USB camera not showing up in drive window.

My USB connected Casio camera doesn't show up in the drive window. I had a power failure with it connected and now it doesn't show up. I can see it in the About this mac window and I have tried ejecting it with the utility. It does show up and is ejected with the utility. But doesn't show up in IPhoto 6.

Hi again Kim,
Image capture is not a preference in itself.
Image Capture is a small application in your Applications folder (at least it should be there if using 10.3.9 I believe).
Perhaps, if not there, try looking in the Utilities folder for it.
Let us know if you still cannot find it.
littleshoulders [:-)

Similar Messages

  • Photoshop CS6 is not showing any network drives within windows 8.1.

    Photoshop CS6 is not showing any network drives within windows 8.1, I can only browse the local disk for files. Please advise?
    And when i try opening a file directly from the network, photoshop starts but does not open the selected file?

    The dialog you show there looks like it may be a CS6 open dialog running on windows 8.1 that is showing what is local.  Network is not highlighted selected.
    Here is a CC Open one windows 7 pro showing  areas of what is accessible.

  • I have a 7th generation ipod nano that is not showing in the itunes window after being put on the USB. how do i fix this, i have a 7th generation ipod nano that is not showing in the itunes window after being put on the USB. how do i fix this

    I have a 7th generation ipod nano that is not showing in the itunes window? how do i change that?

    Thank you Bilbo! I was trying to find the instructions on how to do this, but was unable to locate them until you pointed me to it!
    After running the diag, it shows me error...
    [Device Opened]
    Error
    Menu to continue
    From the information Ive read on this occurance, my HD is shot? Is this true or likely? What would be recommended as the next step?

  • My new USBs are not showing up in Disk Utility

    HI ! I just purchased 25 new USBs to upload biz marketing content to. The USBs are not showing up in the FInder (I've checked all the options in the Preferences Pane) nor are they showing in Disk Utility. What am I missing? Or should I just return them?

    Let's clarify what you have written:
    1. My usb drives seem to work with other usbs (that have been used on both mac and windows machines before - still works).
    What specific USB drives are you refering to? 
    Are they the 25 in question?
    Have you tested the USP ports on your MBP with other USB drives (not the 25) or other peripheral devices to make certain that the ports are functional?
    2. I've had the usb's reformatted on a windows machine and we were able to plug it in to an old mac to see it there.
    Are these the 25 USB drives in question?  If so, what was the format?
    3. It is only when I have returned to my office that ONLY these usbs do not work.
    These are the 25 USB drives that have been formatted and are seen on the 'old mac' but do not appear on your MBP?  They still do not appear in Disk Utility?
    Is this a Mavericks issue? How else would it be visible on older Mac's and not my new Power PC?
    It should not be a Mavericks issue  
    What do you mean by 'new Power PC'?  Are you using a MBP or a Windows machine or is this a typo?  Exactly what MBP model are you using?
    Ciao.

  • A printer that I have connected to my iMac via usb in not showing up in printer options on my iPhone or iPad and it use to before I upgraded to 8.1

    A printer that I have connected to my iMac via usb in not showing up in printer options on my iPhone or iPad and it use to before I upgraded to 8.1. How can I fix this?

    Is it an Airprint-compatible printer, and is its WiFi enabled if it is? (see: About AirPrint)
    If it isn't an Airprint supported printer, then you need a 3rd party driver on your iMac to print from an iPhone. Such as Printopia. As it worked in the past you probably have such a printer driver installed; check and see if it's running.
    Beyond that try restarting the printer, restarting the phone, restarting your router, and restarting your computer.

  • Photoshop CC2014 running under window 8.1.  How do I access mini bridge.  It does not show under FILE or WINDOW-EXTENSIONS.  Works ok with CS6

    Photoshop CC2014 running under window 8.1.  How do I access mini bridge.  It does not show under FILE or WINDOW-EXTENSIONS.  Works ok with CS6

    Photoshop: Spring Cleaning | PHOTOSHOP.COM BLOG

  • HT1384 My ipod nano 3rd generation, when connected by usb, does not show up in itunes, does not show up on my computer, does not seem to charge by the wall charger. It just has a black screen. Any ideas for me?

    My ipod nano 3rd generation, when connected by usb, does not show up in itunes, does not show up on my computer, does not seem to charge by the wall charger. It just has a black screen. Any ideas for me?
    I've run diagnostics. Can't find device. I've tried resetting. The toggle has been turned on and off.

