USB Charging not working after 1.2.0
Charging via my car charger or an outlet works fine, but using my computer doesn't seem to work anymore. This is a potentially a huge issue as I rely on the mid day charges to keep my phone working during busy days. Any solutions out there?
Thanks!
Post relates to: Pre p100eww (Sprint)
This question was solved.
View Solution.
Hello!
Could you try:
1. Unplug the cable from the Pre and PC.
2. Restart the Pre.
3. Reseed the USB cable to the Pre and PC. Choose option Just Charging.
Should see a silver-looking lightning symbol over the battery indicator afterwards. Do make sure to try both front and back usb ports on you PC.
Similar Messages
-
ZTE Mf190s Internet USB Modem not working after upgrading to Yosemite.
ZTE Mf190s Internet USB Modem not working after upgrading to Yosemite. any salutation!!
Follow these steps:
go to system preferences.. Open Network..
CONFIGURATION: DEFAULT
TELEPHONE NUMBER : #99*
leave account name and password columns blank
Now go to ADVANCED
IN MODEM MENU
VENDOR : GENERIC
MODEL : GPRS / 3G
Press ok
Then CONNECT.. Enjoy. -
Charger not working after upgrade iPad air to ios8
My iPad air charger not working after install ios8, can anyone help please, thanks
Hey andon,
The “voice-to-text” feature you are referencing uses Siri to translate your voice into text, so you will want to use the following article to help you troubleshoot this issue:
iOS: Troubleshooting Siri
http://support.apple.com/kb/TS4079
Thanks for being a part of the Apple Support Communities!
Regards,
Braden -
SA30 USB do not work after reinstall, please help!!
Hi, my SA30's USB do not work at all after reintalling, I do not have the original CD with the laptop as it is a gift from my mate.... I couldnt find the driver from the website, please could anyone help me???
I could use the USB mouse but when I plug the external hard disk in, it has no responses, I tried to search for new hardware, it couldnt detect it. Any information would be appreciate, cheers.When you instll another OS than the recovery OEM OS you have to install the drivers and tools in a right order!
This order is on the Tools & Utilities CD in a html file! When you follow these order all hardware should be detect!
Also you can go to http://eu.computers.toshiba-europe.com and download the drivers
Bye Hans -
Usb port not working after yosemite update please help
ive got an early 2011 macbook pro i5. and one of my usb stopped working. if i reset my computer it works for a while and then stops again. all these after yosemite update please i really need help on this.. and also when ever im in the middle of something it keeps crashing and saying these things below after i booting back up. ive tried several things, didnt work, tried repairing disk permissions. please anybody with any idea help me!
Anonymous UUID:
CCC4DCA9-48E9-4692-250B-488588FCC69E
Sun Nov 9 17:58:17 2014
*** Panic Report ***
panic(cpu 0 caller 0xffffff802a005eb2): "Possible memory corruption: pmap_pv_remove(0xffffff803b8db998,0x7fff7360f000,0x6d654, 0x6d654d64, 0xffffff8031663cc4, 0xfffffeb38ae0f078): null pv_list!"@/SourceCache/xnu/xnu-2782.1.97/osfmk/i386/pmap_internal.h:768
Backtrace (CPU 0), Frame : Return Address
0xffffff8031663b80 : 0xffffff8029f3a811
0xffffff8031663c00 : 0xffffff802a005eb2
0xffffff8031663cf0 : 0xffffff802a0065e5
0xffffff8031663d50 : 0xffffff8029fb6b4a
0xffffff8031663e60 : 0xffffff8029facd2c
0xffffff8031663e90 : 0xffffff8029f5c747
0xffffff8031663ed0 : 0xffffff802a3c45ff
0xffffff8031663f40 : 0xffffff802a3c425c
0xffffff8031663f50 : 0xffffff802a44dcb2
0xffffff8031663fb0 : 0xffffff802a03ac46
BSD process name corresponding to current thread: suhelperd
Mac OS version:
14A389
Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
Kernel slide:
0x0000000029c00000
Kernel text base: 0xffffff8029e00000
__HIB text base: 0xffffff8029d00000
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
System uptime in nanoseconds: 7052072843826
last loaded kext at 6483411185500: com.huawei.driver.HuaweiDataCardActivateDriver 1.0.12 (addr 0xffffff7fac6ba000, size 16384)
