USB changes since UDEV upgrade

Hello,
in my fstab I have a line linking /dev/discs/disc1 to /mnt/usb
It has worked so far even when I switched to udev.
Since the upgrade it stopped working and disc1 doesn't appear when I plug in my usb-drive.
I solved it by adding usb_storage to the modules array in rc.conf.
But it was still odd and I'm not sure if it's a bug or something I did wrong.
anyone knows what's this all about?
Grey

doesn't quite work as it used to...
I have several lines like
BUS="usb", SYSFS{serial}="MY34F1K1477A", NAME="%k", SYMLINK="hp5150"
BUS="scsi", SYSFS{model}="QV DigitalCamera", KERNEL="sd?1", NAME="%k", SYMLINK="exilim"
BUS="scsi", SYSFS{model}="STORAGE DEVICE*", KERNEL="sd?1", NAME="%k", SYMLINK="usbstick"
the hp5150 device is created, but the exilim and usbstick devices aren't - when I plug those in, an sdX and sdX1 device is created, but not the symlink
Yesterday, before I did a sys upgrade (so before udev got updated), this worked fine.
I'm using udev 060-3

Similar Messages

  • [SOLVED] can't mount USB external drive since udev upgrade to systemd

    At somepoint in time around the June 1 change from udev to systemd or the change from udisks to udisks2 something has changed the way my external USB drives auto-mount.
    I have always just plugged them in and they show up in PacmanFM just fine. Now, they do show up but the NTFS drive is showing as read-only and another empty drive that I have reformatted using GParted to xfs, then ext2, and finally again using ext4 gives "Permission Denied" errors when I try to put a file on the drive. Happens no matter how I format it.
    Did something change that I need to manually configure? Up to this point I relied on udev just kind of doing its thing - I never had to configure anything to get these drives to work properly.
    Last edited by AyeCapn (2012-06-26 15:15:59)

    Perhaps the cause of my issue might be relevant:
    While the now deleted udev automount script from the Arch Wiki had worked for months without issue, approximately since the udev/systemd merger it became broken for NTFS partitions on USB devices.
    It still worked with the classic initscripts, but with systemd it only resulted in "Transport endpoint is not connected" for the supposed mount point and ls reported lots of "?" for it.

  • Issues with i-Phone4 car USB Connection since IOS5 Upgrade

    Hi,
    I connect my i-phone 4 via Bluetooth to my car, and also plug it in via USB, so that I can control the device using my steering wheel controls.
    Since ugrading to IOS 5, the Bluetooth phone connection appears to be working OK, but my music cuts out after a minute or so, although I can still select music via the car controls after it cuts out, but it won't actually play.
    If I look at the screen of the device itself when the music is playing, the screen tells me that it is connected to an accessory, and when I click on the device option at the bottom of the screen, it gives me two options for the connectivity - "USB" or 'My Volvo Car' (and the option selected is "USB").
    However, when the music cuts off, if I view the same screen, it has switched to 'My Volvo Car'.
    The same thing happens when connecting via the AUX input. The music cuts out after a minute or so, and it swpas to the default of 'My Volvo Car' so I can't hear the music again.
    All of this worked perfectly until the IOS upgrade, so any help or advice to resolve this issue would be greatly appreciated !
    FYI - I have a 2011 latest model Volvo XC60 R-Design with the Premium Stereo.
    Thanks !

    Hi,
    Not exactly
    The only compromise I have found is to also stream the music via Bluetooth too (select 'Bluetooth' in the 'Input Menu' of the car, instead of Aux or USB).
    It's very impressive for new passengers (like when you first stream music from your i-Phone to your stereo at home using Airport Express), but the only downside is that whilst you can change tracks within the same playlist via the steering wheel controls, you can't hunt through menus any more with the scroll wheel 
    Not a perfect solution, but better than nothing
    Please let me know how you get on and whether you find something better !

  • IOS 8.1, mail fumction, date at bottom of email accounts the date hasn't changed since 9/26/14.  How can I fixed this?

    iOS 8.1, mail fumction, date at bottom of email accounts the date hasn't changed since 9/26/14.  How can I fixed this?

    Thanks for the reply Brenden.  However the problem is:
         At the very bottom of the "Mailboxes" screen (where I've got 6 email addresses that do work) there is on the far right (bottom right corner) an icon to compose a new message.
         In the center of that space is a generated message that says:  1) "downloading x of y" and 2) when finished downloading it says "Updated on 9/26/14." today is 11/6/14!
         My problem is that that date hasn't changed since I upgraded to iOS 8.1.  The emails are current, but that date isn't!
    Can you help?

