0x52C,09:42:51 INFO] [1] input #18
[SERVICE: 0x4F0,09:42:51 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:42:51 INFO] [1] input #19 from src #0
[SERVICE: 0x4EC,09:42:51 INFO] [1] input #19
[SERVICE: 0x4F0,09:42:51 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:42:51 INFO] [1] input #20 from src #0
[SERVICE: 0xD24,09:42:51 INFO] [1] input #20
[SERVICE: 0x52C,09:42:51 INFO] [MACHINE 1 INPUT #18] - (HDW) Interface Arrival
[SERVICE: 0x52C,09:42:51 INFO] [1] progress state is 2, Waiting to mount = 1
[SERVICE: 0x52C,09:42:51 INFO] [1] progress is now 2
[SERVICE: 0x52C,09:42:51 INFO] [1] progress is now 2
[SERVICE: 0x52C,09:42:51 INFO] [MACHINE 1 TRANSITION] - {Unknown} ==> {Connected}
[SERVICE: 0x52C,09:42:51 INFO] [MACHINE 1 ACTIONS] - {Connected}
[SERVICE: 0x52C,09:42:51 INFO] [1] SCSI Inquiry attempt #0
[SERVICE: 0x52C,09:42:51 INFO] VendorId: Apple
[SERVICE: 0x52C,09:42:51 INFO] ProductId: iPod
[SERVICE: 0x52C,09:42:51 INFO] revision: 1.62
[SERVICE: 0x52C,09:42:51 INFO] vendor bytes:
[SERVICE: 0x52C,09:42:51 INFO] 02 01 00 00 00 00 00 00 00 05 00 13 12 00 00 00 00 00 00 00
[SERVICE: 0x52C,09:42:51 INFO] [1] firmware version: 1.62 (0x13E)
[SERVICE: 0x52C,09:42:51 INFO] [1] Power State: Not Powered
[SERVICE: 0x52C,09:42:51 INFO] [1] Checkpoint attempt #0
[SERVICE: 0x52C,09:42:51 ERROR] Did not find first letter of stage
[SERVICE: 0x52C,09:42:51 INFO] [1] serial number 000A270002BF5F21
[SERVICE: 0x52C,09:42:51 INFO] [1] *** CONNECTED - Sending event out, device session 0.
[SERVICE: 0x4EC,09:42:51 INFO] [MACHINE 1 INPUT #19] - (HDW) CheckDevNode
[SERVICE: 0x4EC,09:42:51 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xD24,09:42:51 INFO] [MACHINE 1 INPUT #20] - (HDW) CheckDevNode
[SERVICE: 0xD24,09:42:51 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x4F0,09:42:53 INFO] [SIMULATED VOLUME ARRIVAL] generating volume mount for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x4F0,09:42:53 INFO] [VolumeArrive] mask = 0x1C
[SERVICE: 0x4F0,09:42:53 INFO] looking up device # for \\.\E:
[SERVICE: 0x4F0,09:42:53 INFO] type 0x7 drive 0x1 partition 0x1
[SERVICE: 0x4F0,09:42:53 INFO] iTunes device #1 found with drive letter E, mask 0x10
[SERVICE: 0x4F0,09:42:53 INFO] [1] set waiting to mount = 0
[SERVICE: 0x4F0,09:42:53 INFO] [1] input #21 from src #0
[SERVICE: 0x52C,09:42:53 INFO] [1] input #21
[SERVICE: 0x4F0,09:42:53 INFO] looking up device # for \\.\D:
[SERVICE: 0x4F0,09:42:53 INFO] type 0x2 drive 0x0 partition 0xffffffff
[SERVICE: 0x4F0,09:42:53 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0x4F0,09:42:53 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x4F0,09:42:53 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0x52C,09:42:54 INFO] [MACHINE 1 INPUT #21] - (HDW) Volume Mount
[SERVICE: 0x52C,09:42:54 INFO] [MACHINE 1 TRANSITION] - {Connected} ==> {Mounted}
[SERVICE: 0x52C,09:42:54 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x52C,09:42:54 INFO] [MACHINE 1 ACTIONS] - {Mounted}
[SERVICE: 0x52C,09:42:54 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x52C,09:42:54 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x52C,09:42:54 ERROR] Did not find first letter of stage
[SERVICE: 0x52C,09:43:02 INFO] [1] OS says filesystem is FAT32
[SERVICE: 0x52C,09:43:03 INFO] [1] ===== iPod Touch Wheel =====
[SERVICE: 0x52C,09:43:03 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x52C,09:43:03 INFO] 9:43:3, year 2006, day of yr. 321, GMT offset 0 isDST 0
[SERVICE: 0x52C,09:43:03 INFO] [1] progress is now 0
[SERVICE: 0x52C,09:43:04 INFO] [1] *** MOUNTED - Sending event out, device session 0.