last unloaded kext at 6604174049015: com.apple.driver.AppleUSBCDC 4.2.2b5 (addr 0xffffff7fac717000, size 16384)
loaded kexts:
com.huawei.driver.cdc_ncm 2.7.2f16
com.huawei.driver.dc_net 1.0.2
com.huawei.driver.cdc_acm 2.6.2f17
com.huawei.driver.cdc_usb_bus 1.0.3
com.huawei.driver.HuaweiDataCardDriver 4.25.45
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AudioAUUC 1.70
com.apple.driver.AGPM 100.14.37
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.3.0f10
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 266.5
com.apple.driver.AppleMikeyDriver 266.5
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.ApplePolicyControl 3.7.21
com.apple.driver.AppleLPC 1.7.3
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleHV 1
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleIntelHD3000Graphics 10.0.0
com.apple.driver.AppleIntelSNBGraphicsFB 10.0.0
com.apple.driver.AppleBacklight 170.4.12
com.apple.driver.AppleMCCSControl 1.2.10
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.0f10
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleThunderboltIP 2.0.2
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleIRController 327.5
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.7.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.5
com.apple.driver.AppleUSBHub 705.4.1
com.apple.iokit.AppleBCM5701Ethernet 10.1.2b3
com.apple.driver.AppleFWOHCI 5.5.2
com.apple.driver.AppleSDXC 1.6.5
com.apple.driver.AirPort.Brcm4331 800.20.24
com.apple.driver.AppleAHCIPort 3.0.7
com.apple.driver.AppleUSBEHCI 705.4.14
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0
com.apple.nke.applicationfirewall 161
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 218.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.0
com.apple.iokit.IOUSBMassStorageClass 3.7.0
com.apple.AppleGraphicsDeviceControl 3.7.21
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 11
com.apple.driver.DspFuncLib 266.5
com.apple.kext.OSvKernDSPLib 1.15
com.apple.iokit.IOAudioFamily 200.6
com.apple.vecLib.kext 1.2.0
com.apple.driver.AppleHDAController 266.5
com.apple.iokit.IOHDAFamily 266.5
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.iokit.IOSurface 97
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleGraphicsControl 3.7.21
com.apple.driver.AppleBacklightExpert 1.1.0
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.driver.AppleSMBusController 1.0.13d1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.0f10
com.apple.iokit.IOBluetoothFamily 4.3.0f10
com.apple.driver.IOPlatformPluginFamily 5.8.0d49
com.apple.iokit.IOUSBUserClient 705.4.0
com.apple.driver.AppleSMC 3.1.9
com.apple.driver.AppleUSBMultitouch 245.2
com.apple.iokit.IOUSBHIDDriver 705.4.0
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.0
com.apple.driver.AppleThunderboltNHI 3.1.7
com.apple.iokit.IOThunderboltFamily 4.2.1
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.iokit.IOFireWireFamily 4.5.6
com.apple.iokit.IO80211Family 700.52
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.7.0
com.apple.iokit.IOUSBFamily 705.4.14
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 389.1
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.Libm 1
com.apple.kec.pthread 1
Model: MacBookPro8,1, BootROM MBP81.0047.B04, 2 processors, Intel Core i5, 2.3 GHz, 4 GB, SMC 1.68f96
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.24)
Bluetooth: Version 4.3.0f10 14890, 3 services, 19 devices, 2 incoming serial ports
Serial ATA Device: ST9320325ASG, 320.07 GB
Serial ATA Device: HL-DT-ST DVDRW GS31N
USB Device: Hub
USB Device: HUAWEI Mobile
USB Device: IR Receiver
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
Thunderbolt Bus: MacBook Pro, 20080d.0I have the same problem when I updated to OS X 10.10 I lost both my USB ports as far as they will not recognize anything that I plug into them. The power part of the USB seams to work since it will recharge my Striiv Touch but nothing shows up when you connect anything to the ports.
I have tried a number of things from rebooting, trying other usb devices that work on other systems with no problems but will not work on my Macbook Pro.
Any Help out there?