    Cable works fine on my other iPod. Reset by pressing menu and center button together for 6-10 seconds. Left it to charge for many hours. Started acting up while running. Suddenly the music stopped playing but my Nike + was still working for the rest of my run. Took it straight it home and plugged it in to the wall to recharge since the battery was fairly low. Looked like it recharged ok but then screen went blank and now does it not show up on iTunes, does not seem to recharge by the wall charger (apple wall charger plugged into a surge protector in India). I have turned the hold switch off and on many times.
    Sounds like a repair issue, which is not easy to do in India :(

  • HT4972 I AM USING WINDOWS XP. WHEN I AM CONNECTING MY IPOD TOUCH  MODEL NO. MC 008LL TO MY PC ,CHARGING INDICATION IS COMING BUT NEITHER THE WINDOWS NOR THE LATEST VERSION I TUNE DETECTING MY IPOD. IT IS ALSO NOT SHOWING IN I TUNE WINDOWS.

    I AM USING WINDOWS XP. WHEN I AM CONNECTING MY IPOD TOUCH  MODEL NO. MC 008LL TO MY PC ,CHARGING INDICATION IS COMING BUT NEITHER THE WINDOWS NOR THE LATEST VERSION I TUNE 10.6.3 DETECTING MY IPOD. IT IS ALSO NOT SHOWING IN I TUNE WINDOWS."DEVICE LIST" IS NOT DISPLAYING IN LEFT HAND SIDE WINDOW OF I TUNE. BEFORE IT WAS WORKING IN ITUNES 9 AND I WAS USING IT. BUT NOW IT IS  NOT DETECTIN AT ALL. SO PLEASE HELP ME WHAT TO DO?

    Have you tried here:
    iOS: Device not recognized in iTunes for Windows

  • Video will not show in the preview window

    I am using iMovie 08 and have some video that I pulled into iMovie using my iSight. Whenever I am trying to preview my movie it will not show in the preview window. I did a software update for iMovie and the issue is still happening. Any ideas??

    Although the same not preview-able iMovie event played perfectly fine when transferred to a different mac running perian and divx, disabling Perian solved the issue on my macbook, too!
    Thanks for the tip!
    I still wonder why some clips preview and some don't (with perian running)...

  • Msi Live Update....not Show The Last Driver

    Hi
    whe MSI Live Monitor (MSI Live Update 3), search.. not show, the last driver...and bios....
    I have a G4MX460-VTP
    and the driver in the MSI Live Update is:
    Online Ver. 4403 (MSI Version)
    but when visit the MSI webpage (http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=154) the last driver is:
    Nvidia driver 45.32 for Win2000/WinXP/Server2003 OS
    and in the Nvidia webpage is 50.16.....
    and the same happend with the VGA Bios...
    y fix my vga cad update the VGA bios....but...this update don't show in the Live Update 3
    How fix it???
    thanks

    Do not update the VGA BIOS unless you have a good reason to. It is not like a motherboard.
    Go to  nVidia Drivers if you want the latest drivers.
    Live Update may not have been updated OR the version reported by the Live Update utility has been tested successfully with that card. Newer drivers sometimes cause problems with older cards. The only way to know for sure is got to the nVidia site and try the latest.

  • USB/DirectShow camera not showing in NI-MAX

    I've got a Point Grey Chameleon CMLN-13S2M USB 2.0 camera and it is not showing up in NI-MAX.  
    I'm well aware of the Directshow registration problems with the PGR cameras, and as far as I can tell the camera is properly registered.  It shows up with no problems in AMCAP, a simple Directshow viewer, and also in Skype.  
    I just uninstalled the PGR drivers and spent a while going through the registry to delete all references I could to Point Grey and PGR.  I then reinstalled the 32 bit version of the latest drivers, v2.5 beta 2.  I also upgraded the camera firmware to the latest.
    I'm running
    Labview 2012 SP1 f2, 12.0.1
    Vision development module 12.1.0
    MAX 5.4.0f0
    NI-IMAQ 4.7.2
    NI-IMAQdx 4.1.0
    Any ideas?  This is a side project and I've been working on it off and on now for more than a year and I've got to get this camera working.
    Solved!
    Go to Solution.

    Yes, I still see the camera with other DirectShow viewers after the reinstall.  The latest Point Grey drivers give the option to register the directshow drivers during the installation.  I assumed that this worked since the camera shows up with the other DirectShow viewers, but I also manually registered the files according to the instructions in your links just in case.
    I believe that a year or more ago ago when I was running an old version of LV (2009, I think) it did show up in MAX.  I had upgraded a few of the LV components piecemeal, but when my university upgraded to 2012 I decided to uninstall and reinstall with the latest versions of everything.  I have never seen it listed in MAX, red x or not, since I uninstalled the old version to upgrade.
    I have used a camera from a different company and it worked fine.  
    I found that the 32bit directshow cameras are listed in the registry at
    HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Wow6432Node\CLSID\{860BB310-5D01-11d0-BD3B-00A0C911CE86}\Instance
    and I verified this by modifiying the "FriendlyName" registry key for the camera that does show up and observing that the name changes in MAX.  The point grey camera is listed here in the registry but does not show up in MAX.

