USB Controller Driver (3.0) for Windows Server 2008 Standard Edition 32-bit
Hi,
I have recently built a HP DL320e Gen8 v2 server with Windows Server 2008 Standard Edition 32-bit & it's missing the USB Controller Driver which HP don't have. I have searched endlessly online without success. HP suggest I try Windows but I couldn't
find it in the Download Center either.
Can somebody please provide me with the USB Controller Driver for Windows Server 2008 Standard Edition 32-bit?
Regards
Naz
Hi,
Thanks for your posting.
For this issue, i think you need to search in the HP official website or contact the HP support.
Regards.
Vivian Wang
Similar Messages
-
Maximum Nodes supported for NLB and Cluster in Windows Server 2008 Standard Edition ?
Hi.
I am looking for information How many nodes supported for NLB and Cluster in Windows Server 2008 Standard Edition ?
If you can provide for all the versions that would be great.
-Thanks
- Ajay ChananaHi,
You can configure a Windows server 2008 NLB cluster with up to 32 nodes. However,
scaling beyond 8 nodes will cause a slight performance hit because the network traffic is broadcasted to every node and only one NLB node accepts the connection.
For more detailed information, please refer to the link below:
FAQ Week for NLB: Tuesday
Best regards,
Susie -
I have been using Windows Server 2008 Standard Edition for my business purpose and there are at-least 30 Users who logged in into the server Via Remotely from different location. I want to upgrade my server with latest one with some extra cores and RAM for
better and smooth operations for all users. So, i have a doubt whether my CAL Licenses will works with Windows Server 2012 or i need to purchase the new one for the same?
Moreover, if i don't upgrade my Windows to any 2012 edition and stay on 2008 Standard Edition how much maximum RAM can be installed at a time? is there any limitations? if Yes, please let me know how do i upgrade my Windows 2008 Standard Edition to any other
business edition to avoid such limitations of RAM?
Waiting for your favorable and quick response.Hi again,
th eupgrade optiuon from Standard 2008 to Enterprise 2008 was only available for customers with open value contract with activ esoftware assurance then they can purchase the step up license from Standard to Enterprise.
the only way to have the Enterprise 2008 Edition is to make th edowngrad efrom 2012 Standard to 2008 Enterprise. it means that if you purchase the 2012 R2 Standard Edition, you may downgarde to Enterprise 2008/2008 R2. th ebest way to make the downgrade
to 2008 R2 Enterprise is to purchase the current Version 2012 R2 Standard in volume licensing than you can download diretly from VLSC the Enterprise Edition.
with your downgrade you can still using the 2008 CALs.
thanks
diramoh -
What GB of RAM can be used with Windows Server 2008 Standard Edition?
I have been using Windows Server 2008 Standard Edition for my business purpose. how much maximum RAM can be installed at a time? is there any limitations? if Yes, please let me know how do i upgrade my Windows 2008 Standard Edition to any other business
edition to avoid such limitations of RAM?There is always a limit. The details here: http://msdn.microsoft.com/en-us/library/windows/desktop/aa366778%28v=vs.85%29.aspx#physical_memory_limits_windows_server_2008
In the article you will find the limitations for other Windows OSs too.
This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Get Active Directory User Last Logon
Create an Active Directory test domain similar to the production one
Management of test accounts in an Active Directory production domain - Part I
Management of test accounts in an Active Directory production domain - Part II
Management of test accounts in an Active Directory production domain - Part III
Reset Active Directory user password -
SP3 cannot be installed on SQL Server 2008 standard edition 64 bit
I am getting error during the running of setup of SP3 for SQL Server 2008 Standard edition on windows 2008 R2 enterprise ed.
Description:
SQL Server 2008 Setup has encountered an error.
Problem signature:
Problem Event Name: SQL100Exception
Problem Signature 01: SQL2008@RTM@KB2546951
Problem Signature 02: 0xFE9E43A7
Problem Signature 03: 0xFE9E43A7
Problem Signature 04: 0xDC80C325
Problem Signature 05: 0xDC80C325
Problem Signature 06: InitializeUIDataAction
Problem Signature 07: Unknown
Problem Signature 08: Unknown
Problem Signature 09: Unknown
Problem Signature 10: Unknown
OS Version: 6.1.7601.2.1.0.274.10
Locale ID: 1033
Additional information about the problem:
LCID: 1033
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txtHi,
I found the log file but I am not able to find any upload file button. It is very big file how can I upload it here?
