USB Charger Works With BF's iTouch But Not With Mine?!

Hello! My apologies for this being a bit long even though the problem is pretty straight-forward:
Both my boyfriend and myself have the iPod Touch 4 G. I bought mine a few months ago and bought his for a Valentine's Day present for him on Feb 14th of this year. So about a week and a half ago or so. So, the problem is with charging them. I have a Powerline dual usb wall/car charger that's been working fine for about three years. It will charge my tablet PC and it will also charge my boyfriend's iTouch. It will not, however, charge my iTouch. I can charge my iTouch through the computer or through our wifi router's usb port but as soon as I plug it into our wall charger: zip. If I plug it into the wall charger while the iTouch is turned completely off the iTouch will boot up instantly after being connected to the wall charger but it won't charge at all. Anyone have any suggestions?
Maybe I will just have to get a new wall charger for my iTouch. I really need one as I am going to be staying with my grandmother for the month of March and she has no computer or anything for me to charge my devices on other than the wall socket. It's just odd that my wall charger will charge my boyfriend's iTouch and mine will boot up when connected to it, but it won't charge it at all. Thank you for reading this and hopefully providing me with a workable solution. Oh, yeah, forgot to mention; I reset and restored my iTouch and tried it again. No luck. At least it's charging via other means; computer/wifi router, but I'd like to find out why the wall charger is only charging one of our iTouches.
I have tried resetting the device and I have also tried restoring it to factory settings and starting from scratch. I have tried other usb iPod usb cord/plugs, (we have three; one's mine, one's for my boyfriend's iTouch and one's left over from an upgraded iPod), and I have tried plugging the charger into different wall sockets. Like I said; it will charge the boyfriend's iPod fine and my iPod will boot up from complete shut down when plugged into the wall charger but it won't start charging.
Thanks!
~Ami E. Bowen

I am replying to my own question because this is how it was solved, for me at least. Since I was still within my 1-year warrenty I simply took my iPod Touch down to our local Apple Retail store and they traded me the faulty one for a brand new one. I went home, plugged it in to all the chargers one by one and every one works fine with the new one. So, if you have this problem, too, and are within your warrenty, I'd suggest going to your local Apple Retail Center and trading the old/faulty iPod for a new/better one.
~Ami E. Bowen

Similar Messages

  • USB port Working for my Wireless mouse but not working for another Devices like Flash Memory ?, USB port Working for my Wireless mouse but not working for another Devices like Flash Memory ?

    USB port Working for my Wireless mouse but not working for another Devices like Flash Memory ? Anyone can help me plz?

    Hi, is this a question" Post?
    or are you just offering an insight into your Mouse Issue?
    Generally and at times we all have little idiosyncrasies appearing with the running of our Macs.
    I use the same Logitech BT with my MBP. MB & iBook..(not at the same time) Only ever had one issue
    and the cure was to completely Delete the mouse from BT -> Repair Permissions & Reboot then Re Install the BT mouse..Ihave just put a new set of batteries in the Logitech (only 2nd set ever)...L

  • Windows XP - ok with 4.6.21 but not with 4.7.25 (getting_started example)

    I'm new to this.
    I have installled BD 4.7.25 and 4.6.21 from the msi onto my Windows XP (SP3) m/c
    When I compile the simple examples 'getting_started_examples' they
    work with 4.6.21 but not with 4.7.25
    The error happens in 4.7.25 when the dbp->open() is called:
    /* Now open the database */
    ret = dbp->open(dbp, /* Pointer to the database */
              NULL, /* Txn pointer */
              file_name, /* File name */
              NULL, /* Logical db name */
              DB_BTREE, /* Database type (using btree) */
              open_flags, /* Open flags */
              0); /* File mode. Using defaults */
    The error message is:
    illegal flag specified to DB_ENV->set_encrypt
    Any suggestions why this is happening?
    I am using lcc-win32 as the C compiler.
    Regards
    David

    Hi,
    You need to make sure you are using the dll of db4.7 rather than db4.6. Rebuild db4.7 dll and the example program, and make sure the db4.7 dll is used rather than that of db4.6.

  • I keep getting kicked off of my wifi with my MacBook Pro but not with my IPAD?

    I keep getting kicked off of my wifi with my MacBook Pro but not with my IPAD, what do I do?

    Hi, mmayers.
    Sometimes a simple power cycle of the router can correct the issue that you are experiencing.  However, the issue could be a little more complex.  Wi-Fi routers need adjustments to settings periodically for optimized performance with the constant progression of wireless device technology.  Below, I have included two articles.  The first article will cover basic Wi-Fi troubleshooting.  The second article covers the recommended settings for current Wi-Fi access points.
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/ht4199
    Cheers,
    Jason H.

