USB Connection Not Recognized

A few days ago I noticed that when I plugged in to do any type of file transfer that the laptop wasn't recognizing the phone as a drive and in fact wasn't even giving me the notification any longer. The battery would still charge though. I checked a few different cables to make sure that wasn't the issue. Now that I have taken advantage of the update this morning the laptop will recognize the phone but only as an "E" drive that holds the file for the update. The "G" drive still isn't being recognized. Any advice or direction would be greatly appreciated.

I updated my Fascinates this afternoon and am seeing same issue.
Seems to be related to some new 'Media sync' option.
I did some playing around and the following seemed to let me 'mount'
the phones as before. ( But I dont like it. )
Hoping for some direction from Verizon tech on
a) what is media sync ? 
b) how do I turn off permanently If I dont need or want to use it?
Unplug phone from usb cable.
Then on Phone...   Menu...Settings..USB settings
Change to ' Ask on connection'.
then press home button.
Plug in USB cable.
When prompted...Press 'Mass storage'.
Now wait...wait..wait.  Took about 30 to 45 seconds.
Annunciator bar should have usb symbol.  Drag it open.
Press usb connected....Press   Mount..
My laptop now recognized the SD card on E drive.
Copy files as usual.
When done...Open Anunciator bar and 'Turn Off' USB storage.
Sometimes when connecting I would see 'Media sync connecting'..press to Cancel. So I'd cancel.
Research needed on this.  Perhaps some new features ???

Similar Messages

  • "USB Device Not Recognized" Bubble/ Ipod won't connect to Windows

    Whenever i connect my ipod to my computer the ipod goes to "do not disconnect" and a bubble pops up on my computer saying "USB DEvice Not Recognized" i have switched it to all of my usb ports and unplugged all usbs except for my mouse at the same time. this happens 95% of the time. my ipod does charge while connected and it has only connected to itunes once in the past 2 weeks. im not sure if it is itunes because it started around the time i updated to itunes 7. since it is a windows bubble though i think it is a windows or ipod problem and not itunes. i have a dell that isnt great but works fine.
    thanks for any help.
    ... Go TTU!

    Make that two idiots. My roommate got a Sansa and I decided to try out the cable. Nothing happened. Now suddenly my nano isn't recognized by my computer. I'm glad I read your post, now I can stop looking high and low for a solution. Until this happened it worked good as new.

  • "USB Device Not Recognized" Message when connecting iPod Nano

    I get the following windows pop up when connecting my son's iPod Nano
    *"USB Device Not Recognized"*
    *One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message.*
    I have successfully connected this device to this computer before so I don't know what has changed.
    Message was edited by: ipodnannouser

    This did not work for me. I have a laptop that was running Windows XP, and it had no problems recognizing the iPod. I was having problems with XP, and rather then reinstall XP, I did a clean install of Vista. I did a settings transfer, so the new install of iTunes came already configured--I mention this since I don't know if it was a factor.
    When I plugged in the iPod, I got the USB Device Not Recognized. The usbstor.inf file did not fix the problem. However, the solution at http://www.winvistabeta.com/groups/275128/ipod-usb-device-not-recognized/message .aspx did fix the problem. Do this:
    Reset the iPod:
    1. Unplug the iPod.
    2. Turn the hold switch to HOLD and then back to off.
    3. Hold the Center and Menu buttons for 6 seconds until you get the Apple logo when you release them.
    4. Plug in the iPod. It should now be recognized.
    This worked fine for me the first time. Thanks! Jack

  • "USB Device Not Recognized" error when I connect iPod to my PC

    I have a brand new 5th gen (I think) iPod.
    I have been able to connect it successfully to my home laptop, download music to it and play it so I know the iPod works per se and the cable is ok too.
    Now at work (where tons of my music is) when I connect it to my PC here and I get a "USB Device Not Recognized" error pops up from my taskbar. When I click on the message it pops up a "USB Device Not Recognized" window which displays a list of USB ports, and shows "Unknown Device" for the one where the iPod is connected.
    I think its probably USB1.something as opposed to USB2.0 but from what I understand that shouldn't matter.
    Can anyone suggest anything ?
    I've tried the 5R's as far as I can, and I read through this thread:
    http://discussions.apple.com/thread.jspa?threadID=500559&tstart=15
    but there didn't seem to be anything conclusive.
    Thanks for any help,
    Jill

