USB CONECTION TO PC WITH HOME VISTA AND NOKIA 6210...

Help I am at my wits end with trying to get my Nokia 6210 navigator to connect to my PC via USB cable just wont communicate have checked that the cable is correct and changed the port still no luck please any suggestions

since you don't describe the problem in detail, see if something here helps:
what you want to see in iTunes is this (view from my MBP's iTunes seeing the library on my Mini)
if you then click on the house icon, it will change to this and the shared library will load. at that point, two buttons will appear in the lower right corner of the iTunes window, being settings and import
now you should be able to import any content from any shared library by selecting the content and clicking on import.
if the icon looks like this , home sharing has not been set up correctly.
in order for home sharing to work
(a) iTunes on all machines must be authorized for the same iTunes store account
(b) all machines must be on the same network
(c) all machines must have access to the internet.
if none of the above makes a difference, try turning home sharing off on all computers, then turning it back on.
these reads will be useful: one and two.
JGG

Similar Messages

Problem with home wifi and nokia n8

I have a problem with home wifi and nokia n8.
The problem is that seamlessly connects to wifi but 2 or 3 mb download is blocked and I have to reset router.
I have other devices like nokia n86 and other phones that connect well and do not give this problem.
Could anyone help me?
Thanks

i have a similar problem. it connects prefectly to wlan but after sometime the connection goes and i have to disconnect and reconnect cause ovi music or maps or opera says internet not connected. Can someone help me out here?

Installing WRT54G with both Vista and XP OS Access

First, I'm a new member of this forum.
I'm am preparing to update to a new Linksys WRT54G router. We have one computer (HP 8100N) which has Microsoft Vista Home Premium installed; but our other 3 computers all use Windows XP SP 2. The Linksys WRT54 G and Linksys Router are all plugged into the Vista machine ---with one other PC (Gateway) and 2 laptops (Toshiba and a Dell) all connecting wirelessly.
RIght now things work ok --- but it's been 5 years since I've made any major changes. However, I've experienced a rash of virus challenges lately and suspect somehow the router has been compromised; hence my desire to completely change it out. At the same time, I'm not too excited about creating problems with the Vista and XP connectivity.
Any recommendations would be appreciated. Apology to Forum if this is posted twice; it appeared not to go through the first time.
Thank you very much
Krackatoa 3

Chris:
I have experience with both, Vista and XP. I use a MBP 15" 2GB RAM and I have had great success with both. I really no not overload my system. I have software to connect to the internet and full office 2007 Suite. So, mostly internet and productivity software. No major issues with either.
Axel F.

My iPod touch 4th gen. Won't charge with a enercell charger that I've used since December. It will only charge with the apple USB cord that came with it. And even the takes it about 6 sec. To realize its charging. Help me fix this?

My iPod touch 4th gen. Won't charge with a enercell charger that I've used since December. It will only charge with the apple USB cord that came with it. And even the takes it about 6 sec. To realize its charging. Help me fix this?

Yes, I've been using it for months. And I can charge other devices with it. (my iPhone) but something weird just happened..... I kept on pluging it in the iPod and sometimes it would start to chàrge then sometimes it won't charge. Charges every time with the iPhone though.

HT4527 Is there an issue with home sharing and windows 8?

Is there an issue with home sharing and windows 8? I've tried everything and cant get mine to work.

Here is the entire error listing after it states the installation encountered errors.
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 1 fatal error(s), 2 error(s), 13 warning(s)
WARNING: DW066: OS requirements not met for {0D96CFE6-376D-44B8-808A-16F3BEB73263}
WARNING: DW066: OS requirements not met for {601CB5BC-03F9-43CC-86F0-C75E65E6AF31}
WARNING: DW066: OS requirements not met for {56AE7FCC-81B2-4A63-A171-CD95C9295EF2}
WARNING: DW066: OS requirements not met for {4717AE70-5377-45C7-A9E9-4E400485F0BF}
WARNING: DW066: OS requirements not met for {8B59B329-26C1-48A4-A5AA-923F55B17B87}
WARNING: DW066: OS requirements not met for {948B7277-3D4C-4672-B1DB-24B3C83D704E}
WARNING: DW066: OS requirements not met for {25303D67-B573-460C-A0B6-B5CF2AE05045}
WARNING: DW066: OS requirements not met for {33E08F4F-42B7-42A9-89E4-443E02738DB0}
WARNING: DW066: OS requirements not met for {D5B1535A-FDFC-4B40-B2E2-21DA83D9CB57}
WARNING: DW066: OS requirements not met for {AD60EB24-4CEE-4CA0-A6AA-526EAF41F2DB}
WARNING: DW066: OS requirements not met for {F9FAC696-2E48-497D-B820-C9A65DA630DF}
WARNING: DW066: OS requirements not met for {7DE6CDC3-CFEE-4564-813D-3F59E5D71F10}
WARNING: DW066: OS requirements not met for {C92E440F-EE79-4A28-B1E1-EC82B6F2AF33}
ERROR: DW020: Found payload conflicts and errors:
ERROR: DW020: - Adobe Flash CS5.5 depends on Adobe Flash Player 10 ActiveX to be installed.
FATAL: DW020: Conflicts were found in the selected payloads. Halting installation.

