Usb content not visible on Z2 tablet

Hi there, everyone! When connecting a USB-stick (Sandisk Cruzer Blade 64Gb in this case) I cannot find any content. ES Fileexplorer does not show any content (MP4 films in this case)
Does anyone know about this problem? I am trying to look at films I put on the USB.
Solved!
Go to Solution.

What format is this 64gb stick? it should be in either exFAT or forced FAT32
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled.   Richard P. Feynman

Similar Messages

  • USB disk contents not visible

    Hi -
    I connected a 2TB external HDD (AC powered 3.5") via the USB port to the Airport extreme (5th gen.).. . The external HDD is OSX extended/journaled and has 800GB of stuff on it, but these files are not visible through the airport extreme network.  I can read and write NEW files to this HDD, but cannot access any extisting/previous files...
    Have not tried a powered USB hub yet - as my HDD is self-powered and SHOULD not require any additional power.
    Any thoughts?  Thanks!

    I have not tried a powered USB hub yet - as my HDD is self-powered and SHOULD not require any additional power.
    I have 3 different hard drives, all with own separate power supplies, so they should work.
    But none of them will work with AirPort Extreme unless I use a powered USB hub.
    I cannnot say that this will help you, but it is worth a try if you have exhausted all other possibilities.

  • Email contents not visible using Yahoo mail, Windows 7 pro, FF3.6; email content fine in IE

    New laptop with Windows 7 pro; loaded FF....worked fine for a couple weeks....then, contents in email no longer visible-----just blank box where text would normally appear. Only known changes were auto updates to adobe and auto updates to Windows. Zonealarm security in place since beginning, no changes since installation. When using IE, email is visible.
    Just uninstalled Firefox and reinstalled. Same result....emails still not visible.
    Appreciate any suggestions.....I hate using IE.

    When you send mail the field you mention is used to populate the "ReplyTo: fild in the mail header. Otherwise it has no purpose and setting it to nothing will also work.
    Yahoo are obviously checking that field as you send mail. that is points to a valid address, and I have a sneaking suspicion that is might be required to point to your yahoo mail account.
    Historically the"Nigerian" type scam emails used a replyto address completely different from the one used to send the mail. So even if the sending account was closed down they still got the replies. The mail quite commonly originated in Yahoo and replied to Hotmail accounts. So I guess they have a check to try and discourage that legitimate, but undesirable from their perspective, use.

  • Web Page Content not Visible

    Hi,
    I'm having a problem, I think is isolated to Internet
    Explorer 6.0. A few people using this version of the browser have
    reported that the contents of my main page are not visible unless
    you scroll down quite a ways. Any ideas what could be causing this?
    MyAfricanDiaspora.com

    On Wed, 19 Sep 2007 14:23:31 +0000 (UTC), "dreamnew"
    <[email protected]> wrote:
    >Hi,
    >
    > I'm having a problem, I think is isolated to Internet
    Explorer 6.0. A few
    >people using this version of the browser have reported
    that the contents of my
    >main page are not visible unless you scroll down quite a
    ways. Any ideas what
    >could be causing this?
    >
    http://www.myafricandiaspora.com
    138 apparent validation errors - but that will reduce once
    you start
    fixing the problems.
    http://validator.w3.org/check?uri=http%3A%2F%2Fwww.myafricandiaspora.com%2F&charset=%28det ect+automatically%29&doctype=Inline&ss=1&group=0&verbose=1#line-378
    ~Malcolm N....
    ~

  • Portal Content not visible

    Hi All,
    We are working on EP 7.0 SP9 using Internet Explorer 6.0 SP2 browser, but still the portal content directory in the portal is not visible. It shows javascript error in the status bar. The page gets loaded but with javascript errors.I am logging into portal with super admin role, but the same problem is coming. Even in Mozilla browser, the same error is displayed. I have even added the portal URL in trusted site.
    Useful answer will be awarded suitably.
    Regards,
    Udit

    Hi Leandro,
    The javascript error that is coming is:
    Line:165
    Char:4
    Error: Object required
    Code:0
    URL: http://<domain name>:<port no>/irj/portal/prtroot/com.sap.portal.appdesigner.framework.loading?loadingStr=Loading...&scroll=no&contentUrl=%2firj%2fservlet%2fprt%2fportal%2fprtroot%2fpcd!3aportal_content!2fadministrator!2fsuper_admin!2fsuper_admin_role!2fcom.sap.portal.content_administration!2fcom.sap.portal.content_admin_ws!2fcom.sap.portal.portal_content!2fcom.sap.portal.contentCatalogTreeContent
    Plz guide me.

