USB, compact flash and N8

I'm trying to connect a Nikon camera with compact flash via usb to my N8. I get the message "usb not recognized".
I get the same when i remove the card and try to read it through a card reader.
Any help?
Camera: Nikon D700
Phone: Nokia N8
Card: Sandisk CF Extreme III 2Gb

N8's USB OTG supports some things and not all.
For instance, it supports Kingston Pen Drive of 8 GB, etc.
But it won't support HP Drive of 4 GB.
Secondly, it only support some keyboards, not all.
So, I would suggest you get a different card reader from a friend and try...
Otherwise, use a SD to compact flash adapter, with a Micro SD Card and then use that card with card readers or Micro SD slot of your N8...
==============================
My Story: Used 6670, Used N91, Used N8, Using Pureview 808 now. I requested Nokia to get N91's sound quality and features in the latest phones. No response from Nokia!

Similar Messages

Zio! USB Compact Flash Reader not recognized

I have a Zio! USB compact flash reader that works perfectly on my Cube and my wife's iMac (17" gooseneck), both running 10.4.9. However, my new MacBook 2.16 doesn't recognize it at all. The indicator light on the Zio! does light up, so I know it is at least getting power. Oh, and for the record, the MacBook is running on AC so I know it's not a batter power question.
The MacBook does recognize a Kodak camera hooked via USB and also recognizes a Logitech USB trackball that I have.
Zio! was acquired by Sandisc in 2005 and their website is no help. Also, the Zio! didn't come with a driver, it was always recognized immediately by iPhoto (which by the way, I'm running 6.0.6 and our other Macs are using an older version. Could it be that the newer iPhoto doesn't recognize this reader anymore?

I am not sure if I should start a new thread, but this is related...
I have an ULTRA 4G FlyDrive (which I LOVE and highly recommend, if anyone is looking/I DON'T recommend SanDisk Cruzers for Mac). Up until yesterday, it has worked with my MacBook without incident from Day 1 (didn't even need to be reformatted!) Suddenly it is not being recognized.
It does not seem to need a driver, and like your company's website, the ULTRA website is no help.
One suggestion someone offered was that the USB needed to be powered (or something like that). I still don't know what that means.
Any other ideas?

Is there a compact flash and SDXC card reader with USB3 and or thunderbolt connections that will work with new MacBook Pro retina laptops running OSX Mavericks please?

Is there a compact flash and SDXC card reader with USB3 and or thunderbolt connections that will work with new MacBook Pro retina laptops running OSX Mavericks please?

Yes, I too had this problem.
I was issued an update from Apple for a new version software as well as a new version of Lightrooom and now it shows up on the desktop and in finder as it should.
MacBook Pro Retina running 10.8.2 (12C54)
Lightroom running 4.1
Hope that helps.
aa

Formatting compact flash and installing palm software

I am attempting to replace a failed hard drive in my Palm Lifedrive. I have purchased a 4GB SanDisk Ultra II Compact Flash. How do I format this drive and get the palm software on it?
Post relates to: LifeDrive

You have to remove the old hard drive from your LifeDrive, solder in a Compact Flash Socket, then load all the system files and software onto the card.
I don't know what skills you possess, but it's not an easy task. I don' have a clue as to actually performing the surgery and what wire goes where!
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Save and read an image on compact flash

hi ;
I want to save an image in compact flash and i want read this image from this compact flash to display on the monitor ,i work with an FPGA spartan 3400a for dsp but i don't know how to do that ,any one help me please with a video or tutorial

Hi,
There are some reference user guides
http://www.xilinx.com/support/documentation/boards_and_kits/ug514.pdf
http://www.xilinx.com/support/documentation/boards_and_kits/ug458.pdf
http://www.xilinx.com/support/documentation/boards_and_kits/ug455.pdf
Regards
Praveen
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.
Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------

I have Photoshop Eleent 12 and use a Windows PC. I hae been using a Canon EOS 50D for several years, which uses a Compact Flash Card. I have always downloaded pictures by using a card reader wich I connect to my computer. I Go to the Organizer, click on

