USB card in disk drive

Made a mistake, i put a USB card into the CD DVD slot, How can i get it out?

Do you mean a camera (SD?) card?
Power down your iMac, unplug it, and turn it with the CD drive slot pointing down - very gently move it/shake it to see if the card will fall out.

Similar Messages

TS1963 Migrating from Time Machine onExternal Disk, Why won't Migration Assistant see my USB Connected external disk drive?

I had to format my internal disk drive on my MacBook Pro, and reload Mountain Lion 10.8.3. The startup assistant could not see my external disk drive with the Time Machine backup files. After many tries I told it to skip restoring the files and let it boot up. I was able to see my 1 TByte external drive and could see the Time Machine files using Finder.
I started the Migration Assistant and told it to migrate from Time Machine Files on an external drive. It also did not see the backup drive. The only drive icon it showed was the Macintosh HD (my internal drive).
Isn't it supposed to show you the drive you are moving the files from? I tried starting it and it looked like it was going to try to migrate the files from the internal drive (to where I don't know, back to itselfl?) Or do I just not understand. Is it seeing the external drive, without identifying it (in the Migration Asst,)?
Really looks like it is going to back up the internal HD with files that are on the internal HD and not from Time Machine.
I need to restore my files and have been told I need to do so using Migration Assistant and not Time Machine.
Help pleae and soon, need to get my taxes finished!
Thanks!

I'm surprised that no one replied to this. But I learned a few things that may be helpful to some of you with this same question.
When you restore data from an external disk drive with Time Machine files on it. As you move through the dialog (in either System Startup or in the Migration Assistant) it will ask if you want to restore from an external disk with Time Machine files. If you select this option, it will show you only one Icon. You will expect to see your external disk drive listed as the source of the restore. The icon that is shown will look like your ilnternal drive and will be labeled something like Macintosh HD. That is not your internal drive, but is your backup drive. It is labeled the same as your internal disk drive and it is telling you that you have found the backup for your internal disk drive.
Would be nice if Apple would put a note of explanation about this as part of that dialog. I wasted several hours trying to make it work Finally I took a chance and selected the drive shown and it did restore my system. I ended up with two users since I did it from Migration Assistant. Had I done it from the System Startup, there would only be the one user.

Problem with USB External Hard Disk Drive

I have similar problem with hard disk MK6025GAS in Sweex casing connected via USB as Raistlfiren in this post but I am not sure if it has something to do with kernel. The problem is that when I plug the hard disk via USB it is not even shown with in /dev/ or by fdisk -l. I had similar problems with the drive before but it was always shown in /dev.
I got same output from dmesg as Raistlfiren in the post before
# dmesg | tail
sd 4:0:0:0: [sdd] ASC=0x0 ASCQ=0x0
sd 4:0:0:0: [sdd] Sense Key : 0x0 [current]
Info fld=0x0
I was browsing net for a lot of time to find a solution but nothing helped a lot. The problem is closes to the one described on Gentoo Forum
I can see that it is recognized by computer since it is shown with lsusb
# lsusb
Bus 001 Device 005: ID 13fd:0540 Initio Corporation
# lsusb -d 13fd:0540 -v
Bus 001 Device 005: ID 13fd:0540 Initio Corporation
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x13fd Initio Corporation
idProduct 0x0540
bcdDevice 0.00
iManufacturer 1 Initio
iProduct 2 MK6025GAS
iSerial 3 0010100500000000
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 2mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0001
Self Powered
From the beginning I though and I still think that the partition table is screwed up but the programs like TestDisk and fixdisktable work only with disks shown in /dev/
Additionally, I have checked the content of /var/log/kernel.log
Sep 16 22:03:58 hramat kernel: usb 1-2: new high speed USB device using ehci_hcd and address 5
Sep 16 22:03:58 hramat kernel: usb 1-2: configuration #1 chosen from 1 choice
Sep 16 22:03:58 hramat kernel: scsi4 : SCSI emulation for USB Mass Storage devices
Sep 16 22:03:58 hramat kernel: usb-storage: device found at 5
Sep 16 22:03:58 hramat kernel: usb-storage: waiting for device to settle before scanning
Sep 16 22:04:03 hramat kernel: scsi 4:0:0:0: Direct-Access Initio MK6025GAS 2.23 PQ: 0 ANSI: 0
Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: Attached scsi generic sg4 type 0
Sep 16 22:04:03 hramat kernel: usb-storage: device scan complete
Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] 117210240 512-byte hardware sectors: (60.0 GB/55.8 GiB)
Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Write Protect is off
Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Mode Sense: 86 0b 00 02
Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Assuming drive cache: write through
Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Assuming drive cache: write through
Sep 16 22:04:03 hramat kernel: sdd:<6>sd 4:0:0:0: [sdd] Sense Key : 0x0 [current]
Sep 16 22:04:03 hramat kernel: Info fld=0x0
Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] ASC=0x0 ASCQ=0x0
Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Sense Key : 0x0 [current]
and /var/log/errors.log
Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Assuming drive cache: write through
Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Assuming drive cache: write through
Sep 16 22:07:35 hramat kernel: INFO: task async/0:3957 blocked for more than 120 seconds.
Sep 16 22:07:35 hramat kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
The only thing I understand from these logs is that the disk is blocked, therefore not listed in /dev.
Assuming the newer kernel problems I could try to use some older live linux CD to see if that would work. I am also thinking of connecting this hard drive directly to my laptop, using live linux CD and maybe check the output of hdparm. Is there anything else I could check or try?
Thank you for any help or suggestions
Matej

