USB Controller Driver cannot be found? How to get a copy....

My USB Controller on my mother board keeps comming up as uninstalled drivers. I have XP with SP-1 installed. This is happening all of a sudden. It has been working fine form many months. I cannot force the system to find the drivers, and the MSI site has none to download. Has anyone seen this happen before, or do you have any suggestions on how to get my USB ports working again.
I have already deleted the controller device and tried to let auto detect install the drivers. It still cannot find them on the system or the CD that came with the mother board.
Any help is appreciated.
thanks in advance... ;(

that is strange cause any windows later than 95 auto detects system devices. And can you tell us what board do you have in your system. if you write to this forum you must have a via chipset motherboard so goto Via Arena and download latest chipset drivers.

Similar Messages

Satellite A40 - Error code 10- D: drive cannot be found

HELP PLEASE!!!
I really need some help to fix the errors on my system.
A short while ago i accidently deleted the DVD+/- optic drive to my laptop, and when I go to my computer it isnt there?
The sys. tells me that the D: drive cannot be found, and the drive was removed without preperation and cannot be found, Error code 10.
What does this mean, as I have tried to update the BIOS, and it does not need it, and i cannot find a driver for the Satellite A40 from Toshiba.
Also the drivers appear to be ok and the boxes are ticked in the device management, altho the optic drive sometimes has a yellow exclamation mark?
Tried the recovery disk and no luck.
Also the drive doesn't work now, as it doesnt read disks!
Here is the spec. for the computer, and the summary for the error messages. Wouild reallr appreciate any help on this please . . . .
My Computer Information - General
Please wait while information is being collected...
100% (collecting Local Disk information)
Refresh screen
Specifications
TOSHIBA
System Model: Satellite A40
BIOS Version: TOSHIBA Version 1.50
Operating System
Microsoft Windows XP Home Edition
Version: 5.1.2600
Service Pack: 1.0
Location: C:\WINDOWS
PID: 55277-OEM-0011903-00111
Hot Fix: Q817606
Memory (RAM)
Capacity: 2 GB
Here is a listing of the Dr watson error reports that appeared don the system.
25 January 2009 Service Control Manager The Application Management service terminated with the following error: The specified module could not be found.
25 January 2009 atapi The device, \Device\Ide\IdePort1, did not respond within the timeout period.
25 January 2009 Cdrom The driver detected a controller error on .
25 January 2009 atapi The device, \Device\Ide\IdePort1, did not respond within the timeout period.
25 January 2009 Service Control Manager The following boot-start or system-start driver(s) failed to load: Cdrom
25 January 2009 PlugPlayMa nager The device 'T S I A D D-R M S - 6!1"' (IDE\CdRomT_S_I_A_D_D-R_M_S_-_ 6!1"________________1#3"____\3 423362730283321372620202020202 020202020) disappeared from the system without first being prepared for removal.
31 January 2009 Cdrom The driver detected a controller error on .
31 January 2009 Service Control Manager The following boot-start or system-start driver(s) failed to load: Cdrom
24 January 2009 Applicatio n Error Faulting application helpctr.exe, version 5.1.2600.1106, faulting module kernel32.dll, version 5.1.2600.1106, fault address 0x0001a67a.
25 January 2009 MsiInstall er Product: ParetoLogic DriverCure -- Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action DeleteScheduledTask, location: C:\Program Files\ParetoLogic\DriverCure\D riverCure.exe, command: -deletetask
25 January 2009 Applicatio n Hang Hanging application switch.exe, version 0.0.0.0, hang module hungapp, version 0.0.0.0, hang address 0x00000000.

Run Regedit, and remove the Upperfilters and Lowerfilters values from the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class{4D36E965-E325-11CE-BFC1-08002BE10318}
Then Reboot. If your CD/DVD burning software fails to work, reinstall that software.

Usb controller driver

my wireless keyboard will not work and device manager is showing a USB controller driver missing. When i tried to update driver it didnt fix the problem. i downloaded chipset driver and that didnt fix the problem. the wireless mouse works fine but the keyboard wont work. Any sugeestions my warranty just expired and i have tried everything that i could find on google. thank you

Hi:
You are missing a letter or something from the model number you posted.
Please post the product number which can be found on the same sticker as the serial number.

