USB CAP /COVER

I have a xperia z1 purchased last dec, that is 6 and a half months have gone.
The usb cap or cover which helps to protect the water from going inside has become loose due to constant usage. Please tell me what shud i do

My z1 came whit a charging dock in the box... It is very useful because you don't have to open the flaps every time you charge the phone and the flaps have a longer life duration.
So i recommend a charging dock for charging, and it's also looks nice on the desk.
www.sonymobile.com/gb/products/accessories/magnetic-charging-dock-dk31/

Similar Messages

Request for a replacement USB cap for iPod Shuffle 1st Gen. Gifting the iPod my grandma for birthday.

Hi,
I have an iPod Shuffle 1st Generation 512Mb. I am planning to gift it to my grandma for her birthday but unfortunately, the I have lost the USB cap that covers the built in USB port on it. I have not had any luck finding it, and I was wondering if someone could kindly guide me to get a replacement please? Contact me @ [email protected] and if it helps, I live in India so even if I need to order it online/or from overseas, that shouldn't be a problem. Please help.

I'm confused... is your shuffle a white plastic thing that looks like a pack of gum, or an aluminum one with a clip.
The reason for the confusion is that you said:
"+I have only had the iPod for a little over 4 months+"
If it's that new, Apple will replace it under warranty...however if it's a 1st Gen shuffle that's just that new to you, then it may be that the switch on the back is full of crud. It can be cleaned by someone adept with simple tools and at at following directions: http://www.ifixit.com/Guide/iPod/iPod-Shuffle/Hold-Switch/98/1/

USB-cap pops out

The usb charging port flap keeps popping out

Sorry to hear this but you would need to either return your device to the place of purchase or contact Xperia care and have this inspected http://www.sonymobile.com/global-en/support/contact-us/
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

Cover for usb

I've lost the cover for the end of my shuffle. It's the cover that covers the usb. Does anyone know where I can get another?

I broke my USB CAP, did anyone ever get back to you? I need one, and they could not help me at the Apple Store.

I can't open the micro usb cover in my smartwatch 2

I can't open the micro usb cover in my smartwatch 2.
Somebody can help me ?

It can be a bit tricky to open the USB-cover, but there is a small slit over the USB-cover where you can put in your nail and pull it out.
You could also use a paperclip to get out the cap a little so you can easily open it your finger, just be careful so you don't harm the gasket which is on the inside of the USB-cap.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Am I the only S5 owner who has ALREADY has the USB cover break off with regular use, AND have Verizon and Samsung say it is damage and NOT a mfg. defect?

I bought the S5 less than two months ago through Verizon, not Amazon. One of the selling points is that the phone is water and dust resistant. The USB port comes with a little flap plug attached to the phone by a rubber or plastic pin. To charge the phone, this plug is pulled aside, then replaced after charging. In less than two months, the plug attachment broke. Calls to Verizon resulted in the following: They told me I needed to contact Samsung directly. I told them that I did not buy the phone from Samsung. They agreed to call Samsung directly while I was on hold. When they came back on, they told that Samsung said that this problem was phone damage and not manufacturer defect. The fix would be done at my cost. Verizon said that they would change me $300 if I sent the phone back to them.
I don't believe this dust cover is critical to the enjoyment of the phone, but it is discouraging to think that Samsung should sell a phone for $600 with such a manufacturer defect, and that Verizon refused to go to bat for a customer.

Did you look at your own link? It's not available yet. I don't know how to state that more clearly. If it was available, I would have said, "I was also concerned about that flimsy cover breaking off so I purchased a Samsung QI charging cover for my phone. That way I don't have to mess with the USB port cover." But it's not available yet so I said I'm impatiently waiting for it to be released.
And before you get all excited and tell me how stupid I am, most of the items on your link are for the S3, S4, and Note 3. Those are entirely different phones. The only S5-specific QI products available now are 3rd party units that are held in place with tape and look pretty hokey.

My Z1's USB cable port cover/vent is slightly dented, what do I do? is it still waterproof?