Home Sharing Between Mac and PC with Windows Vista and Wireless Ethernet

Hello.
I want to ask if anyone knows what is the problem.
I have Home Sharing Activated in my two computers and File Sharing Activated too.
My MacBook Pro has iTunes 10 and Snow Leopard all updated and my PC has Windows Vista and iTunes 10.
My MacBook Pro is connected to my network wirelessly and my PC is connected by the Ethernet Cable.
Anyone can help?

since you don't describe the problem in detail, see if something here helps:
what you want to see in iTunes is this (view from my MBP's iTunes seeing the library on my Mini)
if you then click on the house icon, it will change to this and the shared library will load. at that point, two buttons will appear in the lower right corner of the iTunes window, being settings and import
now you should be able to import any content from any shared library by selecting the content and clicking on import.
if the icon looks like this , home sharing has not been set up correctly.
in order for home sharing to work
(a) iTunes on all machines must be authorized for the same iTunes store account
(b) all machines must be on the same network
(c) all machines must have access to the internet.
if none of the above makes a difference, try turning home sharing off on all computers, then turning it back on.
these reads will be useful: one and two.
JGG

Cannot sync with Windows Vista and BB 7105t

I was using Windows XP and everything worked great. Now I have Vista and cannot sync. I open the BB Desktop Manager and it says my device is disconnected. I am plugged in to a USB port, tried two different ones and makes no difference. Thus when I go to Synchronize, the Sync or Configure PIM are not available. Also when I just plug into my computer to charge, I get a message "USB charge current is not suffigient. . . . " However, it does charge, just a little more slowly than with my XP computer. Any suggestions?

Hi and welcome to the forums!
Here is what you need to do.
Use this procedure to cleanly uninstall the DM you have loaded:
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB02206&sliceId=SAL_Pub...
Go to here and download Desptop software 4.2.2 without Media manager;
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
Cold boot the PC after de-install and :
Install with these Vista condierations:
1. Right-Click on Command Prompt in Start Menu and choose Run as Administrator
2. Navigate to C:\Program Files\Research in Motion\Blackberry\IS71 Connectors\MS Outlook Connector by typing: c:\> cd program files\research in motion\blackberry\is71 connectors\ms outlook connector
3. Then type in the command prompt, type: regsvr32 MsOutlookConnector.fil
4. If the registration is successful, the following message displays:
DllRegisterSErver in msoutlookconnector.fil succeeded.
5. Close and open Blackberry Desktop Manager to perform the synchronization process again and Outlook will be in the list...
If you receive the error message DllRegisterServer failed with error code 0x80070005 - you do not have admin rights. So, it's important that you run command prompt as admin.
http://sampath.wordpress.com/2008/03/04/installing-blackberry-desktop-software-on-vista/
Now go to your carriers blackberry software site, get the correct device OS and make sure the app loaded can find it.
Configure the DM and try to sync.
If you need more information, please ask!
If not, please resolve the post using the options by the kudos’ star
Just check the post that had your answer!
Thanks
Message Edited by Bifocals on 10-17-2008 07:41 AM
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Problems with Windows VISTA and WPA-2

Hi Guys,
I am using a Linksys router supporting draft-N; it seems that after some time of usage; Windows Vista stop being able to connect to Linksys using a WPA-2 PSK.
Everytime you search for the SSID and attempt to connect, the ''network is taking too long to connect''' and Windows always informs the user that ''limited or no connectivity'' even though the signal strength is excellent.
Is that a common problem in Windows Visa (I am using Home Edition)?

Yes thats the basica command problem with Windows Vista while connecting to the Wireless Network.... In this you can need to update your Windows Vista OS with all the Latest Patches and the Service Pack to improve more stability on your Vista Computer to get connected to the Wireless Network..