Thank you nTia89 for response. Sorry for not providing enough information.
I believe the problem is not system dependent. I have dual boot with windows and there the disk has also problems. However, I do have Arch32 with Kernel 2.6.30, using Gnome. hal and dbus are also running.
I did not tried to connect the disk to the computer directly, I will try it today.
Yesterday I have used SystemRescueCD 0.4.1 with Kernel 2.6.22. I wanted to see if it will be recognized by the system and placed in /dev/. Yes it was. This means that the problem highlighted in Gentoo forum can be true, but it doesn't solve my problem. I have tried to connect the drive several times to Arch and it was not shown in /dev/sd*, in SystemRescueCD it was placed as /dev/sdb. Now I am sure that the partition table is screwed up.
So I have started to play with the drive in SystemRescueCD with TestDisk and FixDiskTable but without success.
% fdisk -l
Disk /dev/sda: 100.0 GB, 100030242816 bytes
255 heads, 63 sectors/track, 12161 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 1530 12289693+ 7 HPFS/NTFS
/dev/sda2 1531 6672 41303115 7 HPFS/NTFS
/dev/sda3 6673 12161 44090392+ f W95 Ext'd (LBA)
/dev/sda5 * 6673 11908 42058138+ 83 Linux
/dev/sda6 11909 12161 2032191 82 Linux swap / Solaris
Disk /dev/sdb: 60.0 GB, 60011642880 bytes
64 heads, 32 sectors/track, 57231 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
Disk /dev/sdb doesn't contain a valid partition table
Manufacturer disk geometry: Heads: 16; Cylinders: 16383; Sectors: 63; Logical Blocks (LBA): 117210240
TestDisk found only Linux partitions with 43Gb while disk had only one 60Gb partitioned with FAT32/NTFS.
Also recognized 64 heads, 57231 cylinders and 32 sectors (same as from fdisk -l), which obviously differs from manufacturer disk geometry.
testdisk.log:
Thu Sep 17 19:09:26 2009
Command line: TestDisk
TestDisk 6.8, Data Recovery Utility, August 2007
Christophe GRENIER
Linux version (ext2fs lib: 1.40.2, ntfs lib: 9:0:0, reiserfs lib: 0.3.1-rc8, ewf lib: none)
Using locale 'C'.
Hard disk list
Disk /dev/sda - 100 GB / 93 GiB - CHS 12161 255 63, sector size=512
Disk /dev/sdb - 60 GB / 55 GiB - CHS 57231 64 32, sector size=512
Disk /dev/sdb - 60 GB / 55 GiB
Partition table type: Intel
Interface Advanced
New options :
Dump : No
Cylinder boundary : Yes
Allow partial last cylinder : No
Expert mode : No
Analyse Disk /dev/sdb - 60 GB / 55 GiB - CHS 57231 64 32
Current partition structure:
Partition sector doesn't have the endmark 0xAA55
Ask the user for vista mode
Computes LBA from CHS for Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
Allow partial last cylinder : Yes
search_vista_part: 1
search_part()
Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
Search for partition aborted
Results
interface_write()
No partition found or selected for recovery
search_part()
Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
Search for partition aborted
Results
interface_write()
No partition found or selected for recovery
simulate write!
write_mbr_i386: starting...
Store new MBR code
write_all_log_i386: starting...
No extended partition
Analyse Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
Current partition structure:
Partition sector doesn't have the endmark 0xAA55
Ask the user for vista mode
Allow partial last cylinder : Yes
search_vista_part: 1
search_part()
Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
Results
interface_write()
No partition found or selected for recovery
search_part()
Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
NTFS at 8956/63/32
heads/cylinder 255 (NTFS) != 64 (HD)
sect/track 63 (NTFS) != 32 (HD)
filesystem size 24579387
sectors_per_cluster 8
mft_lcn 1024141
mftmirr_lcn 1650676
clusters_per_mft_record -10
clusters_per_index_record 1
NTFS part_offset=9392094720, part_size=12584646144, sector_size=512
NTFS partition cannot be added (part_offset<part_size).
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 34129 1 1 75201 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=69896224, size=84116272, end=154012495, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 34632 2 1 75704 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=70926400, size=84116272, end=155042671, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 34668 0 1 75740 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=71000064, size=84116272, end=155116335, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 34673 1 1 75745 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=71010336, size=84116272, end=155126607, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 34699 2 1 75771 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=71063616, size=84116272, end=155179887, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 34708 2 1 75780 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=71082048, size=84116272, end=155198319, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 36338 0 1 77410 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=74420224, size=84116272, end=158536495, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 36367 0 1 77439 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=74479616, size=84116272, end=158595887, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 36401 2 1 77473 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=74549312, size=84116272, end=158665583, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 36414 2 1 77486 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=74575936, size=84116272, end=158692207, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 