USB camera substitutes for internal isight web cam

I am exploring the possibility of using one of two usb sources as external chat cams for ichat/AV (as opposed to internal isight, which I find inflexible on my desktop imac).
I have connected both sources, but neither are found as external cam options when I open up ichat.
My two options are (1) canon powershot A85 digital camera (2) macally icecam (which worked fine on an older G3 powerpc imac).
I am wondering who has successfully used powershot A85 or icecam as a webcam instead of isight in 10.5 environs, how you got them to function, what circumstances have you tried that did not work, and any retrospective insight as to why one or both worked.
I'm just beginning the learning curve for leopard. I have used macs for awhile now, but I am hoping to maximize my knowledge towards incorporating some purchases that are less than 5 years old in order to reduce waste and reduce personal expenditure.
Thanks in advance for both good and gloomy information regarding this matter.
Best to All!

Your exploration will not go far since the iMac's FireWire ports will not work with your cam.
(you'll need an extra hub in between, then it will work)
USB 2.0 is very fast, a USB webcam that is UVC compatible will work, almost as good as your built in.

Similar Messages

  • Can Airport Express USB port substitute for the USB Power Adapter?

    Literature on website says USB port will only "recognize" printers. But can USB port be used to power iPod, since no "recognition" is needed, just power?

    But can USB port be used to power iPod, since no "recognition" is needed, just power?
    Yes, unless the iPod is a third generation full-size model, which can't charge from any USB source.
    (44198)

  • How Disable Mac Internal iSight Camera?

    I have looked through previous postings on how to turn off the MBA internal iSight camera and the instructions are not working for me.
    I moved:
              System/Library/QuickTime/QuickTimeUSBVDCDigitizer.component
    into a new folder:
              System/Library/QuickTime Turn Off iSight Camera .
    Then I rebooted.
    When I go into Skype > Preferences > Audio/Video I can still see my face and the green light.
    Next steps?

    Move (you will actually be making a copy) the QuickTimeUSBVDCDIgitizer.component file from your /System/Library/QuickTime folder to your UserName (Home)/Documents folder.
    Then throw the QuickTimeUSBVDCDIgitizer.component file from your/System/Library/QuickTime folder in the Trash and empty it.  You will need to authenticate with your system administrator password.
    Restart your Mac.  Internal iSight (and amy other USB cam) should no longer work.
    If the above does not work, see an Apple-certified technician and ask him to remove your iSight.
    Message was edited by: EZ Jim
    Mac OSX 10.8.5

  • Ichat support in 10.4.10 for USB cameras?

    With apple not selling isight cameras anymore i was told that you couldnt use a USB based Camera with ichat Ilife etc. However I was in the Apple store yesterday and one of the
    Genius said he thought that was fixed in 10.4.10?? can anyone help me with this. i want to use an Apple display with a Mac Pro and i need a good camera to attach via USB.

    Hello alangsam
    A few apps, including iMovie, require a Firewire DV signal from any external webcam. No external USB cam works with such apps.
    If you need to use your external webcam with iMovie (or other apps that demand Firewire input), use a Firewire webcam or your compatible DV camcorder rather than a USB cam.
    A 10.4.10-equipped Mac can use UVC (the latest USB specification) webcams for all other apps. If you buy USB, be sure to get a camera that supports the UVC standard. Older, non-UVC USB cams might work if appropriate driver software is available, but the UVC cams are supported by the latest Mac OS without additional software. See the system requirements for the application software you want to use for exact camera and, if applicable, additional software requirements.
    For more info, see this post about Webcams other than iSight or search iSight Discussions for "UVC" (without the quotation marks.)
    EZ Jim
    PowerBook 1.67 GHz   Mac OS X (10.4.10)    G5 DP 1.8  External iSight

  • Isight and USB Camera

    Hi,
    I have an Imac with built in camera, I'm trying to connect a second camera Creative USB, and seems it is no recognized. Anyone has an idea how I can configure the new camera ?