  • How do I transfer photos/videos from my Iphone 5 to my Macbook Air. I can do so with my Iphone 4s but not with my Iphone 5

    How do I transfer photos/videos from my Iphone 5 to my Macbook Air. I can do so using my Iphone 4s but not with my Iphone 5

    See this User Hint: https://discussions.apple.com/docs/DOC-3141

  • I can use iMessage with all iPhone uses except for ONE person.  That person can use iMessage with all other users, but not with ME.  What's the problem???

    I can use iMessage with all other iPhone users that I communicate with, except for ONE person.  When I send to that person, it always goes through as a text message.  This person can use iMessage with pther people, but when they send me a message, it always goes as a text.  Why can we both communicate with other people using iMessage, but not with one another?

    Hi Russell,
    1) If you have OD set up and "editor" has UID 1111, then when they log in to any machine that's bound to OD as editor, they will get UID 1111. Therefore, there won't be any of these permission errors. This is typically the recommended approach.
    2) I assume you mean "You'd prefer to not using open directory?" Whatever the case, OD isn't mandatory with Xsan -- it's just that with multiple user accounts, managing them centrally tends to be easier. For 3 or 4 accounts and 3 or 4 machines maybe it's no big deal. If you go larger, it could get a lot more complicated. That said, if you set it up such that each machine has the exact same set of users (as you said, Mary = UID 502, Fred = UID 503, William = UID 504), then you can do what you want. Mary can log in from multiple machines at the same time, and in general you won't have permissions problems. Of course, if you try and read and write the same file from multiple workstations at the same time, you will get file locking issues, which will prohibit somebody from successfully writing the file.
    File locking issues are different from general permissions errors. The former basically says "hey, someone else is editing this file. Therefore I won't let you edit it right now... you can read it if you want though." Permissions means somebody saves it, and Xsan thinks you saved it and own the file, when you really don't.
    Quad-Core PMG5, 4 GB RAM, 7800 GT, 1 TB disk.   Mac OS X (10.4.4)  

  • Xfdf and pdf works in Adobe Reader 6, but not with new versions 7, 8, X

    I have a xfdf file which is created by querying a SQL data base and contains data for a pdf form; it works with Adobe Reader 6, but does not work with new versions of Adobe Readers (7, 8, 9 and X).
    It is an intranet site running IIS 6.0 in Windows Server 2003 Web Edition SP2 with Adobe 6 installed and client systems include XPSP2, XPSP3, Vista, Windows 7 with different versions of IE, Firefox.
    With new versions of Adobe Reader, click on the hyperlink launched the pdf form in a browser window without data; below is the link:
            // create shipping slip hyperlink
            string strLtrSlipUrl = "~/Archive/LtrShipSlip.pdf#FDF=" + lblWO.Text + "LtrShipSlip" + ".xfdf";
            HyperLink hlLtrShipPdf = new HyperLink();
            hlLtrShipPdf.Text = "Ltr Shipping Slip";
            hlLtrShipPdf.NavigateUrl = strLtrSlipUrl;
            hlLtrShipPdf.Target = "_blank";
            pnlLtrShipSlip.Controls.Add(hlLtrShipPdf);
    I have installed new versions of Adobe Reader in the Web server (to match what the clients are using), but results are the same – blank pdf.
    I uninstalled the new versions and installed version 6 and the pdf and xfdf worked happily together, but we need new versions of Adobe Reader in the client computers.
    Thanks for helps and suggestions – I have read articles about using iTextSharp to create pdf documents from .NET apps, but that would be my last choice.

    Adobe Reader 9 can't save the old FDA forms. FDA must update their forms.

  • How to open .snp files with Microsoft Office 2007 installed? It works with MS Office 2003 but not with MS Office 2007!

    I have MS Office Pro Plus 2007 installed on my computer. I also have MS Office 2003 installed on another computer. Snapshot viewer is installed on both. My work snapshot files works with MS Office Access 2003 but not recognized by MS Office Access 2007. It would not allow me to save them either! Is it a problem with FireFox (3.6.8)? However, I do not have problem opening them up using IE7/8 on both computers. Any ideas? Thanks.

    Are you clicking a download link from an email message on an OWA or webmail site? Do you get the open/save dialog for the .snp files? In that case, you should be able to associate them with the Snapshot viewer. If Firefox does not remember this and you have to do it each time, it usually indicates that the server is not sending a specific content type, just the generic "this is some binary content" content type.