[SERVICE: 0x52C,09:43:04 INFO] [1] Auto-launch iTunes DISABLED
[SERVICE: 0x4F0,09:43:11 INFO] [VolumeArrive] mask = 0x10
[SERVICE: 0x4F0,09:43:11 INFO] looking up device # for \\.\E:
[SERVICE: 0x4F0,09:43:11 INFO] type 0x7 drive 0x1 partition 0x1
[SERVICE: 0x4F0,09:43:11 INFO] iTunes device #1 found with drive letter E, mask 0x10
[SERVICE: 0x4F0,09:43:11 INFO] [1] set waiting to mount = 0
[SERVICE: 0x4F0,09:43:11 INFO] [1] input #22 from src #0
[SERVICE: 0x4EC,09:43:11 INFO] [1] input #22
[SERVICE: 0x4EC,09:43:11 INFO] [MACHINE 1 INPUT #22] - (HDW) Volume Mount
[SERVICE: 0x4EC,09:43:11 INFO] ** CItunesDevice::HandleHardwareInput()
[SERVICE: 0x4F0,09:43:11 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:43:11 INFO] [1] input #23 from src #0
[SERVICE: 0xD24,09:43:11 INFO] [1] input #23
[SERVICE: 0xD24,09:43:12 INFO] [MACHINE 1 INPUT #23] - (HDW) CheckDevNode
[SERVICE: 0xD24,09:43:12 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xF90,09:43:16 INFO] <0x4> Got Serial #
[SERVICE: 0x200,09:43:16 INFO] <0x4> GetFormatType() returned unknown format 0
[SERVICE: 0x200,09:43:16 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x200,09:43:16 INFO] Mounted
[SERVICE: 0x200,09:43:16 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0x200,09:43:16 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0xF90,09:43:16 INFO] Mounted
[SERVICE: 0xF90,09:43:16 INFO] [1] already mounted!
[SERVICE: 0xF90,09:43:16 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0x200,09:43:33 INFO] <0x4> GetFormatType() returned unknown format 0
[SERVICE: 0xD10,09:43:33 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xD10,09:43:33 INFO] Mounted
[SERVICE: 0xD10,09:43:33 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xD10,09:43:33 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0xF90,09:43:33 INFO] <0x4> COM request for device 1 drive letter - E
[SERVICE: 0xD10,09:43:34 INFO] Mounted
[SERVICE: 0xD10,09:43:34 INFO] Device 0 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xD10,09:43:34 INFO] Device 0 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0xF90,09:43:54 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xF90,09:43:54 INFO] Mounted
[SERVICE: 0xF90,09:43:54 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xF90,09:43:54 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x200,09:43:54 INFO] Mounted
[SERVICE: 0x200,09:43:54 INFO] [1] already mounted!
[SERVICE: 0x200,09:43:54 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0xD10,09:43:54 INFO] Mounted
[SERVICE: 0xD10,09:43:54 INFO] Device 0 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xD10,09:43:54 INFO] Device 0 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0xF90,09:43:54 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xF90,09:43:54 INFO] Mounted
[SERVICE: 0xF90,09:43:54 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xF90,09:43:54 INFO] Device 1 not in intermediate state. It appears to be truly mounted.If anyone is interested I managed to solve this problem by reformatting the ipod as a mac ipod, with the help of friends system. This does get rid of the music but as I had it backed up wasn't a problem. I then plugged the mac Ipod back into a windows pc and reformatted it as a windows ipod which updated the firmware correctly and have'nt had a problem since.
-
My Macbook Pro keyboard and USB keyboard will not work. However, the trackpad and USB mouse will work. Any help?
This is quite frustrating, since it randomly occured as I was browsing the web. It seemed to happen out of nowhere. I cannot login to my user account because I cannot type my password.
Any help will be appreciated.
-MattIf you have another Mac, boot the non-working one into Target Disk Mode (holding down "T" at startup). Hook up the two Macs via a Firewire cable. The non-working one will mount on the other Mac as an external Firewire HD.
Next, download the 10.5.6 Combo update from here:
http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1056comboupdate .html
Run it. When it asks you for a destination, choose the other Mac that was mounted via Firewire. When it's done, unmount the computer and restart it. The keyboard and mouse should work now. -
Macbook restarts after going to sleep when not plugged into mains
Hi all,
I've a mid-2012 Macbook Pro running Yosemite (10.10.3), 2.5GHz i5 and have just recently upgraded it to 16GB RAM (and I'm wondering if that's the problem).