    Welcome to Apple Discussions, goolu
    The answer to your question depends on which Creative USB webcam and application you are trying to use.
    If your particular model supports the current UVC standard, it should work without additional software.
    If your Creative USB webcam is one of the non-UVC models in this list of Known Working Configurations, you will need to add iUSBCam software and, if indicated, the macam driver to use the cam with iChat. If you want to use it for other than iChat, the specified driver alone may do. 
    iMovie requires a Firewire DV signal from external cameras, so you cannot use your Creative USB cam with iMovie.
    If you need more help that the above, see the Creative Customer Support web page or their "Contact Us" link for help on how to use their camera with your system directly from the camera's supplier.
    EZ Jim
    PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.2)  External iSight

  • USB camera for Ti Powerbook

    Hi,
    Just got iChat and Skype set up at work (anyone else notice the quality difference between the two? its drastic)
    Anyway, I'm wondering if anyone can recommend a camera to use with my old titanium powerbook when I'm out of the office. Although there are threads on here that discuss which usb cameras work with OS X, I couldn't find one that mentioned cameras that will clip onto my screen nicely. All of the PC ones I found have too big a clip for the powerbook screen.
    Any suggestions?
    thanks

    I ended up settling for a Genius Webcam EYE. Bought this in New Zealand for NZ$20.
    It clips onto the lid pretty well. It's slightly loose, as its also made to accommodate thicker lids found on PCs. Can be fixed by slipping something like a card behind the camera's clip.
    The picture quality is reasonable, but nothing great. I'm not sure how much of this is down to my powerbook (it is an old 667mhz g4 after all). I get considerable lag with it, but it suits my requirements okay. I'll have to test it out on the g5 sometime.
    Comes with OS X drivers, but needed to use the Ecamm iChatUSBCam (US$ 9.95) to get it working with iChat. The benefit of this is being able to also send a video of my mac's desktop over the web.

  • Any chance for a USB cam?

    Hi.... I've just got myself a MacBook so I'm thinking of passing my old iBook G4 to my partner. Would it be remotely possible at all for him to use iChat (v. 3.1.5) with a pretty standard usb web cam? Or, what is the alternative? We live 11,000 kms apart now.
    Thanks!
    iBook G4   Mac OS X (10.4.7)  

    Hi
    To use a USB cam you will need this http://www.ecamm.com/mac/ichatusbcam/
    Cam's and drivers http://www.ecamm.com/mac/ichatusbcam/configs.html
    Tony

  • Apple iSight Web Cam

    Apple do not seem to have any stock,nothing from EBay or Pawn Shops. I need to buy an Apple iSight Web Cam for my Mac Book Pro G4. Can anyone help me find one or sell me one please?
    Thanks

    http://www.sonicviewshop.com/products.asp?stid=5234&cat=Computers&product_id=270 248852524
    http://cgi.ebay.com/Apple-iSight-Webcam-Camera-M8817LL-C-SEALED-NEW_W0QQitemZ370 060134153QQcmdZViewItem
    If you google it you may find more.

  • Internal iSight camera on, but LED is off... Hardware problem?

    Hello all,
    My MacBook Pro (15", late 2007) has developed a strange "feature": the internal iSight LED no longer lights, even with the camera on. This is quite unsettling.
    I have searched the Intertubes, but could not find any references to this kind of problem.
    My MBP is covered under AppleCare, but I'm reluctant to send it in for repairs (again!), since that takes at least 2 weeks. Frankly, I can't do without my Mac for 2 weeks since I use it professionally.
    Is the LED "hardwired" to iSight power, i.e. is this a definite hardware problem, or is there some hidden setting somewhere? I have tried zapping the PRAM, but that did not help...
    Any info would be appreciated.
    Kind regards,
    Ed.
    Message was edited by: Ed Voncken

    Can you or anyone else confirm that the LED is a "hardware" feature on the iSight, or is it software-controlled?
    Of course, the camera still appears to work without the LED. But that is exactly the point There is no proper feedback on camera status now, which is unsettling. Bringing it back in is not (yet) an option; I already went without it for more than a month during the first 18 months of ownership due to 2 earlier repairs.

