USB cannot recognize the device when i plugged my ...

Hello there
I have a problem when i plugged my n95 to the computer, the USB doesn't recognize. Even i tried with settings the device, connect with the PC suite, and also roll back the system in both my computer and n95, tried to connect with another computer but it isn't working also. I posted my problem here because i cannot find anywhere to post, sorry if I posted wrong. And do you have any solutions for me, plz help me.
My device firmware is v30.0.015
Thanks you very much

Next thing then would be to ensure that your camera/USB device is installed correctly. Click here to view Microsoft's web page on this subject. After installing the USB device, restart your computer. See if that doesn't do the trick. If not, we can go from there.

Similar Messages

I have the first ipad and it won't recognize the charger and also the computer won't recognize the ipad when I plug it in to sync. Any ideas why?

I have the first ipad and it won't recognize the charger and also the computer won't recognize the ipad when I plug it in to sync. Any ideas why?

If your using the same cable for your wall charger as you are for your computer, than the problem is probably within the cable (if there isn't visible damage to the cable of coarse). The quockest solution would be to buy your self a new cable. There is probably nothing wrong with your wall adapter, so just the cable will do.

ZEN MICRO, USB wont recognize the device

Hello, I recently bought a Zen Micro, and I plugged it in via the usb cable, and installed the drivers for it. After installing the drivers, I clicked on Zen Micro Media Explorer, and it said to please plug in your zen micro. The player functions, I can go through the menus and things, but my usb will not recognize the device.. HELP? I also went on the site and got the latest drivers. I also tried it on a different computer, with the same result. Did I forget to install something? 

what i did when I first got my zen micro, as the instructions said, to insert the installation CD and install everything before plugging in the zen micro.
maybe you can try deleting everything, then reinstalling the software from the installation CD then plug in your micro to see if that works...

My iPad has a passcode on it, but it got typed in too many times, and now it has been disabled. However, when I try to plug it into iTunes, it tells me it cannot recognize the device until you enter the passcode.

My ipad has been disabled and now I'm trying to get it to work again. However, when I plug it into my computer it says that i need to type in the passcode, but i can't until it connects to itunes...also, my ipad has only been plugged into my friend's computer. it has never been plugged into a computer since then. Would this have anything to do with my problem?

This probably has nothing to do with plugging into your friends computer, but unless you have a backup, everything on the iPad will be lost.
You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
You will probably have to use recovery mode
http://support.apple.com/kb/ht4097
You can download purchased content again from the various stores as long as you use the same Apple ID, as long as the content is available in the stores, and as long as the content is available where you live.

TS1368 seems like itunes cannot recognize the device connected to it, please help

my iphone cannot connect to itunes, already tried to check the cable and the usb port of the deskstop pc and even the notebook still the same.. can anyone help me resolve this issue?

Make sure you are using a main USB port off the computer, USB 2.0 is the only way the iPod will function properly. If you are using Windows XP, the iPod will show up under the "Safely Remove Hardware" icon as well as Device Manager. The reason the iPod does not show up in iTunes or My Computer is because the computer thinks the iPod and hard drive are the same letter. To fix this problem follow these steps:
Go to START
Control Panel
Administrative Tools
Computer Management
Click on Disk Management (Lower Left)
Right Click on the iPod "Drive"
Click on Change Drive Letter and Paths
Click on Add
Select any letter above D:
A message will pop-up, click OK
Restart the computer
Windows will now recognize the iPod as a separate drive in My Computer and it will also appear in iTunes.
The "Do Not Disconnect" icon is normal when the iPod is connected to the computer.
I hope this info is helpful!
Dell Inspiron 5150 Windows XP Laptop

When I connect my IPad to the computer my computer will not recognize the device as being plugged in

I'm trying to connect my IPad to both of my computers. Each time I plug it into the USB port I get nothing. The computer doesn't recognize that a device is plugged in. I have tried re-installing ITunes, as recommended, but I still can't get the computers to pick up my IPad. What is happening?

Device not recognized
http://support.apple.com/kb/TS1538
Note: You should only sync to one computer

Iphone 4 is stuck with itunes usb screen, and my computer won't recognize the device, Help!!

My iphone 4 is stuck on the screen with the itunes symbol and usb. When I plug it into my computer it says that it cannot recognize the device and theres a malfunction. I've tried unplugging the port ffrom my phone, going into dfu mode and plugging it bavk in. the apple logo comes on for a minute but then goes right back to the itunes/usb screen. I'm at a lose for what do do..every forumn says dfu mode, but its not working. Any other suggestions? Thanks!

Chris477 wrote:
My iphone 4 is stuck on the screen with the itunes symbol and usb. ... I'm at a lose for what do .... Any other suggestions?
Looks like a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

HT201412 My phone number is not known on my iPhone and my computer does not recognize the device.

I updated to ios 6 and now nothing is working on my phone. It does not have a phone number and the computer doesn't recognize the device when plugged in.
The only way it accepts a charge is by electric outlet plugin.

Try going to Settings>Messages>Send & Receive and uncheck the email address(es) shown under "You can be reached by iMessage at". If that doesn't work, you'll have to tap the ID, sign out, then sign back in with a different Apple ID for iMessage.

When you load Windows via Boot Camp Assistant program and run Windows does not recognize the "usb" outlets cannot identify the device through the Dvd or flash

When you load Windows via Boot Camp Assistant program and run Windows does not recognize the "usb" outlets cannot identify the device through the Dvd or flash

Did you install BC drivers on the Windows side?

When plugged my samsung in USB as memory device no new device icon appears at desktop like it used to do in snow leopard. But USB prober recognizes the phone... Why and How?

