USB card reader problem with T430 laptop (Win 8)

I have a Thinkpad T430, running Windows 8 with 16G memory.
I have recently encountered problems with a USB card reader. I thought the reader was faulty so I bought a new one, but that one fails as well. It makes no difference which socket it is in.
After being plugged in for a few seconds, the 'drives' the reader sets up start to flash in the 'Computer' window - it seems they are continually being disconnected and reconnected.
Disabling USB 3.0 in the BIOS makes no difference. One card reader is USB 2 and the other is USB 3
Changing the power settings so the USB selective suspend is disabled makes no difference.
I am pretty sure that it was OK a month ago when I last used a card reader (the machine is about 2 months old).
What is going on?
Any ideas?
Thanls,
Michael

Ok Mr. Micheal,
One thing you can attempt to do is download the SmartCard Reader Driver for Windows 8 (64-bit) - ThinkPad on the Lenovo website. The path you need to take is listed below.
1. Go to the Lenovo website (www.lenovo.com)
2. Select the support link at the top of the page
3. Your going to see for windows listed select the type of support you need, so select drivers and software
4. Its going to ask for your machine information so enter in your machine type or your product ID
5. Scroll down to camera and card reader and open the link
6. Download SmartCard Reader Driver for Windows 8 (64-bit) - ThinkPad
7. Follow the set up wizard and one the driver is installed reboot your machine
Please respond once this action is performed and let me know if this happens to resolve your issue. Thank you
______________________________________________________________________________________________________________Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Similar Messages

Card Reader problem with MSI K8T Neo

Hi,
I have the K8T Neo motherboard, and every once and a while my Atech Flash 9 in 1 card reader (http://www.newegg.com/app/ViewProductDesc.asp?description=20-176-003&depa=0) doesn't power up, thus I can't use it.
What's odd is that all my other USB devices work flawlessly.
The only way I'm able to use the card reader again is to power down my computer and then flip the power switch on the psu, then turn it back on, or unplug the reader from the usb header on the motherboard and plug it back in.
I've noticed other people have had similar issues...
Any ideas what causes this, or any ideas on how to fix this?
Bio Haz

Yes, I had the same hanging problems as well with older BIOS versions then 1.7.
But that isn't the problem I'm talking about, the computer always starts up, it's just a matter if the usb reader will work or not.
Maybe MSI has yet to make a BIOS that is compatible with all card readers.
BioHaz
Quote
Originally posted by me_AMD
...yes, I had USB card reader problems but it caused the computer to hang during POST, and that was fixed with BIOS v1.7...
...I've had what you describe happen on another machine with a Mitsumi card reader/floppy drive combo...not sure what caused it...had to disconnect it and then plug it back in...???...

W500 card reader problems- with a wrinkle??

My card reader won't recognize SDHC cards. I have a W500 (4061-BL2) running Win XP Pro, Service Pack 3. I installed the latest drivers for the 4-in-1 reader (Ricoh Multi Card Reader driver 3.64.02 which does show up in the "Add/Remove Programs" listing). Based on reading this forum, I considered KB934428, but, when I tried to install the hotfix, I learned it is not needed with SP3. (I didn't try to install KB923293 which is the other hotfix frequently mentioned for this problem as it appears to be older than the ...428 hotfix??)
Everything appears to be normal in Device Manager.
When I try to insert a Kingston 8GB SDHC card (that I know has pictures on it as I can see the pictures on my Canon camera), my system does recognize the card (under "My Computer", it shows up as "SD/MMC (E", but, when I try to access the card, it only says "The disk is not formatted.. Do you want to format now?".
I know there are 20 other forum posts on this problem, but, mine appears to be somewhat unique with XP SP3.
Like everyone else with this problem, I can read the card just fine with a USB card reader.
Any help will be deeply appreciated! Love the W500 except for this nagging problem as I am really anxious to use the card reader.

I just fixed a co-workers Ricoh 4-in-1 reader by following these instructions
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70881
It says it's for R61 but worked on W500.
Running Windows XP Pro SP2. I tried the Lenovo Drivers but they didn't work.

USB Card Reader Works with Bios 1.70

Just to report that I upgraded to Bios 1.70 and reconnected by USB Card Reader and I rebooted the computer a few times with NO bios hang-ups! Your milage may vary, but I'm happy to see MSI fix this big issue with me!

...hmmm...same here, maybe 95% of the time...nevertheless, much improved...

USB card reader problems

I'm using a new MacBook Pro with an old USB 2.0 card reader (21-in-1 TDE) - but it keeps unmounting, just long enough for the file transfer to fail. I get a message saying I've disconnected the storage device.
I've changed the cable, tried the reader on a Mac Pro (which worked fine) and the problem doesn't occur with a FireWire reader. Other USB devices seem to work OK. My system is up to date (10.4.8), has 2GB RAM and occurs regardless of trying to download images via Aperture) or simply copying the files from the card in Finder.
Given the hardware works fine on another machine and Firewire gets around the problem, I reckon it's a USB problem - but hardware or software?

