USB capture device?

I've been looking for a usb capture device with either component or hdmi inputs and outputs a 16:9 aspect ration for my macbook and haven't found anything... anybody know of anything???

Was just looking for the same thing, I just need to capture from component. Found this from Blackmagic Design,
http://www.bhphotovideo.com/bnh/controller/home?O=cart&A=details&Q=&sku=558914&i s=REG
Hope it helps!

Similar Messages

  • Fmle TURN OFF WHEN I CHOOSE USB CAPTURE DEVICE

    USING WINDOWS 7 64 BIT SOFTWARE when i turn on fmle it comes on and uses the built in webcam on the computer but when i switch to the usb capture device it turns off. ANY ONE KNOW HOT TO FIX THIS

    Gen2ly wrote:
    This is the rule I think eldragon is talking about:
    http://wiki.archlinux.org/index.php/Syn … _detection
    if it is, it doesn't work for me anymore either.  Not sure why.
    I did it before posted there. Any ideas?

  • Premiere Elements doesn't see my Siig USB capture device.

    The topic heading pretty much say's it all. My webcam shows up as a capture device, but not my Siig. I don't remember the model of the Siig and it's not printed on the device, but it was cheap ($29). However, the crappy capture software that came with it sees it fine, as does Windows Media Encoder. So, why not Premiere Elements?

    "Premiere Elements doesn't capture video over a USB connection"
    I'm a bit surprised by that, but it would perfectly explain what I'm experiencing. Thanks.

  • HDMI USB capture device

    Does anyone know which USB HDMI capture devices are supported with Skype? I have already learned that a device needs a UVC driver for it to work. (USB video class) but most products dont have this information in their spec sheet. I already mailed Elgato about their HDMI USB capture products and they responded that the video can only be pulled into their application and other applications such as Skype would not detect it as a video source. Does anyone have a confirmed solution? It needs to be a USB solution so internal capture cards are not an option. And I cant exactly go buying stuff left and right and returning it before finding something that works. Greetings,

    Was just looking for the same thing, I just need to capture from component. Found this from Blackmagic Design,
    http://www.bhphotovideo.com/bnh/controller/home?O=cart&A=details&Q=&sku=558914&i s=REG
    Hope it helps!

  • USB Capture device driver

    Hi,
    I have written a user space USB driver for our Enciris LT101 video capture board using libusb.
    Now I want to make the device appear in Video Device list and access it through quicktime. Is it possible to write a "virtual driver" using quicktime component or any other mechanism to make the device appear in video device list?
    PS: I did the same under windows writing a directshow source filter and hacking the interfaces in the right way so that the device appears as if I have used AVStream kernel mode driver.
    Thanks, Malik

    Thanks for feedback,
    That is already a start. I am indeed searching of keywords like "Sequence Grabber".
    Do you know if I can grab already compressed video with that interface?
    Is there another way to enumerate and present devices in QuickTime available "device list" that will also work for 64 bit?
    I heard about macam driver...

  • Help usb capture decives that work with FME ?

    I have tried both the Dazzle dvd 100 and the pinnacle PCTV HD
    pro stick and neither of them work properly, mostly give video but
    no audio. has anyone tested and got a usb capture device working
    with media encoder? if so what device and how

    avidvid, thank you for you advice. I did check the system profiler and the device is
    recognized, but to no avail. In fact it is getting worse. When I initiate log and
    capture I can hear the transport working. It is moving all the time even though
    the capture window is now only showing the color bars. The "beach ball" is now
    constantly whirling and will only stop when the "deck" is turned of at the source.
    I am worried that I have messed up the reinstall. I am really not sure how much
    "stuff" I must remove from the system, or whether to reinstall the entire suite.
    Thanks again for your trouble.

  • Help- usb capture board and FME

    I have tried both the Dazzle dvd 100 and the pinnacle PCTV HD
    pro stick and neither of them work properly, mostly give video but
    no audio. has anyone tested and got a usb capture device working
    with media encoder? if so what device and how

    That you need is set the property node of the image display to make it visible or invisible. This an example
    Attachments:
    CapturaCamara.vi ‏62 KB

  • Capturing Hi8 Tapes - My capture device is USB or S-Vid / Component Out.  Will Premier Pro CS6 Recognize this device?