Overall summary:
Final result: The patch installer has failed to update the shared features. To determine the reason for failure, review the log files.
Exit code (Decimal): -74274373
Exit facility code: 914
Exit error code: 43451
Exit message: The system cannot open the device or file specified.
Start time: 2014-04-10 08:03:59
End time: 2014-04-10 08:05:15
Requested action: Patch
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140410_080359\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.0.5500.0%26EvtType%3d0xFE9E43A7%400xDC80C325
Machine Properties:
Machine name: AD-ITD-SW-SQLDB
Machine processor count: 16
OS version: Windows Server 2008
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Sql Server 2008 MSSQLSERVER MSSQL10.MSSQLSERVER Database Engine Services
1033 Standard Edition 10.0.1600.22 No
Sql Server 2008 MSSQLSERVER MSSQL10.MSSQLSERVER SQL Server Replication
1033 Standard Edition 10.0.1600.22 No
Sql Server 2008 MSSQLSERVER MSSQL10.MSSQLSERVER Full-Text Search
1033 Standard Edition 10.0.1600.22 No
Sql Server 2008 MSSQLSERVER MSAS10.MSSQLSERVER Analysis Services
1033 Standard Edition 10.0.1600.22 No
Sql Server 2008 MSSQLSERVER MSRS10.MSSQLSERVER Reporting Services
1033 Standard Edition 10.0.1600.22 No
Sql Server 2008 SWMSSQLSERVER MSSQL10.SWMSSQLSERVER Database Engine Services
1033 10.0.1600.22
No
Sql Server 2008 SWMSSQLSERVER MSSQL10.SWMSSQLSERVER SQL Server Replication
1033 10.0.1600.22
No
Sql Server 2008
Management Tools - Basic 1033 Standard Edition
10.0.1600.22 No
Sql Server 2008
Management Tools - Complete 1033 Standard Edition 10.0.1600.22
No
Sql Server 2008
Client Tools Connectivity 1033 Standard Edition
10.0.1600.22 No
Sql Server 2008
Client Tools Backwards Compatibility 1033 Standard Edition 10.0.1600.22 No
Sql Server 2008
Client Tools SDK 1033
Standard Edition 10.0.1600.22 No
Sql Server 2008
Integration Services 1033 Standard Edition
10.0.1600.22 No
Package properties:
Description: SQL Server Database Services 2008
SQLProductFamilyCode: {628F8F38-600E-493D-9946-F4178F20A8A9}
ProductName: SQL2008
Type: RTM
Version: 10
SPLevel: 3
KBArticle: KB2546951
KBArticleHyperlink:
PatchType: SP
AssociatedHotfixBuild: 0
Platform: x64
PatchLevel: 10.3.5500.0
ProductVersion: 10.0.1600.22
GDRReservedRange: 10.0.1000.0:10.0.1099.0;10.0.3000.0:10.0.3099.0;10.0.4010.0:10.0.4250.0;10.0.5501.0:10.0.5750.0
PackageName: SQLServer2008-KB2546951-x64.exe
Installation location: d:\c8811b7ec810308deb\x64\setup\
User Input Settings:
ACTION: Patch
ALLINSTANCES: False
CLUSTERPASSIVE: False
CONFIGURATIONFILE:
HELP: False
INDICATEPROGRESS: False
INSTANCENAME: <empty>
QUIET: False
QUIETSIMPLE: False
X86: False
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: The rule result report file is not available.
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: System.ComponentModel.Win32Exception
Message:
The system cannot open the device or file specified.
