USB connection unstable

My USB connections are unstable.  They randomly cut out, regardless of which port or what device is plugged in.  My mouse and keyboard will stop working out of the blue.  My USB microphone will stop working in the middle of a video chat or recording a narration.  Sometimes I have to reboot to solve this.  At other times I can just put the laptop to sleep and wake it back up and I have USB functionality again.  The problem seems to be getting more frequent.  Is this a software or hardware problem?  What is the fix?
Laptop: HP G71 Notebook PC
Running Windows 7 Ultimate 64-bit Service Pack 1

Hi Ross,
Please let me know the results of reinstalling the drivers. If it didn't work, take a look at this document, which provides the steps to use Recovery Manager to restore your software and drivers. 
If I have been helpful or if you’d like to say thanks you can click the white star under my name to give me Kudos.  I really appreciate it!
Please let me know if this helps.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

  • USB connection unstable in Windows 8

    When I connect my Z2 to my WIndows 8 laptop through the USB cable the connection is unstable. The laptop recognises the phone and shows it as external harddrive in Windows explorer, but when I open the drive it does not respond. Then after a while it opens a new Windows explorer window with the phone's drive, but again I can not use it.
    I've checked that I have the latest driver. And on my desktop PC with Windows 7 I have no problem.
    Hope someone can tell me how to solve this.
    Solved!
    Go to Solution.

    I checked the drivers, all USB devices were working ok. I tried disabling the signing check as described in this post:
    http://www.howtogeek.com/167723/how-to-disable-driver-signature-verification-on-64-bit-windows-8.1-s...
    But I also realised I should see if installing the PC companion helped (usually I don't care about this vendor-provided stuff as long as I can access the storage).
    Doing both solved the problem, so it's difficult to say what did it.

  • AiO Remote Ink Levels etc not accessible with USB connection

    My printer prints and scans just fine...except that it ran out of ink after about 15 pages. I'm trying to view the ink levels, but everything in the HP AiO Remote says it's not supported with the USB connection. There's no other way to connect my printer. I need to view the ink levels and be able to put in new ink, but I can't because the software isn't working right. Help?

    Hi @HnnhSmth95, 
    I see by your post that you are unable to view the ink levels by a USB connection. I can help you with this, but I will need some more information.
    What is the full name and product number of your printer? How Do I Find My Model Number or Product Number?
    What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • How can I use Active Print on my Ipad and print to my usb connected HP officejet 6110 all in one

    I was previously able to use Active Print on my Ipod to print to my usb connected HP officejet 6110 all in one.  Now, however, with my Ipad version 2 I can no longer get this to work.  Can anyone help?  Thanks.

    Hi,
    HP do not provide any USB connection solution for iOS.
    As Active Print is a 3rd party application which provide this functionality, i believe you may find a better help within Active Print support as they more familier with their application requirement and functionality:
    http://www.activeprint.net/support/
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • TS2756 How can i create a new usb connection (service)  on my iMac for sharing internet from my iPhone5 ( i seem have to deleted it )

    How can i create a new usb connection (service)  on my iMac for sharing internet from my iPhone5 ( i seem have to deleted it )
    i know its not a problem whit my carrier o data plan or sharing preferences on the ipone because when i use it un my laptop it works perfectly through
    the usb and even works on the Imac through wifi and bluethood tethering but NOT through usb!!.
    the problem is that trying to make it work i deleted the "profile" usb iphone on the network prefereces panel. Now i only have 3 options: ethernet / wifi / bluetooth
    but not the usb iPhone i used to have.
    And when i try to add a new one i dont get a USB option.
    can some one help me please??
    this is how it looks (after the bluetooth PAN i used to have USB iPhone option)

    The question would be more appropriate in the Mac forums as it is not really related to the iPhone.

  • Computer not responding to iphone usb connection

    I get no response from plugging in my iphone 3g. I've tried restarting the computer and the phone many times, still nothing? All software up to date, computer, iphone and itunes.

    Double check your USB connection. That's been the problem in most cases for me.

  • Nokia c5-03 usb connecting error

    hi i have nokia c5-03.there is no memory card present in my phone.but when i connect my phone to pc through cable the erroe comes in there (memory card not present usb connection may not work as expected) anyone know what's the reason is this... plz help!