    First make sure the latest iTUnes is installed on this work PC, IF your allowed to install things on it, the latest iTunes version is 6.0.4.2 and can be downloaded from the apple site (Hit iPod+iTunes tab at the very top of this web page)
    Another thing is what version of windows is the work PC? Is it windows XP Windows 2000 Or windows Me 98? iTunes will only run on XP and 2000

  • IPhone 3G plugged into PC(Windows 7) 'USB is Not Recognized' and unable to restore; stuck on 'Connect to iTunes'

    iPhone 3G plugged into PC(Windows 7) 'USB is Not Recognized' and unable to restore; stuck on 'Connect to iTunes'
    I was in the process of putting another firmware for my iPhone(an .ipsw via. itunes) and the house had a power cut. The computer was in the middle of restoring the iPhone but never finished. The apple logo came on and then came onto the 'connect to itunes' screen. My sim card was in but there is no option to slide for emergency. When I Plug it into my computer, a message pops up saying that the 'USB Device Not Recognized', I've tried to plugging my iPhone into my laptop and other Computers but the same message occurs (all windows 7). Other articles say that the error is with the iPhone, I need help!! Can anybody offer some advice on what to do?
    oh yeah, bit tight so not willing to spend any money;-)

    Apple support:
    Network Printer Troubleshooting
    Reset Printing System

  • "USB device not recognized." "The connection between your device and the desktop could not be established. Please check your setup and try again." Tungsten E2, Outlook 2007

    Hi,
    I am running XP SP 2, on a Dell Vostro 1000, Palm OS Garnet v5.4.7 on a Tungsten E2. I have worked though issues relating to synchronization, Outlook 2007, Docs to Go, etc., in the past.  Thank you board members! 
    Once I worked thru all the initial problems, my Tungsten E2 was sync' ing beautifully to my laptop until a few days ago.  There have been no changes (I know of) to the configuration, but now I receive  "The connection between your device and the desktop could not be established.  Please check your setup and try again."  On the laptop I sometimes get  "USB device not recognized."  I am unclear why I get the PC message sometimes and not others.   
    I have tried the following: (not necc exactly in this order)
    Double checked Hot Sync Mgr settings: Local USB (ver. 6.0.1)
    Reset the Palm (multiple times)
    Rebooted the laptop  (multiple times before and after the Palm resets)
    Went to Support Libraries including http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=57,E=0000000001060189973,K=9550,Sxi=3,Case=Obj(3695...)
    and http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=PalmSupportKB,ts=Palm_External2001,Case=obj(1409) 
    Followed the steps in "Start Here" found at  http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=26057 
    Moved Backup directory as per a post on this forum
    Looked for a deleted a file called "Graffiti_ShortCuts_____________" per a post on this forum
    Followed the steps in HotSync troubleshooter guide you can run through located on
    http://kb.palm.com
    Went into Device Manager - found it shows no yellow ! 's
    Followed Device Mgr Troubleshooter - went all the way thru with no solution 
    Tried all four USB ports - the PC's bell-like tone does not sound when I disconnect or reconnect the Plam's cradle like it does when I conn/disconnect other USB devices -I think that is a clue.    ...? 
    Cleaned the Palm's contacts (and cradle's contacts with a old, dry toothbrush)
    Read all the posts under "USB device not recognized." 
    OK, I'm at a loss, can anyone help me?  Many thanks in advance! 
    ~Bob
    Post relates to: Tungsten E2

    Hello!
    Using a cradle with the Tungsten E2?  Tried bypassing the cradle and just use the hotsync cable?  Tried a different computer yet?  Somehow, the PC is having problems getting a signal from the device.  I assume you have the laptop charger plugged into the laptop during this?  Not going through a docking station or port-replicator.
    One crazy thing you can try is unplug the charger from your laptop, remove the battery from the laptop and leave it out for like 10mins and put it back in and reboot the laptop.  This should not cause side effects but still contact your OEM to make sure that nothing else is needed after leaving the battery out for extended period of time.  Keep me posted.
    Post relates to: Treo 650 (Unlocked GSM)

  • USB Device Not Recognized when Iphone connected to PC

    Hello,
    Every time I connect my Iphone 4S to my PC I get the error "USB Device Not Recognized". I did not have this problem before. I tried uninstalling Itunes and all its components and reninstalling it, restaring my computer, restarting Iphone and I even reset all the setting on my Iphone. I connected my wife's Iphone 4 using the same cable and PC and connected and started syncing with Itunes right away. If anyone has any pointers on how to fix this problem, any help will be much appreciated.

    try reseting the phone
    RESET DEVICE
    Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost).