37949 1 1 79021 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=77719584, size=84116272, end=161835855, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 37955 1 1 79027 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=77731872, size=84116272, end=161848143, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 37989 1 1 79061 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=77801504, size=84116272, end=161917775, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 38404 0 1 79476 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=78651392, size=84116272, end=162767663, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 39636 2 1 80708 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=81174592, size=84116272, end=165290863, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 41263 1 1 82335 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=84506656, size=84116272, end=168622927, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 41266 1 1 82338 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=84512800, size=84116272, end=168629071, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 41660 0 1 82732 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=85319680, size=84116272, end=169435951, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 42898 0 1 83970 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=87855104, size=84116272, end=171971375, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 43244 1 1 84316 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=88563744, size=84116272, end=172680015, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 44870 2 1 85942 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=91893824, size=84116272, end=176010095, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 44930 2 1 86002 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=92016704, size=84116272, end=176132975, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 46961 0 1 88033 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=96176128, size=84116272, end=180292399, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 47312 0 1 88384 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=96894976, size=84116272, end=181011247, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 48393 2 1 89465 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=99108928, size=84116272, end=183225199, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 49633 2 1 90705 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=101648448, size=84116272, end=185764719, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 50767 1 1 91839 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=103970848, size=84116272, end=188087119, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 51150 1 1 92222 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=104755232, size=84116272, end=188871503, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 51941 1 1 93013 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=106375200, size=84116272, end=190491471, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 52759 0 1 93831 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=108050432, size=84116272, end=192166703, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 53069 1 1 94141 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=108685344, size=84116272, end=192801615, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 53768 0 1 94840 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=110116864, size=84116272, end=194233135, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 54287 0 1 95359 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=111179776, size=84116272, end=195296047, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 54493 2 1 95565 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=111601728, size=84116272, end=195717999, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 54861 1 1 95933 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=112355360, size=84116272, end=196471631, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 54890 2 1 95962 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=112414784, size=84116272, end=196531055, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 54953 2 1 96025 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=112543808, size=84116272, end=196660079, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 56330 1 1 97402 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=115363872, size=84116272, end=199480143, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 56334 0 1 97406 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=115372032, size=84116272, end=199488303, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 57203 0 1 98275 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=117151744, size=84116272, end=201268015, disk end=117211136)
Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
Check the harddisk size: HD jumpers settings, BIOS detection...
The harddisk (60 GB / 55 GiB) seems too small! (< 103 GB / 95 GiB)
The following partitions can't be recovered:
D Linux 34129 1 1 75201 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 34632 2 1 75704 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 34668 0 1 75740 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 34673 1 1 75745 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 34699 2 1 75771 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 34708 2 1 75780 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 36338 0 1 77410 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 36367 0 1 77439 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 36401 2 1 77473 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 36414 2 1 77486 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 37949 1 1 79021 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 37955 1 1 79027 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 37989 1 1 79061 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 38404 0 1 79476 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 39636 2 1 80708 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 41263 1 1 82335 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 41266 1 1 82338 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 41660 0 1 82732 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 42898 0 1 83970 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 43244 1 1 84316 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 44870 2 1 85942 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 44930 2 1 86002 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 46961 0 1 88033 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 47312 0 1 88384 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 48393 2 1 89465 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 49633 2 1 90705 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 50767 1 1 91839 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 51150 1 1 92222 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 51941 1 1 93013 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 52759 0 1 93831 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 53069 1 1 94141 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 53768 0 1 94840 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 54287 0 1 95359 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 54493 2 1 95565 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 54861 1 1 95933 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 54890 2 1 95962 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 54953 2 1 96025 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 56330 1 1 97402 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 56334 0 1 97406 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 57203 0 1 98275 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
Results
interface_write()
No partition found or selected for recovery
simulate write!
write_mbr_i386: starting...
Store new MBR code
write_all_log_i386: starting...
No extended partition
Interface Advanced
Disk /dev/sdb - 60 GB / 55 GiB
Partition table type: Intel
Disk /dev/sdb - 60 GB / 55 GiB
Partition table type: Intel
New options :
Dump : No
Cylinder boundary : Yes
Allow partial last cylinder : No
Expert mode : No
New options :
Dump : No
Cylinder boundary : Yes
Allow partial last cylinder : No
Expert mode : No
Analyse Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
Current partition structure:
Partition sector doesn't have the endmark 0xAA55
Ask the user for vista mode
Allow partial last cylinder : No
search_vista_part: 0
search_part()
Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
Search for partition aborted
Results
Can't open backup.log file: No such file or directory
interface_load
interface_write()
No partition found or selected for recovery
simulate write!
write_mbr_i386: starting...
Store new MBR code
write_all_log_i386: starting...
No extended partition
TestDisk exited normally.
fixdisktable first output:
% ./fixdisktable -d /dev/sdb
Getting hard disk geometry
cylinders=57231, heads=64, sectors=32
end_offset: 2147482624
FfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSs
EXT2 partition at offset 56832, length=(41072.398 MB) 43067531264
Sectors: start= 111, end= 84116382, length= 84116272
Hd,Sec,Cyl: start(3,16,0) end(28,31,41072)
Done searching for partitions.
Nr AF Hd Sec Cyl Hd Sec Cyl Start Size ID
1 80 3 16 0 63 32 1023 111 84116273 83 (Interpretted)
1 80 3 16 0 63 224 255 111 84116273 83 (RAW)
1: 8003 1000 833f e0ff 6f00 0000 3183 0305
2: 0000 0000 0000 0000 0000 0000 0000 0000
3: 0000 0000 0000 0000 0000 0000 0000 0000
4: 0000 0000 0000 0000 0000 0000 0000 0000
Do you wish to write this partition table to disk (yes/no)? no
fixdisktable second output:
% ./fixdisktable -d -r -v /dev/sdb
Getting hard disk geometry
cylinders=57231, heads=64, sectors=32
end_offset: 2147482624
FfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSs
NTFS partition at offset 17483776, length=(17592186043512.582 MB) 184467440727622 49216
Sectors: start= 34148, end=36028797017147916, length=36028797017113768
Hd,Sec,Cyl: start(43,5,16) end(16,12,2096265)
Done searching for partitions.
Nr AF Hd Sec Cyl Hd Sec Cyl Start Size ID
1 80 43 5 16 63 32 1023 34148 -1850199 07 (Interpretted)
1 80 43 5 16 63 224 255 34148 -1850199 07 (RAW)
1: 802b 0510 073f e0ff 6485 0000 a9c4 e3ff
2: 0000 0000 0000 0000 0000 0000 0000 0000
3: 0000 0000 0000 0000 0000 0000 0000 0000
4: 0000 0000 0000 0000 0000 0000 0000 0000
Do you wish to write this partition table to disk (yes/no)? no
This string "FfEeSsNnBbUu" was repeating there for longer time and it was most probably related to debugging or a verbose mode of fixdisktable
As I have mentioned I will try to connect the disk directly to the computer and see what will happen.
Shall I try to correct the disk geometry to the one specified by manufacturer? Is it possible?
Any suggestions?