I'll try that when I'm back at work in the New Year (I don't have a powered hub here), but I will be surprised if it fixes the problem - after all, the machine provides enough power through its USB ports to run an iPod (complete with a 60GB hard drive), why not a simple card reader?
It would also mean I wouldn't be able to download images at on-site shoots (no mains power).

SD card reader prob with L530 on Win 7

this forum is so crowded, incredible. sorry to say that. have a serious prob with the integrated SD card reader with my L530 on Win 7:
- not showing in device manager with/without card
- not showing in explorer, when card inserted (tried different cards, no worries)
- installed all available lenovo&win7 card reader driver, no change
- not even LED light flickering or anything, just off, no function
- no option in power management to enable card reader (as suggested in some forums)
would be a shame if i couldnt use the in-built lenovo hardware.
thanks for help
klingsor

Hi, klingsor
I would firstly make sure that the Card Reader is enabled in BIOS. This can be done by entering BIOS (hit Enter at splash screen, then hit F1 when the menu pops up.) From here, select Security and then I/O Port Access. Make sure the Card Reader here is set to Enabled.
I would also recommened making sure your BIOS has been updated, as this can sometimes cause some issues with peripherals not working as intended. The latest version can be found here.
Best,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Camera / USB card reader not connection to macs anymore - fine with PCs

Hi there,
I have a Canon EOS 50 which has a CF card - I normally connect this to our macbook pros with a crd reader via usb. Alternatively, I connect the camera directly.
Yesterday, something started to go wrong.
I was connecting the card to download photos - at first it recognised the card as an external drive, but was taking ages to read the photos. Then it flashed an error message up that it couldn't read the format of the disk (it had previously for about a year!).
Now when I connect the card via either reader or by connection to the camera, it doesn't recognise the card at all.
I tried this on both my mac book pros we own. Same issues.
Canon HD camcorder connects absolutely fine via usb, as does Ipod - so it isn't the usb port.
I think the cards are ok- (same issue with two different CF cards)
The camera connected no problem to my brother-in-law's vista machine, and downloaded the image files.
I tried connection with two different usb cables as well.
Any ideas as to what has happened?
Thanks,
ThreeIsles

Last year I purchased a USB card reader to have available with my laptop when I travel. It experienced the same problems you are having. It also wouldn't work with my G4.
I looked on the manufacturer's web site and sent their Customer Support an email explaining the problem. They sent me a new reader at no cost. It works. Suggest you do the same.
 Cheers, Tom

IMAC won't boot with USB card reader attached

My quite new 24" iMAC won't boot if I have a USB card reader attached:
I get to the white screen with the apple logo, but it gets stuck there and the little spinning gear below the apple logo never appears (I've waited several minutes). (In all my test cases, there is no card in the card reader.)
I've tried two different card readers with the same results ("iDOTconnect" brand and a brand new Apacer unit, both are USB2.0 multi-format card readers).
The 1st one I tried via a USB hub, the second one I tried via a new hub and also directly connected to the mac (both of those hubs work fine).
Anyone have any ideas?
Regards,
Strathglass
Message was edited by: strathglass

Hello strathglass
The same thing can also happen with other connected devices such as external HD's and iPods, the Startup Manager is lost and searching for a boot volume.
1. You may be able to fix it by going to: *System Preference / Startup Disk* and select the *Mac OS X 10.5.5 on Macintosh HD* then *Click the lock to prevent further changes.*
2. Leave those devices that cause boot issues disconnected until the iMac is up and running!
3. Only sleep the iMac, and be sure to disconnect those devices be for shutting down or updates that require a restart!
As a habit, I have always ejected and disconnected all mounted USB devices (flash driver, iPods, cameras, card reader, etc.) from my hub be for sleeping, restarting or shutting down...
Dennis

Sun Ray - How to get external USB Card Reader working

Dear All,
i have the following problem. Maybe someone could help me or give me a clue to solve it.
SunRay Software 5 installed
Window 2003 R2 TerminalServer
Here my question:
I use a kiosk session with a smart card to conncet to the windows server - works perfect.
Login Screen and go.
Now i have to have to authenticate myself with an external usb card reader and smart
card (connected to the sun ray) to use a certain application on my win2003 server.
Via the windows rdp session (from the laptops) everthing is ok. The information from
the card reader is transferred to the server.
If i use the Sun Ray nothing happens. So here is my problem:
How do get the authentication information from the smart card to the server?
Thanks in advance
Best regards
Hans-Peter

Basically, reinstall the Boot Camp video drivers manually and if that doesn't work then go to the AMD/Radeon website and install the Windows drivers directly for your video card model.
If you want to do a search you will find others that have pretty good luck doing it either way.