Data:
DisableWatson = true
Stack:
at Microsoft.SqlServer.Chainer.Infrastructure.MsiNativeMethodHelpers.GetDBProperty(ServiceContainer context, String pathToMsi, String propertyName)
at Microsoft.SqlServer.Configuration.MsiExtension.SetPatchInstallStateAction.GetMsiRtmVersion(PackageInstallProperty targetPackage)
at Microsoft.SqlServer.Configuration.MsiExtension.SetPatchInstallStateAction.IsApplicablePatch(PatchProperty currentPatch, PackageInstallProperty targetPackage)
at Microsoft.SqlServer.Configuration.MsiExtension.SetPatchInstallStateAction.ExecuteAction(String actionId)
at Microsoft.SqlServer.Configuration.MsiExtension.ProductInstallProperty.GetInstalledPackages(String instanceName, List`1& installedInstancePackages, List`1& installedSharedPackages, String& returnedErrorMessage)
at Microsoft.SqlServer.Configuration.MsiExtension.ProductInstallProperty.CollectProductData()
at Microsoft.SqlServer.Configuration.FeatureTreeConfigurationBase.LoadFeatureTreeDefinitionAllInstances()
at Microsoft.SqlServer.Configuration.PatchFeatureTree.InitializePatchFeatureTree(ServiceContainer context)
at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream) -
The environment - Windows Server 2008 Standard/Windows 7 32 bit Client machine.
Share - It is not a DFS share.
Antivirus - McAfee
The issue - 1 user is unable to connect to a particular shared drive hosted from within the Windows Server 2008 Standard file server. This drive is one of the multiple drives which are supposed to be connected to the user machine during logon using
the logon script. All the other drives mentioned in the logon script gets mapped fine but one particular drive does not. The user uses a laptop and we have checked his connections while in LAN, Wireless, VPN. Everything seems to be working
fine apart from this one shared drive. Rest of the users within that office gets the drive fine but just not this one user. Since we are not domain admins so we do not have a visibility of the group policies linked to this particular drive and
hence RSOP as well does not help. We have not seen the user getting logged into the machine using a TEMP profile as well for us to ascertain that the issue may be with a TEMP profile logon.
Please note that the drive does get connected at times and at times the connection just drops off! As an interim measure the local IT has created a batch file and given it to the user which maps the drive for the user.
Any help in resolving this long impending issue would be much appreciated!
SumanHi Suman,
You could keep the session always active to workaround this issue. Please open Control Panel -> Administrative tools -> Local Security Policy -> Local Policy -> Security Options and set the value of the policy Microsoft Network Server:Amount
of idle time required before suspending a session to 99999 and see how it works.
This security setting determines the amount of continuous idle time that must pass in a Server Message Block (SMB) session before the session is suspended due to inactivity. Administrators can use this policy to control when a computer suspends an inactive
SMB session. If client activity resumes, the session is automatically reestablished. For this policy setting, a value of 0 means to disconnect an idle session as quickly as is reasonably possible. The maximum value is 99999, which is 208 days; in effect, this
value disables the policy.
For more detailed information, please refer to the thread below:
Loss of mapped drive, networked drive disconnects
http://social.technet.microsoft.com/Forums/windows/en-US/c6da707b-5224-40f5-8d0e-e8985453221d/loss-of-mapped-drive-networked-drive-disconnects
You could also refer to the article below to troubleshoot the issue:
Mapped Drive Connection to Network Share May Be Lost
http://support.microsoft.com/kb/297684
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Hi there;
I have a windows server 2008 SP2 (32bits) in which I have an instance of SQL Server
2008 and another of 2012.
My Windows server 2008 installed the following updates; (see below).
(KB2898858),(KB2909921),(KB890830),(KB2898869),(KB2911502),(KB2901126),
(KB2916036),(KB2862973),(KB2901113)
After the machine was re-started, I was not abble to connect
to the instance of SQL Server 2012. I am able
to connect to the instance of SQL Server 2008.
The error message I get when I atemp to connect can be found
at the end of the list of updates below.
Do I need to uninstall an update? if so, which one and how do I do that?
