USB connection for iphone 5 hotspot is not working

I am using OS X Lion on my MacBook Pro and all of a sudden it is not recognizing my iphone 5 as a hotspot using the usb connection.  It does connect using bluetooth.  Any suggestions? 

Hello there, mcMlast.
The following Knowledge Base article offers up some great recommendations for troubleshooting issues with no sound from the speaker on your iOS device:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Verify that the volume is set to a level you would normally be able to hear.
Ensure that there is nothing plugged in to the headset jack or the dock connector.
If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
If the iPhone is paired with a Bluetooth headset or car kit:
Try turning off Bluetooth.
If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
Restart the iPhone.
If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
If the issue is not resolved, please  contact Apple Support.
Learn more about troubleshooting iPhone hardware issues.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Similar Messages

  • Mic on headphones for iPhone 4 will not work. What could possibly be wrong?

    Mic for headphones (iphone4) will not work. When I use voice control, the lines are up and down (almost like there is some type of noise) even though I am not speaking into it. Speakers are working, whether it's from music or using the phone. I've tried turning the phone on/off and it still does not work. Not sure what else to do. I just recently bought these headphones approx 4-5 months ago.

    There are three types of 3.5 mm headphone jacks - TS, TRS, and TRRS. Tip, Ring, Sleeve.
    http://en.wikipedia.org/wiki/TRS_connector
    Currently the two parts closest to the cord (2nd Ring and Sleeve) are used for the microphone. Some vendors use the sleeve for the mic, and some use the ring.
    Could be the problem.

  • IPad 2 connects via iphone hotspot, but not router

    I have a iPad 2 that refuses to see or connect to my "G" wi-fi network. Both my iphones and iPad mini connect to the same wi-fi network without any issues. But, the iPad 2 will connect to to my iPhone 5 via AT&T personal hotspot (wi-fi... is this really wi-fi?) and my mac via Bluetooth. I have reset the ipad 2 to factory settings, reset network settings and nothing is working to connect to a standard wi-fi network. Does this sound like the wi-fi antenna is not working?

    Hello Jeffrey Pimental,
    If you are not seeing your WiFi network from your iPad 2 in order to join, you may want to try the additional steps outlined in the following article:
    iOS: Connecting to Wi-Fi - Apple Support
    You may also want to double-check that the router is set up as outlined in this article:
    Recommended settings for Wi-Fi routers and access points - Apple Support
    Sincerely,
    - Brenden

  • HT201263 iTunes Recovery for iPhone 4s did not work

    What do I do if I used iTunes to restore the device, waited an hour, and it still didn't work?
    iPhone 4s
    Not jailbroken
    Paraphrased error message... "there was an error when restoring device, unable to restore"
    Apple icon still blinking intermittently
    Here's what I've done prior to subjecting to a recovery...
    1) Plugged in iPhone with iTunes open, got the recovery pop-up
    2) Attempted multiple times to avert the recovery by holding menu button and power button >10secs
    3) When the apple icon reappeared continued holding the menu button, releasing the power button, until the itune logo and usb cable showed
    4) released menu button. reapplied hard reboot, apple icon reappeared and began blinking
    5) Repeated too many times
    6) iTunes restore
    7) Typed this email
    Any help is appreciative!

    Yes, I believe the steps did Restore my device as new. I followed the steps given to me in How to Restore software in my device..still I believe the Unlocking did not work because I'm not able to use other SIM card

  • Will apple replace phone for iphone 5 camera not working if older than 12 months.

    Iphone 5 main camera not working on iphone 5. Many folks comment on apple replacing phone.  Mine is older than 12 months.  Will they still replace phone?

    No. You can get an out of warranty replacement or buy a new phone. A an out if warranty replacement will be cheaper than buying a new one.

  • USB connection from iPod to PC not working

    Whenever I connect my ipod to my PC via the USB, three beeps are heard signaling that the connection is not being made. However, when I plug the iPod into other computers using the same USB chord, it works. Also, when I plug other things into my computer using USB, they are recognized.
    What should I do so I can connect my iPod to my PC to update my iPod?

    This worked for me...
    Reinstall the COM interface for the iPod Service
    1. Quit iTunes and any running iPod Updater.
    2. Click iPodService.exe in the Windows Task Manager window.
    3. Click End Process.
    4. Click Yes.
    5. On the Start menu, click Run. Note that the Run windows may appear behind the Windows Task Manager window.
    6. Enter this text (including the quotation marks):
    "C:\Program Files\iPod\bin\iPodService.exe" /service
    7. Click OK in that window.
    8. On the Start menu, click Turn Off Computer.
    9. Click Restart.