  • How to get source code for WinCE 6.0 USB Camera Driver for ARM4I Processor

    Hi,
    I am implementing USB camera driver for my mini2440 board which has an ARM4I processor. The sample code
    "Windows Embedded CE 6.0 USB camera Driver" downloaded from:
    http://www.microsoft.com/downloads/en/details.aspx?FamilyID=2ef087c0-a4ae-42cc-abd0-c466787c11f2
    does not support ARM4I processors. When trying to generate in VS2005 Platform Builder my WinCE 6.0
    image for mini2440 with the Third party catalog items "MJPEG Decompression Filter" and "USB CameraDriver",
    the linker giver errors. Please advise where to find a working source code for USB (now revision 1.1
    ("full-speed") is supported in my WinCE 6.0 image) camera for my ARM4I processor. The code should 
    be in C# but C++ will be fine also.
    Thanks,
       Paul

    i get this on the hyperterminal when i run the cameradshowapp.exe
    Compulab Windows CE NAND X-Loader for CM-T35                                           
    Built Dec 20 2009 at 16:48:16                            
    Version 1.01.222               
    Commit Date 16/12/09                   
    Jumping to bootloader                    
    Microsoft Windows CE Bootloader Common Library Version 1.4 Built Dec 20 2009 16:                                                                               
    46:16    
    INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0x200b                                                    
    Texas Instruments Windows CE EBOOT for CM-T35, Built Dec 20 2009 at 16:48:10                                                                           
    Version 1.01.222               
    OMAP3430 Version 0x4b7ae02f (Unknown)                                    
    TPS659XX Version 0x10 (ES2.x)                            
    -OEMPinMuxSetup....                  
    System ready!            
    Preparing for download...                        
    INFO: Predownload               
    +FMD_Init        
    Checking bootloader blocks are marked as reserved (Num = 6)                                                          
    +FMD_Init        
    WARN: Boot config wasn't found, using defaults                                             
    +FMD_Init        
    OALFlashStoreOpen: 4096 blocks, 64 sectors/block                                               
    OALFlashStoreOpen: 2048 bytes/sector, 14 reserved blocks                                                       
    Calling LCD_TurnOn                 
    +FMD_Init        
    +FMD_Init        
    BLConfigureFlashPartitions: dwBootPartitionSectorCount = 0x5fff, partition actua                                                                               
    l size =0x4d3a!!!                
    Hit space to enter configuration menu 5...                                         
    Hit space to enter configuration menu 4...                                         
    Hit space to enter configuration menu 3...                                         
    Hit space to enter configuration menu 2...                                         
    Hit space to enter configuration menu 1...                                         
    INFO: Boot Device location = 0x8000020                                     
    Load NK image from flash memory                              
    +FMD_Init        
    ROMHDR (pTOC = 0x823b8c28) ---------------------                                               
      DLL First           : 0x4001c001                                 
      DLL Last            : 0x41c7c0d8                                 
      Physical First      : 0x84001000                                 
      Physical Last       : 0x863bbdec                                 
      Num Modules         :        294                                 
      RAM Start           : 0x863c0000                                 
      RAM Free            : 0x863d5000                                 
      RAM End             : 0x90800000                                 
      Num Copy Entries                        
      Copy Entries Offset : 0x85256e38                                 
      Prof Symbol Length  : 0x00000000                                 
      Prof Symbol Offset  : 0x00000000                                 
      Num Files           :        116                                 
      Kernel Flags        : 0x00000002                                 
      FileSys RAM Percent : 0x00000020                                 
      Driver Glob Start   : 0x00000000                                 
      Driver Glob Length  : 0x00000000                                 