When I had just got my z1 phone I must have done something by accident when trying to open my USB port cover as now the end of it leading to the memory card slot cover has a slight dent in it making it look a bit wonky and open at the end if I turn the phone on its side, is this top area of it crucial as in could water get through it if I put it in water? (The phone is waterproof as long as all vents are shut).
I've taken it to my Vodafone shop where i bought it but hey couldn't help they just said it could go into repair but that will cost a lot. So my questions are - Is it going to be okay and will still work fine underwater (as I noticed there's some block thing underneath the cover that goes over the hole of the USB port, what could I do to fix it (sensible answers)? and are there any phone cases for Z1 that would cover this part of the phone? (In the UK and can you name the kind please)
Would be big inconvenience if there's no way to get it fixed as in a week I'm going on holidays and wanted to use the phone there for swimming pool etc (main reason I got it was for the waterproof factor) , thank you so much if you can help

as far as you dont sure about water proffing better dont risk your phone
however you can contact sony here for information about repair or its cost
http://www.sonymobile.com/gb/support/contact-us/
Some will call me fatalist And some will call me freak
But hidden in my throwing fist The fortune that I seek-- Amon amarth

9300 not recognized at the USB port

Hi all,
please look at this issue..
http://supportforums.blackberry.com/t5/BlackBerry-Curve/curve-9300-3G-not-recognized-at-USB-Port/td-...
Thx

My iphone 4, when plugged into my windows xp laptop, wasn't recognised. "USB Device Not Recognised". I was obviously concerned I had just bought a broken iPhone 4...
However, I used a different Apple USB cable and it worked first time on the same windows xp laptop and in the same USB port. The cables look different, the first one had a rounded USB head cover, maybe it was a iPod one (I did buy the phone from eBay). The second, and working cable, has a square USB head cover. I don't know if that is important or not but hopefully the same solution will work for you.
If not, there is a video here that suggests an alternative solution.

Lost power adapter cover

does anyone know where to get a replacement cap/cover for the power adapter? i lost mine.
powerbook g4 12-in. Mac OS X (10.4.6)

not quite sure I understand, but...
your problem is probably one that all powerbook users experience. The power plug that connects to our laptops get frayed and stop working. Apple has addressed this problem with their new MagSafe magnetic adapters.
There isn't much you can do except purchase a new power plug. Apple will charge you close to 100$ for a new one. You should either look on eBay or go to Fry's electronics and buy a generic one. I purchased a white one from Logitech (I think) that only cost 40 dollars.
Good luck!
MacBook Pro 2GHz, PowerBook G4, PowerMac G4 Mac OS X (10.4.5)

P45 platinum boot up usb and oc problems

greetings
i m using a 1.0 rev A2, e5200, corsair ddr1066, antec ea500, galaxy 250
its running 333*11.5(3831mhz) with memory at 1:1.6 (533mhz)
voltages are all at auto except 2.10 for the ddr1066
it is all stable however during booting up it freezes at "initializing usb.." message if i have my printer or game controller plugged(both usb)
cap lock and num lock dont flash and i have to hold the power button to turn it off.
i always have mouse and wifi modem connected via usb but they are not affected.
the problem doesnt exist if its not overclocked.
it sometimes doesnt freeze if its a restart.
the bios was 1.6 and ive tried the beta 1.7b9 which didnt solve, neither did upgrading to the current power unit
also tried disabling usb legacy but didnt help. disabling usb helped but obviously i m not able to use the devices.
besides this, i cant get higher fsb than 350 with both bios, didnt change voltage for northbridge(which i doubt if its needed for 400ish), i did lower multiplier and memory ratios to previous working clocks.
any experience related will be appreciated, let me know if further information needs to be provided
thanks

OK, you have a different CPU and that may be the limiting factor here. You can of course request the latest beta BIOS from MSI. I suggest you do that as it did wonders for my board.
Also can you check on your PSU there should be a label with the full PSU power specifications. Please check the 12V1 and 12V2 rails amps and the max combined amps for the 12V rails.

Caps Lock Key

Doesn't work EVERYTIME that I hit it.
Most, but not always. Why?
Message was edited by: Gavnor

Hi Gavnor,
It's possibly an issue with the plunger underneath the key cap cover. Maybe there's some debris underneath or maybe the plunger needs to be replaced. Not something that's considered "user serviceable." Are you near an Apple Authorized Service Provider or Apple Retail Store? It's probably worth having them take a look at it.