Thanks Gabriel I. Ruiz
Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 x86 (KB2898858)
Installation date: 2/12/2014 11:42 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2898858
Cumulative Security Update for Internet Explorer 9 for Windows Server 2008 (KB2909921)
Installation date: 2/12/2014 11:42 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2909921
Windows Malicious Software Removal Tool - February 2014 (KB890830)
Installation date: 2/12/2014 11:41 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/890830
Security Update for Microsoft .NET Framework 4.5.1 on Windows 7, Windows Vista and Windows Server 2008 x86 (KB2898869)
Installation date: 2/12/2014 11:40 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2898869
Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 x86 (KB2911502)
Installation date: 2/12/2014 11:36 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2911502
Security Update for Microsoft .NET Framework 4.5.1 on Windows 7, Windows Vista, and Windows Server 2008 x86 (KB2901126)
Installation date: 2/12/2014 11:36 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2901126
Security Update for Windows Server 2008 (KB2916036)
Installation date: 2/12/2014 11:34 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2916036
Security Update for Windows Server 2008 (KB2862973)
Installation date: 2/12/2014 11:34 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2862973
Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 x86 (KB2901113)
Installation date: 2/12/2014 11:34 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2901113
===================================
Cannot connect to HAVANA\HAVANA_2012_1ST.
===================================
The client was unable to establish a connection because of an error during connection initialization process before login. Possible causes include the following: the client tried to connect to an unsupported version of SQL Server; the server was too busy
to accept new connections; or there was a resource limitation (insufficient memory or maximum allowed connections) on the server. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=233&LinkId=20476
Server Name: HAVANA\HAVANA_2012_1ST
Error Number: 233
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParserStateObject.SNIWritePacket(SNIHandle handle, SNIPacket packet, UInt32& sniError, Boolean canAccumulate, Boolean callerHasConnectionLock)
at System.Data.SqlClient.TdsParserStateObject.WriteSni(Boolean canAccumulate)
at System.Data.SqlClient.TdsParserStateObject.WritePacket(Byte flushMode, Boolean canAccumulate)
at System.Data.SqlClient.TdsParser.SendPreLoginHandshake(Byte[] instanceName, Boolean encrypt)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
No process is on the other end of the pipeHi,
Check if SQL Server service is running fine. I doubt you may have changed the user account password used for SQL Server service. After restarting the machine, you also need to update the user account of SQL Server service in Configuration
Manager. Re-type the user account name and password under Log on tab and see how it helps.
Thanks.
Tracy Cai
TechNet Community Support -
Windows server 2003 standard edition 32 BIT
I NEED THE ISO FILE FOR WINDOWS SERVER 2003 STANDARD EDTION
THE ISSUE IS I DONT REMEMBER THE PASSWORD TO LOGIN THE SERVER SO I AM LEFT WITH NOTHING BUT TO RE INSTALL THE WINDOWS SERVER
PLEASE TELL ME IF THERE IS A WAY TO RESET THE PASSWORD( I DONT HAVE ANY RECOVERY DISC ) OR DO I NEED TO INSTALL A FRESH COPY OF WINDOWS , IF YES THEN PLEASE PROVIDE ME A LINK TO DOWNLOAD THE RELEVANT FILE.
IS IT POSSIBLE TO INSTALL 64 BIT AND USE THE KEY OF 32 BIT ? PLEASE ADVICE
THANKSHi:
Not the usual thing in forums to use all caps, but no offense taken.
For password reset, try this:
http://www.petri.com/forgot_administrator_password.htm
Note that Domain Admin Passwords are handled differently, see the link at the end of the page.
Larry Struckmeyer[MVP] If your question is answered please mark the response as the answer so that others can benefit. -
Ethernet controller driver not installing after Windows Server 2008 installation on Cisco UCS blade
I am using MDT 2010 to deploy Windows Server 2008 to a Cisco UCS B200 blade. The OS and hotfixes install with no problem. The system reboots and attempts to connect to the deployment share to continue with the task sequence and I receive an error stating
"A connection to the deployment share could not be made. The following networking device did not have a driver installed. PCI\VEN_1137&DEV_0043&SUBSYS_00481137&REV_A2"
The driver in question is the driver for the Ethernet controller for the UCS blade. More specifically, it is the network driver for the Palo card in the UCS Chassis. When I Ignore or Abort the install, I am able to manually install the driver and restart the
task sequence. The build then completes successfully with no further issue. I just cannot seem to automate the driver install. Has anyone dealt with this type of issue?Vik and stealthfield - thank you for your responses.