  • I getting error when connecting my new iPod in my car. Getting error that usb is not recognized.

    I getting error when connecting my new iPod in my car. Getting error that usb is not recognized.

    Not all car systems are compatible with the iPod touch.  Does the documentation/website for the car system say it is compatible with an iPod with iOS 5?

  • When I connect my iPhone 4s to the computer, it says "USB device not recognized" , how do I fix this?

    When I connect my iPhone 4s to the computer, it says "USB device not recognized" , how do I fix this?

    Look to the right in the MORE LIKE THIS box.

  • USB device not recognized after connecting the iphone to PC

    Hi all,i have an iphone 3Gs 16 GB.I have some problems with it.Yesterday when I decidet to plug my iphone to PC and update the iOS,windows gives a message:USB device not recognized. ***?! I tried to change the USB cable and no fix,i tried reinstalling iTunes-same thing,I tried on another computer-the same.So in my country there's no apple store just Orange store what sels this mobiles and i took it there, so i'm waiting for the response.What could be with it?! There was no water or physical damage. ?! Thanks a lot

    someone? please

  • Re: "USB device not recognized​." "The connection between your device and the desktop could not be establishe​d. Please check your setup and try again." Tungsten E2

    Have had my Tungsten E2 for 3 years...I always use cable to Hotsync, and the last few weeks it has worked only intermittently. Either the device is not recognized, or it starts the HotSync and then freezes.  I have checked out various online suggestions but then discovered that the only thing that seems to  work is to exit Hot Sync Manager, then restart it again each time - then Hot Sync seems to work fine - a temporary solution! I don't have Bluetooth capabilities.  I can't figure out if I need a new cable, a new OS (have Vista), a new laptop (only 2 years old) or a new Palm!  Any suggestions? Thanks!
    Post relates to: Tungsten E2

    Hello!
    The next time that happens, USB device not recognized error, unplug the cable from the PDA and pc, then soft reset the device, then plug the PDA back in and see wat happens. 
    Post relates to: Treo 650 (Unlocked GSM)

  • My ipad is not connecting the computer when i plug in, USB device not recognized pops up.  I uninstalled and reinstalled itunes without any improvement.

    I cannot get my ipad to sync with the computer, the message USB device not recognized keeps popping up. I've uninstalled and reinstalled itunes without an improvement.

    Do you have firewall or anti-virus software running?  If you do, it helps to turn it off.  Otherwise, click on this link and see if it helps:  http://www.apple.com/support/ipad/assistant/itunes/

  • USB Device Not Recognized

    Operating system:  Windows Vista
    Error:  USB Device not recognized
    While actively on the computer, we suddenly got a message stating that the USB Device was not recognized.  The only thing plugged in to the USB port was a mouse.  Tried all the ports, same message.  Tried another mouse, same thing.  Tried a thumb drive, and low and behold, 2 of the 3 USB ports worked.  Tried a URL from MS which is supposed to help with this exact problem and possibly fix it:  http://windows.microsoft.com/en-us/windows-vista/Tips-for-solving-problems-with-USB-devices 
    This didn't work.
    Contacted HP support and they wanted me to restore back to a restore point as well as updating my BIOS.  After searching the issue more extensively using Google, I found that several people said to do this:
    Shut down the computer
    Remove the power plug
    Remove the battery
    Put the battery back in
    Power up the computer (without the power plug)
    This forces a hard reset.
    Almost as if by magic, the problem disappeared.  A much simpler and less technical solution to the problem than what HP recommended!!!!