Hardware Information: ℹ️
MacBook Pro (Retina, 15-inch, Late 2013) (Verified)
MacBook Pro - model: MacBookPro11,3
1 2.3 GHz Intel Core i7 CPU: 4-core
16 GB RAM Not upgradeable
BANK 0/DIMM0
8 GB DDR3 1600 MHz ok
BANK 1/DIMM0
8 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n/ac
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 1:43:41
USB Information: ℹ️
Apple Internal Memory Card Reader
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad -
USB Keyboard not working after running Monolingual
Okay, I'm not a Mac person and should have known that I was going to mess up my mother's iMac, but here it is -
In an attempt to improve the mac's performance I performed all of the actions described in the following article: 11 Ways to Optimize your Mac's Performance ( http://lowendmac.com/eubanks/07/0312.html ). Basically, I cleaned up files and 'other' system preferences. Things seemed to be fine and the computer did run much better. However, after running Monolingual and deleting what I understood to be 'unnecessary' PowerPC files the standard USB keyboard is no longer working.
I've tried to search for various remedies, but have come to a dead end. So I'm left with reinstalling the Snow Leopard OS (I think it is 10.6.8?) BUT I can't because it is asking to input the account password (which I know) to make the change and I can't figure how to do that when the keyboard not working.
Any help would be great!
*feeling like a bone head*How are you trying to reinstall Snow Leopard? If you're booting from the Snow Leopard or iMac Install DVD that came with the system then that should eliminate any of the issues you may or may not have caused when you deleted did the clean up work on your mom's system.
I suggest trying the following:
0) Verify that the caps lock key is off. It can make inputting passwords difficult if you don't realize it is ON.
1) Reset the PRAM by restarting the system then quickly press the command-option-P-R keys before the gray screen appears. Wait until you hear the computer restarts two times as indicated by the startup chime. For more info refer to http://support.apple.com/kb/ht1379.
2) If the issue persists after the PRAM reset then boot from the Snow Leopard or iMac Install DVD, whichever you have. Once you see the menu asking you to choose a language try using the arrow keys on the keyboard to move the language choice selection. If the arrow keys are working at this point it indicates your keyboard is at least partially functional. Go ahead and select the language then proceed to step 3.
3) Once the next screen appears move the cursor up to the menu bar area and pull down the Utilities menu. Select the 'Terminal' application. Once the Terminal application launches try typing the various keys on the keyboard and check to see if the correct characters are displayed. Please let us know if you detect any errors. If there are no errors then you should be able to quit the Terminal application and proceed with reintstalling the OS. -
Hi,
I have lenovo G580 (20157) model. previously i had installed Windows 7 and Ubuntu 12.04 with no problem. Today i decided to go for windows 8.1. it installed perfectally without any issue ( Legacy mode non UEFI ) and working fine but ubuntu live USB is not booting up, when i select Boot from USB windows 8 starts. I really need Linux in my laptop. Could anybody help ASAP.
Solved!
Go to Solution.This guide is not System Specific and not all of the option may show inside a certain BIOS version, Just Make sure that all optionlisted here that is available on a Lenovo BIOS is set as follows.
Ideacentre BIOS Menu is F1 and F2 for Ideapad.
Under Exit TAB
OS Optimization
OS Optimized
For the two options above: Should be set as Disabled or Other OS
Under Boot Tab / Start up Tab
Boot Mode Should be set to Legacy
Boot Priority Should be set to Legacy First
UEFI Boot should be set to Disabled
Quick Boot should be Disabled
StartUp device Menu prompt should be Disabled
Quick Boot Should be Disabled
USB Boot should be Enabled
Secure boot Should be Disabled
Once everything are Set, make sure to save all changed by hitting F10 and Enter for Yes
After Hitting enter It will Restart and You will have to keep on tapping F12
this should pull up the Boot Menu letting you select where to boot.
If not succesful pulling up the boot menu after the restart, Power Drain the System and turn it on while hitting F12 Again.
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Usb devices not working after 2.6.38 kernel upgrade
Hello everyone,
today I've upgraded my aur system to the latest packages version , kernel 2.6.38-2 .
After the reboot the usb keyboard doesn't work at all , as the usb mouse, leaving me struck at the login screen .
If I try to modify kernel boot parameters in grub or in a live distro (sysrescd) the keyboard works flawlessy .
Any clue ?
thanks in advanceI just updated to 2.6.38.7-1. The USB devices that I have plugged in before booting work (e.g USB headset). If I try to insert a new USB device, it isn't recognized. Flash-disks and USB mice that worked under the last kernel aren't working at all.
Is there a command that lets you "turn on" a USB device, or force the kernel to recognize it? I tried messing around in /sys/bus, but even in the root shell, I got "invalid write" errors.