  • Since the upgrade, my Icloud account is picking up a former account name-e mail address  I no longer have that address and cannot seem to be able to edit it to change it   the password is always wrong, no matter what i try

    since the upgrade, my I phone I cloud account is picking up my former e mail address/account name and I cannot access it because it keeps denying the passwords I try   I no longer have that e mail address either    I can access I cloud and I tunes on my laptop with the correct account name/password,but not my phone     the i tunes account works fine on the phone--correct name--just not  i cloud       i tried changing it from my computer back to the old address then changing it to the new address and verifying by e mail but nothing happened   

    Hello there, Nana2054.
    The following Knowledge Base article provides some great recommendations for resolving your issue:
    iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
    http://support.apple.com/kb/TS5223
    This additional article can provide some assistance as well, if you are still getting an error message concering your password for that account:
    iCloud: "Incorrect Apple ID or Password" alert when setting up iCloud after upgrading to iOS 7
    http://support.apple.com/kb/TS5207
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Since I upgraded to iTunes 11.01 the "Smart" playlists feature no longer works.  I can CREATE the list but, the songs that I have played don't accumulate in the list.  I haven't changed the steps that worked for me previous to the upgrade.  I have no idea

    Since I upgraded to iTunes 11.01 the "Smart" playlists feature no longer works.
    I can CREATE the list but, the songs that I have played don't accumulate in the list.
    I haven't changed the steps that worked for me previous to the upgrade.
    I have no idea how to fix this and can't find mention of anyone else having a similar problem.
    Any suggestions?

    Click on a station and drag to the left. The playlists sidebar will open up. Drop on the playlist you want to add to.
    tt2

  • Midi / USB drop out since Lion upgrade!

    Hi all, i have had great responses and success in the past with this forum, i really really hope this will continue.
    I have been gigging using mainstage 2 and a M-Audio Oxygen midi keyboard controller for a few years now and until lately it's been fantastic. I will never go back to a stand alone manufactured synth. I am using a macbook pro, 2.93ghz with 8 gb ram. I initially upgraded from snow leopard to lion when it was launched but had to go back as Creative hadn't any lion drivers for use with my emu 0202 audio interface. Last month i found that they had done them and i re-upgraded to Lion. Since the upgrade i am experiencing Midi drop outs. This is to say that whilst performing i get an error message saying something like midi input device no longer available. This has happened a few times now but last night (new years eve!!), not only did i get this message which i sorted with a reboot but a few minutes later i had a midi note hang and i noticed that there was no longer any usb supplied power to my keyboard. The answer again at this stage was a reboot.
    I would ideally not like to reinstall snow leopard as there are quite a few great things in lion which i would miss, but obviously if i can't resolve these issues i don't see that i have any other choice.
    Any possible suggestions as to what may be causing these problems will be very much appreciated.
    Thanking you in advance
    Mark
    PS    Happy New Year

    My experience with Lion was great for a while, it was effortless, everything I had attached still worked with no problems aside from needing occasional drivers.  Once Lion 10.7.2 was released, I updated my system and again, no problems.  If I recall correctly, 10.7.2 was released in October.  Suddenly in December, I began having random software and midi issues all around my system.  I do not use Mainstage but I have noticed others have had similar problems with various software and USB midi controllers, and have not seen a fix.
    I regularly use Pro Tools 8, Ableton Live 8 and occasionally Reason 5.  I also have an M-Audio Axiom 61 and Korg padKontrol attached via USB.  After about 2 months of trouble-free operation, Live and Reason would not open and the accompanying software for my padKontrol no longer would either.  These apps would just "hang" and I would eventually have to force quit them.  In addition, Audio Midi Setup would also hang when attempting to switch to the midi preferences page.  Pro Tools still worked, but I could no longer receive midi signals.  I also use a wireless USB stick to connect to my home wifi signal and that no longer worked and neither did the accompanying software.
    It's possible that there are deeper issues in your system as well as mine and the others having similar problems.
    At times, I wonder if there is some kernel errors embedded in my computer.  I got my MacPro when Snow Leopard was fairly new and had numerous kernel errors resulting in many applications not functioning.  I eventually sorted them out but ran into similar USB related issues with the Snow Leopard 10.6.8 update, so I remained on 10.6.7 until Lion was released.
    The only successful fix I've had is switching from Lion back to Snow Leopard 10.6.7 after erasing my entire hard drive.  I've tried reinstalling Lion through both upgrading from Snow Leopard and a clean install of 10.7.2 after erasing my hard drive again.
    I believe my USB and midi problems stem from kernel errors somewhere but cannot find them (I have used Disk Utility many times).  I really liked using Lion but I lose so much functionality and my internet connection so I have determined that I will not be using it.  I may try Lion again when 10.7.3 is released but am wary.  If anyone has ideas on how to fix these issues, I would love to hear them.

  • HT4623 My contacts are listed by telephone numbers instead of names in my messages since I upgraded to OS8? How can I change it to names?l,

    My contacts are listed by telephone numbers instead of names in my messages since I upgraded to OS8? How can I change it to names?l,

    Under Settings->Messages->Send & Receive
    1) is your Apple ID listed there?
    2)  Under "You can be reached..." is your phone number appearing at the top of the list and does it have a checkmark next to it?
    3) Under "Start New Conversation From" is the checkmark next to your phone number?