  • Class loading works with jre1.3.1 but not with jre1.4.0

    Hello,
    My JWS application use the following line to create an XMLReader:
    XMLReader rdr = XMLReaderFactory.createXMLReader( "org.apache.xerces.parsers.SAXParser" );
    Everything works fine with jre1.3.1, but with jre1.4.0 or jre1.4.1 I experience a very strange behaviour:
    1) When my application is downloaded and executed for the first time, everthing works fine.
    2) When I quit the application and I launch it again, an Exception is thrown (the system in unable to load the Class org.apache.xerces.parsers.SAXParser).
    3) If I tell JWS to show the console, everthing works fine again. If I tell JWS not to show the console, the Class can't be loaded anymore.
    Any idea ?

    Hi.
    I have also been experiencing problems in using Java Web Start for my application. When i tried certain functions of my application like saving and updating, I will faced this problem:
    javax.xml.soap.SOAPException: Unable to create SOAP connection factory: Provider com.sun.xml.messaging.saaj.client.p2p.HttpSOAPConnectionFactory not found
    In the previous email in the forum, it was said that this problem was overcame, but I do not really know to how apply the solution given below:
    /* The following code is not used for now because
    * the code in createXMLReader() which dynamically          
    * allocates the class does not work the with          
    * Web Start class loader.          
    * This can be used again once Sun starts shipping          
    * Xerces 2.x with the JRE. They have already changed          
    * the XML development pack to use Xerces 2.x instead          
    * of Crimson, but as of 1.4.1, they are not updating          
    * the JRE distribution.           
    //String className = System.getProperty("org.xml.sax.parser");     
    //if (className == null) className = "org.apache.xerces.parsers.SAXParser";          
    //try {          
    //     tParser = XMLReaderFactory.createXMLReader(className);          
    //} catch (SAXException e) {          
    //     tParser = XMLReaderFactory.createXMLReader();          
    XMLReader tParser = new org.apache.xerces.parsers.SAXParser()
    Can anyone enlighten me on how to overcome the SOAP Factory problem? Thank you.

  • Cs4 work with 10.10.1 but not with 10.10.2

    CS4works sith 10.10.1 but won't with 10.10.2. Any ideas?

    As CS4 is not supported anymore you will have to upgrade to a later version.
    Even if it was running on 10.1 I would not recommend to go back, as it was also an unsupported OS and it is not guaranteed that it would always work and you would have to live with bugs which have been repaired with 10.2 from Apple.

  • Can video chat with Imac non-intel but not with Powerbooks

    Hi,
    I have a Linksys WRT54G firmware v. 1.0.6 connected to a Comcast Cable modem. My IMac Intel Duo (OS 10.4.6) is connected via ethernet cable to the router. I am set to DHCP on router and IMac. My Quicktime settings is at 1.5mb, I have tried with firewall off and on with the appropriate ports open. I have tried upnp on and off.
    I can connect to other Imacs (non-intel) but not to powerbook G4's. With the Powerbooks I can text chat, but sometimes they can see my text, but I can't see theirs. And every video chat is a fail to respond with the powerbook, but they can connect with others.
    Is there anything else I can do?
    Please help. Thanks.

    Hi cmbell,
    Do you know how to access your modem ?
    This should give you somewhere to turn off DHCP.
    Then you go to System Preferences > Network and select the connection method you are using.
    Then select the TCP/IP tab.
    In the drop down that says Using DHCP change it to Manually. (or Manual with DHCP if doing James' way)
    Type the IP you wish to use in the next entry field.
    Copy the subnet mask form the Using DHCP
    Copy any DNS servers listed.
    Copy the router IP address which will be the modem or router in question.
    Hit Apply.
    Done.
    9:23 PM Sunday; May 7, 2006
    Message was edited by: Ralph Johns (UK)

  • IPod nano second gen. works with iTunes 7.5, but not with iTunes 7.7

    I recently got a new computer and downloaded iTunes 7.7. My iPod would charge for two seconds then disconnect. I tried using the other computer at my home which uses iTunes 7.5 and it works perfectly. It seems like alot of people are having the same problem. Do you think Apple will fix the new version of iTunes?
    I have tried doing this : http://docs.info.apple.com/article.html?artnum=304434
    and it worked, but the next day my iPod wouldn't charge or connect. I tried doing the same as I had did yesterday to get it working, but it doesn't work.
    I have also tried plugging iPod into all my USB ports, but still no luck.
    Anytime I restart my computer and open up Services, Terminal Services is always shown as stopped. Could this be the problem?
    One last question: Could a firewall on my computer possibly be the problem?
    Thanks in advance.

    Open the file using QuickTime Player 7.6 and then open the Movie Inspector window.
    It will tell you what codecs are used or show the video track "type". My guess is that your file contains a Flash video track which will not play in QuickTime higher than 7.3.