Mobilemate usb card reader adapter worked well in Macbk pro. suddenly stopped showing up as a device in finder-it is listed as a device in utilities- how do I get it to show up again?

Can anyone tell me how to get my mobilemate sandisk usb card reader adapter to show up in the finder as a device? Card is good and the adapter was working fine until my boyfriend tried to get it to work in a photo frame. When I plugged it back into my mac bk pro it is not recognized in the finder.
It does show up in the utilities as a usb device.
Does not show up as it had before in Image Capture or Iphoto.
LIke I said it was working in this computer no problem. light is on as if it is reading. card is not locked.
thanks!

I reformated the disk with an applecare rep this morning. it did not correct the problem.
the card works fine when I insert it directly.
Just trying to find out why the adapter no longer shows up in the finder when it did previously- yesterday.
This is a usb device. Device shows up in system profiler.
Message was edited by: lizfromwestlake village

Windows 7 64-bit: Switchable graphics and Ricoh card reader problem

Hi guys,
Two problems with my laptop. I'm using a T400, previously installed with Windows Vista Business 32-bit.
Switchable graphics worked well until I formatted and installed Windows 7 Pro 64-bit (I got the RTM through MSDNAA). Now, Windows can only detect either the discrete graphics or integrated graphics at one time. When the BIOS was set to switchable graphics and enabling the detection of switchable graphics on Windows, it could only detect the Intel integrated graphics. When I try to switch to High Performance graphics through the Lenovo power manager, the screen flashes once, and the ATi graphics card appears on the device manager with the code 10 error (cannot start device). Also, compared to this image, my power manager window that opens with left-click does not have battery stretch and switchable graphics options. I have to right-click to switch my graphics.
After some tinkering, I managed to activate the graphics card through the BIOS by switching it to discrete graphics only and disabling switchable graphics detection by Windows. Now the device manager shows the ATi card only, the Intel integrated graphics is gone. I understand that it should show both display adapters in the device driver when the ATi card is active: http://www-307.ibm.com/pc/support/site.wss/MIGR-70495.html#g4
The second problem is with the Ricoh card reader. I managed to install the drivers properly, but the device shows up with a code 12 error (This device cannot find enough free resources that it can use) in the device manager. That error appears on 6 items in the device manager:
Ricoh Memory Stick controller
Ricoh SD/MMC Host controller
Ricoh xD-Picture card controller
Ricoh 1394 OHCI Compliant host controller
Ricoh R/RL/5C476(II) or Compatible CardBus controller
SDA Standard Compliant SD host controller
Additionally, 6 error messages appear during every boot up, which I think is related to these 6 devices:
ERROR
Resource Conflict - PCI in slot 07
Bus:15, Device:00, Function: 00 (it ranges from function 00 to 05)
AND disabling the device through device manager results in a BSOD.
I've seen some people post about the Ricoh problem, but didn't have any resolution (at least for those who had the boot up error message too). The switchable graphics problem seems quite common too but in my case it seems like it is working fine EXCEPT for the fact that only one graphics adapter can appear on the device manager at one time and I can't do switching at all. Anyone know if I can somehow solve this? Sorry for the wall of text and two-problems-in-one. I put them together because I don't know if one problem is affecting the other as both problems appeared at around the same time.

As far as the graphics goes it's well accpeted the only way at present to switch is though the bios manually. There is currently no drivers that enable users to switch from within Win7. Know it's a pain but will just have to wait.

Slow USB Card Reader - MacBook Air / Windows 7 64-bit / Boot Camp 3.2

Installation of Windows 7 64-bit on my new MacBook Air 11" seemed to go flawlessly from the attached USB SuperDrive. I see no driver issues or unrecognized devices in Device Manager. However, when attaching my Transcend USB 2.0 Compact Flash card reader to load pictures from my camera into Lightroom 3.3, data transfer is mega-SLOW. It takes several minutes (10?) to transfer just 4 pictures. It seems like it may be operating at USB 1.0 speeds.
Installing software from the SuperDrive on the same USB port seems to work fine. Attaching a USB mouse works fine. However, the USB card reader is very, very slow.
If I attach the same card reader, CF card, and cable to another Windows 7 machine, it works fine, so I don't think there's a problem with my reader / card / cable.
Any thoughts about how I might improve performance for the card reader on the MacBook Air (other than running Mac OS)?
Thanks!
Matt

Posted to wrong forum - sorry for the error.

MacBook Pro now does not recognize USB card reader

My computer recently stopped recognizing my usb card reader. The usb port works fine with my iphone and ipod. The card reader works when plugged into a windows based machine. The problem is not related to OS 10.6 because I had the issue prior to upgrade. I must of updated something software related that is causing the problem. Anyone have any ideas?