    Hi @yani1015,
    Welcome to the HP Support Forums! I see when you were installing your HP Printer you got a message on your Computer saying 'USB Device not Recognized.' To better assist you can you leave me with the following information:
    1. What is the Exact model of HP Printer you are using?
    2. What is your current Operating system, Windows or Mac and which version?
    3. Were you able to install the printer?
    4. Did you plug in the USB prior to the software prompting you to?
    Click here to download and run the Print and Scan Doctor > www.hp.com/go/tools- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
    Please let me know what the PSDR finds, I will watch for your reply.
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • TS1369 Hello! I have an Ipod Shuffle 2nd Generation and it is not recognized by my Windows 8 based laptop. An error message of 'USB device not recognized' is shown. I have the latest ITunes version installed, and tested the dock in other pc's.

    Hello!
    I have a problem connecting my Ipod Shuffle 2nd generation to my Windows 8 based laptop. The computer doesn't recognize the Ipod and issues an error message saying 'USB device not recognized'. I tried uninstaling ITunes(latest version) and all other Apple software and reinstaling it back again, checked my USB hubs in the 'Device Manager' section of the Control Panel, you name it.
    I could really use some help solving this.
    I've turned to the troubleshooting section in Apple Support but it has nothing concerning situations in wich the device isn't even shown in the 'My Computer' folder.
    Help a brother out, will you???

    Found a solution in another forum http://en.kioskea.net/forum/affich-63733-ipod-not-detected-on-computer (a few posts down).
    It was for an IPOD so you can see those details in the link.
    Found how to reset a shuffle and inserted it into these instructions - did not have to follow his last steps.
    - Turn off computer.
    - Plug Shuffle into usb.
    - Then you must reset your shuffle
    To reset iPod shuffle:
    Disconnect iPod shuffle from the computer (if connected).
    Move the switch on the iPod shuffle to the OFF position. Note that when iPod shuffle is off, the green stripe by the switch is not visible
    Disconnect iPod shuffle from the computer (if connected).
    Move the switch on the iPod shuffle to the OFF position. Note that when iPod shuffle is off, the green stripe by the switch is not visible.
    - Start computer and it should install the usb driver for the ipod automatically.
    - Your i pod will say do not unplug so don't. then open itunes and it will be there.
    I did not have to do these thing below – did not get error message and shuffle was displayed in Itunes. / LMc
    Just remember to not only eject ipod from itunes but stop usb.
    Go to the program icons near the clock and right click the usb icon and "safely remove hardware" will appear and click it.
    Stop it and select "apple ipod".

  • "USB device not recognized" when ipod plugged in???

    (ipod mini 4gb)
    When I plug my ipod into my laptop I get the message: "USB device not recognized." It says the device has malfunctioned!!! If I click on this error message it says my ipod is an unknown device and no drivers are installed for it???
    It was working fine until a few days ago. If i reset it I can charge it up but that's all, it still does not appear in itunes or on my computer.
    I've tried eveything on the help website but nothing works! Can anyone help?!
    patriot 3050   Windows XP  

    ok my question is do you have a mac or windows based laptop
    here is why and what happened to my ipod mini
    my ipod mini was connected to my macintosh charging while i was using my imac and it came up with a system update 10.4.3 i installed it and finished installing it and afterwards my apple wouldn't recongnize my ipod mini or even display it one the screen i found out by myself that when the apple update got to the end of the update it installed new hard drive drivers but also installed the drivers on the ipod mini which locked out the mini's internal hard drive and my mini then stop responding it would play music and charge but wouldn't connect to the computer
    so what i did to fix it was this
    i went into utilites in mac os x tiger or any version of os x has this and selected disk utility you will notice that the ipod will appesr in disk utility but not on the desktop this is due to a recent system update driver that isn't compatible with the internal drive on the ipod mini so in disk utility just select format the drive in a mac os partition standard works the best it will then format the ipod and the ipod will apear in the desktop again but not as a ipod let me explain when you format the ipod using the disk utility it formats and even erases the firmware of of the hard drive on the mini so when you are done formating the ipod run the ipod updater to reinstall the ipod's operating system and presto your ipod will now work again
    warning: i don't know how to fix this on a ipod in windows so if this is a windows based laptop you need to find someone witha macintosh to do this with sorry

Maybe you are looking for