Protools 8 compatiblity with Windows Vista and which proper audio interface?

O K i have a compaq presario pc notebook with a cpu of 2.16 ghz and 160 gb(?) hard drive with 32 bit w/ Window Vista service pack 1. I've done a little research and it seems my computer may be compatible but i'm not sure Is ne one using pt 8 with windows vista with no problems? also i'm not so sure about which audio interface i should be using psi, firewire,or usb even though i have 2 usb ports im hearing its not the best choice dealing with latency and all. Is ne one using pt 8 with window vista using a usb audio interface or even firewire with any problems? thanx hope to hear from you soon!!!!

Hi again chamille2010,
Well my take would be that your rig would run Pro Tools 8 but you might struggle with the latency a bit. I ran Pro Tools LE on a PC (with significantly lower specs than yours since it was 3 years old at the time) with a Digi 002 as my firewire interface and I did have issues with latency, which is my biggest pet peeve. That was also on the XP Operating System so you might be better off with Vista SP1. I would recommend going with the Digi 003 via firewire and maxing out your RAM for best results. USB would definitely be slower and might be a cause for latency if you run into it.
That's my opinion. Digidesign has a pretty in-depth site for making sure your system will run Pro Tools. I'm sure you've already checked it out but just in case:
http://www.digidesign.com/index.cfm?langid=100&navid=54&itemid=23954

Dual-Boot Your HP TouchSmart With Windows Vista and Windows 7 in Three Easy Steps

Good article on creating a dual-boot environment. Here
HP Product Expert for the Officejet Pro X Series.
Was your question answered? Mark it as an Accepted Solution!
See a great post? Give it a Kudos!

claudecat87 wrote:
We have two computers in the office, and i am usually on our dell comp, while my bf uses the touchsmart. We just came home to find that our computer had shut itself off on its own. upon starting it, the computer would only get as far as showing the HP screen (a blue screen with a hand and objects flowing from the hand) and the four menu options { F10: setup" esc: boot menu' F11 system recovery F9 :diagnostics}. At the bottom right side of the screen it also says v 5.10. Now, when we have pressed any of the options, the computer does nothing. It would appear that perhaps the computer can not tell windows 7 to boot or something. Unfortunately we do not have the install disc either... Any thoughts?
Seems like it's stuck at the POST Screen, and nothing's responding.
I suggest removing all the USB and peripherals plugged into the PC and leave only the power and the USB keyboard receiver- nothing else.
Then try turning on the computer, if it doesn't work, I don't think there's any fix except to keep trying.
If you can get in, i suggest making a backup as soon as you can.
After that, if it still does it, then call HP at 1-866-408-5408 or chat with them at : http://welcome.hp.com/country/us/en/contact/chat_1.html
I have more HP devices than you'd expect.
1 HP TouchPad 32 GB with Android
2 HP Touchsmarts (310-1000z and IQ527)
2 HP Printers (J6480 and J5750)
1 Laptop (HP DV6253CL)
Have at least some experience in each of those devices, and i'll do my best to help you.
Kudos if I helped!

IPhone4 will not turn on. Tried reboot with home button and power button, and tried with sim out. Left on charge for an hour and nothing. Tried plugged into PC and nothing. Tried holding any and all buttons one at a time and plugging into PC and nothing.

Hi,
This is for my wife's iPhone 4
She was on a call and went to end the call and the phone just turned off.
Left it on charge for an hour or so and nothing.
I tried the old reboot (home button and power button) and nothing
I tired with the sim out.
And with it plugged into a PC, opened iTunes and it didn't recognize that the phone was plugged in.
I tried my PC and nothing.
My phone charges and connects to both PC's
Tried holding the home button then plugging into PC
Tried holding the power button then into PC
I've now been trying different combinations for about 3 hours and now I'm all out of ideas.... :(
Please please can some help before Tuesday when I will have to find someone to repair it.
Thanks,

Sounds like faulty battery. Make Genius reservation and take to Apple for quick (minutes) free battery diagnostic testing. If you have Warranty or AppleCare the problem will be covered.