Will ICS update fix overheating issues on Xperia Mini?

Like seemingly thousands of other people my Mini was turned in to a brick because of overheating causeing the back and menu buttons to constantly trigger. (This problem: http://talk.sonymobile.com/thread/23778?start=960&tstart=0). In a different country to place of purchase so warranty doesn't work and its been sitting in the drawer doing nothing for a few months.
Question is, will the same problem persist after the ICS update? Will all those people like myself who were sold a dud be able to take them out of the drawer? I literally have to open the freezer and rub the phone over a bag of peas for it to work. (Nice engineering there Sony)
There is apparently a fix that involves rooting the phone and running a script to reduce touch screen sensitivity.. but I have neither the time nor technical proficiency to be sure that I wouldn't mess it up. Why Sony hasn't implemented a touchscreen sensitivity slider in the phone options.. I don't know...
Anyway.. given that it is a whole new operating system, will the issue still be there? Or should us Mini owners just forget it and throw the thing in the bin?

I had also the same problem. After a couple of months I gave up and bring the phone to the service center. They have fixed it in half hour by doing calibration. I have made a backup of all applications since the procedure erase everything on phone (not sd card). Make sure you sync contact with google or export them to sd card. Now its working fine. They said that the program update will not fix this.
As I can see and I read from service paperm they had change the whole screen with front cover , microphone and a usb cap. Who knows why.

Canon 60DA Won't Power On

I just received my brand new 60DA on Wednesday. I was able to use it, read the manual, get comfortable with it the rest of the evening. That night I hooked it to my scope and using Backyard EOS took it for a run capturing numerous pictures. No issues. When finished, I disconnected from the program, powered off, unplugged and put the body cap cover back on.
The next night, I was not getting any power at all. Thinking the battery may have drained (though it was fully charged during the two hour photo session), I removed it and plugged it into the wall charger. I then inserted the AC adapter. But it still would not power on. The battery was nearly charged as I was getting three flashing lights from the charger.
From what I've read so far some Canon camera's will not power on if there is an issue w/ the memory card or if the lens isn't put on correctly. None of those are issues (the memory card was present both occassions and not used to store images during the session and the camera was mounted to scope using t-ring).
Humidity/Dew was not an issue neither eveninig.
I also read the switch inside the battery housing can sometimes defect though it locks in the battery fine and I see no reason to suspect it isn't operating.
Please someone tell me I didn't get a jacked up camera!!!