  • Adobe Videobite for iPhone 5 does not work

    Hi,
    I have been using Adobe Videobite for the last few months and I like the app very much. I use it often for cherishing sweet memories of many families who are my friends and relatives.
    For the last couple of days, I am able to create the video but unable to save to camera roll. When I try to save, the page shows as disabled and gets hanged. I will have to remove the task to enter into the app again. I tried deleting the app and reinstalling the same. Still I am unable to create a video now.
    Please help. I wanted to save my video files like before. Thanks.

    Suggestion... cancel your contract and go to AT&T. Sounds like you might be happier there, especially if you are going to blame Verizon for something that Apple decided on (the inability to do voice and text at the same time).If you had a replacement pending at the time you requested the worry-free return, then I can see them denying it until you got the replacement phone and they got the return or you paid the full cost amount of the phone. Other than the known warts of a new phone version (both design and OS) that are well published I've had nary a problem with either the 32GB one I originally got on release date or the 64GB one that I replaced it with.  Personally for me it's going to be a keeper (and I'm a Android guy from the get go).
    Not trying to be a smart (deleted content to comply with VZW ToS), but unluckily some folks just have bad luck.  It was hard to tell in your rambling statement what the iPhone 4 signals were compared to the iPhone 5 (are you in a 3G only area or are you in an LTE area).  It almost sounds like you are on a fringe signal area with that short of talk time, which would pull the battery down as it searches for signal incessantly if you don't have one or just a marginal one.
    Message was edited by: Verizon  Moderator (M)

  • New USB cord for 3rd gen Nano not working

    Okay, I've got a 3rd generation Nano, and the original USB cord it came with was damaged, so I replaced it with an identical one. But now, when I hook it up to my computer, nothing happens---it won't even recognize that there is anything in its USB port. If somebody could give me any advice on how to handle this, I would really appreciate it.

    No it doesn't. Sometimes it make a sound that it should when connecting but that is it. Never actually charges or syncs. And it is a brand new cord.

  • HT3574 The personal hotspot is not working with me and I did not fine the icon for iphone 4 version 5.1.1

    The personal hotspot is not working with me and I did not fine the icon for iphone 4 version 5.1.1

    Check with your carrier or telephone service provider.  Not all carriers provide this service.

  • HT1689 my iphone 5s is not working shows that it needs to connect to itunes

    my iphone 5s is not working it shows that it needs to connect to itunes

    Hey Linard Michael,
    Thanks for the question. I understand you are experiencing error 4005 when attempting to restore your iPhone. The following resource provides a potential solution for this error:
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/TS3694
    Check USB connections
    Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
    If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, thentroubleshooting your security software.
    To narrow down the issue, you can also change up your hardware:
    - Use another USB cable.
    - Plug your cable into a different USB port on your computer.
    - Try a different dock connector (or no dock).
    - Add (or remove) a USB hub between your device and computer.
    - Connect your computer directly to your Internet source, with no routers, hubs, or switches.
    If you checked your connections and are still seeing the error message, check for hardware issues.
    Thanks,
    Matt M.

  • Usb hotspot is not working anymore since i installed itunes 10.6.3

    USB hotspot is not working anymore... since i installed itunes 10.6.3
    Please help me... how can i fix it.
    I have wondows 7.

    1.- Thanks for answering.
    2.- I think I did not explain myself properly: The iPod is detected by both Windows and iTunes 10.5.3 64bit version.
    The problem lies in that now after all the failures and the loss of my music (imagine I have to rip my entire CD collection again) whenever I try to sync my iTunes collection to my iPad (either on a single batch or album by album) a -50 o -69 error appears.
    UPDATE: Now whenever I connect my iPod to the computer, it is recognized by Windows, but iTunes tells me that I have to restore it.
    I cannot but commend Apple Inc. on his efforts to make a 9 months iPod unsuable. Sincerely this has brought me back to the worst of the 90s with MS.
    UPDATE 2: Please let me add that with the previous iTunes version everything was ok. But, as soon as I installed the new Itunes (10.5.3 64bit) version the misery began. Unfortunately when I try to install the previous version I'm not allowed by the program and am referred to the newest buggy one.
    Message was edited by: jesuslpgc

  • My iphone 3gs is not working properly, when switched on it says 'Update Completed' as though it has just been updated. On the next screen it says to 'Connect to iTunes'. It doesn't, however, connect to iTunes and more often than not just resets itself.