  • Cannot publish site changes since upgrading to 10.7.  Suggestions?

    I cannot publish site changes since upgrading to 10.7.  Suggestions?

    In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    For opening your domain file in Lion for the first time or to switch between multiple domain files  Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
    Just launch the applicaiton, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
    do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
    tell application "iWeb" to activate
    Or you can download an already compiiled version with this link: iWeb Switch Domain. Run it to open your site and see if you can publish.  If that doesn't help try the following:
    delete the iWeb preference file, com.apple.iWeb.plist, that resides in your Home() /Library/Preferences folder.
    go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
    launch iWeb and try again.
    OT

  • Since ff upgraded to 7 it opens in maximum mode,how do I change it to open in normal mode

    since FF upgraded to version 7 my window comes up in maximum size,how can I fix it to come up in normal size?

    Hello Amnon,
    You can change the page layout using the Preferences Dialog (shortcut key: Ctrl + K) in the "Page Layout" tab on the left.
    Also, I would recommend you upgrade the reader to version 8.1.2 as it has a host of new features and security fixes.
    Hope this helps
    Gaurav

  • Adobe Illustrator preview icons changed since upgrade to Snow Leopard

    all of my Illustrator files preview icons have changed since upgrading to snow leopard. They use to have the Ai logo. Now they have what looks like the Postscript icon.
    I believe preview icons are controlled by the OS so not sure what to do. Have done all of the usual run disk permissions etc.

    Illustrator CS4 is installed on my computer and works fine. Double clicking the file will launch or open in Illustrator. It's only the preview that is wrong and a bit of a nuisance if I am looking for an illustrator file

  • Name of documents in iBooks are changed since upgrade iOS 8.0

    AAll names of my documents are changed since upgrade iOS 8.

    A better solution. This worked for me and several others, from a post from MrsMike921 in the following thread:
    https://discussions.apple.com/message/26725105#26725105
    go to your settings, and first go to Safari and delete your history by scrolling down to "clear history and website data". Then go to the advanced settings and select ""website data". It should show 0 bytes. If not, clear again.
    next go to iTunes and App Store in settings, and touch your Apple ID, the select sign out.
    AFter you you sign out of your ID, restart your iPad by holding down the power button and home key simultaneously until you see the apple logo after the restart.
    when you are powered up, go to iBooks. You should get a message that you need to sign in to sync up your books. Sign in, and that should do it.

  • Since I upgraded to the maverick system. My macbook pro will not read my USB pen. How do I sort this problem out

    Please can someone help!
    SInce I upgraded to the maverick system, my macbook pro will not register my USB anymore.
    Regards
    SP

    Hi,
    Are you sure you don't have unpluged it, without ejected it before?

  • Since I upgraded to IOS8, iphone has changed the way it calls via car bluetooth.  Before (IOS8) once I hit 'call' it was transfer to car speakers and i would hear dial tone until answer.  Now, call will only transfer to speakers once call is answered

    Since I upgraded to IOS8, iphone has changed the way it calls via car bluetooth.  Before (IOS8) once I hit 'call' it was transfer to car speakers and i would hear dial tone until answer.  Now, call will only transfer to speakers once call is answered.  This is very incovenient as I never know if my call is going through, and sometimes when call isn't answered immediately I have to look at my phone to cancel the call.  Is there a new setting I am missing?

    Sometimes you turn off your Bluetooth and then back on and it doesn't reconnect with your phone unless you go into the menu. Either way doesn't help much if someone calls you while you're driving and you realize your iPhone is stuck on headphone input.

  • Iphoto library files changed since upgrade

    Since I upgraded to 6.0.5 my iphoto library isn't sorting as it use to. I use to go to photos>iphotolibrary>year>month>date>title. But now I get to iphoto library>year and now it no longer has month date and title. It show originals, and rolls. Is there anyway to change this back to searching by date. Please help me, I'm a bit frustrated thanks.
    mac osx   Mac OS X (10.4.8)  

    lossofhearing
    Dave E is correct, the library file is updated when you upgrade to v6 and can no longer be read by earlier versions. There are also changes, as you've noticed, in the layout of the iPhoto Library Folder:
    In this folder there are various files, which are the Library itself and some ancillary files. Then you have three folders
    Originals are the photos as they were downloaded from your camera or scanner.
    (ii) Modified contains edited pics, shots that you have cropped, rotated or changed in any way.
    This allows the Photos -> Revert to Original command - very useful if you don't like the changes you've made.
    (iii) Data holds the thumbnails the the app needs to show you the photos in the iPhoto Window.
    iPhoto is designed so that you never need to go to the iPhoto Library Folder. Everything you need to do can be done via the iPhoto Window, and should be. Dave E has given some tips as to how to achieve some things, and if you need more, feel free to post again.
    It is strongly advised that you do not move, change or in anyway alter things in the iPhoto Library Folder as this can cause the application to fail and even lead to data loss.
    Regards
    TD

Maybe you are looking for