  • Telstra's New 4G USB Modem - Not Showing as Drive in Finder

    Hi all
    I recently got the brand new Telstra (Sierra Wireless AirCard 320U) Next G USB 4G Modem as shown here: http://go.bigpond.com/wireless/?cid=ZBP_access_2_mobilebb_270911_title. 
    I plugged in in my MacBook Air 2011 and all appeared fine, the setup screen started and went through partially with no issues - the software in installed on the device to run automatically, however I had to quit the Setup and removed the USB modem.  Now this device and its built in software will not show in Finder at all.  I restarted the system, same problem.  What's caused this and how can I resolve the issue?  This is a brand new device, only just launched so even Telstra dont provide the current OEM software included on the device,as a download.
    I have tried Disk Utility, but nothing shows in the USB port (swapping USB ports also fails).  I might have to plug it into a Windows machine and drag the DMG file off the Modem device and then run the DMG file on the Mac itself.  Any ideas / suggestions anyone?

    This is where you can find the connection manager download
    http://bigpond.custhelp.com/app/answers/detail/a_id/19876/session/L2F2LzEvdGltZS 8xMzIxNDMxMjY2L3NpZC9kR0NWTmVKaw%3D%3D

  • Firewire camera not found in MAX on Windows 7

    Hi all,
    Used to run a firewire camera on Windows XP with no problems. Using version 8.6 and do not want to change this if at all possible. New lab PC runs windows 7 and firewire camera not found in NI MAX. The drivers associated with the camera are NI-IMAQdx IIDC...
    NI-MAX does not even show a NI-IMAQdx camera and there is no way to add such a camera. The same issue arises for an AVT Guppy camera suggesting it is not camera dependent.
    Has anyone any suggestions as how to rectify this. We have full development software v8.6 with all the appropriate drivers and modules required as it previously ran problem free on an XP machine.
    Cheers,
    leeser

    Hi Leeser,
    Which version of the driver did you previously have installed under Windows XP? It would be worth trying to re-install the latest version of the NI-IMAQdx driver. You will be able to install the Vision Acquisition Software 08.2010, which works with LabVIEW 8.5 and later (and installs NI-IMAQdx 3.7).
    Regards,
    Imtiaz Chowdhury
    Head of Digital Technologies
    Brand786

  • CD/ DVD/ USB do not show up on desktop

    Hi there, i have searched thoroughly through these forums but can not seem to find an answer. When i put in a CD/ DVD nothing shows up on my desktop. It stays in and ejects fine when i want it to, it is just that the imac is not recognising it, it is also not recognising my external USB drives, such as my USB stick and my external hard drive.
    I have looked in the OS help menu, and it doesnt help, nothing is set to ignore, all the right boxes are checked. i tried disk utility but it says there are no permissions to repair? What is going on? I have done nothing different with my computer since buying it last year. And i dont have mac care as it was an ex demo model. little help?

    To Apple Discussions.
    See Knowledge Base Articles:
    http://docs.info.apple.com/article.html?artnum=88338 What to do if your computer won't recognize a FireWire or USB device
    http://docs.info.apple.com/article.html?artnum=301733 iMac G5: How to Reset the SMU (iMac G5, the iMac G5 (Ambient Light Sensor), and the iMac G5 (iSight)).
    If none of the above are of any help regarding your CD issues:
    Try a different brand.
    Make sure the DVDs are not dirty, smudged and/or scratched.
    http://docs.info.apple.com/article.html?artnum=50448 How to Handle and Clean CD and DVD Discs
    Your drive may need cleaning. Cleaning kits can be purchased from any store that sells CD/DVDs.
    "I have done nothing different with my computer since buying it last year."
    That may be your problem. Go to your Software Update control panel & download all the updates. There have been quite a few since last year (including OS'es) that your computer probably needs.

  • IPod Classic not showing in iTunes or Windows

    I received a new iPod 80GB Classic for Christmas today, but I'm having trouble getting it to work with iTunes. I've plugged it into the USB port, but all that happens is that it starts charging but doesn't show in My Computer or iTunes.
    Before I got this new iPod I was using a 2GB iPod Nano, could it be because I was syncing a particular iPod with iTunes before I got this new iPod? Or do I have to do something like charge the iPod completely before connecting it to the USB port?
    Any help would be greatly appreciated. Thanks.

    Have you had a chance to look at these troubleshooting pages? They may be of some help:
    iPod missing in My Computer and in iTunes
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    If you are using a laptop, this page might help: iPod not recognized when connected to Windows laptop over USB

Maybe you are looking for