USB camera endoscope

just purchased a USB borescope that was advertised as compatable with windows or MAC. It will not work with my MacBook Pro mid 2010 running Mountain Lion. Any one know wh has software that will work?

found the answer.....
PHOTOBOOTH !

Similar Messages

  • How to capture an image from my usb camera and display on my front panel

    How to capture an image from my usb camera and display on my front panel

    Install NI Vision Acquisition Software and NI IMAQ for USB and open an example.
    Christian

  • How to get source code for WinCE 6.0 USB Camera Driver for ARM4I Processor

    Hi,
    I am implementing USB camera driver for my mini2440 board which has an ARM4I processor. The sample code
    "Windows Embedded CE 6.0 USB camera Driver" downloaded from:
    http://www.microsoft.com/downloads/en/details.aspx?FamilyID=2ef087c0-a4ae-42cc-abd0-c466787c11f2
    does not support ARM4I processors. When trying to generate in VS2005 Platform Builder my WinCE 6.0
    image for mini2440 with the Third party catalog items "MJPEG Decompression Filter" and "USB CameraDriver",
    the linker giver errors. Please advise where to find a working source code for USB (now revision 1.1
    ("full-speed") is supported in my WinCE 6.0 image) camera for my ARM4I processor. The code should 
    be in C# but C++ will be fine also.
    Thanks,
       Paul