Interesting snippet from dmesg;
[ 19.399041] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[ 19.399447] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[ 19.412940] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[ 19.413381] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[ 151.340126] uhci_hcd 0000:00:1d.0: PCI INT A disabled
Here's where it finds my webcam;
[ 9.626704] usb 2-5: new high speed USB device using ehci_hcd and address 3
[ 10.381678] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input15
[ 10.381759] usbcore: registered new interface driver uvcvideo
.. and where it finds the mouse I had plugged in (you can see me disconnect it at entry 148);
[ 10.490045] usb 5-1: new low speed USB device using uhci_hcd and address 2
[ 11.201856] input: Dell Dell USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input16
[ 11.202001] generic-usb 0003:413C:3012.0001: input,hidraw0: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:00:1d.0-1/input0
[ 11.202017] usbcore: registered new interface driver usbhid
[ 11.202019] usbhid: USB HID core driver
[ 148.846756] usb 5-1: USB disconnect, address 2
When I try to reconnect the mouse, nothing happens. You can see that the kernel has this error repeatedly;
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
Edit: Found a temporary fix*.
# cd /sys/bus/usb/devices/
# for device in usb*; do echo "on" > $device/power/control; done
* I'm not responsible for what happens to your devices when you run this, but it worked for me. Check out: http://www.mjmwired.net/kernel/Document … gement.txt
Last edited by vkumar (2011-05-28 04:28:05) -
New T400 - Mini Dock USB Ports not working after hot dock
Hello,
just got a new T400 at work. I know this issue was common with the R60...however I figured this would be resolved with the T400. After PROPERLY undocking my T400 (Start -> undock -> wait for notification and green light)..... I go off to my meetings, etc and all is well with the world. When re-dock the machine, the USB keyboard and Mouse (and sometimes the monitor) will not re-engage. Sometimes I get the monitor...and no keyboard and mouse.
Any ideas on this? Kind of frustrating because I usually have to re-boot (or unplug the mouse/keyboard/ monitor from the dock and plug them directly into the laptop...which defeats the purpose of the dock).
Appreciate the help!
Roberti have the same problem with a R60 and advanced minidock (winXP SP3). it worked for three years now, but since about one month, when returning to dock, my USB mouse only works in about one of five cases. monitor-usb same problem. keyboard is an old PS/2, this always works. i need to plug the mouse directly to the R60, then it is recognised and works as expected. i do driver updates quite regular, so maybe one of the last drivers have a bug?
-
Usb ports not working after mavericks install
After installing Mavericks on my mac pro the usb ports are not working for my printer or other usb drives. the only item i can get to be seen via usb is an apple optical mouse. any suggestions would be great.
Hi there grnded189,
You may find the troubleshooting steps in the article below helpful.
OS X Mavericks: If a USB device isn’t working
http://support.apple.com/kb/PH13876
You may also want to reset the PRAM and SMC as well.
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/ph14222
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
-Griff W. -
P45 Neo3-fr USB Charging not working
Hi,
I'm looking for a solution for this little problem. Everything working fine exept this thing. If I plug my Blackberry via USB, I have this massage on the screen. USB charging current is not sufficient. Same thing if I try to charge my MP3 player.
I'm using Vista 32bit.
thanksPlease make a list of all your components including your PSU( listing the amps for all the rails).
>>Posting Guide<<
Are you using the case USB connectors or the ones in the I/O cluster? -
USB ports not working after OSX 10.9.1 update
I have a late 2011 MBA 13".
The 2 USB ports stopped working as soon as I updated to 10.9.1.
I tried zapping PRAM and resetting the SMC.
I even turned the thing off for hours and still nothing.
Any idea how to fix?
Everything was fine until I did the update.
Thanks.This is not a known bug affecting 2011 MBA computers with 10.9.1 so there is something wrong with your installation. Since zapping PRAM and resetting the SMC did not work I suggest that you try one of two things but first make sure you have backed up your computer.
1) download Mavericks and reinstall it. Sometimes an update goes awry and a reinstall fixes it. Since doing this won't disturb any of your data or applications it would be my first choice. You'll be downloading 10.9.1 so you won't have to perform any updates.
2) boot into the recovery mode, erase the hard drive and then download and install Mavericks. Once Mavericks is finished installing you'll be asked if you'd like to migrate data and applications from a backup. Say yes and if your backup drive isn't already connect it, do so. Select your applications folder and account folders from the list and let the Setup Manager do its magic.