  • Portal content not visible after installation nw2004s

    Hello
    Portal Content folders not visible after logon to EP after installation
    using the url  http://172.22.218.120:50400/irj
    logon is using Administrator id.
    top level navigation is displayed. but no folder hierarchy in PCD.
    Please help
    regards
    John

    Hello John,
    Used the host name instead of the ip address in the url http://<host name>:50400/irj/portal.
    Maintain the host name in the host file of the OS.
    ip address  host name.
    Regards
    Deb
    [Reward Points for helpful answers]

  • Content not visible while using DVBClassLoader

    Hi, we have a problem with DVBClassLoader. We need to download several *.class files from WWW server in our application. The file is downloaded, but the problem is that the content is not visible for main Xlet class. Can someone help us please???
    try {
                   classPath[0] = new java.net.URL("file:" + sBuffer.toString());
                   System.out.println("URL is " + classPath[0]);
                   classPath[1] = new java.net.URL("http://XXX.YYY.146.233/");
              } catch (MalformedURLException e) {
              cl = DVBClassLoader.newInstance(classPath);
              try {
                   cl.findClass("SecondClass");
                   System.out.println("SecondClass read");
              } catch (ClassNotFoundException e) {
              secondClass = new SecondClass(context, scene, mainContainer, telo);
              secondClass.display(path1);

    I haven't tried it, but it looks to me like you need to provide the parent ClassLoader in order to handle delegation to the DVBClassLoader.
    intstead of this: DVBClassLoader.newInstance(classPath);
    use: DVBClassLoader.newInstance(classPath, getClass().getClassLoader());

  • ESS Content not visible in Content Administration

    I've installed SAP Netweaver 2004s Java + Portal 7.00 SP7.
    I also deployed ESS, MSS and PCUI_GP. The content of ESS is not visible when I look in de content administration. I'd expected it under "Portal Content --> Content provided by SAP --> End user content".
    Noting strange hapened during deployment. I'm using user Administrator (UME = Java database).
    Any sugestions?

    Hi wilbert
    Import the Portal content Buisness Package for ESS/MSS
    if u r working with ERP2004 download it from following link.
    ESS:-
    https://smpdl.sap-ag.de/~swdc/002007974700000167412004D/BPERP4ESS0_0-10003146.zip?_ACTION=DL_DIRECT
    MSS:-
    https://smpdl.sap-ag.de/~swdc/002007974700000246072005D/BP_ERP4MSS0_2-10002991.zip?_ACTION=DL_DIRECT
    unzip the zip file import it into portal.
    regards,
    kaushal

  • HFS+ formated USB Disk not visible under Windows 7

    Hello.
    I recently purchased an APE and hooked a 4TB HFS+ drive via USB on it. Unfortunately it's not visible under Windows7. Though if I use a Fat32 formatted drive i'm able to access it. I even have macdrive installed. The drive is working properly if connected to the PC or MAC manually.
    Please help

    Hello exalderan. Welcome to the Apple Discussions!
    FWIW. I currently have an external USB drive (NewerTech miniStack) connected to my 802.11n AirPort Extreme Base Station (AEBSn). I can access it from Windows 7 (Ultimate) from either a dedicated Windows PC or from a Parallels VM running Windows 7 without any issues. The 2 TB drive is formatted in HFS+.
    What type of errors are you getting?

  • Mobil email content not visible

    Since a July 5th security update to Firefox an email that I receive daily from a vendor, who uses his mobil phone to send a daily price quote, is not visible. The header to the email is visible but not the content. However, if I start a "reply" to the email - then I can see the content. I have cleared cache and history and done a reset of Firefox without success. The email is viewable on Explorer and Chrome but not Firefox. It is the only email of hundreds that cannot be seen after July 5th.

    My speculation would be that something changed in the underlying HTML of the messages themselves, and/or how they are rendered by your email site, that causes Firefox to view the July 3+ messages differently.

  • USB key not visible on desktop

    Hi,
    I have an USB key that is mounted from OS as /Volume/NO NAME but it's not visible on the desktop and in the Finder. It worked fine until some time ago then stopped showing ion the desktop.
    Finder->Preferences->General has all the 4 box for showing devices selected.
    I can work on the key using the terminal, ie. I can copy files form the key to the internal HDD but I have to use the umount command or the Disk Utility to umount the filesystem.
    The key is formatted as FAT32.
    Other external USB storage or USB keys are correctly shown.
    I tried also to "repair" the key under Disk Utility, but the problem remained.
    Any suggestion on what else to check?
    Many thanks
    ciao
    giorgio
    iMac with OS X 10.7.5

    Mouse pad and keyboard on the laptop.
    I tried to use USB with a virtual machine (Win 7) and them works fine.
    Only under mac.
    The image is in italian language...
    I think is not a power problem.
    I Also checked the option under Finder preferences...