Installing windows 7 with usb 3 external disk drive crashes

So I was trying to install my windows 7 64bit onto my macbook pro. I bought an external Samsung CD/DVD RW drive to load the windows disk. However, halfway through the windows 7 install, it freezes at 65%. The most I could gather is that windows 7 doesn't have the drivers for the USB 3 ports on my mac, and therefore can't find the windows disk mid-install. Is there a way around this, maybe turning off the USB 3 abilities in some way?

nevermind turns out the install disk was flawed

Connecting PC to USB Disk Drive on USB Hub

I have set up a USB Hub on the Airport Extreme, the hub has a USB printer and a USB 250 GB Disk Drive.
The iMac has wireless access to both the printer (bonjour) and the disk drive, as well as shared files from the PC.
The PC has access to the internet, printer (through bonjour), but not the disk drive. I have been in the Airport Utility multiple times assigning access to the disk drive, by Disk Password, Base Station Password and by Account. But I always get the same error dialog box after attempting to connect.
Airport Disk Agent:
Unknown user, incorrect password or login is diabled. Please retype the login information or contact the disks administrator.
Since the PC is connected to the Airport Extreme by ethernet cable, the PC has full administrator privaledges.
Help!
iMac 20" Mac OS X (10.4.8)

Personally, I would not launch into a rant against Nokia about this as you have now done unless you have some evidence that it is actually their fault.
I have only seen this problem with recent Nokia phones reported by just a couple of people and I have seen no evidence that it is strictly Nokia's fault - it may be so or it may not be. It does not seem to be widespread.
If you do a Google search for "Error 633 Modem in use" you will see that the problem is encountered, seemingly randomly, by some users with a wide variety if devices not just phones as modems but other modems as well and all from a wide variety of manufacturers, not just Nokia.
If you read through the thousands of Google links on the error 633 problem you will also see that there seems to be no well defined solution to it - seems to be encountered by small proportion of users of a device but not all so it would seem that there are usually local machine issues involved.
In the end, as I set out, if it is important to you that you have the modem working I have found that for me with an N8 (Anna) it all works fine with Win XP installed in a virtual machine on the Win 7 64 PC.

L7580 All-in-1 is listed as a disk drive by Device Manager! What gives?

Disk manager lists my officejet L7580 as "HP Officejet Pro L7 USB Device" under Disk drives. Is this an error? Do I need to reinstall the driver? I'm having some other problems with the printer that I'm trying to track down and am wondering whether this might be a lead to the problems.

I am having the same issue with the HP Officejet Pro. (Model is 8510) Will not connect the printer via the USB port or wireless. Imaging Devices displays HP Officejet Pro 8610. Other devices displays Unknown device.
Deleted the device from Disk drives but it comes back just as soon as I connect the printer to the PC. Earlier my problem was that 5 or 6 .inf files were not in the C:/windows/inf folder.
4 hours wasted trying to get a printer on my PC.

How to look at movies with IPAD3 using Airport express and external disk drive (USB connexion to Airport Express)

I would like to stotre several movies on an external disk drive connected to Airport express through USB port. With my IPAD, I am able to use the WiFi network (generated by Airport) buy I don't see the disk.... how to make it happen ? Thanks. JP A

Shoudl I use ICloud instead or another way ?
I have not tried iCloud for this...and understand that it is mainly for your backups. These link might help:
http://www.apple.com/icloud/get-started/
http://www.apple.com/icloud/setup/
Or, you could post in the iPad support area since that is really what your question is about.

Is it possible to boot a 7300 with a PCI USB card with OS 8.5 on a flash drive? Thanks

Just wondering if it's possible to run a PowerMac 7300/180 with the operating system installed on a flash drive which fits into a USB PCI card? The old hard drive finally went bad and was just wondering if there was any form of flash storage alternative to purchasing a new SCSI hard drive. I have an original OS 8.5 installation CD, would that install onto a flash drive if the computer is able to recognize it? Thanks!