I was preparing a script to manually move the driver into the c:\windows\inf location when I had to stop to create a new task sequence for a different build. It was while building this task sequence that I found the soulution to the problem.
In the Post Install -> Inject Drivers step of the Task Sequence, I noticed that it was executing a command of type "Inject Drivers" with a selection profile of "All Drivers" and "Install only matching drivers
from the selection profile" selected.
I changed this to run a command of type "Run Command Line" and specified that it execute "%Scriptroot%\ZTIdrivers.wsf". I noticed that this was selected in one of my other builds that was working properly, so I thought I'd
give it a try. - IT WORKED.
So to sum up, the solution was to change the type of command being executed in the "Post Install -> Inject Drivers" step of the task sequence. After this change, the machine came up and continued the task sequence with no further issues.
Thanks again for the responses - They were helpful and I do appreciate it. -
Correct version for windows server 2008 Standard 64 bit
Hi could you help me to download the right version to install adobe reader in a machine running Windows server 2008 with 64 bit, since this machine doesn't have internet access I would need the offline installer but I don't know where to get it.
ThanksIs this just for people sat at the server as if it were a workstation? Use the Windows 7 version.
-
Office Jet pro 8610 for windows server 2008 R2
I have the new Office Jet pro 8610 prither but dosn't have the driver for "Windows Server 2008 R2 Enterprise" 64 Bit.
What to do now. Can you please provide ?
Thanks in advance.
This question was solved.
View Solution.Hi,
The same driver as provided for any Windows OS as Windows 7 or 8 should be used, the installation however should be launch via the command line and not as a standard installation.
Follow these steps to install the printer software on a server:
http://support.hp.com/us-en/product/HP-Officejet-Pro-8610-e-All-in-One-Printer/5367603/model/5367606...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
In one of our windows machine( OS : Windows Server 2008 Standard (Service Pack 2)-32bit), we are facing TIME_WAIT in all the TCP/IP ports and it is not getting closed.
On analyzing the issue, we found solution for this from the below link,
https://support.microsoft.com/en-us/kb/2553549
In this page, we are able to get the hotfix for Windows Server2008 R2 SP1 but i can't able to get for Windows Server 2008 Standard SP2(32bit). If we try to apply the hotfix vailable for SP1, it is showing "The update does not apply to your System".
Kindly provide us the solution for solving TIME_WAIT issue in the machine.
OS Details : Microsoft Windows Server 2008 Standard
Version : 6.0.6002 SP2 Build 6002
System Type : 32 bit(x86-based PC)
Awaiting for the response.
Thank you,
Pushpalatha.ADownload correct version from Microsoft Update Catalog. Run it with elevated rights.
M. -
Issue Installing SP2 for Windows Server 2008 SP1
Hello, I have a very annoying issue, and I hope someone can help a bro out.
Server: Windows Server 2008 SP1 64-bit
Issue: SP2 wont install on Windows Server 2008 SP1
This is what I am seeing when I check the event viewer:
1. (Information) Windows Servicing is setting package KB948465(Service Pack) state to Staging(Staging)
2. (Error) Windows Servicing failed to complete the process of changing update 948465-382_neutral_GDR from package KB948465(Service Pack) into Staging(Staging) state
I have no idea why this is coming up, nor why the server cant fix the issue, but now I am forced to deal with it. So if anyone has any helpful tips it would be greatly appreciated.
What I have done so far:
I have downloaded the standalone SP2 file from microsoft, and tried to install, still failed. Just sent me to the prereq page, which is pretty useless considering the fact I already have SP1 installed, and nothing new has changed physically or digitally
in the system.
Also, although not a huge issue, I also have a security update that is failing, basically with the same issue as the SP. Below is its Error event log.
(Error) Windows Servicing failed to complete the process of changing update 974318-11_neutral_LDR from package KB974318(Security Update) into Staging(Staging) state
Im hoping that upon discovering the SP issue, I can resolve the security update issue, as the errors have the same issue(failed to complete staging state).Thank you for your time.