    i get this on the hyperterminal when i run the cameradshowapp.exe
    Compulab Windows CE NAND X-Loader for CM-T35                                           
    Built Dec 20 2009 at 16:48:16                            
    Version 1.01.222               
    Commit Date 16/12/09                   
    Jumping to bootloader                    
    Microsoft Windows CE Bootloader Common Library Version 1.4 Built Dec 20 2009 16:                                                                               
    46:16    
    INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0x200b                                                    
    Texas Instruments Windows CE EBOOT for CM-T35, Built Dec 20 2009 at 16:48:10                                                                           
    Version 1.01.222               
    OMAP3430 Version 0x4b7ae02f (Unknown)                                    
    TPS659XX Version 0x10 (ES2.x)                            
    -OEMPinMuxSetup....                  
    System ready!            
    Preparing for download...                        
    INFO: Predownload               
    +FMD_Init        
    Checking bootloader blocks are marked as reserved (Num = 6)                                                          
    +FMD_Init        
    WARN: Boot config wasn't found, using defaults                                             
    +FMD_Init        
    OALFlashStoreOpen: 4096 blocks, 64 sectors/block                                               
    OALFlashStoreOpen: 2048 bytes/sector, 14 reserved blocks                                                       
    Calling LCD_TurnOn                 
    +FMD_Init        
    +FMD_Init        
    BLConfigureFlashPartitions: dwBootPartitionSectorCount = 0x5fff, partition actua                                                                               
    l size =0x4d3a!!!                
    Hit space to enter configuration menu 5...                                         
    Hit space to enter configuration menu 4...                                         
    Hit space to enter configuration menu 3...                                         
    Hit space to enter configuration menu 2...                                         
    Hit space to enter configuration menu 1...                                         
    INFO: Boot Device location = 0x8000020                                     
    Load NK image from flash memory                              
    +FMD_Init        
    ROMHDR (pTOC = 0x823b8c28) ---------------------                                               
      DLL First           : 0x4001c001                                 
      DLL Last            : 0x41c7c0d8                                 
      Physical First      : 0x84001000                                 
      Physical Last       : 0x863bbdec                                 
      Num Modules         :        294                                 
      RAM Start           : 0x863c0000                                 
      RAM Free            : 0x863d5000                                 
      RAM End             : 0x90800000                                 
      Num Copy Entries                        
      Copy Entries Offset : 0x85256e38                                 
      Prof Symbol Length  : 0x00000000                                 
      Prof Symbol Offset  : 0x00000000                                 
      Num Files           :        116                                 
      Kernel Flags        : 0x00000002                                 
      FileSys RAM Percent : 0x00000020                                 
      Driver Glob Start   : 0x00000000                                 
      Driver Glob Length  : 0x00000000                                 
      CPU                 :     0x01c2                                 
      MiscFlags           :     0x0002                                 
      Extensions          : 0x84002020                                 
      Tracking Mem Start  : 0x00000000                                 
      Tracking Mem Length : 0x00000000                                 
    NK Image Loaded            
    Launch Windows CE image by jumping to 0x80001000...                                                  
    Windows CE Kernel for ARM (Thumb Enabled) Built on Apr  5 2011 at 17:47:22                                                                         
    +OEMInit       
    ýSETDATAOUT access is OK....                           
    Forcing clean boot                 
    MainMemoryEndAddress = 0x90800000                                
    -OEMInit       
    +FMD_Init        
    Dumping registry defined VK                          
    Row 0:  0x18    0x9     0x25    0x0     0x0     0x0                                                  
    Row 1:  0x26    0xd     0x28    0x0     0x0     0x0                                                  
    Row 2:  0x27    0x24    0x23    0x0     0x0     0x0                                                  
    Row 3:  0x0     0x0     0x0     0x0     0x0     0x0                                                  
    Row 4:  0x0     0x0     0x0     0x0     0x0                                             
    Row 5:  0x0     0x0     0x0     0x0     0x0     0x0                                                  
    SMSC922x: Core Ethernet Init.                            
    Lan9220 identified. ID_REV = 0x92200000                                      
    SMSC922x: MAC address = 00:01:c0:0a:a0:db                                        
    Lan9220 identified. ID_REV = 0x92200000                                      
    SMSC922x: MAC address = 00:01:c0:09:88:80                                        
    SDIO8686: Loading Driver [version = 38.p44]                                          
    SDIO8686: Reset with TPS GPIO 2 --> done                                       
    !!!Kernel mode PSL 'PRdr' de-registered!!!                                         
    !!!Kernel mode PSL 'HRdr' de-registered!!!                                         
    !!!Kernel mode PSL 'FRdr' de-registered!!!                                         
    EHCI USB Host: HcdPdd_Init+                          
    [OTG] OMAPMHSUSBOTG::Init()+                           
    OMAPMHSUSBOTG::PostInit(): Start.                                
    DSPLINK Module (1.61.04) created on Date: Jun 24 2009 Time: 16:30:52                                                                   
    Display parameters:                  
            Height = 0x280                     
            Width = 0x1e0
            HSW = 0x20
            HFP = 0x8
            HBP = 0x17
            VSW = 0x1
            VFP = 0x4
            VBP = 0x3
            DVI is not enabled
            PixelClkDiv = 0x7
            LogClkDiv = 0x1
            ClkSelDSS = 0x5
    TD035:: LCDTurnOn
    TD035STEE1: Turned display on.
    TD035:: Finished LCD VGA init
    AUTOLAUNCH: Checking HKEY_LOCAL_MACHINE\Startup key for programs to run.
    Can't open HKEY_LOCAL_MACHINE\Startup key.
    [WiFi]: Firmware Version: 9.70.3.23
    CCaptureFramework: Failed setting up the camera data.
    CameraDShowApp: Initializing the camera driver list failed.CameraDShowApp: Retri
    eving the driver list failed.CameraDShowApp: Selecting the camera device failed.
    CameraDShowApp: Selecting the camera device failed.CameraDShowApp: Selecting the
     camera device failed.CameraDShowApp: Selecting the camera device failed.CCaptur
    eFramework: Retrieving the still stream config failed.
    CameraDShowApp: Initializing the capture graph failed.

  • Can I use a USB camera to import directly live footage into imovie as opposed to firewire?

    Hi!
    I use iMovie to directly import live footage from my camcorder.
    I've been using old Mini DV cameras to do this but this technology is being outdated with camera manufacturers now all moving to USB.
    Can I use a USB camera to take live footage directly into iMovie just the same was as i've been doing with the firewire connection via the old Mini DV camcorders.
    Alternatively, are there any firewire camera's that any could reccomend?
    Any help or suggestions would be greatly appreciated.
    Chris.