An update on the issue as it has happened agian on the replacement (brand new) camera....
The camera was operating fine; I snapped several images of the moon before getting the scope aligned. Towards the end of my moon session I attempted five sequences at different exp/iso settings. Only three images were returned to the program I was using (Backyard EOS).
I did not think anything about it at the time and attempted another run of five shots at different exp/iso settings. Again, only three images were returned. But, not thinkin anything about only getting three out of five, I proceeded to move to a star cluster to have my first attempt at a star field.
The idea was to capture a one-minute exposure. However, as my setting was on M the program instructed me that I needed to change to B (I knew this, just forgot). While the camera was connected to the program, I changed the setting to B. This is when the program stopped responding. I went to check the camera (perhaps battery died). The LCD was on, battery was 3/4 charged. So I went back to the program and told it to connect. It made a long attempt but after several minutes never established a connection.
I then shut down the program and turned the camera off thinking I should reboot. However, when I attempted to turn the camera back on I got no response. Same issue as the last one. The program could not open a connection.
And now I have a second brand new non-working camera.
This is a segment of the program log from when the issues began till I shut down the program. What stands out are the out of memory errors which I would imagine in hindsight is why I never got all five images both occasions. The second is the StateEvent_Shutdown Fired which to my understanding cannot be invoked by the software. Then, after what seems like a potential successful connection at 21:34:13,952, it shows EDS_ERR_MEM_ALLOC_FAILED. I've emphasized (bolded) those points in the log near the end.
Desperately seeking some type of resolution to get my camera back on...
Start of log:
2013-08-11 21:32:03,942 [Main] INFO - Imaging session started.
2013-08-11 21:32:04,404 [Main] INFO - -----------------------------------
2013-08-11 21:32:04,404 [Main] INFO - Application state changed: 'ImageCaptureBusySessionPlan'
2013-08-11 21:32:04,404 [Main] INFO - Camera action fired: 'ValidateCapturePlan'
2013-08-11 21:32:04,420 [Main] INFO - CameraPropertyChangedArgs fired: ImageQuality = 'IMAGE_RLF+'
2013-08-11 21:32:04,867 [20] INFO - Temp folder: C:\Users\timtrice\Dropbox\Pictures\BackyardTEMP
2013-08-11 21:32:04,873 [20] INFO - Download folder: C:\Users\timtrice\Dropbox\Pictures\Astrophotography
2013-08-11 21:32:04,890 [CameraTakePictureOnMessageRecieved] INFO - Running: EDSDK.EdsGetPropertyData(CameraRef, BatteryLevel(8), 0, size(4), intPtr)
2013-08-11 21:32:04,890 [CameraTakePictureOnMessageRecieved] INFO - CameraPropertyChangedArgs fired: MirrorLock = 'On'
2013-08-11 21:32:04,943 [CameraTakePictureOnMessageRecieved] INFO - CameraPropertyChangedArgs fired: AeMode = 'MANUAL'
2013-08-11 21:32:04,950 [CameraTakePictureOnMessageRecieved] INFO - CameraPropertyChangedArgs fired: Tv = '2"'
2013-08-11 21:32:04,960 [CameraTakePictureOnMessageRecieved] INFO - CameraPropertyChangedArgs fired: Av = ''
2013-08-11 21:32:04,972 [CameraTakePictureOnMessageRecieved] ERROR - Make sure camera is set to BULB, turn dial to 'B'
2013-08-11 21:32:04,972 [CameraTakePictureOnMessageRecieved] ERROR - at BinaryRivers.Camera.Canon.CameraModel.SetDialBulb()