      CPU                 :     0x01c2                                 
      MiscFlags           :     0x0002                                 
      Extensions          : 0x84002020                                 
      Tracking Mem Start  : 0x00000000                                 
      Tracking Mem Length : 0x00000000                                 
    NK Image Loaded            
    Launch Windows CE image by jumping to 0x80001000...                                                  
    Windows CE Kernel for ARM (Thumb Enabled) Built on Apr  5 2011 at 17:47:22                                                                         
    +OEMInit       
    ýSETDATAOUT access is OK....                           
    Forcing clean boot                 
    MainMemoryEndAddress = 0x90800000                                
    -OEMInit       
    +FMD_Init        
    Dumping registry defined VK                          
    Row 0:  0x18    0x9     0x25    0x0     0x0     0x0                                                  
    Row 1:  0x26    0xd     0x28    0x0     0x0     0x0                                                  
    Row 2:  0x27    0x24    0x23    0x0     0x0     0x0                                                  
    Row 3:  0x0     0x0     0x0     0x0     0x0     0x0                                                  
    Row 4:  0x0     0x0     0x0     0x0     0x0                                             
    Row 5:  0x0     0x0     0x0     0x0     0x0     0x0                                                  
    SMSC922x: Core Ethernet Init.                            
    Lan9220 identified. ID_REV = 0x92200000                                      
    SMSC922x: MAC address = 00:01:c0:0a:a0:db                                        
    Lan9220 identified. ID_REV = 0x92200000                                      
    SMSC922x: MAC address = 00:01:c0:09:88:80                                        
    SDIO8686: Loading Driver [version = 38.p44]                                          
    SDIO8686: Reset with TPS GPIO 2 --> done                                       
    !!!Kernel mode PSL 'PRdr' de-registered!!!                                         
    !!!Kernel mode PSL 'HRdr' de-registered!!!                                         
    !!!Kernel mode PSL 'FRdr' de-registered!!!                                         
    EHCI USB Host: HcdPdd_Init+                          
    [OTG] OMAPMHSUSBOTG::Init()+                           
    OMAPMHSUSBOTG::PostInit(): Start.                                
    DSPLINK Module (1.61.04) created on Date: Jun 24 2009 Time: 16:30:52                                                                   
    Display parameters:                  
            Height = 0x280                     
            Width = 0x1e0
            HSW = 0x20
            HFP = 0x8
            HBP = 0x17
            VSW = 0x1
            VFP = 0x4
            VBP = 0x3
            DVI is not enabled
            PixelClkDiv = 0x7
            LogClkDiv = 0x1
            ClkSelDSS = 0x5
    TD035:: LCDTurnOn
    TD035STEE1: Turned display on.
    TD035:: Finished LCD VGA init
    AUTOLAUNCH: Checking HKEY_LOCAL_MACHINE\Startup key for programs to run.
    Can't open HKEY_LOCAL_MACHINE\Startup key.
    [WiFi]: Firmware Version: 9.70.3.23
    CCaptureFramework: Failed setting up the camera data.
    CameraDShowApp: Initializing the camera driver list failed.CameraDShowApp: Retri
    eving the driver list failed.CameraDShowApp: Selecting the camera device failed.
    CameraDShowApp: Selecting the camera device failed.CameraDShowApp: Selecting the
     camera device failed.CameraDShowApp: Selecting the camera device failed.CCaptur
    eFramework: Retrieving the still stream config failed.
    CameraDShowApp: Initializing the capture graph failed.

  • I have a new iPad Air. Can I use plug in USB camera reader to have a load of movies etc on an external hard drive and then plug and play so to speak. I'm off on holiday and haven't got the capacity to have everything on that I'd like for the kids

    Can I use a plug in USB camera reader to have a load of movies etc on an external hard drive and then plug and play so to speak? I'm off on holiday and haven't got the capacity on the iPad to have everything on that I'd like for the kids.
    So basically I want a hard drive with X amount of films etc on. Can I then watch them on my iPad?
    Hope this makes sense.

    External HDD won't work.
    You need something like this:
    http://www.seagate.com/goflexsatellite/

  • Cheapo alternative to Apple Lightning to USB Camera Adapter for audio interface?