    No, you cannot import in real time from USB. These USB camcorders will import faster than real time or slower than real time, depending on the speed of your computer.
    If you need to import in real time, there are some USB webcams out there that are used mainly for video chats and the like that might work. You may find an HD model.You can also do this with your built in iSight camera.
    With a real HD video camcorder, you will need to import it after you shoot.

  • HT4101 The Lightning to USB Camera Adapter doesn't work

    I just bought the Lightning to USB Camera Adapter but it doesn't work and show the message: it is not an authorised accessories..may not work reliabily

    the adapter doesnt work with ios 7 on a lot of new devices, so untill apple fixes the issue, here is a workaround http://www.youtube.com/watch?v=pE28JwxQ3Zc

  • How can I use a USB camera with cRIO 9022. Please see my strange problem.

    Hi,
            I would like to use a USB camera with NI cRIO 9022. I used the same USB camera with NI USB 6216 DAQ device and developed a VI(within a PROJECT and outside it). So, It is working fine with NI USB 6216 device when I use the Vision Assistant Express VI and gets detected in its Initialization Window.  Please see JPEG File 3 where I get NO ERROR.
            I am facing a problem when I want to use it with NI cRIO 9022. What exactly I am doing in this case is:
    1) Create a NEW PROJECT
    2) Add Targets and Devices(NI cRIO 9022)
    3) Use the Scan Interface mode
    4) Create a NEW VI under the cRIO 9022 device 
    5) Use a Timed Loop(Synchronized with Scan Engine) for continuous Data Acquisition and Sending from the Analog I/O modules.
    6) Use the Vision Assistant available through the NI Vision Acquisition 2010 Module(I get STUCK HERE! The Express VI opens the Initialization Window, but I don't see the USB camera like in JPEG File 3)
    I am facing difficulties with this HOST COMPUTER, cRIO implementation differences. On my host computer I have the software packages as shown in JPEG File 1, and on my cRIO 9022 as shown in JPEG File 2.
    Can someone guide me how to overcome this and get the USB camera detected when I am using NI cRIO 9022?
    NOTE: If this is a problem with software mismatches on HOST and NI cRIO 9022 device, please see JPEG Files 1 and 2 for available software and Host and cRIO 9022.
    Thanks.
    Amar.
    Attachments:
    NI Vision Acquisition Express Error for NI cRIO 9022.JPG ‏39 KB
    IMAQ and dx Modules Installed on my NI cRIO 9022 hardware(No NI Vision Acquisition 2010 SP1).JPG ‏82 KB
    NI Vision Acquisition Express NO Error for NI cRIO 9022.JPG ‏48 KB

    Only GigE comms are supported on the cRIO Real Time OS. Have a look at the following:
    Machine Vision on NI CompactRIO and Single-Board RIO
    Adnan Zafar
    Certified LabVIEW Architect
    Coleman Technologies

  • I have a new iPad Air. Can I use plug in USB camera reader to have a load of movies etc on an external hard drive and then plug and play so to speak. I'm off on holiday and haven't got the capacity to have everything on that I'd like for the kids

    Can I use a plug in USB camera reader to have a load of movies etc on an external hard drive and then plug and play so to speak? I'm off on holiday and haven't got the capacity on the iPad to have everything on that I'd like for the kids.
    So basically I want a hard drive with X amount of films etc on. Can I then watch them on my iPad?
    Hope this makes sense.

    External HDD won't work.
    You need something like this:
    http://www.seagate.com/goflexsatellite/

  • When I was updating my ipod touch 4g 8g 4.3.3 the USB came out and now it just shows connect to itunes and when i try to update it comes with error 6. I do all of the help things and nothing

    When I was updating my ipod touch 4g 8g 4.3.3 the USB came out and now it just shows connect to itunes and when i try to update it comes with error 6. I do all of the help things and nothing happoned

    First see if placing the iPod in Recovery Mode will allow a restore.
    Next try DFU mode and restore.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    If not successful then time for an appointment at the Genius Bar of an Apple store. You are not alone with this problem.