at BinaryRivers.Camera.Canon.CameraModel.<>c__DisplayClass3f.<CameraTakePictureOnMessageRecieved>b__3e()
2013-08-11 21:32:04,979 [CameraTakePictureOnMessageRecieved] INFO - Imaging session cancelled
2013-08-11 21:32:04,985 [CameraTakePictureOnMessageRecieved] INFO - Make sure camera is set to BULB, turn dial to 'B'
2013-08-11 21:32:04,985 [CameraTakePictureOnMessageRecieved] ERROR - Make sure camera is set to BULB, turn dial to 'B'
2013-08-11 21:32:04,985 [CameraTakePictureOnMessageRecieved] ERROR - at BinaryRivers.Camera.Canon.CameraModel.SetDialBulb()
at BinaryRivers.Camera.Canon.CameraModel.<>c__DisplayClass3f.<CameraTakePictureOnMessageRecieved>b__3e()
2013-08-11 21:32:06,835 [Main] INFO - -----------------------------------
2013-08-11 21:32:06,835 [Main] INFO - Application state changed: 'ImageCapture'
2013-08-11 21:32:06,870 [Main] INFO - Imaging session cancelled
2013-08-11 21:32:06,882 [Main] INFO - CameraPropertyChangedArgs fired: ImageQuality = 'IMAGE_RLF+'
............................................................. some pieces edited here .......................................................................
2013-08-11 21:33:26,549 [Main] INFO - Running: EDSDK.EdsSetPropertyEventHandler(_cameraRef, EDSDK.PropertyEvent_All, null, IntPtr.Zero)
2013-08-11 21:33:26,549 [Main] INFO - Running: EDSDK.EdsSetCameraStateEventHandler(_cameraRef, EDSDK.PropertyEvent_All, null, IntPtr.Zero)
2013-08-11 21:33:26,549 [Main] INFO - Running: EDSDK.EdsSetObjectEventHandler(_cameraRef, EDSDK.PropertyEvent_All, null, IntPtr.Zero)
2013-08-11 21:33:26,549 [Main] INFO - Running: EDSDK.EdsCloseSession(_cameraRef)
2013-08-11 21:33:26,549 [Main] INFO - WARNING EDS_ERR_COMM_DISCONNECTED : EDSDK.EdsCloseSession(_cameraRef)
2013-08-11 21:33:26,549 [Main] INFO - Running: EDSDK.EdsRelease(_cameraRef)
2013-08-11 21:33:26,549 [Main] INFO - WARNING EDS_ERR_INTERNAL_ERROR : EDSDK.EdsRelease(_cameraRef)
2013-08-11 21:33:26,549 [Main] INFO - CAMERA IS DISCONNECTED!
2013-08-11 21:33:26,549 [Main] INFO - Camera state changed: 60D = 'Disconnected'
2013-08-11 21:33:27,047 [Main] INFO - -----------------------------------
2013-08-11 21:33:27,047 [Main] INFO - Application state changed: 'Disconnected'
2013-08-11 21:33:27,048 [Main] INFO - Camera state changed: 'Disconnected'
2013-08-11 21:33:27,509 [Main] INFO - -----------------------------------
2013-08-11 21:33:27,509 [Main] INFO - Application state changed: 'Disconnected'
2013-08-11 21:33:27,509 [Main] ERROR - ERROR EDS_ERR_INTERNAL_ERROR : EDSDK.EdsOpenSession(_cameraRef)
2013-08-11 21:33:27,510 [Main] ERROR - at BinaryRivers.Camera.Canon.CameraController.RunAndThrow(Func`1 function, String info)
at BinaryRivers.Camera.Canon.CameraController.Connect(String usbport)
at BinaryRivers.Orchestrator.MaestroCameraDslrExtension.CameraConnect(Maestro maestro, String drivername, Boolean postchoose)
2013-08-11 21:34:13,207 [Main] INFO - -----------------------------------
2013-08-11 21:34:13,207 [Main] INFO - Application state changed: 'Connecting'
2013-08-11 21:34:13,250 [Main] INFO - Attempting to connect camera...
2013-08-11 21:34:13,257 [Main] INFO - Camera action fired: 'MaestroChoose'
2013-08-11 21:34:13,261 [Main] INFO - Camera state changed: 'Disconnected'
2013-08-11 21:34:13,753 [Main] INFO - -----------------------------------
2013-08-11 21:34:13,753 [Main] INFO - Application state changed: 'Disconnected'
2013-08-11 21:34:13,753 [Main] INFO - Running: EDSDK.EdsGetCameraList(out cameraListRef)
2013-08-11 21:34:13,753 [Main] INFO - Running: EDSDK.EdsGetChildCount(cameraListRef, out cameraCount)