The post title says it all really - if I let the computer go to sleep when it's not plugged into the mains, when I wake it up by pressing a key it restarts. Battery life is not a factor in this - I can have lots of juice left but the same thing will happen.
Once rebooted, I get the 'Your computer restarted because of a problem' window with the following text; I'm hoping someone smarter than me might be able to spot something in this that will help resolve the problem.
Any thoughts appreciated. Many thanks in advance.
tim
Anonymous UUID:
CABA6372-AF3C-DB63-3D27-0422ED36F895
Fri Apr 10 20:26:57 2015
*** Panic Report ***
panic(cpu 0 caller 0xffffff8002217cc2): Kernel trap at 0xffffff800232b4e8, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x00000000092e0028, CR3: 0x000000000317c001, CR4: 0x00000000001626e0
RAX: 0x00000000002e0000, RBX: 0xffffff81e1a47da0, RCX: 0x00000000092e0000, RDX: 0xffffff801fb7f4e0
RSP: 0xffffff81ea5dbca8, RBP: 0xffffff81ea5dbd50, RSI: 0xffffff80028f38e0, RDI: 0xffffff81e1702500
R8: 0x0000000000000000, R9: 0x0000000000000001, R10: 0x000000000000000b, R11: 0x000000000000000b
R12: 0xffffff81e1702500, R13: 0xffffff8201a0f000, R14: 0x0000000000000001, R15: 0xffffff8020572dc0
RFL: 0x0000000000010206, RIP: 0xffffff800232b4e8, CS: 0x0000000000000008, SS: 0x0000000000000000
Fault CR2: 0x00000000092e0028, Error code: 0x0000000000000002, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff81ea5db950 : 0xffffff800212bda1
0xffffff81ea5db9d0 : 0xffffff8002217cc2
0xffffff81ea5dbb90 : 0xffffff8002234b73
0xffffff81ea5dbbb0 : 0xffffff800232b4e8
0xffffff81ea5dbd50 : 0xffffff8002377b34
0xffffff81ea5dbda0 : 0xffffff800255e5a1
0xffffff81ea5dbdd0 : 0xffffff800255559f
0xffffff81ea5dbeb0 : 0xffffff800235879b
0xffffff81ea5dbed0 : 0xffffff8002342e24
0xffffff81ea5dbf40 : 0xffffff800234d027
0xffffff81ea5dbf50 : 0xffffff800264ba86
0xffffff81ea5dbfb0 : 0xffffff8002235376
BSD process name corresponding to current thread: launchd
Mac OS version:
14D131
Kernel version:
Darwin Kernel Version 14.3.0: Mon Mar 23 11:59:05 PDT 2015; root:xnu-2782.20.48~5/RELEASE_X86_64
Kernel UUID: 4B3A11F4-77AA-3D27-A22D-81A1BC5B504D
Kernel slide:
0x0000000001e00000
Kernel text base: 0xffffff8002000000
__HIB text base: 0xffffff8001f00000
System model name: MacBookPro9,2 (Mac-6F01561E16C75D06)
System uptime in nanoseconds: 109860300807373
last loaded kext at 105799869432469: com.apple.filesystems.smbfs 3.0.1 (addr 0xffffff7f84a91000, size 389120)
last unloaded kext at 356418188620: com.apple.driver.AirPort.Brcm4331 800.20.24 (addr 0xffffff7f83da5000, size 2043904)
loaded kexts:
com.trusteer.driver.gakl_driver_2 1
com.Cycling74.driver.Soundflower 1.6.5
com.avg.Antivirus.OnAccess.kext 2015.0
at.obdev.nke.LittleSnitch 4216
com.apple.filesystems.smbfs 3.0.1
com.apple.filesystems.udf 2.5
com.apple.driver.AGPM 110.19.5
com.apple.driver.X86PlatformShim 1.0.0
com.apple.driver.AudioAUUC 1.70
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.iokit.IOBluetoothSerialManager 4.3.4f4
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleHV 1
com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.driver.AppleHDA 272.18
com.apple.driver.AppleMikeyDriver 272.18
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.4f4
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleBacklight 170.7.4
com.apple.driver.AppleMCCSControl 1.2.11
com.apple.driver.AppleSMCLMU 2.0.7d0
com.apple.driver.AppleThunderboltIP 2.0.2
com.apple.driver.AppleIntelHD4000Graphics 10.0.6
com.apple.driver.AppleIntelFramebufferCapri 10.0.6
com.apple.driver.AppleLPC 1.7.3
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleIRController 327.5
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 36
com.apple.iokit.SCSITaskUserClient 3.7.5
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.7.1
com.apple.driver.AppleUSBHub 705.4.2
com.apple.driver.AirPort.Brcm4360 930.37.3
com.apple.iokit.AppleBCM5701Ethernet 10.1.3
com.apple.driver.AppleFWOHCI 5.5.2
com.apple.driver.AppleAHCIPort 3.1.2
com.apple.driver.AppleSDXC 1.6.5
com.apple.driver.AppleUSBEHCI 705.4.14
com.apple.driver.AppleUSBXHCI 710.4.11
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0
com.apple.nke.applicationfirewall 161
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 218.0.0
com.apple.iokit.IOSerialFamily 11