    AVerMedia DarkCrystal HD Capture SDK Video Capture Device.   I'm trying to capture the video uncompressed so I retain as much resolution as possible.  I can edit to other formats from there later.  I'll be playing these tapes from the camera.
    Link:
    B&H Photo Video
    Product description says:
    Third Party Software Support
      The DarkCrystal HD Capture SDK is designed to provide interoperability with a number of widely used video editing, encoding, streaming, and playback applications found on the Windows platform. These include:
    Adobe Premiere Pro CS6
    Sony Vegas Pro 10
    Windows Media Encoder 9
    GraphEdit
    AMCap
    Adobe Flash Media Live Encoder 3
    Corel VideoStudio
    CyberLink PowerDirector
    CyberLink PowerProducer
    Real Producer (v13)
    VLC Media Player
    Image J

    No version of Premiere (Pro or Elements) will work with ANY device that does not connect to a Firewire port
    EXCEPT... you may buy a card (I think Blackmagic is one) and then use the device driver supplied by the vendor to "link" the card to Premiere (I did this back in 2002 with a Pinnacle DV500 card)
    Premiere will NOT work with a USB device... as I said above... you may use a TI chip for adding a firewire card http://forums.adobe.com/thread/940242 to then use something like a Grass Valley product

  • Usb video capture device software

    i have a usb video capture device and i wanted to know if there was a program that lets you watch your vhs movies with it on your computer

    Not totally following you here.
    You can get an adapter that allows you to plug, say, your VCR into the computer to copy video from a VHS to a DVD, and have it edited on the computer, is that what you are looking for?
    My opinions are mine, and mine alone.

  • Opinions on low cost USB video capture devices for FMLE?

    I have already tried a few such devices.  I would at least like to achieve reasonable SD at 720 X 480.  HD would be a plus, but not necessary.  My camera has HDMI, SDI, and Component and composit out.  I have already tried a couple of capture devices, and the results were as follows. 
    SIIG USB 2.0 Video Capture Device - JU-AV0012-S1
    Pretty clear as to why this was so cheap.  It claims full NTSC support, but that is only on the input.  Output is 320 X 240 only. 
    DIAMOND USB 2.0 HD Game Console Video Capture Device GC500 USB 2.0 Interface
    Again, this unit claims "HD" but that is only on the input.  Output is 640 x 480.  The image quality was terrible with the supplied software, or with Adobe FMLE.  Noisy, and well below full NTSC quality.  Even when fed with the component out of a Sony NX5.  Unacceptable.  Even for the bargain price at Frys. 
    Hauppauge HD PVR 2 Gaming Edition
    Seems I bought a dud.  I went back and forth with Hauppauge support, and never could get this to be detected by FMLE, or the included software.  On doing a search online for the error message I received, I discovered many similar trouble reports on various forums.  I bought this one at a discounted price.  Perhaps this is the reason why. 
    The notebook I have is a Windows unit, with no expresscard slot, or 1394 input (unfortunately).  I did look briefly at the Blackmagic Intesity Shuttle, but it needs USB 3.0.
    Curious to hear of any sucess with USB capture and FMLE, and with a device under (hopefully well under?)$200.

    I've been streaming with the ION Video2PC capture device...it works flawlessly with no problem. The machine I've been testing it on can only pump out 480p or 540p at the most. But, I'm sure if I used it on a faster machine I would get way better results. You can find them used under $30 bucks online and unlike most cheap capture/input devices, you can access the video and audio in FMLE. Just thought, I'd share they info.

  • USB vs. PCI capture devices

    Hey all, quick questions I hope someone can help me with:
    1. Are there significant differences between USB and PCI video capture devices [other than the one is USB, the other PCI] which would make one better than the other in terms of performance?
    2. Is there a way to buffer the incoming video from a capture device [in my case, a USB video grabber device] so that when recording the video and streaming it simultaneously, you don't get choppy video and slow framerate?
    Thanks in advance for any help...

    Sorry about the correction: in question 2 I mean I'm trying to monitor the incoming stream and record it to the HDD at the same time...sorry for any confusion...

  • Can't get driver to work with ezcap usb 2.0 video capture device on windows 8.1

    I have an ezcap video capture device that works fine on my windows 7 machine but will not work in windows 8.1. The software (arcsoft 3.5)  functions properly but will not let me select the video grabber as a source. The driver itself indicates not compatible with 8.1 and the there are no drivers out there that I can find to address this issue? Any known solution would be helpful.