2013-08-11 21:34:13,753 [Main] INFO - Running: EDSDK.EdsGetChildAtIndex(cameraListRef, 0, out mCameraRef)
2013-08-11 21:34:13,753 [Main] INFO - Running: EDSDK.EdsGetDeviceInfo(mCameraRef, out mDeviceInfo)
2013-08-11 21:34:13,753 [Main] INFO - Canon EOS 60D FOUND!
2013-08-11 21:34:13,758 [Main] INFO - Checking IsEosUtilityRunning()
2013-08-11 21:34:13,951 [Main] INFO - EOS Utility is not running!
2013-08-11 21:34:13,951 [Main] INFO - Running: EDSDK.EdsGetCameraList(out cameraListRef)
2013-08-11 21:34:13,952 [Main] INFO - Running: EDSDK.EdsGetChildCount(cameraListRef, out cameraCount)
2013-08-11 21:34:13,952 [Main] INFO - Running: EDSDK.EdsGetChildAtIndex(cameraListRef, 0, out mCameraRef)
2013-08-11 21:34:13,952 [Main] INFO - Running: EDSDK.EdsGetDeviceInfo(mCameraRef, out mDeviceInfo)
2013-08-11 21:34:13,952 [Main] INFO - Canon EOS 60D FOUND!
2013-08-11 21:34:13,952 [Main] INFO - Registered IsSupport.Bulb
2013-08-11 21:34:13,952 [Main] INFO - Registered IsSupport.Liveview
2013-08-11 21:34:13,952 [Main] INFO - Registered IsSupport.MirrorLockOverUsb
2013-08-11 21:34:13,952 [Main] INFO - Camera 'Canon EOS 60D' is connected; model '287', protocol '2'.
2013-08-11 21:34:13,952 [Main] INFO - Port '\\?\usb#vid_04a9&pid_3215#6&13879db6&0&1#{6ac27878-a6fa-4155-ba85-f98f491d4f33}'
2013-08-11 21:34:13,952 [Main] INFO - Running: EDSDK.EdsOpenSession(_cameraRef)
............................................................. some pieces edited here .......................................................................
2013-08-11 21:34:14,169 [Main] INFO - Running: EDSDK.EdsSetPropertyEventHandler(_cameraRef, EDSDK.PropertyEvent_All, null, IntPtr.Zero)
2013-08-11 21:34:14,169 [Main] INFO - Running: EDSDK.EdsSetCameraStateEventHandler(_cameraRef, EDSDK.PropertyEvent_All, null, IntPtr.Zero)
2013-08-11 21:34:14,169 [Main] INFO - Running: EDSDK.EdsSetObjectEventHandler(_cameraRef, EDSDK.PropertyEvent_All, null, IntPtr.Zero)
2013-08-11 21:34:14,169 [Main] INFO - Running: EDSDK.EdsCloseSession(_cameraRef)
2013-08-11 21:34:14,169 [Main] INFO - WARNING EDS_ERR_COMM_DISCONNECTED : EDSDK.EdsCloseSession(_cameraRef)
2013-08-11 21:34:14,169 [Main] INFO - Running: EDSDK.EdsRelease(_cameraRef)
2013-08-11 21:34:14,170 [Main] INFO - WARNING EDS_ERR_MEM_ALLOC_FAILED : EDSDK.EdsRelease(_cameraRef)
2013-08-11 21:34:14,170 [Main] INFO - CAMERA IS DISCONNECTED!
2013-08-11 21:34:14,170 [Main] INFO - Camera state changed: 60D = 'Disconnected'
2013-08-11 21:34:14,630 [Main] INFO - -----------------------------------
2013-08-11 21:34:14,630 [Main] INFO - Application state changed: 'Disconnected'
2013-08-11 21:34:14,631 [Main] INFO - Camera state changed: 'Disconnected'
2013-08-11 21:34:15,086 [Main] INFO - -----------------------------------
2013-08-11 21:34:15,086 [Main] INFO - Application state changed: 'Disconnected'
2013-08-11 21:34:15,086 [Main] ERROR - ERROR EDS_ERR_INTERNAL_ERROR : EDSDK.EdsOpenSession(_cameraRef)
2013-08-11 21:34:15,086 [Main] ERROR - at BinaryRivers.Camera.Canon.CameraController.RunAndThrow(Func`1 function, String info)
at BinaryRivers.Camera.Canon.CameraController.Connect(String usbport)
at BinaryRivers.Orchestrator.MaestroCameraDslrExtension.CameraConnect(Maestro maestro, String drivername, Boolean postchoose)
2013-08-11 21:34:23,360 [Main] INFO - Camera state changed: 'Disconnected'
2013-08-11 21:34:23,824 [Main] INFO - -----------------------------------
2013-08-11 21:34:23,824 [Main] INFO - Application state changed: 'Disconnected'