Unfortunately, USB support in the older "PCI" Power Macs isn't firmware-based, so it won't be found in the 7300's ROM code. If available, it's through the addition of a USB PCI card and is driver-based. You can't boot from a device, if the drivers needed for recognition of the bus (on which that device is connected) are loaded after the boot sequence has been initiated. USB flash drives are very useful for extra data storage in those old Macs, but you really need to be running OS 8.6 and download/install the "USB Adapter Card Support 1.4.1" for recognition of the PCI card itself. If running OS 8.6, I've found that the optimal database of supported USB peripherals is contained in the USB Support files, that are included in the OS 9.1 Update. The files need to be extracted with "TomeViewer" and placed in the OS 8.6 Extensions Folder. Again, this will only help with the recognition of a USB device when the computer is up and running. It cannot make a connected USB flash drive capable of booting the computer.

External FW/USB Western Digital, Seagate Disk Drives and 'Sleep' function

As you are aware, most external disk drives be they FW or USB (and irrespective of the manufacturer, save for LaCie) have a 'sleep' function built into their Firmware. In the case of the Western Digital and Seagate Ext FW drives I have, this function cannot be disabled and this per both WD and Seagate.
Unfortunately this is extremely annoying if using Photoshop and Bridge...it takes about ten seconds for each disk to spin up while the latter programs search the drives. (In Windows this can be enabled/disabled. Not so with the Mac O/S I have been told). Multiply this by six of the aforementioned drives and it can be quite time consuming.
Is there an OS-X workaround for this?
Thanks again,
Lyman

I always avoid vendor cases. Might want to look at an Oxford 912 etc, or better yet, why use Firewire when eSATA works so well?

Arch: Install to & run from External USB Hard Disk Drive (HDD)

I wanted to play with ArchLinux 2009.02, but replacing the existing Debian-Lenny on the laptop's HDD wasn't an option. So I experimented with installing Arch on an external USB Hard Disk Drive.
I have tried to make this "newbie-friendly", so I hope the more experienced will forgive the detail.
Materials:
Three year old Dell Inspiron 6000
CPU = 2.0 GHz Pentium
RAM = 2.0 GB
Internal HDD = 80 GB
Internal CD/DVD R/RW
External USB HDD = Freecom FHD-2 Pro 80 GB
Archlinux 2009.02 install CD
Steps to install:
1. I put the Archlinux install CD in the drive and connected the external 80 GB HDD in the USB port.
2. When the Dell laptop was booted, I pressed F2 to enter the BIOS setup. I edited the boot sequence to the following:
Internal CD/DVD
External USB device
Internal HDD
On the Dell, you can also press F12 to select the preferred boot device for that boot.
3. I started the laptop and the Archlinux installation menu came up and I proceeded with installation following the "Official Arch Linux Install Guide" and the "Beginners Guide".
4. Used km to change to UK keyboard layout and then began the installer script (/arch/setup). I was installing from the core CD so I skipped the network steps.
5. HDD preparation.
This was fairly straightforward with two cautions:
(a) Make very sure that the external HDD (sdb) is selected for the operations.
(b) Remember to set the Bootable Flag for the first (/) partition on the HDD.
I chose 20 GB for /, 2 GB for swap and the remainder for /home.
6. The package selection and installation was fairly straightforward.
7. Configuration of System
This was section was straightforward with one warning:
USB had to be added to the HOOKS in the /etc/mkinitcpio.conf file!
I found this to be essential for my external USB HDD to function as a bootable device. Otherwise I got the same sorts of errors relating to unrecognisable file system types that other people have reported in the forum.
The relevant line from the end of the edited /etc/mkinitcpio.conf file is below:
HOOKS="base udev autodetect pata scsi sata usb filesystems"
8. Installation of GRUB was the other point where caution and/or correction was necessary.
When it asked where GRUB should be installed, I had to select sdb (my external USB HDD) and not any of the particular partitions on sdb. If the root partition sdb1 was selected then the laptop won't boot from the external USB HDD.
The GRUB /boot/grub/menu.lst as written by the installation routine specifies hd(1,0) which doesn't work when you try to reboot from the external USB HDD. When you boot Arch from the external USB HDD, as far as Arch is concerned - at that point in time - the external USB HDD is the first drive in the system. To fix this:
(a) When the Arch boot menu comes up, press e to edit the grub entries.
(b) Change the first line to hd(0,0)
(c) To the end of the kernel line add rootdelay=8
(d) Press b to boot the system with these temporary corrections.
(e) Once your Arch system has booted, edit the /boot/grub/menu.lst to make the above changes permanent.
The relevant portion of my /boot/grub/menu.lst looks like the following:
# (0) Arch Linux
title Arch Linux
root (hd0,0)
kernel /boot/vmlinuz26 root=/dev/disk/by-uuid/... ro rootdelay=8
initrd /boot/kernel26.img
# (1) Arch Linux
title Arch Linux Fallback
root (hd0,0)
kernel /boot/vmlinuz26 root=/dev/disk/by-uuid/... ro rootdelay=8
initrd /boot/kernel26-fallback.img
9. The laptop happily and consistently boots Arch Linux from the external USB HDD when it's plugged in before startup/booting.
Running Arch from the external USB HDD seems as quick as running Debian from the internal HDD.
So if there is a performance penalty associated with using an external USB HDD, my wife and I haven't noticed.
In summary, the three essential points to address during installation to an external USB HDD are:
Remember to set the bootable flag for the first partition.
Add USB to the HOOKS for /etc/mkinitcpio.conf file.
Correct the /etc/grub/menu.lst file.
I hope this is helpful.
Ted