  • Why does data/3g work on my O2 sim but not with Three sim (iphone 5)?

    as the title says...
    i have been using an O2 sim for a while in my iphone 5 without problems.  today i tried a sim from the three network.  calls and texts work fine, but i can not get any data connection to work.
    i have been on the phone to three and tried many different settings/network resets etc. 
    when  i put the sim in the phone updated automatically - i was directed to go to "settings>about", where it asked me to update. i clicked yes. after a long phone call with three, they say all my settings are correct. 
    i have tried the same sim in an iphone 4 and the data works fine with it, so there's definitely something a miss with the actual iphone 5 handset.
    i am running ios 7.0.4
    (in setting > about)
    carrier: Three 15.6
    Model: ND662B/A
    Modem firmware 5.02.00
    any ideas?
    thanks 

    Hi. :)
    Thanks for the reply.
    When I insert the three SIM card there is no option for apn. From what I've read, three do not allow it. The apn settings show up fine with my O2 sim.
    I have noticed something strange when playing about with the data. If I open tunein radio app with wifi and steam a live broadcast, if I switch on data and then switch off wifi, the stream still plays. Then when I look at my data usage it shows data has been used. If I try and use data at the start of the app, it will not connect and I still can't get the data to work on anything else. So some slight element of the data connection is getting through.

  • How can I send emails to a list of email addresses using mail merge  feature in Microsoft Word for Mac? It would work with the power pc but not with macbook Air

    I want to send an email and personalize it to several contacts. I could always do it with my old Power PC using Microsoft Office Word for Mac but cannot access my emailoption when I use the Macbook Air. Anyone have a solution??

    No way for us to know for sure (without similar product/issues) but the
    HP Support site suggests that with the current Mavericks OS X 10.9.x
    their drivers should be available through Apple Software Updates:
    http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/HP-Product-Support-using- Apple-Software-Updates-for-new-OS-X/td-p/3086229
    However that may be limited to certain models of printers or scanners that
    already had been known to be working under OS X as of that date in a
    prior OS X (such as 10.8.5, 10.7.5, 10.6.8, etc) with earlier product support.
    •Drivers and Downloads for Printers, Scanners, & More - HP Support:
    http://www8.hp.com/us/en/drivers.html
    A link to Mac OS X Support's List Printer & Scanner software (HP+ Other)
    •OS X: Printer and scanner software available for download
    HP Officejet t65 All-in-One Printer
    {According to this page, your old printer has only Windows & Linux drivers
    but you may or may not look into third-party driver support through such
    sites as Gimp; though unlikely to be available with Mavericks, or Yosemite}
    •HP Support Forum - Home:
    http://h30434.www3.hp.com/psg/?lang=en&cc=us
    You may be able to get a deal on a new printer as they are rapidly obsoleted.
    PS: edit to add... there was a Gutenprint driver reference for T65 Printer here:
    Mac OS X 10.5: Included printer drivers
    Yet a driver for ancient Leopard 10.5.x may not be suitable for Mavericks 10.9.x
    but the Gutenprint lead may be helpful to locate whatever may exist; or not.
    https://www.google.com/?gws_rd=ssl#q=gutenprint+mavericks
    Good luck & happy computing!
    edited

  • DAQ card works with NIDAQ test panel but not with VB app/Component works

    I am seeing this problem with 2 different DAQ cards. The card works fine with the NIDAQ test panel, but acts like the return lead is lifted with my VB app. The plotted signal appears to be little more than noise. Channel scan is internally triggered; that apparently works fine. The VB app is running in this configuration successfully in other areas, and I fixed this problem once by swapping cards. Currently, I lack a spare, as my "spare" is showing the same symptoms. Any helpful hints?
    Card type: AT-AI-16XE-10
    Configuration: Double-ended input, +/-10V range
    Running: VB6, NIDAQ 6.1, ComponentWorks Std. 2.0.1, Windows NT 4.0 SP5

    I upgraded to NI-DAQ 6.8.1 (with patch), but no joy. The upgrade went smoothly, the card was recognized and I was able to set the resources without a problem. The test panel works fine looking at the actual signal on the target system: slowly varying DC between 0-5 V or so. My app works fine also, except that it behaves as though the A/D is not connected to anything: noise between .05-.1 V or so. I swapped DAQ cards between the test system and my development system. The problem appears to be in the test system, not on the card. Another test system, identical except for (now) the version of NI-DAQ, works fine. I'm stumped!
    BTW, why are there 3 DMA channels listed in the configuration for this DAQ? Do all 3 need to be assigned? I've run some systems
    for years with only the first 2 assigned.

Maybe you are looking for