~I will provide any further info if needed.Thank you for pointing me in the right direction Milos. Yes I ALWAYS google my issues before going on forums for help. And to no avail. However, below is the relevant info(sorry I did not post this the first time;first time dealing with an issue like this,
so I wasnt for shore what relevant data pertained to this issue):
I also did not copy and paste the entire log in here(obviously) because its huge, however I will post link to full file if requested/needed, but hopefully I grabbed the entire log for my SP2 update failure issue. All I can grab from this log is that the
CBS failed. However, I have no clue where to go after that..
WindowsUpdate.log:
2015-02-22 19:24:15:093
940 d10
AU AU initiated download, updateId = {D0ABB478-FFD1-448A-9058-939C0B427AD4}.107, callId = {2AFDE80E-EFBF-40A6-861B-32400AC5493B}
2015-02-22 19:24:15:093
940 d10
AU Setting AU scheduled install time to 2015-02-23 08:00:00
2015-02-22 19:24:15:106
940 1538
DnldMgr *************
2015-02-22 19:24:15:107
940 1538
DnldMgr ** START ** DnldMgr: Downloading updates [CallerId = AutomaticUpdates]
2015-02-22 19:24:15:107
940 1538
DnldMgr *********
2015-02-22 19:24:15:107
940 1538
DnldMgr * Call ID = {2AFDE80E-EFBF-40A6-861B-32400AC5493B}
2015-02-22 19:24:15:107
940 1538
DnldMgr * Priority = 1, Interactive = 0, Owner is system = 1, Explicit proxy = 0, Proxy session id = -1, ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}
2015-02-22 19:24:15:107
940 1538
DnldMgr * Updates to download = 1
2015-02-22 19:24:15:107
940 1538
Agent * Title = Windows Server 2008 Service Pack 2 for x64-based Systems (KB948465)
2015-02-22 19:24:15:108
940 1538
Agent * UpdateId = {D0ABB478-FFD1-448A-9058-939C0B427AD4}.107
2015-02-22 19:24:15:108
940 1538
Agent * Bundles 2 updates:
2015-02-22 19:24:15:108
940 1538
Agent * {A34F6A47-5AB9-44CB-AB3F-9FC64F7B903C}.107
2015-02-22 19:24:15:108
940 1538
Agent * {77DBCA97-29DC-42BA-9DB2-03C7B4D262D4}.107
2015-02-22 19:24:15:108
940 1538
DnldMgr *********** DnldMgr: Regulation Refresh [Svc: {9482F4B4-E343-43B6-B170-9A65BC822C77}] ***********
2015-02-22 19:24:15:108
940 1538
DnldMgr Contacting regulation server for 2 updates.
2015-02-22 19:24:15:109
940 1538
Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\wuredir.cab:
2015-02-22 19:24:15:119
940 1538
Misc Microsoft signed: Yes
2015-02-22 19:24:15:123
940 1538
Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\wuredir.cab:
2015-02-22 19:24:15:131
940 1538
Misc Microsoft signed: Yes
2015-02-22 19:24:15:134
940 1538
DnldMgr Regulation server path: https://www.update.microsoft.com/v6/UpdateRegulationService/UpdateRegulation.asmx.
2015-02-22 19:24:15:135
940 d10
AU # Pending download calls = 1
2015-02-22 19:24:15:135
940 d10
AU <<## SUBMITTED ## AU: Download updates
2015-02-22 19:24:15:644
940 1538
DnldMgr * Regulation call complete. 0x00000000
2015-02-22 19:24:15:661
940 1538
DnldMgr *********** DnldMgr: New download job [UpdateId = {A34F6A47-5AB9-44CB-AB3F-9FC64F7B903C}.107] ***********
2015-02-22 19:24:15:732
940 1538
DnldMgr * All files for update were already downloaded and are valid.
2015-02-22 19:24:15:732
940 1538
DnldMgr *********** DnldMgr: New download job [UpdateId = {77DBCA97-29DC-42BA-9DB2-03C7B4D262D4}.107] ***********
2015-02-22 19:24:15:733
940 1538
DnldMgr * Queueing update for download handler request generation.