    Answered your question in the other forum mate.

  • Cannot delete photos from camera folder in PC by USB connection

    After few times update of iOS, I cannot delete the photos in iPhone 5 from my laptop. I can do it before but not now.
    I usually connection my iPhone 5 through USB cable to my laptop.
    Just go to My Computer and open iPhone photo album, then select, copy, cut or delete. This is my way to manage my photos.
    I have not using iTunes for long time since the iCloud launch.
    Please help me on this issue.
    Many thanks.

    Not only was this design change an extremely bad idea, after updating my phone, it moved all the pics from my camera roll into a photos album that cannot be edited.  I can no longer delete any of these pics from my phone or from the USB connection, except from the camera roll which was added back. Now what??
    How am I supposed to get rid of all the pics I don't want? This idiotic change created a big mess for me that there appears to be no way out of...
    GIVE US BACK CONTROL OF OUT PHONES, AND STOP SCREWING WITH OUR ABILITY TO DELETE PICS!!!
    I AM EXTREMELY UNHAPPY WITH APPLE NOW!

  • IPhone Issues with USB Connection and Bluetooth in GM cars

    I recently purchased a 2009 Chevy Cobalt SS/TC and it has a USB connection for an iPod. Prior to the 2.1 updated the USB connection worked flawless as well did my handsfree/bluetooth. I had the Apple Genius Bar check my iPhone for any issues due to a corrupt update but everything turned up fine. When i connect to my car I receive an error message (iPod Did Not Authenticate. Check iPod Version). Also my bluetooth will sync but when you answer the phone using hands free you get no audio from the iPhone or speakers in the car. I used a friends iPod and everything worked fine but when I connect with a new iPod it displays the same error. I have contacted GM but they said talk to Apple.
    If anyone can help please let me know.
    Thanks

    Hey J,
    Well you got me thinking about your question, and I guess I didn't get it the first time. Again, I own the same car - 09 Chevy Cobalt SS/TC, Black. A lot of fun! I plugged my iPhone into the radio USB connection and get the same error. The GM radio does not support the iPhone. It will not authenticate. The GM radios' firmware is looking for an iPod, not an iPhone. That is expected. As far as the iPhone and it's Bluetooth, again the iPhone's Bluetooth hands free works fine, except I cannot answer the iPhone during an incoming call without first unlocking the iPhone then pressing the mute button on the steering wheel. For what it's worth the iPhone will charge through the USB connection. I'm a little confused on what you are trying to connect. Bottom line, an iPod should always work, an iPhone, not at all. Lastly, I have purchased the GM Personal Audio Link (PAL) and hope to use it with my iPod so I can put the iPod in the glove compartment. Although I have heard a lot of negative comments and issues with it for being slow and sluggish. If so, I'll be sending it back and I'll stay with the USB connection. I'll let you know how that works.

  • Is it possible to use my ipad 4 as a second monitor through a USB connection.

    Is it possible to use my ipad 4 as a second monitor through a USB connection.

    perhaps, but my information was current. I had the same question and was looking for and answer and found it. So I responded in order to help others who found this question and were looking for an answer. This community is made more helpful and kept current by adding new answers with current information.
    imobl... air display was a valid response for 2011 predating the question. Also using Monitor2go was valid in 2012. There were USB mirroring and as a 2nd display for an iPad options at the time the original question was asked.

  • I need to connect my iPad to a projector and USB ports. What do I need to do this and where can I get the suitable fittings? I really need to have more than one USB connection port. Help

    I need to connect my iPad to a projector and have USB ports. What do I need to do this and where can I get the suitable fittings? I really need to have more than one USB connection port. Help