Hi Rookie,
As you say, it is worth remembering the rootfstype= option for the kernel line just in case someone still has problems with GRUB after making all the other changes.
I was working with the most recent Arch 2009.2 release.
I only got messages about unrecognisable file system type when I tried booting with the "stock" or "as-installed" GRUB (before I edited /boot/grub/menu.lst). After editing /boot/grub/menu.lst to identify the drive correctly and add rootdelay, GRUB was able to do the rest and everything worked OK without any error messages.
Best wishes,
Ted

HT4889 Migration Assistant to update my new Mountain Lion iMac from an external USB hard disk drive, it is constantly saying that it is "looking for other computers". It doesn't find the external drive. Why is it looking for other computers?

I'm trying to use Migration Assistant to update my new Mountain Lion iMac from an external USB hard disk drive. I told it to look for a drive, yet it is constantly saying that it is "looking for other computers". It doesn't find the external drive ... it just endlessly looks for other computers. Why is it looking for other computers at all, when I told it not to?

Wow, the wording in Migration Assistant is misleading. I've never used it before, so I thought I would try to copy my files from the external drive ... my old iMac died, but I managed to get everything I need off it, using the 'cp' command in single-user mode. So I guess I'll just have to manually copy the files from the external drive to the new machine. I was hoping that Migration Assistant might help somehow, but obviously not.
Thanks for the quick reply!

Fire wire or usb Connection for external disk dvd disk drive

is it worth the extra money buying a external dvd re-wrighter with fire wire connection rather than the traditional usb connection? would it work like a normal disk drive as my internal dvd/cd drive is broken.

Thanks SCB and malcom
Ive got a budget of around £100 to spend and have been looking at a lacie dvd+16x light scribe 4.7gb/8.5gb with fire wire. Any idea if there any good?
Pioneer any models i should be looking for?
thanks

How to access a USB disk drive connected to Airport Extreme from a Windows 7 PC?

How can I access a USB disk drive connected to Airport Extreme from a Windows 7 PC?

...Called it a roaming network. Wireless mode is create a wireless network. I have checked allow this network to be extended. Probably need to uncheck that?
Yes, that option should be deselected as it only pertains to when both routers are interconnected by wireless. Since you have a roaming network, they of course, would be interconnected by Ethernet.
The other important settings for a roaming network are:
Each router must have a unique station name. For the AirPort, this would be called its Base Station Name. I believe the default station name for Linksys routers is: linksys
Each router must broadcast a wireless network with an identical Network Name. For the Linksys, Network Name is the same as its SSID.
Each router wireless network must use the same Wireless Security type and password. The Linksys WRT-54G is capable of up to WPA2 Personal. If you have it set to this level of security, the AirPort should be at the same setting.
Make sure that each router is not on the same Radio Channel for the 2.4 GHz radio. In the US, there are basically only three non-overlapping channels: 1, 6, or 11. Set each so that they don't use the same channel but use of those three choices.