BTW - this is why one of my several backup hard drives is a cloned backup using Carbon Copy Cloner (SuperDuper! Is another good choice). I can boot up my computer using this backup and download the newest version of Mavericks on it if I haven't already done so. I always quit the installer first and make a copy of it because the installer program deletes itself once it is finished which is something of a pain. It gives me more options including being able to boot my computer with it, erase the computer and copy the installer to the computer rather than having to perform the download all over again if step 1 fails. Since I always download a new copy of the OS when Apple releases an update this computer will have the newest version of the installer so I also can skip the download step of option 1 and just copy it over and install on the computer. -
I am having trouble charging my ipad. when I plug the usb charger into the ipad it says charging for a split second then it says not charging and it won't charge. I am using the cord that came with the ipad and I am even plugging it into the home computer. Now What??
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Cheers, Tom -
Logitech USB Speakers not working after upgrade to Yosemite
After upgrading my MacBook Air to Yosemite, my Logitech Z305 USB speaker no longer work. In fact, it isn't even recognized in the Output list in Sound in the System Preferences. It worked nearly all the time with Mavericks, with an occasional need for a system reboot if no sound was coming out, but it was always displayed under the Output tab regardless.
I just killed the coreaudiod process in the Activity Monitor, but this didn't do anything of note.
Any ideas of what has to happen for these speakers to work again?
Here are the system specs:
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x1c2d
PCI Revision ID: 0x0005
PCI Vendor ID: 0x8086
Bus Number: 0xfa
FaceTime Camera (Built-in):
Product ID: 0x850a
Vendor ID: 0x05ac (Apple Inc.)
Version: 6.46
Serial Number: CCGBCM031JDL8LLX
Speed: Up to 480 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0xfa200000 / 3
Current Available (mA): 500
Current Required (mA): 500
Built-In: Yes
Hub:
Product ID: 0x2513
Vendor ID: 0x0424 (SMSC)
Version: b.b3
Speed: Up to 480 Mb/sec
Location ID: 0xfa100000 / 2
Current Available (mA): 500
Current Required (mA): 2
Built-In: Yes
BRCM20702 Hub:
Product ID: 0x4500
Vendor ID: 0x0a5c (Broadcom Corp.)
Version: 1.00
Speed: Up to 12 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0xfa110000 / 5
Current Available (mA): 500
Current Required (mA): 94
Built-In: YesI zapped the PRAM and SMC, but that did nothing. https://discussions.apple.com/docs/DOC-3604
The speakers are still not recognized, nor do they work. -
USB ports not working after downloading I tunes 10.1
After downloading I tunes 10.1, as prompted by I tunes, , I got the device not recognized message for my IPOD. Also, a bonjour error message. I un installed and re installed as per instructions and still had the problem worse-none of the USBs are working. They were working before I downloaded the new release of I tunes.
I believe this is a bad download-any idea how I can fix this problem?Please click on the first link first and then try the second link if the first one doesnt work
Intel USB 3.0 Host Controller Driver
OR
Intel USB 3.0 Driver for Intel® NUC
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP
Maybe you are looking for
-
Oracle 8.1.5 Memory bug!?!
Hi ! I have a serious problem concerning the use of Oracle as db for upcoming projects. Current situation: - Platform: Windows NT 4.0 server - DB: Oracle 8.1.5 - JDBC: 1.1 which comes with the Oracle 8.1.5 Problem: - I have developed an ServletBased
-
Photos on CD made by Dell Desktop - trying to open in Macbook Pro
I have a CD-R with photos that was made on a Dell desktop computer. When I put the CD in my MacBook Pro it doesnt read the CD. Is there a way to convert these photos so that my MBkPro can read the CD?
-
How to connect printer epson l210 to airport express
How to connect and setup printer epson l210 to airport express
-
I can't access iTunes Store or App Store featured on iTunes and iPhone
I recently purchased some apps from the App Store on my iPhone and then tried to remove my payment card but my iPhone said it 'Can't connect to store' something along those lines. So to remove the payment card I used iTunes on my Windows PC. That wor
-
I have been tasked with updating an old Corporate video with new music, sounds, graphics and narration. The ONLY video-camera material I have is from a corporate DVD (NTSC) - the original source material is simply not available. . I can rip the DVD