    Hi,
    It is not from HP. Please try driver from the following link:
        http://www.ezcap.tv/ezcap116-drivers?zenid=r53fvgj1n510tdme9itqc9ql52
    (After the first screen shot).
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Unable to initialize capture device and device control in HDV

    I shot with a Sony HVR-Z1U/Z1N and am using a Sony HDV 1080i tape deck to digitize.
    I recently purchased a MacBook Pro and installed FCP Pro 5 on it. After getting over some time code issues we were chugging along, when on the 4th tape the image on the log and capture screen suddenly dissapeared (I could get audio and could see the image on the tape deck). Well after taking the tape out, checking and rechecking it I popped it back in and ever since then, I have been getting this error mssg "Unable to initialize capture device and device control."
    I have tried deleting the preferences and starting from scratch. If I do that, and choose the easy setup with HDV- 1080i60, it gives me this error "Unable to locate the following external devices- HDV (1440 X 1080) 30fps.
    I upgraded to FCP 5.1.2 this morning and upgraded the OS to 10.4.7 and QT to 7.1.3 and still no change.
    Im at my wits end, Ive been working on this for a whole week now.
    Thank you,
    Bugs

    It has been reported to take more than one attempt to correct the installation but, if properly executed on a machine without other system problems, the QT reinstall process does work. The key element here is you must reinstall QT after you trash the receipts. The process is listed below.
    x
    To do a full quicktime reinstall.
    Go to /library/receipts and delete any files that say Quicktime followed by a number e.g. Quicktime703.pkg
    Go to the Apple quicktime site and download the appropriate version of Quicktime to your hard drive.
    Run the Quicktime installer.
    Repair Disk Permissions for your System Disk (Disk Utility > Select the system disk > Repair Disk Permissions)
    Reboot
    If this doesn't work, then the problem lies elsewhere:
    1. your system - user preferences, firewire ports or other system elements.
    2. your equipment - camera/deck/firewire cables.
    3. your process - not setting up the software properly or using the software erroneously.
    Listed below is a troubleshooting process. Not all steps are appropriate but the general process of isolating the problem is useful.
    Troubleshooting Steps for OS X
    by Jan Johannsen (Collected from: Apple>User Tips Library>User Tips Contributions forum)
    FIRST AID
    01 Completely shutdown, wait a 5 minutes, restart
    02 Make sure you're not running out of free space on the System volume
    03 Check/fix the filesystem using Disk Utility &/or Diskwarrior
    04 Repair permissions using Disk Utility
    05 Create a new user account, and see if the problem persists there
    06 Clear system & user caches
    07 Run FCP Rescue
    08 Unplug all USB, Firewire devices except Apple mouse
    09 Startup in SafeBoot mode, and see if the problem persists there
    10 Reset system firmware
    MORE SERIOUS TROUBLESHOOTING
    11 Reapply the latest combo updater
    12 Run the Apple hardware diagnostic CD
    13 Check the hard drive for bad blocks
    14 Take out 3rd party RAM
    15 Unplug 3rd Party PCI cards
    16 Reset PMU
    17 Archive and reinstall the OS
    18 Reinstall the system from scratch
    19 Send the machine back to Apple