  • Page oversized entire contents not visible on hvga

    Site displayed in full and not scrolling or zooming out on hvga screen making other parts not visible
    Note adult site

    Problem can be found within the SEND method of the CL_ALERT_MANAGER class. In this method it executes the following code:
        CALL METHOD alert_cat_man->get_short_text
          EXPORTING
            ip_cat       = l_cat
            ii_container = li_container
            ip_langu     = l_langu
          IMPORTING
            ep_text      = ep_textstring.
    li_container has an attribute mt_elements which contains the values of the containers of the alert category, the recipients and the logical system.
    ep_textstring is an ordinary string.
    I have an alert category which has 1 container, a char160 field. I want to put a char140 field in it:
    <i>XIDCLNT050 : Testtype on 20070419 / 103154 interval of 30 min, less than 1 received!</i>
    This char140 field is put in the &ERROR_TEXT& container.
    The ep_textstring is the finalized string (as defined in transaction ALRTCATDEF).
    and in my case should look like:
    <i>Alert IDOC_MONI: &ERROR_TEXT&</i>
    If we put in the actual value of &ERROR_TEXT& we get:
    <i>Alert IDOC_MONI: XIDCLNT050 : Testtype on 20070419 / 103154 interval of 30 min, less than 1 received!</i>.
    However the output of ep_textstring looks like:
    <i>Alert IDOC_MONI: XIDCLNT050 : TESTTYPE ON 20070419 / 103154 INTERVAL OF 30 MIN, LESS THAN 1 RECEI</i>
    ep_textstring is 97 characters long and the correct string should be 101 characters long so both should fit easily in a short text.
    In my opinion it's a bug in SAP so im trying to get an answer from them.
    Kind regards,
    Wouter Luijten
    edit: got an answer. all texts are 80 characters long. So if your texts are longer than that, they will be truncated.
    Message was edited by:
            Wouter Luijten

  • USB Devices not visible in Lion

    Ever since I upgraded to Lion, none of my USB devices are visible in the 'DEVICES' tab in Finder.  I've tried a jump drive and my external hard drive.
    I'm using a 2011 MacBook Pro.  Any ideas?

    Ok, finally made it to the real deal. Here's how I solved the problem.
    1. I uninstalled every NTFS driver that I had on my Mac.
    2. I restarted.
    3. I deleted the file on this route:  /System/Library/filesystems/ufsd.fs
    (I did a backup of the file, just in case)
    4. I reinstalled a NTFS driver, (I used Paragon NTFS for Mac v.9.0)
    5. Restart again.
    6. You're done. You should be able to mount your external NTFS drive.
    Big thanks to Nic Pel and Humbertog for their help
    Here's the thread if you want to read it https://discussions.apple.com/thread/3191198?start=0&tstart=0
    Good luck!

  • AEBSn + USB disk, not visible in Windows

    Have been using AEBSn as access point for last 6 months. Now added a LaCie MacMini drive via the USB port on AEBSn but am unable to access it via the LAN. I know this is a common problem and have checked the settings described in some of the responses to no avail.
    The disk is formatted as HFS and can be accessed using MacDrive when directly attached to PC. The disk name is currently "Lemon" (so no funny characters).
    AEBSn has latest firmware (7.2.1), the disk is visible under "disks" on the Airport Utility, file sharing is enabled with base station password, guest access is read & write and disks are advertised globally using Bonjour.
    I have tried to access from three different PCs. The latest Bonjour (1.0.4) is loaded and is enabled in firewall (AVG in 2 and Windows in other). From Windows Explorer I can see the AEBS (properties shows it as a CIFS server) but it has no folders. The Airport Disk Agent is running in the system tray but does not detect any disks.
    Please help, my central back strategy is in ruins!

    Hi, I just got my usb disk working!
    I got Airport Extreme (the latest one), all the firmware updates (7.2.1) one pc with WINXP. A 500Gb USB disk from Packard Bell. I want to connect the drive to the Airport and serve files over the wireless.
    my trouble was that while I could see the disk in airport utility, I could not actually connect: wrong password, user etc.
    As the disk is visible in Airport Utility and the Extreme station is visible in the disk management utility in the status bar, I concluded that there must be a problem outside of the Airport Extreme. Indeed, this I found to be in my network settings, which I easily fixed by installing Microsoft Client for Networks. Practically I did this by Start>Network settings right click Properties. then selected the wireless network right click properties once more. Under the General tab I checked for the presence of Microsoft Client for Networks, it wasn't there so on the same screen I click Install.. select Clients and fianlly Microsoft Client for Networks. Bingo.
    I hope this helps, I spent a whole day looking around in this forum and no one has suggested this. So I do and wish you good luck! (now to see if I can get the music onto my Airport Express!!!)

  • Placeholder content not visible in Preview

    I am a RoboHelp10 newbie with two projects on the go, one inherited and one new.  Placeholder content (breadcrumbs and Topic TOCs) is visible in Preview mode (Ctrl+W) in the inherited project, but not in the new project.  They don't show in Firefox/IE Preview either.  All other content/formatting seems to preview just fine.  MS_HTML_Help is the designated primary layout for both projects.  Based on a post in this forum, I tried updating DHTML effects, but it didn't help.  Any suggestions?
    I am assuming if they don't appear in Preview, they won't appear in the generated CHM.  Correct?
    RESOLUTION:  I finally fixed the problem with brut force by starting a new project and importing the HTML pages, etc.  Even then, it took a few tries before it worked.  Still don't know the underlying cause. 
    Message was edited by: Steve@SSA on 16Nov2013

    Vamsi mailed me offline and I have suggested looking at Using RH7 on my site where this problem is covered.
    See www.grainge.org for RoboHelp and Authoring tips
    Follow me @petergrainge

Maybe you are looking for