2015-02-22 19:24:15:733
940 1538
DnldMgr Generating download request for update {77DBCA97-29DC-42BA-9DB2-03C7B4D262D4}.107
2015-02-22 19:24:16:095
940 1538
Handler Generating request for CBS update 77DBCA97-29DC-42BA-9DB2-03C7B4D262D4 in sandbox C:\Windows\SoftwareDistribution\Download\2c728f96f2387c9d64aed5c97088b631
2015-02-22 19:24:16:095
940 1538
Handler Selected payload type is ptExpress
2015-02-22 19:24:16:124
940 1538
Handler UH: DpxRestoreJob returned 0x80070002
2015-02-22 19:24:16:124
940 1538
Handler Detected download state is dsHavePackage
2015-02-22 19:25:32:077
940 dcc
AU AU received policy change subscription event
2015-02-22 19:26:21:898
940 d40
Handler FATAL: CBS called Error with 0x80070002,
2015-02-22 19:26:21:899
940 1538
Handler FATAL: UH: 0x80070002: Async stage operation failed in CUHCbsHandler::StageCbsPackage
2015-02-22 19:26:21:909
940 1538
Handler FATAL: Request generation for CBS update complete with hr=0x80070002 and pfResetSandbox=0
2015-02-22 19:26:21:909
940 1538
Handler FATAL: Error source is 106.
2015-02-22 19:26:21:909
940 1538
DnldMgr FATAL: DM:CAgentDownloadManager::GenerateAllDownloadRequests: GenerateDownloadRequest failed with 0x80070002.
2015-02-22 19:26:21:909
940 1538
DnldMgr Error 0x80070002 occurred while downloading update; notifying dependent calls.
2015-02-22 19:26:35:006
940 1538
Agent *********
2015-02-22 19:26:35:006
940 d10
AU >>## RESUMED ## AU: Download update [UpdateId = {D0ABB478-FFD1-448A-9058-939C0B427AD4}]
2015-02-22 19:26:35:007
940 1538
Agent ** END ** Agent: Downloading updates [CallerId = AutomaticUpdates]
2015-02-22 19:26:35:007
940 d10
AU # WARNING: Download failed, error = 0x80070002
2015-02-22 19:26:35:007
940 1538
Agent *************
2015-02-22 19:26:35:007
940 d10
AU #########
2015-02-22 19:26:35:007
940 1538
Report REPORT EVENT: {3C6B2054-CE6F-4A29-9E94-D44AB5C4963F}
2015-02-22 19:24:15:004-0500 1
147 101
{00000000-0000-0000-0000-000000000000}
0 0 AutomaticUpdates
Success Software Synchronization
Windows Update Client successfully detected 2 updates.
2015-02-22 19:26:35:008
940 d10
AU ## END ## AU: Download updates
2015-02-22 19:26:35:008
940 d10
AU #############
2015-02-22 19:26:35:008
940 d10
AU Setting AU scheduled install time to 2015-02-23 08:00:00
2015-02-22 19:26:35:008
940 1538
Report CWERReporter finishing event handling. (00000000)
2015-02-22 19:26:35:009
940 1538
Report REPORT EVENT: {85DD7E1D-0632-44FF-81F3-34E75B954869}
2015-02-22 19:26:22:129-0500 1
161 106
{D0ABB478-FFD1-448A-9058-939C0B427AD4}
107 80070002
AutomaticUpdates Failure
Content Download Error: Download failed.