When plugged my samsung in USB as memory device no new device icon appears at desktop like it used to do in snow leopard. But USB prober recognizes the phone... Why and How?

OK, I think you are trying to connect the printer wirelessly to your wireless router, right?
I think that is the way to go, so let's do that:
1. Restart the router by pulling its power cord momentarily. Let it restart.
2. On the front of the printer go to Setup > Wireless (or Netowrk, not sure) > Wireless Setup Wizard. Run the Wizard to connect your printer to your router.
3. After that, go to Control Panel > Devices & Printers and delete all instances of the printer.
4. Finally re-add the printer with these instructions:
1. Make sure the printer is turned on and connected to your network. Verify that you can access the printer's internal web page by browsing to its IP address before continuing. Get its IP from a Network Test printed from the front panel of the printer.
2. Click >> Start >> Control panel >> Devices & Printers.
3. Click the Add a printer
4. Select Local printer
5. Select Create a new port and select Standard TCP/IP Port and click Next button.
6. Under Device type, select TCP/IP Device. Under Hostname or IP address, enter the printer's IP address. Click Next.
7. Select Hewlett-Packard from the list of manufacturers and select and select your printer model. Click Next.
If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Click Open then OK. Select your printer model. Click Next.
8. If you are asked, use the currently installed driver.
9. It will ask for the Printer name -- enter a new name or use the existing one. This will be the name of the printer that you select from other applications.
10. You may be asked to share the printer. Choose NO.
11. The Print Test Page box appears. Go ahead and print it.
12. Click Finish.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How can I make my Mac recognize my USB device when I plug it in?

How can I make my Mac recognize a USB device when I plug it in? When I plug in my flashdrive drive, the device doesn't show on my desktop, so I have to search for it...

You can try using 'NTFS-3G', its free and you can download it at: http://mac.softpedia.com/get/System-Utilities/NTFS-3G.shtml

My iTunes does not list any devices when I plug in my new iPhone to the computer. how do I get iTunes to recognize my new phone?

My old iPhone died, so I just got a new one. I am hooking it up to my computer for the first time. The iTunes on my computer doesn't show any devices as being hooked up to the computer when I plug in my iPhone. Yet my iPhone is charging so I know it is connected to the computer. Any suggestions on how to get my iTunes to recognize the new device? Thanks

Make sure that your music is in the format supported by the iPhone. I use either MP3 or AAC.
A friend had the same problem a while back. All his music was in the WMA format and is therefore not playable on the iPhone and would not copy. Once he converted his songs to MP3 they copied to his iPhone without problem.

Restoring Your Nano When The USB Port No Longer Recognizes The Device

I can't say for certain if its coincidental or not but as soon as the latest update of v9 for iTunes came out, my computer stopped recognizing my iPod (1st Gen Nano) through all the USB ports.
First, I tried the Nano on a different computer with Windows Vista but the the latest version of iTunes had also been updated on that machine. The laptop also would not recognize the device through any of the USB ports.
Second, I switched cables. Same problem.
Third, I reset the device. Same problem.
Fourth, I tried to update the drivers on the device manager. Same problem.
Fifth, I uninstalled iTunes per Apple's uninstall instructions and that was to no effect.
Now my last option is to restore the device, however because I can't get it to be recongized on any computer I own- I don't know how to do this? Do I take it to an Apple store? Is there a manual way to restore the device to factory settings since every computer I have access to won't recognize the device?
Thanks!

I have exactly the same problem. After updated to the latest version of iTunes 10, my 5th gen ipod stopped being recognized by my Windows 7 Computer.
I've tried:
1. Un/reinstalling Itunes 10, then updating to 10.1 or whatever was the latest one as of 9/30/10.
2. Using a different iPod USB cable to connect to the computer.
3. Using a different USB port.
4. Trying the iPod on multiple computers.
5. Manually selecting the driver within Device Mananger in Windows 7 from "Unknown USB Device" to "Apple USB iPod Driver".
6. Restarting my computer, multiple times.
7. Resetting my ipod "Menu+Select buttons for 6-10 seconds"
From what I understand I could resolve this problem by restoring the iPod to its factory settings, but since I can't get it to be recognized in a computer I am stumped.
This will be my third iPod in 4 years that has crapped out (out of warranty of course) If I can't get this fixed I'm buying a Zune.

I am trying to move a pdf file onto my iPad2, and it says that the device is not connected or has stopped working. But Windows 7 recognizes the device and I can see my pictures. Same thing happens when I try to put music onto the iPad.

I am trying to move a pdf file onto my iPad2, and it says that the device is not connected or has stopped working. But Windows 7 recognizes the device and I can see my pictures. Same thing happens when I try to put music onto the iPad.

When in iTunes on the computer,my our ipadmshould show under devices.
Click on your ipadmunder devices then go to music at top center of the iTunes window, check what you want to sync for music. You need to set it to a folder if I remember which would have your music in it you want synced.
Same with PDF files.....there should be an option for data or even PDF files at the top center area of iTunes when the iPad is clicked under devices.
If your iPad does not show or you cannot click on it under devices which is in the leftane of iTunes, the iPad is not being seen by the computer.
Try unplugging the USB cord from the laptop then give it a few and see if the computer picks it up.

Mac pro does not recognize ipad device when connected via usb port, suggestions?

mac pro running os 10.6.8 does not recognize ipad device when connected via usb port, suggestions? itunes 10.7

Here's a troubleshooting assistant: http://www.apple.com/support/ipad/assistant/itunes/
The most likely issue: Have you plugged your iPad into a USB port that is not directly part of your MacBook Pro?

USB cannot recognize the device when i plugged my ...

Similar Messages

Maybe you are looking for