    I am getting an audio interface (Steinberg UR44) which can be controlled with an iPad via the Apple Lightning USB Camera Adapter and a standard USB printer cable (Type A male  to type B male), but I am too cheap to buy the ridiculously overpriced Apple adapter, so I am wondering if the following will work instead:
    iPad --> Apple lighting male to USB Type A male cable (the standard charging cable) --> USB Type A female to Type B male adapter --> Audio Interface
    Other adapters are available for USB Type A female to Type B micro or mini male, so the same kind of arrangement might work for cameras.
    The adapters are five bucks or less vs. thirty for the RIDICULOUSLY OVERPRICED (yes, I know, I already said that) Apple adapter.
    I am thinking this is a better way to go than a cheap unlicensed knockoff lightning adapter, because the critical part of the connection (the lightning plug and electronics) would still be made by Apple.
    Has anyone tried the above with either an audio interface or camera?

    Because it was designed for use with the iPad. Apple makes no claim that it will work with an iPhone.

  • Can I use my ipad2 as a monitor for flexible USB camera

    Can I use my ipad2 as a monitor for flexible USB camera. I have a flexible camera that connects via USB and has LEDs at the lens for illumination.

    Not unless it is wifi and has an app.

  • Cant install NI-IMAQ for USB Cameras

    i tried to install NI-IMAQ for USB Cameras.but it cant get it to install its giving the error need higher version than 7.0 but i am using 8.0 .also it is saying that it needs vision 7.0 ........??wat are these error ..how can i get it install ????????help
    thx
    Regards

    nolsqn,
    Can you clarify what you have installed? You must have all of the following installed to get NI IMAQ for USB Cameras to install:
    System Requirements:
    - Windows 2000/XP (English,
    Italian, Japanese, French, Italian, Norwegian, Dutch,
    Spanish/Portuguese, Russian, and simple Chinese)
    - LabVIEW 7.0 or higher with NI Vision 7.1 or higher for the USB LabVIEW support
    - Vision Assistant 7.1 or higher for the USB Vision Assistant plugin module
    - Vision Assistant 8.0 or higher for the USB Express VI
    It sounds like you are missing Vision Development Module (this is what is referred to as NI Vision)? Is this true?
    --Michelle
    Instrument Control R&D
    National Instruments
    Instrument Control
    Machine Vision

  • Download NI-IMAQ for usb cameras

    where can i get the NI-IMAQ for USB cameras???
    i woul like to download this application for my registered product

    Can be taken from External link . 
    I copied this link from this thread:
    http://forums.ni.com/ni/board/message?board.id=170&message.id=154541&requireLogin=False
    Regards, Guenter

Maybe you are looking for

  • Error when executing a report in Bex analyzer"

    Hi  all  , when I am executing a report in Bex analyzer and selecting a hierrachy and execute the report it is giving an error " in Program CL_RSR_RRKO_HIERARCHY and Form SEL_TO_SELDR_EQSID.Any reason for this. thanks Rao

  • Try to show special characters in a JLabel

    Hi everybody, I have a big problem with special characters and to display them. At the moment I'm writing an Applet where you can type in in a JTextField stuff like \u0398 \u03B6 \u03A6 \u03C9 \u03BE. Then you press a JButton and the method TextField

  • Adobe Reader X - Commenting by Highlighting

    I recently downloaded Adobe Reader X on my work computer since we are in the process of switching our practice over to electronic medical records. One of the Doctor/Clinicians concerns with this move was that they would be unable to highlight or put

  • Firefox Opening new windows reverts to original Window

    Just started with this problem, when I open a new window which is my preference rather than Tabs I find that whereas it used to open the new window and that was active, it is now opening a new window and then reverting to the original one. Any ideas?

  • Order that podcasts download is not consistent.

    I have noticed that when I click "get all" on the first podcast subscribed to, the podcast episodes download from top to bottom (most-recent to least-recent). But for any other podcast subscribed to (from the second in the list to the last in the lis