  • Can't see pictures from Ipad in Windows Explorer (usb camera)

    When I had around 3000 pictures in my Ipad, there's no problem to delete all at once from windows using the explorer and the ipad as a usb camera. But now I have around 6000 pictures and when I try to see the pictures, windows shows two messages: 1 the usb camera is busy and the pictures can't be accesed and the second message: 0 objects in the image folder is empty (zero pictures).
    I don't understand: there's a problem with the number of pictures? Why with less pictures everything works fine? Why I can't select ALL the pictures from a event to delete ALL at once.... the instructions to select more that one picture it doesn't work for me.
    The issue with the pictures is draving me crazy! The soluction to select the pictures one by one is just "insane".
    Help Please.

    It really works!! (Thanx God)...
    I was making a mistake while pressing the first picture. There's such kind of technique in the way put both fingers at once. If one finger touch the screen first it doesn't work. it needs a little bit of pressure but not too much. Anywary after a couple of minutes of "training" I can delete many pictures with the minimal effort.
    Maybe in the future the "Select All" option will appear to solve this issue at last.
    Thanx for the help... This is a really good advice.

  • HT4101 When connecting my camera to my IPad mini via lightniing to usb camera adapter,I get "The attached accessory uses too much power" .Any solutions?

    When I connect my Ipad mini to my camera via lightning to usb camera adapter all i get is a message "The attached accessory uses too much power."Any solutions

    It depends on the camera, but some have a special mode for offloading photos but not trying to charge the camera through the USB port. For others, you may have to pull out the SD card (if that's what it uses) and use the Lightning to SD card reader instead.
    Maybe if you told us what camera you are connecting, somebody here with the same model can give you more specific information.

  • HT4101 Lightning to USB Camera Connector & the IPad 4

    When connecting the Lightning to USB Camera Connector to  the IPad 4; it is giving a MSG that the device requires too much power. Any suggestions??

    What are trying to use it with ? If a flash drive or card reader then a lot of them require more power than is supplied to the kit, though a powered reader might work. If a camera then does the camera have a menu setting on it to enable Picture Transfer Protocol (PTP or Pictbridge) or Mass Storage Device - I know that some Canon DSLRs do, I'm not sure about other makes.

  • Can you connect a usb SuperDrive if you use a lightning to usb camera adapter and a usb hub?

    I was just wondering if ypu could connect a usb SuperDrive if you use the lightning to usb camera adapter, a usb hub, and then plug the SuperDrive into the hub. Will it work to play disks, or movies, or something?

    No, drive consume too much power.
    Try using a wireless flash drive.

  • Cheapo alternative to Apple Lightning to USB Camera Adapter for audio interface?

    I am getting an audio interface (Steinberg UR44) which can be controlled with an iPad via the Apple Lightning USB Camera Adapter and a standard USB printer cable (Type A male  to type B male), but I am too cheap to buy the ridiculously overpriced Apple adapter, so I am wondering if the following will work instead:
    iPad --> Apple lighting male to USB Type A male cable (the standard charging cable) --> USB Type A female to Type B male adapter --> Audio Interface
    Other adapters are available for USB Type A female to Type B micro or mini male, so the same kind of arrangement might work for cameras.
    The adapters are five bucks or less vs. thirty for the RIDICULOUSLY OVERPRICED (yes, I know, I already said that) Apple adapter.
    I am thinking this is a better way to go than a cheap unlicensed knockoff lightning adapter, because the critical part of the connection (the lightning plug and electronics) would still be made by Apple.
    Has anyone tried the above with either an audio interface or camera?

    Because it was designed for use with the iPad. Apple makes no claim that it will work with an iPhone.