Trying but Failing to Set Up USB Disk Drive with E4200v2

I'd like to have my E4200v2 serve a Western Digital MyBook 1 TB disk drive on my LAN so that Windows systems can see it and use it as a backup drive.
I have the last "classic" firmware in the E4200v2, version 2.0.36.126507. Everything to do with routing has been working flawlessly for a few years now. I couldn't be happier with the device.
I've set up the Storage tab parameters, and the router sees the disk. It recognizes the file system is NTFS and sees the partition name (I had formatted the drive and actually used it before connected directly to a PC, so there are a bunch of files on it).
However...
1. I can't connect to it from any Windows system (not Win 7, not Win 8.1). On a Win 7 system one time the router name showed up under Network, but when I click on it I see "Windows cannot access \\RouterName", "Check the spelling... blah blah". The detailed error code is 0x80070035.
2. Whenever I plug in the disk it just starts feverishly seeking and accessing, as though something is running through every file on it. This concerned me a bit at first, since it made me wonder whether someone somehow got in right away and is uploading all my data, but it continues to happen even when the Internet cable is out. Ergo it must be some internal process of the router. I have the Media Server and FTP Server settings to Disabled, however, so I'm not sure what's up.
Questions:
A. Do I have a hope of making this work with the 2.0.36 firmware?
B. Why is the router continuously accessing the drive?
Observations In anticipation of questions:
The router sees the drive, properly gauges the file system (NTFS), and properly shows Capacity and Free Space.
The permissions in NTFS are set so that Everyone has Full Control.
I have the workgroup name set right.
I have Anonymous Disk Access set to Enabled.
The root folder of the partition is what's shared.
I cannot ping the router by the name it shows next to Shared Folder, Router Name, but I can ping it by IPv4 address.
I have added my Windows username and password to the Administration section and have set the Group to admin.
It's been accessing the disk continuously for about an hour so far. What's the router looking for?
Thanks in advance for any wisdom you can offer.
-Noel
Solved!
Go to Solution.

My Western Digital My Book Essential Edition 1 TB shows Passed.
But it doesn't work properly with Windows 8.1.
It was able to copy a few gigabytes of data successfully yesterday, then my file backup ran at 4am, which should have copied a few hundred gigabytes. It ran for about 1.5 hours successfully, then started getting these errors while copying photo files:
S:\MMEDIA\Photos\2004\05\Karate Black Belt Test\IMG_8369.jpg
S:\MMEDIA\Photos\2004\05\Karate Black Belt Test\IMG_8370.jpg
S:\MMEDIA\Photos\2004\05\Karate Black Belt Test\IMG_8371.jpg
S:\MMEDIA\Photos\2004\05\Karate Black Belt Test\IMG_8372.jpg
File creation error - Insufficient system resources exist to complete the requested service.
S:\MMEDIA\Photos\2004\05\Karate Black Belt Test\IMG_8373.jpg
File creation error - Insufficient system resources exist to complete the requested service.
S:\MMEDIA\Photos\2004\05\Karate Black Belt Test\IMG_8374.jpg
File creation error - Insufficient system resources exist to complete the requested service.
S:\MMEDIA\Photos\2004\05\Karate Black Belt Test\IMG_8375.jpg
File creation error - Insufficient system resources exist to complete the requested service.
That was fatal. According to the router's Storage panel, around 60 gigabytes were copied before the error occurred.
Now any attempt to access the drive from the command line is met with the same error message, and now the share doesn't even show up in File Explorer any longer.
I'll dig further into exactly what's happened, but it looks so far like a resource has been exhausted on the router itself, making this setup useless for doing real backups. There are no telltale messages logged in the WIndows logs, and a freshly booted Windows system does not see the share at all.
The workstation from which I scheduled the backup runs essentially forever without problems, and backs up literally terabytes to internal drives and a local USB drive every night without problems. Plus, this router has been working non-stop for literally years without a problem.
Granted, I've not upgraded to the latest "overly dumbed-down" firmware (I tried; THAT process failed - twice), but to a career software engineer this has turned out to be a disappointingly bad implementation of a selling-point feature.
-Noel

AirPort Extreme USB Connected Disk Drive Not Visible To Time Machine

My AirPort Extreme USB connected disk drive is visible in the Finder and desktop. It is not visible to Time Machine. When I open Time Machine and bring up the "Choose Backup Disk" the AirPort Extreme USB connected disk drive is not visible.
What am I missing here?

Hi Pete Mackie-
Nope. You aren't missing anything.
Mac OS X 10.5: Time Machine doesn't back up to AirPort Disks
Luck-
-DaddyPaycheck

USB card in disk drive

Similar Messages

Maybe you are looking for