    You can connect via a cable or wireless using an Apple TV.
    http://ipad.about.com/od/iPad_Guide/a/How-To-Connect-Your-Ipad-To-Your-Tv.htm
    Connect an iPad to a Television or Projector
    http://www.everymac.com/systems/apple/ipad/ipad-faq/how-to-connect-ipad-to-tv-te levision-projector.html
    Connecting iPad iPhone or iPod to TV or Projector
    http://www.disabled-world.com/assistivedevices/computer/ipad-tv.php
    iPad Accessories: Connections for a TV or Projector
    http://www.dummies.com/how-to/content/ipad-accessories-connections-for-a-tv-or-p rojector.html
    You may be interested in AirPlay on the Apple TV:
    http://www.apple.com/airplay/
    Alternately, there are Apple Digital AV Adapters for hardwired connections:
    http://support.apple.com/kb/ht4108
    If your location does’t have wifi to use with the Apple TV, use a portable router.
    Portable routers http://compnetworking.about.com/od/routers/tp/travel_routers.htm
     Cheers, Tom

  • Acura USB Connection Problems After iOS 8.2 Update

    I have a 2014 Acura MDX and prior to the iOS 8.2 update, I could play music either via Bluetooth or the USB connection through the iPod "source" (though the USV connection had far superior sound).  After the update, the USB connection doesn't work anymore. Same cables used and the iPhone picks up a charge so it is not a bad connection. Anyone else having the same issue?

    this happens also to me. Opel Astra / GM version in Europe.
    8.2 totally killed audio via USB cable. Connecting results in "no supported audio files found"

  • After sleep, retina MacBook Pro (Mid 2014) does not recognize usb connected mouse movement

    After sleep, retina MacBook Pro (Mid 2014, on 10.9.4) does not recognize usb connected mouse movement. I have tried a generic usb mouse and my Razer Deathadder usb mouse. Both mice work before sleep; but after sleep, the computer no longer recognizes mouse movement while still recognizing the mouse buttons when pressed. Any idea why this is occurring?

    Hello, chocotac0.  
    Thank you for visiting Apple Support Communities.
    Here are some troubleshooting steps that I would recommend when experiencing this issue.
    OS X Mavericks: Reset your computer’s PRAM
    http://support.apple.com/kb/ph14222
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964
    OS X Mavericks: If a USB device isn’t working
    http://support.apple.com/kb/PH13876
    Cheers,
    Jason H.

  • I have an Pioneer HD TV, but it does not have the HDMI port and it only has a USB connection?  Can I still hook up my Apple TV to my TV?

    I just got an Apple TV (the newest black one) and I have an older Pioneer HD TV.  I noticed that I don't have a HDMI port on the TV and only a USB connection.  My question is, can I still hook up the AppleTV to my TV with other connection wires and will it still allow me to use my ITunes music, photos and Netflix with the same picture and sound quality?
    Thank you!

    Welcome to the Apple Community.
    The Apple TV will not work over USB, the only type of connection supported is HDMI.

  • Can I use my iPhone or iPad as a web cam for my PC via the USB connection?

    I've seen quite a few Apps for doing this wireless, most of which a very poorly executed OR don't work at all. I'm just wondering why it hasn't been more popular to do this via the USB connectivity.

    Thanks Lawrence but the point is, I already own the $600 dollar device (given as a gift) and secondly because to purchase a web cam that has the same quality as the iPhone is actually just a bit more than $10 and I'm not really desirous to spend anymore money based on my budget.  Any ideas of whether or not it can actually be done via USB OR do you have experience with an actual App that works via wireless to a PC?  Thanks again...

Maybe you are looking for

  • Three dots at the end of my Node userObject

    I'm having a little trouble with my JTree. In my application I wrote some commands to change the String display of some Tree Nodes that are part of my tree. What I use is the method setUserObject( Object ex ) and everything goes fine, the change is m

  • Changes in production order/Process order

    Hi Experts, Very much hopeful that I will get solutuion of below: How or where to see changes done in production / process order. e.g Suppose I have created one production order. Then release it in CO02. Then I changed order quantity from 100 to 200

  • Safari screen glitch

    When using safari 6.0 full screen mode in ML, if i press "open link in a new window" for any links, it makes screen glitch. Any solution?

  • [OT] Rant at the forum

    Every dang time i come to this forum, what do i see? Welcome to our online community. You can browse directly in any of the forums below, or login or register to start posting your own messages. Notice the new look? We've updated to a fresh new visua

  • More info on plugin API "slapi_be_get_instance_info"

    Hi How can I read the info returned by the plugin API "void * slapi_be_get_instance_info(Slapi_Backend *be)". thanks, sanjay