  • Original Apple Lightning to USB Camera Adapter gives warning

    I have a 4th generation iPad with iOS 7.1 and the original Apple Lightning to USB Camera Adapter bought online from the US Apple Store. Whenever I plug it in the iPad I get this warning: 'This cable or accessory is not certified and may not work reliably with this iPad.' If I close the iPad cover and leave it for a few minutes, when I unlock it and go to the Settings<General<About page the cck is listed. I tried the lightning usb adapter on an iPad with iOS 6 and it was immediately recognized. Is this a software problem or a faulty camera adapter?

    The original Camera Connection Kit uses a 30-pin connector thile the iPad 4 has a lightning connector. You mention an adapter. Are you using an original Apple-branded adapter? I have seen other posts here that say it is likely this adapter that is causing the problem.
    Using the Lightning connectors do no cause this problem.
    http://store.apple.com/us/product/MD822ZM/A/lightning-to-sd-card-camera-reader?f node=3a and
    http://store.apple.com/us/product/MD821ZM/A/lightning-to-usb-camera-adapter?fnod e=3a

  • What is the exact technical difference between "Lightning to USB Camera Adapter" and "Lightning to USB Cable"

    Mainly I am interested in attaching the iPhone to a receiver (or car etc.) to play music.
    Both the "Lightning to USB Cable" and the "Lightning to USB Camera Adapter" seem to do the trick. So what is the exact technical difference between the two items?
    When connected to a receiver, is the iPhone the USB Master in both cases? Is the USB "Audio Device Class" standard used to transmit audio?

    Thanks for all the answers! I think I should specify the use case much more clearly. Sorry for not having done this earlier.
    Use Case 1:
    When I connect the iPhone to the receiver I can use the Lightning to USB, because the receiver has a female type A, just like e.g. a PC or like the charger. So I would agree that the Receiver must be the USB host, and the iPhone the USB device. This works just fine in my case, with iPhone and iPad.
    In this case, the audio goes from the device to the host, or "Audio-in".
    Use Case 2:
    A friend of mine has a small device that converts USB to Toslink. This thing has a female Mini USB Type A, which is typically used at the receiving side of a USB connection. This device can be connected e.g. to a Mac, and then the Mac can output audio via this device to receiver which accepts optical Toslink signals.
    In this case, the audio goes from the host to the device, or "Audio-out".
    It is this use case 2 that I am unsure about:
    a) Can the Lightning to USB cable be used in this case (assuming that I find the necessary non-standard adapters to actually connect the USB ports)? This would mean that the iPhone can act as a USB host with the Lightning to USB cable.
    b) I know that the Lightning to USB Camera Adapter does convert the iPad into an USB host, otherwise it could not read data from a camera. So could this adapter also be used to produce "Audio out" to a USB device that supports receiving music?
    If yes, would this also work with an iPhone (as pointed out in another answer, the iPhone does nor support reading pictures from a camera)?

Maybe you are looking for

  • About condition for loop in BPM

    I design a loop, condition is counter<>3. It seems only receives 3 messages when I send more than 3. for example, I send 105 messages, for every 10 messages it will generate a file. and I totally have 11 files. What is the best way to end the loop?

  • Rs 232 communication

    i must read and write data and command from a custom card with a labview vi. can someone send me documentation or example of serial communication protocol that can be implemented in labview? thanks. david

  • Mass Contract Update - Item price become zero after Tax Code change

    HI Guru, I have issue on the contract net price which become zero after change in Tax code of item. Took the opportunity to update contracts to reflect the changing VAT code (from V0 to V1 for some items) from the Trx code: MEMASSCONTRACT. However, h

  • Db_associate fails with : Lock table is out of available lock entries

    Hi Occasionally on startup my app needs to rebuild its secondary database, so I call db_associate with DB_CREATE set. If the primary db is large the associate fails with "Lock table is out of available lock entries". Both databases are hashes, so I h

  • Where did the files get installed on OS 10.7.2?

    The install appeared to have gone smoothly and I got the Install Successful message at the end, but I can't find Lightroom 4 Beta in my appllications list and don't see anything on my drive? Here are the messages out of the console: 1/12/12 8:53:48.2