Installation failed with Windows Vista and JDK1.602

Hi All,
Appreciate any help to resolve the following installation error on my Windows Vista system with JDK1.602
Pop-up Error Message:
The installer is unable to run graphical mode. Please check the value of the DISPLAY environment varibale.
Thanks,
CP

JSE8.1 (based on NetBeans 5.0) is not supported on Vista. You may want to consider using the latest NetBeans 5.5.1. (NetBeans is where all future development is planned for).
http://forum.java.sun.com/thread.jspa?threadID=5192837
From the release notes of NB551:
# Issue #85361: NetBeans 5.5 installer does not start on Windows Vista.
    Description: On systems running Windows Vista, the NetBeans 5.5 installer fails to start
and a message suggesting running with the "silent" or "console" flag appears.
    Workaround: To correct this, run the installer on JDK 6.0 build 96 or newer.
    If you encounter further difficulties, disable Compatibility Mode manually. You can do
this by right-clicking the .exe installer file and choosing Properties from the pop-up menu,
then deselecting Compatibility Mode in the Compatibility tab of the File Properties dialog.
Note that if Compatibility Mode was turned on automatically, it is necessary to disable it
for both the current user AND all users. To do so, click the "Show Settings for All Users"
button, then deselect the Compatibility Mode checkbox in the "Compatibility for All Users"
dialog.You can try the same workaround for installing jse8.1, to see if that works. But, it is an older version that is not supported on vista and hence my suggestion to consider a later version of NB.

Using mac.mail with windows VISTA and outlook

I have a new Toshiba laptop with VISTA and am having problems sending links or messages when not in mac.mail. The setup with windows mail is asking me to provide the names of the "incoming server and "outgoing server which I am unable to identify or find in mac.mail.
Can anyone help me to set this up properly in windows.
thanks

http://docs.info.apple.com/article.html?path=Dotmac/Mail/en/mac14.html

When taking a picture with home button and sleep button can you get rid of the tool and task bar??

When taking a picture with home and sleep button can you get rid of the tool and task bar?? (the search bars)

No, but you can use any picture editing tool to crop out the bars. (Many are free in the App Store.) Me personally, I use PhotoPad, which I use to crop as well as rotate the screen shot. Takes less than a minute to do both with PhotoPad.

Problems with win vista and an AX to AX extended network

Hi, I'm wondering if someone can help me out with a problem I'm having. I have a house with several floors and had patchy coverage from the Airport Express unit serving as a base station, at least down in the basement where my desktop is located. I decided to put a 2nd Airport Express unit halfway between, and choose to extend the network (using the Extend a Wireless Network option from the dropdown box, rather than WDS). For some reason, my pc won't connect properly to the 2nd AX, I get an IP address assigned, but can't ping anything. When I check the log, I see these entries for the mac address of the desktop:
Apr 25 14:18:18 5 Associated with station 00:1c:10:e4:05:7c
Apr 25 14:18:22 5 Deauthenticating with station 00:1c:10:e4:05:7c (reserved 2).
Apr 25 14:18:22 5 Disassociated with station 00:1c:10:e4:05:7c
Curiously, I have a laptop that works just fine, and I can confirm that it's connected to the extending station using the AirPort utility by seeing the wireless clients attached.
On several occasions I have managed to get the desktop to the base upstairs (in spite of the patchy reception) and reception permitting, it works ok. Very strange!
Other info:
my setup is adsl+ > thomson modem/router (from the isp, O2) > airport express base station (via ethernet cable) > airport express extending station
the desktop uses a linksys wireless g pci adapter, latest driver downloaded
the laptop is a sony vaio running vista business, the desktop vista ultimate
I am using WPA/WPA2 PERSONAL with AES encryption.
I have an integrated modem / router from my ISP that acts as a dhcp server and is connected to the AX base station via an ethernet cable.
My iphone also connects to the AX extending station
The AX base station is broadcasting 802.11n (b/g compatible mode)
Am I stretching the windows compatibility with this setup?

Sounds like it should work to me. I run the following for a network: AExt Dual Band on 2.4 & % Ghz, AExp as extender on 2.4 Ghz, AExp on 5 Ghz as extender, an HP Notebook with Vista 32 connects on 2.4 Ghz, Older IBM Notebook runs XP connects on 2.4 GHz, a new DELL Intel Quad running Vista 64 connects on 5 Ghz. It all works without problems.
I did have some connecting issues when I was using Norton 360 release 2.something. I upgraded to version 3, free with active subscription, and all issues have seemed to go away. Release 3 seems to be much more Apple aware.
Would encourage you to call Apple Support. When I called, I found them to be pretty knowledgeable and they actually speak US English as their native language.
Another tip, if you go to "Network & Sharing Center", you can see signal strength. I found this useful to tell where a particular system was connecting.
Hope this helps, Good Luck!

USB CONECTION TO PC WITH HOME VISTA AND NOKIA 6210...

Similar Messages

Maybe you are looking for