  • Video capture device Plextor PX-AV200U doesn't work

    Hello there.
    This is the last piece of HW that I still didn't manage to work with linux. I bought it few years ago, when I used windows and I'm trying to make it work since I started to use linux 3 years ago.
    My dmesg output is:
    usb 1-10: new high speed USB device using ehci_hcd and address 10
    em28xx: New device USB 2821 Device @ 480 Mbps (eb1a:2821, interface 0, class 0)
    em28xx #0: chip ID is em2820 (or em2710)
    em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 21 28 90 00 11 03 6a 22 00 00
    em28xx #0: i2c eeprom 10: 00 00 04 57 06 21 01 00 00 00 00 00 00 00 00 00
    em28xx #0: i2c eeprom 20: 02 00 01 01 f0 10 00 00 00 00 00 00 5b 00 00 00
    em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 01 03 01 00 00 00 00
    em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 22 03 55 00 53 00
    em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 32 00 31 00 20 00 44 00
    em28xx #0: i2c eeprom 80: 65 00 76 00 69 00 63 00 65 00 00 00 00 00 00 00
    em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x37da7b8a
    em28xx #0: EEPROM info:
    em28xx #0: AC97 audio (5 sample rates)
    em28xx #0: 500mA max power
    em28xx #0: Table at 0x04, strings=0x226a, 0x0000, 0x0000
    em28xx #0: Identified as Unknown EM2750/28xx video grabber (card=1)
    em28xx #0: found i2c device @ 0x4a [saa7113h]
    em28xx #0: found i2c device @ 0xa0 [eeprom]
    em28xx #0: Your board has no unique USB ID and thus need a hint to be detected.
    em28xx #0: You may try to use card=<n> insmod option to workaround that.
    em28xx #0: Please send an email with this log to:
    em28xx #0: V4L Mailing List <[email protected]>
    em28xx #0: Board eeprom hash is 0x37da7b8a
    em28xx #0: Board i2c devicelist hash is 0x6ba50080
    em28xx #0: Here is a list of valid choices for the card=<n> insmod option:
    em28xx #0: card=0 -> Unknown EM2800 video grabber
    em28xx #0: card=1 -> Unknown EM2750/28xx video grabber
    em28xx #0: card=2 -> Terratec Cinergy 250 USB
    em28xx #0: card=3 -> Pinnacle PCTV USB 2
    em28xx #0: card=4 -> Hauppauge WinTV USB 2
    em28xx #0: card=5 -> MSI VOX USB 2.0
    em28xx #0: card=6 -> Terratec Cinergy 200 USB
    em28xx #0: card=7 -> Leadtek Winfast USB II
    em28xx #0: card=8 -> Kworld USB2800
    em28xx #0: card=9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker / Kworld DVD Maker 2
    em28xx #0: card=10 -> Hauppauge WinTV HVR 900
    em28xx #0: card=11 -> Terratec Hybrid XS
    em28xx #0: card=12 -> Kworld PVR TV 2800 RF
    em28xx #0: card=13 -> Terratec Prodigy XS
    em28xx #0: card=14 -> SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0
    em28xx #0: card=15 -> V-Gear PocketTV
    em28xx #0: card=16 -> Hauppauge WinTV HVR 950
    em28xx #0: card=17 -> Pinnacle PCTV HD Pro Stick
    em28xx #0: card=18 -> Hauppauge WinTV HVR 900 (R2)
    em28xx #0: card=19 -> EM2860/SAA711X Reference Design
    em28xx #0: card=20 -> AMD ATI TV Wonder HD 600
    em28xx #0: card=21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder
    em28xx #0: card=22 -> EM2710/EM2750/EM2751 webcam grabber
    em28xx #0: card=23 -> Huaqi DLCW-130
    em28xx #0: card=24 -> D-Link DUB-T210 TV Tuner