My computer recently stopped recognizing my usb card reader.
We'll need to know exactly what you mean by this. Plug in the reader, without a card in it. Go to Apple Menu > About this Mac > More Info and click on USB in the left column of System Profiler. Do you see *Mass Storage Device* listed under one of the USB port entries in the right part of the window? If so, the reader is recognized. If not, it really isn't. In that case, reset the SMC in your MBP:
http://support.apple.com/kb/HT1411
Then test again and post back with results.

Motherboard hangs on POST when USB card reader is plugged in

Hi there, I am using the MSI Z77A-GD65 GAMING motherboard. I am using the following USB card reader which I bought from a local store: Amazon.com: Epraizer Universal Flash & SIM Card Reader/Writer, USB 2.0: Computers & Accessories
However, whenever I boot with this device, my BIOS is stuck at error code 'C6'. A check on AMI's website shows that this related is probably related to boot devices. I am able to boot fine with other USB devices plugged in, such as USB thumbdrive and USB hard disk.
At first, I thought it was a problem with my device but I can boot fine with the memory card reader plugged in on all my other computers. This makes me wonder if there is a firmware fault? I have tried disabling legacy USB and removing USB devices from boot order, but nothing helps. I have seen that in the forums some BIOS updates for some motherboards fix this issue, for example: **Official MSI Z77 Mpower Discussion Thread** - Overclockers UK Forums , where in one of the BIOS update the changes reads: Fix the issue that the system will hang 0xB4 or 0x99 when use customer usb cable or usb cardreaders.(USB cardreader: KAMA reader Tr, Akasa card reader).
So I was wondering if it's a common issue with MSI motherboards? Will there be a fix or my motherboard is now too old to be supported? I purchased this motherboard two months ago btw
P.S it works fine when I plug it in in Windows. I have tried both the ports in front and at the back, USB 2 or 3.

It is then obviously a compatibility issue with that particular card reader and that particular board model. As your board is long time EOL ("End-of-life") and has been replaced by two generations already there will be no further updates. What bios versions did you try already?

CARD READER PROBLEM-Mega 865

I'm having a problem w/ my card reader ...I have the 6 in 1 ...you know.
Anyways when I insert the SD card and attempt to access it i get the following error.
"E:\ is not accessible.
The request could not be performed because of an I/O device error."
This happened with another SD card i have also.
1 of them is 256mb
the other 512mb
same issue with both cards.
anyone had any thing like this happen?
any suggestions or knowen issues....?
Thank You . Sys Spec listed below if it help any.
Mega 865
Operating System   Microsoft Windows XP Professional
OS Service Pack   Service Pack 2
Motherboard
CPU Type   Intel Pentium 4HT, 3000 MHz (3.75 x 800)
Motherboard Chipset   Intel Springdale-G i865G
System Memory   1015 MB DUAL CHANNEL (DDR SDRAM) PC400
BIOS Type   Award (02/25/04)
Display
Video Adapter   Intel(R) 82865G Graphics Controller (96 MB)
3D Accelerator   Intel Extreme Graphics 2
Monitor   Sony SDM-HS73 LCD 17"
Multimedia
Audio Adapter   Intel 82801EB ICH5 - AC'97 Audio Controller
Storage
Disk Drive   Maxtor 6Y160M0 (160 GB, 7200 RPM, Serial-ATA/150)
Disk Drive   OEI-USB CompactFlash USB Device
Disk Drive   OEI-USB SM/MS/SD USB Device
Optical Drive   SONY DVD RW DW-D18A
Input
Keyboard   Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
Mouse   HID-compliant mouse
Network
Primary IP Address   192.168.1.101
Primary MAC Address   00-0C-76-70-9C-12
Network Adapter   Broadcom 440x 10/100 Integrated Controller
Network Adapter   IEEE 802.11b MiniPCI Wireless Network Adapter (192.168.1.101)
Modem   Actiontec MDC AC'97 Modem v2132A
Peripherals
Printer   \\COMPUTER\hp deskjet 3500 series
USB Device   Motorola MPx220 Smartphone
USB Device   USB Human Interface Device
USB Device   USB Mass Storage Device

seems that the card reader wouldn't read SD cards, but was ok with MMC. i have replaced her combo drive with another Mitsumi one, and now both SD and MMC cards work fine. gonna try the faulty combo drive in my computer later, but i suspect it is a faulty card reader
EDIT: looks like i jumped the gun a bit - mum says the new drive is now doing the same thing trying her old one in this computer and so far all looks ok.
BTW her XC Cube is the EY65, which - like the Mega 865 - uses the Intel 865g chipset
does anyone have any suggestions for us? it cannot be a conflict between the OEI-USB card reader devices and the intel 865g chipset, otherwise every mega user would have seen this....

USB card reader problem with T430 laptop (Win 8)

Similar Messages

Maybe you are looking for