I have Photoshop Eleent 12 and use a Windows PC. I hae been using a Canon EOS 50D for several years, which uses a Compact Flash Card. I have always downloaded pictures by using a card reader wich I connect to my computer. I Go to the Organizer, click on "Import" and select "From camera or card reader". Once on the Photo Downloader, I select the pictures, chose the folder and click on "Get Media" and all the photos get downloaded. Today I folled the same procedure as always, but ZI'm gettig an error message that reads"Import Failed" followed by another message that reads "Nothing was imported. The file(s) or folder(s) selected to import did not contain any supported file types, or the files are already in this Catalog." I'm puzzled by this message and don't know what to do o get my photos. Any suggestions?

The organizer doesn't care where you send your photos when you download them via the downloader or where they happen to be when you first bring them in if you use the Get Photos command, but once your pics are in the Organizer, you *must* move them from within organizer or it can't find them. You don't have to use My Pictures at all if you don't want to, but regardless of the folder where you put your photos, if you want them someplace else, you use organizer to do it.

Need to know how to disconnect the camera Nikon Ds3 (USB cable) properly after uploading images through bridge-do not want to lose images on compact flash card.

Need to know how to disconnect the camera Nikon Ds3 (USB cable) properly after uploading images through bridge…do not want to lose images on compact flash card.

Give #navbar a width that is wide enough to hold all of the buttons within it.
#navbar {
width:####px;
Replace #### with a pixel number large enough to hold the nav buttons.

Issue with usb flash and removable hard drives in Lion. (also an install tip)

Having an issue with my usb flash and removable hard drives. I plug them in and Lion does not display all my files/folders, I take it out and plug it into my snow leopard machine and all the files/folders are there, does anyone have this issue?
It does it on my macbook pro which was a snow leopard upgrade to Lion and it does it on my macbook which was a clean install of Lion via a bootable flash drive.
The computers both work great in all other aspects, so there were no errors on installation. It's plain and simple, some files/folders are not showing up that are present on the drives and viewable on all other non-lion OS's mac and PC.
Also a word on installs, I highly suggest doing a clean install (delete and reformat drive them install Lion vs a snow leopard ugrade) my machine that was a clean install (macbook) runs 50% faster and smoother than the upgraded one (macbook pro).

Yes, you can use your backup disk drives in the manner you describe, but Apple provides conflicting information on the subject.
From Mac Basics: Time Machine
Time Machine can’t backup to an external drive that's connected to an AirPort Extreme, Time Capsule, or a drive formatted for Microsoft Windows ...
From Time Machine doesn't back up to AirPort Extreme AirPort Disks
Time Machine in Mac OS X v10.5 or later can be used to back up to many kinds of Mac OS Extended-formatted drives, but you cannot choose an AirPort Extreme 802.11n's AirPort Disk as a Time Machine backup volume.
However, you can choose Time Capsule AirPort Disks or internal disks as a Time Machine backup volume.
They have yet to resolve this discrepancy.
All other available technical details regarding Time Machine's use seem to indicate that a USB HD connected to Time Capsule should meet Time Machine's requirements. For what it's worth I have been using an external HDD connected to the Time Capsule's USB port and it seems to function just fine.

I have an iPad 2 and a Nikon DSLR. How can I transfer RAW/Tiff images using a compact flash card

I have an iPad 2 and a Nikon DSLR. How can I transfer RAW/Tiff images using a compact flash card? Plugging in the camera at the ipad connector doesn't seem to work, possibly due to lack of power.

This may apply.
Fix (for Nikon D800)
http://www.georgewheelhouse.com/blog/2012/10/ipad-ios-6-update---camera-connecti on-kit-fix
Are you using an SD, SDHC, or SDXC card? And what capacity?
 Vheers, Tom

My phone keeps flashing and beeping when connection to iMac via USB

my hone keeps flashing and beeping when i connect it via the USB to my new Imac
cant understand why it will not work

peterjimmyclark,
One of your USB connections may be loose/not fully inserted, or it may be a bad USB cable. It happened to me once, when a powered USB hub was not properly seated.