    em28xx #0: card=25 -> Gadmei UTV310
    em28xx #0: card=26 -> Hercules Smart TV USB 2.0
    em28xx #0: card=27 -> Pinnacle PCTV USB 2 (Philips FM1216ME)
    em28xx #0: card=28 -> Leadtek Winfast USB II Deluxe
    em28xx #0: card=29 -> EM2860/TVP5150 Reference Design
    em28xx #0: card=30 -> Videology 20K14XUSB USB2.0
    em28xx #0: card=31 -> Usbgear VD204v9
    em28xx #0: card=32 -> Supercomp USB 2.0 TV
    em28xx #0: card=33 -> (null)
    em28xx #0: card=34 -> Terratec Cinergy A Hybrid XS
    em28xx #0: card=35 -> Typhoon DVD Maker
    em28xx #0: card=36 -> NetGMBH Cam
    em28xx #0: card=37 -> Gadmei UTV330
    em28xx #0: card=38 -> Yakumo MovieMixer
    em28xx #0: card=39 -> KWorld PVRTV 300U
    em28xx #0: card=40 -> Plextor ConvertX PX-TV100U
    em28xx #0: card=41 -> Kworld 350 U DVB-T
    em28xx #0: card=42 -> Kworld 355 U DVB-T
    em28xx #0: card=43 -> Terratec Cinergy T XS
    em28xx #0: card=44 -> Terratec Cinergy T XS (MT2060)
    em28xx #0: card=45 -> Pinnacle PCTV DVB-T
    em28xx #0: card=46 -> Compro, VideoMate U3
    em28xx #0: card=47 -> KWorld DVB-T 305U
    em28xx #0: card=48 -> KWorld DVB-T 310U
    em28xx #0: card=49 -> MSI DigiVox A/D
    em28xx #0: card=50 -> MSI DigiVox A/D II
    em28xx #0: card=51 -> Terratec Hybrid XS Secam
    em28xx #0: card=52 -> DNT DA2 Hybrid
    em28xx #0: card=53 -> Pinnacle Hybrid Pro
    em28xx #0: card=54 -> Kworld VS-DVB-T 323UR
    em28xx #0: card=55 -> Terratec Hybrid XS (em2882)
    em28xx #0: card=56 -> Pinnacle Hybrid Pro (2)
    em28xx #0: card=57 -> Kworld PlusTV HD Hybrid 330
    em28xx #0: card=58 -> Compro VideoMate ForYou/Stereo
    em28xx #0: card=59 -> (null)
    em28xx #0: card=60 -> Hauppauge WinTV HVR 850
    em28xx #0: card=61 -> Pixelview PlayTV Box 4 USB 2.0
    em28xx #0: card=62 -> Gadmei TVR200
    em28xx #0: card=63 -> Kaiomy TVnPC U2
    em28xx #0: card=64 -> Easy Cap Capture DC-60
    em28xx #0: card=65 -> IO-DATA GV-MVP/SZ
    em28xx #0: card=66 -> Empire dual TV
    em28xx #0: card=67 -> Terratec Grabby
    em28xx #0: card=68 -> Terratec AV350
    em28xx #0: card=69 -> KWorld ATSC 315U HDTV TV Box
    em28xx #0: card=70 -> Evga inDtube
    em28xx #0: card=71 -> Silvercrest Webcam 1.3mpix
    em28xx #0: card=72 -> Gadmei UTV330+
    em28xx #0: card=73 -> Reddo DVB-C USB TV Box
    em28xx #0: card=74 -> Actionmaster/LinXcel/Digitus VC211A
    em28xx #0: card=75 -> Dikom DK300
    em28xx #0: card=76 -> KWorld PlusTV 340U or UB435-Q (ATSC)
    em28xx #0: Config register raw data: 0x90
    em28xx #0: AC97 vendor ID = 0xffffffff
    em28xx #0: AC97 features = 0x6a90
    em28xx #0: Empia 202 AC97 audio processor detected
    em28xx #0: v4l2 driver version 0.1.2
    em28xx #0: V4L2 video device registered as video1
    em28xx audio device (eb1a:2821): interface 1, class 1
    Can't get any output, not even audio.
    I tried to find threads about similar eb1a:2821 cards, but none of those helped me.
    The only possible solution I found is patch, which also didn't help me yet, since I didn't manage to successfully apply it (well, I'm still bit newbie in such operations :-X).
    I use kernel-2.6.36-ARCH.
    Could anybody help me with this delicious problem?
    Regars,
    Michal