    My iPhone 3gs is not working properly and hasn't been since about September of last year. When switched on (Quite often it won't even turn on) it says 'Update Completed' as though it has just been updated. On the next screen it says to 'Connect to iTunes'. It doesn't, however, connect to iTunes and just resets itself over and over until power is gone. Occasionally after switching on and off a few times it functions normally for a few hours and some times even a couple of days but eventually always turns itself off and goes back to the 'Update Completed' screen. Does anyone know what might be causing this and/or a way of fixing it?

    Morning JordenR,
    Thanks for using Apple Support Communities.
    You can resolve many restore issues using the troubleshooting steps documented here.
    For more information on this, take a look at this article:
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/ts1275
    Best of luck,
    Mario

  • My iphone 4 is not working and I cant reset it from the computer either because it wont connect to it I need help!!!

    My iphone 4 is not working and I cant reset it from the computer either because it wont connect to it I need help!!!
    1. I tried connecting it to itunes for a system reset and it didnt work.
    2. The phone wont even turn on!!!

    If the phone wont turn on it sounds like it needs to be charged.  Plug it into a charger and wait about 15 minutes and try turning it on while still charging. Have you tried holding in your home button with the on/off button held in?  Hold them both together until the apple logo comes up and then release them.  The screen will blink off an on while it is resetting. I still think this is a battery issue. Good luck~

  • Hi,  I would like to ask you a question. a month ago I bought a battery case for iPhone 5 and it worked properly until I installed iOS 7. From that day iphone is operating normally, but when the battery is empty, unfortunately I can not charge additionall

    Hi,
    I would like to ask you a question.
    a month ago I bought a battery case for iPhone 5 and it worked properly until I installed iOS 7. From that day my iphone is operating normally, BUT when the battery is empty, unfortunately I can not charge additionally my iphone with the "extra battery case".
    Does that mean that you did not even create a new software that supports additional battery case or it is something else?
    I need your help!!,
    Thank you in advance.
    Sincerely,
    VK

    The Mophie Air is a good battery case, but doesn't offer the protection she's looking for. I suggest sticking to the Lifeproof, the iPhone has a very good battery (2-3 days moderate usage for me).
    To your 2nd to last paragraph, that is false. Verizon is allowing exisiting customers to keep Unlimited Data - but will lose it once they use a subsidized upgrade. So if you buy a 4S (or LTE device for example) outright, you will keep unlimited data. Mobile hotspot may use up a bit of data, but it is a separate add-on/feature. The new Family Share plans may change that, so it's one giant center of data all devices use.

  • Hi, I have iphone 4s and since yesterday my personal hotspot will not work. It's always worked fine in the past and I have a plan with three uk which includes tethering. I've tried everything I can think of including resetting network settings, resetting

    Hi, I have iphone 4s and since yesterday my personal hotspot will not work. It's always worked fine in the past and I have a plan with three uk which includes tethering. I've tried everything I can think of including resetting network settings, resetting the phone as a new phone but nothing works. When connected to the pc it shows on the iphone screen '1 connection' but the pc says 'no internet connection' I've spoken to three who say it must be a phone fault. Any help appreciated. :-)

    If you have restored as new that pretty well covers software issues
    Looks like a trip to an Apple Store and a likely Out of Warranty exchange unit  £159 over the counter
    May e consider an upgrade with the money ?

Maybe you are looking for

  • Third party sales order close

    Hi Experts, How to close the open quantity in third party sales order if Purchase order is already generated from that sales order. i am unable to update the reason of rejection field in Sales order. It is giving message "Delete purchase order 830000

  • Creating new document types

    Hi, i've opened a call at SAP Support for following request and the support has relegate me to the forum/ solution managers: For some, especially for one customer, is it very important to get new types of documents. For example: The credit memo. The

  • Old version itunes 10.4.1.10 rather than new?

    Hi, does anyone know how to safely install an older version of itunes 10.4.1.10 rather than 10.5.2.11 which I have now?

  • PO printing

    Hi, I have got 2 users namely X and Y. I have maintained some text under text id in item level of PO. Now when user X outputs the PO in pdf doc he can see the item level description but when user Y outputs PO in word docs, he is not able to view the

  • Home Sharing After iTunes Update to 11.1.5.5 - HELP!

    I am unable to enable Home Sharing after updating to iTunes 11.1.5.5. I've updated my Apple TV (3rd Gen) along with iTunes 11.1.5.5, restarted all my devices (iPad Air with iOS 7.0.6, iPhone 5 with iOS 7.0.6, Apple TV 3rd Gen and Windows 7 64bit PC),