Z87-G45 Ethernet and USB problems. And BIOS flash problems

Hi. I kind of have a problem and hope you guys can help me.
I got this motherboard yesterday but I got a major problem with the Ethernet connection. It will simply not work, it’s totally dead. I have tried to enable everything that has to do with the Ethernet (Settings/advanced/intergrated peripherials) but it still will not work. There is no light at the back side that indicates that there is signal when I plug in the cable. I have tried the cable on my laptop so I know there is signal.
There is no problem installing windows, but I can’t install the drivers for the ethernet. I get an error message then that there is no hardware that can use this drivers.
Are there any places in the BIOS where I can enable it? How can I get this up and running?
And my USB driver is kinda messed up too. My 120MB UBS pen is found and can be used, but my 64Gb flash pen and my 500Gb USB HDD will now work with the USB. I only get the USB "ping" connection sound over and over and over and over again with the windows error, drivers not installed.
The other thing about the USB is that every time I restart the PC, I have to unplug the mice and put it into an other USB to activate it.
I have tried to flash the BIOS, but when I try (after pushing m-flash and connecting the USB and finding the file), the whole BIOS just freezes up and nothing happens. I try to wait a bit but nothing happens. I have to manually restart the machine by "force" (Turning the power to PSU off and on again. Ayone know if there is a problem with flashing the BIOS from USB? Or maybe that the USB system is messed up? Any other way I can flash the BIOS?
I have downloaded all the latest drivers and updated.
Best regards
Robert

Quote from: flobelix on 08-January-14, 00:44:08
Again do not try to use MFlash. Try the board outside case like suggested.
THis is making me frusterated now......
I have now had the motherboard on my wood table with a antistatic tablecloth and antistatic armband.
I only plugged in 1 ram, power, a monitor and mouse/keyboard(USB).
I manage to get the USB pen bootable so I could do the memtest and biost flash.
The USB ports are still unstable. I still have to move my mouse and keyboard from slot to slot when I restart the machine. It feels like if random USB conection is being turned off and on for every time I start the computer.
I connected a HDD to install Windows 7 64bit.
The computer will still not read USB storage with larger then my 120mb storage in both the BIOS and Windows (I suspect that 1GB is the limit for some rason). It only shows that USB device was not installed.
After I isntalled the USB 3.0 drivers that came with the mother board, the USB 3.0 system just stoped working. I tryed to update the drivers to the latest ones, but they still dont work. The USB 3.0 drivers do work in BIOS, but the drivers that came with the motherboard does not support windows 7 64bit. Or this motherboard.....
The ethernet conection is still FUBAR. When I try to install the drivers from the CD, the "LAN picture" is still grayed out. And when I try to force install the drivers, nothing will accept the network connectin. Trying to install the Killer Network Manager just ends up in "No supported hardware found in your system". It is like that the ethernet system is turned totally off.... But in the BIOS is marked as enable.
I have tryed to installe Realtek drivers, Intel drivers and the Atheos drivers, but non of them will install, all just say that there is no network that supports this drivers.
I am at my wits end right now. During the last 15 years I have build about 20 computers and this motherboard is taking 1st price for being the worse one ever.