    Hi @PatDenis! Welcome to the BlackBerry Support Community Forums!
    Unfortunately, you need more memory to perform that task, you need a media card to be able to start  recording a video.  By the way, the 9720 is not a Bold (according to your profile), It's just BlackBerry 9720. Cheers!
    Record a video
    Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

  • Video capture device bad image/no sound

    Hi !!
    I bought this "grabby" usb dongle from terratec to record old vhs cassete on my computer, but is doesn't work on linux. (It works ok on win7, so cable-connections problems are excluded)
    On vlc I did 'open capture device', choose /dev/video0 for vid, hw:2,0 for sound(tried them all anyway), and PAL/SECAM video standard.
    Problem is I have a super crappy video image (on mplayer also), and no sound. The video is colored, I recogize it, but the pixels are huge, it's awfull.
    After some research I found that a module named em28xx is supposed to handle this device. I found some forum post here and there about the sound problem, it is addressed with a 3years old patch on em28xx-cards.c (which doesn't exist on my machine, so I couldn't apply it).
    Here is dmesg :
    [ 8371.430051] em28xx audio device (0ccd:0096): interface 2, class 1
    [ 8371.430074] em28xx audio device (0ccd:0096): interface 1, class 1
    [ 8371.438360] em28xx: New device TerraTec Electronic GmbH TerraTec Grabby @ 480 Mbps (0ccd:0096, interface 0, class 0)
    [ 8371.438363] em28xx: Video interface 0 found
    [ 8371.438365] em28xx: DVB interface 0 found
    [ 8371.438511] em28xx #0: chip ID is em2860
    [ 8371.554008] em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 96 00 50 00 11 03 9c 20 6a 32
    [ 8371.554020] em28xx #0: i2c eeprom 10: 00 00 06 57 0e 02 00 00 00 00 00 00 00 00 00 00
    [ 8371.554029] em28xx #0: i2c eeprom 20: 02 00 01 00 f0 10 01 00 00 00 00 00 5b 00 00 00
    [ 8371.554039] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00
    [ 8371.554048] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 8371.554057] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 8371.554067] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 32 03 54 00 65 00
    [ 8371.554076] em28xx #0: i2c eeprom 70: 72 00 72 00 61 00 54 00 65 00 63 00 20 00 45 00
    [ 8371.554086] em28xx #0: i2c eeprom 80: 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00 69 00
    [ 8371.554095] em28xx #0: i2c eeprom 90: 63 00 20 00 47 00 6d 00 62 00 48 00 20 03 54 00
    [ 8371.554104] em28xx #0: i2c eeprom a0: 65 00 72 00 72 00 61 00 54 00 65 00 63 00 20 00
    [ 8371.554114] em28xx #0: i2c eeprom b0: 47 00 72 00 61 00 62 00 62 00 79 00 48 00 00 00
    [ 8371.554123] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 8371.554133] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 8371.554142] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 8371.554151] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 8371.554163] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xd3498090
    [ 8371.554165] em28xx #0: EEPROM info:
    [ 8371.554166] em28xx #0: AC97 audio (5 sample rates)
    [ 8371.554167] em28xx #0: 500mA max power
    [ 8371.554170] em28xx #0: Table at 0x06, strings=0x209c, 0x326a, 0x0000
    [ 8371.554172] em28xx #0: Identified as Terratec Grabby (card=67)
    [ 8371.856372] saa7115 4-0025: saa7113 found (1f7113d0e100000) @ 0x4a (em28xx #0)
    [ 8372.495384] em28xx #0: Config register raw data: 0x50
    [ 8372.515361] em28xx #0: AC97 vendor ID = 0x83847650
    [ 8372.525227] em28xx #0: AC97 features = 0x6a90
    [ 8372.525231] em28xx #0: Empia 202 AC97 audio processor detected
    [ 8372.908213] em28xx #0: v4l2 driver version 0.1.3
    [ 8373.760714] em28xx #0: V4L2 video device registered as video0
    [ 8373.760718] em28xx #0: V4L2 VBI device registered as vbi0
    And lsmod :
    [user@OGwncMO ~]$ lsmod | grep em28xx
    em28xx 88986 0
    tveeprom 13809 1 em28xx
    videobuf_vmalloc 4351 1 em28xx
    videobuf_core 16231 2 videobuf_vmalloc,em28xx
    v4l2_common 5370 2 saa7115,em28xx
    videodev 100564 3 saa7115,em28xx,v4l2_common
    i2c_core 20508 7 i2c_i801,saa7115,em28xx,nvidia,v4l2_common,tveeprom,videodev
    usbcore 147434 10 uas,ath3k,btusb,snd_usb_audio,usb_storage,em28xx,snd_usbmidi_lib,ehci_hcd,usbhid,xhci_hcd
    From what I see my guess is that the module supposed to handle this hardware is present but doesn't do its job properly...any help?

    Hi again !
    Thanks for you tip nomorewindows. The programs tvtime and xawtv worked out of the box concerning video !! xawtv, however, crashes everytime I try to resize the (very) small window. As for tvtime, there is no sound (output is it can't open /dev/mixer so I guess it's fixable, I'll look into it).
    I started reading the doc but I didn't found yet if it was possible to record the output with these program...
    Concerning the cables, you are right they are not special at all it is standard : there is the triple (yellow=composite video, red/white for audio) cable and a fourth one for video but with inferior quality, I didn't connect it (it's either the yellow or this one for video)

Maybe you are looking for

  • Need to send a mail while safty stock goes down

    Dear experts, I Need to send a mail to concern persion while stock goes down from safty stock. We plan to put a check at the point of MARD table updation, Because we not able to put a check at the all transaction codes, So please LET ME KNOW HOW TO P

  • Disabling boot component validation in Bitlocker

    Since there's no easy way of figuring out why Bitlocker is going into recovery mode, we are considering disabling the boot component validation for Bitlocker and leverage only disk encryption. Either way, how can one disable the boot validation compo

  • How to handle discripency of stock

    we are into retail. i want to know how to handle following scenario. in case of stock transfers between stores and DC through creation of stock transfer request(UB) how to handle the discripency. for example store A sent 1000 qty of various article t

  • Library Full while Importing Images

    Just got my 1st iMac and trying the iPhoto. I try to import around 6,000 photos (3-4M each) to iphoto. During the import process, an error pop and said my library was full and the process stopped. (aound 5,000 photos were imported) After that, a mess

  • Queries union on the same Infocube

    Hi, We would like to built a report that requires a union of two queries based on the same Infocube? What are the best practices?    If possible, we would like to avoid to make this union in Bex Excel tool but rather in the BW (OLAP?) itself.   What