2015-02-22 19:26:35:181
940 1538
Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2015-02-22 19:26:35:181
940 1538
Report WER Report sent: 7.4.7600.226 0x80070002 D0ABB478-FFD1-448A-9058-939C0B427AD4 Download 106 Unmanaged
2015-02-22 19:26:35:182
940 1538
Report CWERReporter finishing event handling. (00000000)
2015-02-22 19:26:40:009
940 1538
Report REPORT EVENT: {E88B7854-8974-46BE-B243-143ED103C6FF}
2015-02-22 19:26:35:009-0500 1
188 102
{00000000-0000-0000-0000-000000000000}
0 0 AutomaticUpdates
Success Content Install
Installation Ready: The following updates are downloaded and ready for installation. This computer is currently scheduled to install these updates on Monday, February 23, 2015 at 3:00 AM: - Security Update for Windows Server 2008 x64 Edition
(KB2507618)
2015-02-22 19:26:40:009
940 1538
Report CWERReporter finishing event handling. (00000000) -
Windows Server 2008 Standard Drivers for Intel I217LM Gigabit Network adapter
Hi everybody,
I am unable to find Network drivers for Intel® I217LM Gigabit Network adapter for Windows Server 2008 Standard (32-bit). I have found the drivers for Windows Server 2008 R2 but that being 64-bit do not work.Kindly help me in sorting out this problem as I
am stuck need to install the drivers.
Thanks in advance.
SHOAIBPlease post your question in Intel forums : https://communities.intel.com/community/tech/places
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread. -
Windows server 2012 Standard Edition Licensing
We have SPLA aggrement with MS.
I know, can use two physical processors with Windows server 2012 Standard Edition.
If i am planning to install Windows server 2012 Standard Edition in a virtual environment, lets say it has four cores, then how many licenses we need to buy for this ? Is it like each core has been considered as an separate processor in virtual environment
for Windows server 2012 Standard Edition licensing ?
Thanks,
Amit.We have SPLA aggrement with MS.
I know, can use two physical processors with Windows server 2012 Standard Edition.
If i am planning to install Windows server 2012 Standard Edition in a virtual environment, lets say it has four cores, then how many licenses we need to buy for this ? Is it like each core has been considered as an separate processor in virtual environment
for Windows server 2012 Standard Edition licensing ?
Note that some information will be different for SPLA (so, check the SPUR to ensure you are in correct compliance).
http://www.microsoft.com/licensing/licensing-options/spla-program.aspx
http://www.microsoftvolumelicensing.com/DocumentSearch.aspx?Mode=3&DocumentTypeId=2
(if the information provided, clearly states that "this applies to all Volume Licensing programs", this also applies to SPLA, unless SPUR states differently)
(contact your reseller/partner/advisor, or MSFT VL team if you are unsure)
Windows Server 2012 R2 FAQ
http://www.microsoft.com/licensing/about-licensing/windowsserver2012-r2.aspx#tab=4
Windows Server 2012 R2 Licensing Guide
http://download.microsoft.com/download/E/6/4/E64F72BF-55E9-4D85-9EFE-39605D7CE272/WindowsServer2012R2_Licensing_Guide.pdf
Licensing Brief - Licensing Windows Server 2012 R2 for Use with Virtualization Technologies
http://www.microsoft.com/licensing/about-licensing/briefs/win2008-virtual.aspx
Licensing Brief - Licensing Microsoft Server Products for Use in Virtual Environments
http://www.microsoft.com/licensing/about-licensing/briefs/virtual-licensing.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)
Maybe you are looking for
-
In which table can I find Sales Deal Name?
Hi Guys, In which table can I find Sales Deal Name for the corresponding Sales Deal? Regards, Shashank.
-
Iweb - a film editor's NIGHTMARE - need thumbnails on one page...!
I'm a film editor and I have put my portfolio / my reel online in the past year using iweb and my site is separated into four pages and with mpeg4 movies on each page as thumbnails that the viewer can click on to watch one at a time. The spots are ro
-
3D sometimes rendered transparent...? (Windows)
It's actually quite hard for me to reproduce this "glitch" but ever so often after changing/updating the texture of a 3D layer in Photoshop, when I go back into the main document and it updates the texture, it will render "transparent" I put "white"
-
Any idea how to set up an signature with photo on ipad?
trying to set up an signature on my ipad in mail. I would like to include a picture in the signature. Any Idea how to process?
-
Hello, I have developed some reports for HR using InfoCubes 0PAPA_C02 and 0PA_C01. My reports are based on Company Code, Personnel Area, Country Code. The Problem that I am facing is how to restrict employees related data based on company Code, Count