com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 272.18
com.apple.kext.OSvKernDSPLib 1.15
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.4f4
com.apple.iokit.IOBluetoothFamily 4.3.4f4
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleHDAController 272.18
com.apple.iokit.IOHDAFamily 272.18
com.apple.iokit.IOAudioFamily 203.3
com.apple.vecLib.kext 1.2.0
com.apple.iokit.IOUSBUserClient 705.4.0
com.apple.driver.AppleSMBusController 1.0.13d1
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.iokit.IOSurface 97.4
com.apple.iokit.IOAcceleratorFamily2 156.14
com.apple.AppleGraphicsDeviceControl 3.10.22
com.apple.driver.AppleBacklightExpert 1.1.0
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.IOPlatformPluginFamily 5.9.1d7
com.apple.driver.AppleSMC 3.1.9
com.apple.driver.AppleUSBMultitouch 245.2
com.apple.iokit.IOUSBHIDDriver 705.4.0
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.driver.CoreStorage 471.20.7
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.5
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.5
com.apple.driver.AppleThunderboltDPInAdapter 4.0.6
com.apple.driver.AppleThunderboltDPAdapterFamily 4.0.6
com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2
com.apple.driver.AppleThunderboltNHI 3.1.7
com.apple.iokit.IOThunderboltFamily 4.2.2
com.apple.iokit.IO80211Family 730.60
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOFireWireFamily 4.5.6
com.apple.iokit.IOAHCIFamily 2.7.5
com.apple.iokit.IOUSBFamily 720.4.4
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 396
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.pthread 1
com.apple.kec.corecrypto 1.0
com.apple.kec.Libm 1
Unable to gather system configuration information.Model: MacBookPro9,2, BootROM MBP91.00D3.B08, 2 processors, Intel Core i5, 2.5 GHz, 16 GB, SMC 2.2f44
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x859B, 0x43543130323436344246313630422E433136
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x859B, 0x43543130323436344246313630422E433136
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (7.15.166.24.3)
Bluetooth: Version 4.3.4f4 15601, 3 services, 18 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: APPLE HDD HTS547550A9E384, 500.11 GB
Serial ATA Device: HL-DT-ST DVDRW GS31N
USB Device: Hub
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: Hub
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
USB Device: IR Receiver
Thunderbolt Bus: MacBook Pro, Apple Inc., 25.1Hey Tim,
It sounds like your MacBook Pro is spontaneously restarting, and you wonder if it’s because you recently added memory to the notebook. Take a look at the article linked below which provides a lot of great information about “kernel panics” and specific troubleshooting related to RAM.
OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem." - Apple Support
Ciao,
-Jason
Maybe you are looking for
-
Can't get rid of my high power consumption (Thinkpad X60 Tablet)
This is really driving me nuts. On Windows 7, I can achieve a power consumption of around 11-12W (with moderate web surfing usage over WLAN and full screen brightness, just Aero turned off). On Arch, I can't get below 13W *ever* with full screen brig
-
How to make iPhoto ask before merging events?
iphoto used to ask me if I was sure that I wanted events merged. One day, I checked the box that says "Don't ask me again". I shouldn't have done that!!! Now my little brother can mix and merge all my events - easily!!! How do I get iphoto to ask me
-
How to set date column to current date by default in form
Hi, I have some forms in which users need to enter todays date..Is there any way I can set this filed to current date to avoid errors inc ase users dont enter the date. Shravanthi
-
Error Message launching lightroom 3
Help! I had a trail of an earlier version of lightroom. I had to purchase 3.4.1 for my son for school. while waiting for approval, i downloaded trail version of 3.4.1. When it opened up, it contained pictures that are no longer on the computer, I tri
-
Dear Experts I have a problem with two programs. S_BCE_68002111: Here I can define critical autorizations. For example S_TCODE = AL11. RSUSR002: Complex selction criteria I custo S_BCE_68002111 and y generate critical autorization with S_TCODE and AL