IPod went quiet

My 2.5 year old iPod shuffle, which I got when they first came out, had a little run-in with my pants pocket and the washing machine. When it was found, I looked at it and it was fine, connected to my computer; it was fine, and hooked it up to small headphones and my iPod speaker system and it worked fine. In fact, that night, I listened to it while I was cleaning. Then, within a week, it began to act strangely. The up volume button stopped working, and the volume remained at a semi-silent level. Also, the iPod found it hard to keep a charge, so I had to connect it to the computer before using it, or else it would become a flash drive. I've played around with the volume controls in iTunes, but it didn't work. Is there a cure, or is it time to upgrade to the new iPod shuffle?
Dell Dimension 4700C Windows XP

Shuffles have gone through the laundry before and many have survived the experience just fine; that said, it's not something that it's built to do and not something that you can count on.
Yours is getting on in years (not 2.5 years, of course - it came out following MWE '05) and it's possible that what you're seeing has nothing to do with the bath it took. However, your volume control symptom would make me believe otherwise.
In your place, I would commit to getting a new Shuffle, either a refurbed 1G for right now or one of the brand-new 2G's as soon as they start shipping, and I'd continue using the crippled one as long as I could. At some point I'd start to try to recover full use of it, or as much as possible. My steps would be something like the following:
a) Remove the switch cover (just pop it off with a knife tip, something like an X-acto works great). Remove the earbuds and USB cap.
b) Make up a bath of lukewarm distilled water and submerge the Shuffle in it. Let it sit for a while, swish it around; don't be too gentle with it.
c) Exercise the switch gently (plastic toothpick with do to engage it) while it's in the bath; just a couple or three times should be enough.
d) Remove and drain it thoroughly on paper towels, then place in a drying location for a good while. I'd use an oven with just the light on, which should give you a temp in the 75-80 range. I'd leave it there, untouched, for at least a day.
e) Pop the switch cover back on and give it a try.
f) There are a few things beyond that, including trying an electronics cleaner and physically banging the Shuffle around a bit to either dislodge or re-connect things (this sometimes does work, surprisingly).

Re: Complaint Against SONY MOBILES INDIA

I have bought Sony Xperia Z1 in Feb 2014 from Mobile World, Mumbai. It had the IMEI No.
But due to some problems the same has got replaced in warranty period in somewhere around end of July 2014 or start of August 2014. So I got a new set having IMEI NO.
I faced some more problems with my phone and I submitted my phone (to Nehal Techno Services, Ajmer) on 24th March 2015 and got the device back on 7th April 2015, The Job No. is B1W115031901379.
Then again I faced some more problems with my phone and I got my phone serviced by Best Techno services, Jaipur on 20th June 2015. The Job No. is W115062001922.
But now I was still facing some problems which were fixed in Job No. B1W115031901379 (The USB Cap is loose again and not being closed properly) and in Job No. W115062001922 (While talking on the phone the receiver is not getting my voice properly, there is some issue with microphone.)
As both those issue are covered in the 90 days service bill warranty of Job No. B1W115031901379 and Job No. W115062001922. So I submitted my phone as per the instructions of Xperia Customer Care executive. And got a new Job ID- W115062703704 on 27 June 2015.
But The Sony Service centre rejected the Job saying they will not fix it free of charge without the original Bill even though the claim of free repairs is against the Service Bill warranty (not the Phone Warranty).
I again talked to the Xperia Customer Care executive and he suggested to email this issue to you.
Even though when I replaced my Phone in warranty period, I gave a copy of the bill to the Sony Service centre(Nehal Techno Services, Ajmer), they said that they don’t have the copy. However they keep a scan copy of bill and upload it with the Job sheet to keep control of the same. But when I asked about this, they said they don’t have any copy of the bill.
I misplaced my original bill but as my phone is already out of warranty so that should not be any issue now.
And now that my Phone was replaced in warranty period so I got new Bill of the Phone as the New IMEI has been given to me with the replaced Phone. They have record of the same.
My concern is that I should be given free service for the Problems which they fix in previous service Jobs of which 90 days is not yet lapsed. But the service centre is denying and saying that without the Bill they will not provide free service. Even when(I am Quoting again) the claim of free repairs is against the Service Bill warranty (not the Phone Warranty).
Dear Sir, I have been using Sony Products for last 7 years. And I love Sony Products because of the quality and customer service. But this kind of behavior will just kill my aspirations to use sony products in near future. I got my phone repaired through Sony Service centre only so I can get service satisfaction but this incident is making me nervous of using sony service.
Dear Sir , Please look into this matter and please resolve this issue and please provide me free service for this product.
name- Anshul Somani

I am not sure if Sony staff reads this or not OR if this forum is country specific. Even if they do, its just a forum so each and every thread doesnt get response. Your issue needs to be raised with Sony India or may be there are consumer associations in India that can help you.

USB CAP /COVER

Similar Messages

Maybe you are looking for