Usb mouse auto disconnect time and time,Screen flash and flash when I use discrete graphic card

as title
My usb mouse auto disconnect and reconnect time and time,
no one knows when the mouse will disconnect,but every time when that mouse disconnect ,it will be reconnected in 2-5sec.
Screen flash and flash when I use discrete graphic card with the battery or use AC when connect the external display with VGA CABLE.
Mouse: Logitec G400/G1
Display:Lenovo D2081WIDE
machine:T430 2349 CTO

system info:
machine TYPE: THINKPAD T430 /2349CTO
operating system :Lenovo OEM ultimate X64 SP1
mouse type:Logitech G400 and Logitech G1
time:from 2012-10 to now
threat NO.1
USB mouse auto disconnect and reconnect time and time,no one knows when the mouse will disconnect,but every time when that mouse disconnect ,it will be reconnected in 2-5sec.
every time when the mouse disconnect I heard the sound which like USB DEVICE unplug,and when it reconnected I heard the sound which like USB DEVICE plug in.
threat NO.2
Screen flash and flash when I use discrete graphic card with the battery or use AC when connect the external display with VGA CABLE.
threat NO.3
the battery auto losing capacity!!!!!!
1% everyday about 0.2Wh
since I bought to now,
the Design capacity has losing from 57.XX Wh to 47.52Wh
and full charge capacity is 48.68.
the battery info:
cycle count is 18
Bar-Code number 1ZKFD27S1RF
SerialNumber 1896
First used date 2012-09
FRU 45N1001
Firmware 0003-0080-0100-0165

Good compact flash card reader for PC slot? card types I and II

Thanks for your time.

Interesting.
I have a Sandisk SD(etc) card reader for my Powerbook's PC slot, and it eats CPU pretty effectively as well when importing into iPhoto - but so does reading from a USB 2 card reader. The PC card reader is slower than my USB reader, but the PC reader is way more convenient!
I've noticed that OS X seems to have more difficulty with PC cards than external readers. For example, last night my PC card quit - or so I thought. When I inserted my camera's card into the reader, it wouldn't read. I saw the PC Card item pop into the menubar of the finder, so I knew the card was functional. I plugged my card + camera in with it's USB cable, and it worked (transferred to iPhoto) just fine. I formatted the card, but while iPhoto recognized it via USB (via camera and external reader), it wouldn't via PC card. I rebooted a while later, and it began to work again - go figure. I've never had this sort of issue with USB gadgets, so It's a little odd.
BTW: I usually use a Kingston 1 GB SD, or one of a few 512 MB SDs from various brands.

Copying file from a Compact Flash Card or Epson Picture Viewer issues

I am a photographer and have been experiencing issues when trying to copy or move files from my compact flash cards or my viewer HD device. Both my Sandisk reader and the epson connect to my iMac through USB (rear ports) and during the copy process, I get messages that one of the files are in use, and the rest of the copy is aborted. Since the copy process doesn't work in a numerical or filename fashion, I have to look through each file that has been copied and try to identify which files were missed. The weird thing is that if I try to copy the file that was mentioned in use, it works fine
I am copying to a USB External drive, connected to my Airport Extreme. I've encountered the same things when the HD was connected directly to the iMac.
I am getting very frustrated with this process, and am looking for insight on how to make this go away, or at the very least, is there an application that will copy/move and verify the files before exiting? I can't help but think that I may have missed files here and there, and those files could be now lost memories.
Any help would be appreciated

They'll record either while simutaniously recording to tape. I believe the HDV is in a .M2t format but I'm not sure about the DV file format. As for quality, your guess is as good as mine, I haven't had the chance to play with one yet.
Mike
M2 Digital Post Inc.
San Diego, CA.

Any card reader to transfer Compact Flash Raw photos to Ipod 5G

Hi I have a Canon 10D digital camera and have a 2Gig Compact Flash Card, I would like to know if there's any compact flash card reader for Ipod video (5th Gen Ipods) so I can use it as a Hard Drive and transfer my RAW photos to the Ipod.
Any suggestion o this or tips on this kind of card reader for Ipod.

Hi vchavez,
I've got a Nikon D70, use it with camera connector and the Belkin Hi-Speed USB 2.0 15-in-1 Media Card Reader/Writer (model no. F5U249ea) google it!
Works fine, there was a website with a list of compatible card readers, but it seem to have took the article away, the belkin above was the one on the list, thats why i got it!
Happy Shooting.
- Mike

USB, compact flash and N8

Similar Messages

Maybe you are looking for