USB Controller Driver (3.0) for Windows Server 2008 Standard Edition 32-bit

Hi,
I have recently built a HP DL320e Gen8 v2 server with Windows Server 2008 Standard Edition 32-bit & it's missing the USB Controller Driver which HP don't have. I have searched endlessly online without success. HP suggest I try Windows but I couldn't
find it in the Download Center either.
Can somebody please provide me with the USB Controller Driver for Windows Server 2008 Standard Edition 32-bit?
Regards
Naz

Hi,
Thanks for your posting.
For this issue, i think you need to search in the HP official website or contact the HP support.
Regards.
Vivian Wang

I recently restored my iPad and had a film on it, now when I go to sync the film cannot be found. how do i recover the film without purchasing it again?

I recently restored my iPad and had a film on it, now when I go to sync the film cannot be found. how do i recover the film without purchasing it again?

You can't recover it withou buying it again. You should be backing up purchased films in iTunes on your computer. iCloud does not work with purchased films. Apple does not have the rights from the movie studios to allow for them to let you download it again for free.

I am trying to set up my apple tv on a sony KDL - 40xbr4. The remote is a sony RM-V302. I plugged it into the HDMI IN on the side of the TV but cannot find out how to get to that input. I am at a winter rental property and brought my Apple TV with me.

I am trying to set up my apple tv on a sony KDL - 40xbr4. The remote is a sony RM-V302. I plugged it into the HDMI IN on the side of the TV but cannot find out how to get to that input. I am at a winter rental property and brought my Apple TV with me. I did check internet for solutions. The instructions I found said to use a "home button" on the remote. There isn't one. I sure would appreciate help if someone knows a solution. My first post - hope I did this right.

if its anything like my Sony, theres a button top left corner that upon each press i get an audible bleep and the AV inputs come up on screen, i then cycle down to whichever input i wish to select!
in case your remote is different, the button on my remote has a square with a slightly smaller square just overlapping the first square.
hope that helps?
rgds Lee.

I have a new iMac running iTunes 10.4 in OS 10.6.8, and a new Mac Air running iTunes 10.4 in Lion. I was able to transfer all my music etc. from the iMac onto the Air, but cannot figure out how to get the Playlists from the iMac to the Air. iTunes Help

I have a new iMac running iTunes 10.4 in OS 10.6.8, and a new Mac Air running iTunes 10.4 in Lion. I was able to transfer all my music etc. from the iMac onto the Air, but cannot figure out how to get the Playlists from the iMac to the Air. iTunes Help says File >Library >Export playlist and choose XML, or to save a copy of all your playlists, File > Library > Export Library, "the Exported info is saved in XML format." Then it says, "to import an iTunes playlist, File > Library > Import Playlist". Now I am assuming I do that import part on the Air, but when I try it doesn't recognize anything that can be imported - what am I missing??? Aside from a clue...

Thanks, Jim, for taking the time, but the reply is unfortunately vague in the exact area of my confusion! "you need to copy that file to your new computer..." Well, the Import/Export instructions make it seem as if the two computers should be able to communicate this file thru wifi, but that's the linkage I can't seem tocreate with Import/Export. Should I instead email a copy to myself (thats what applecare suggested)? Copy it to and from a thumb drive? But then place the file where? And the article was helpful, but should I be trying to move the Library file or the Library.xml file (as iTunes Help suggests)? Sorry to be so clueless about it...I suppose I buy Apple in the hopes of not having to think about this stuff, which approach seems not to be serving me well. Thanks again for your time!

I have a FCP event and project with all accompanying media saved on a harddrive. I am now attempting to open the files on another computer that also has FCP X. I cannot figure out how to get it to open.

I have a FCP event and project with all accompanying media saved on a harddrive. I am now attempting to open the files on another computer that also has FCP X. I cannot figure out how to get it to open.

The events and projects folders have to be on the top level of the drive for FCP to recognize them.

I purchased a book from itunes and cannot figure out how to get it on my ipod nano 7. I cannot find an answer that works.

I purchased an audio book from itunes and cannot figure out how to get it on my nano 7. I have tried everything.

Have you double checked to make sure these Audiobooks are configured to sync to your iPod from under the iPod's Books configuration tab in iTunes? This is assuming that the audiobooks are already stored in your iTunes library and appear under the Books category.
To access this configuration tab, plug in your iPod and select it from under the Devices section in the left hand pane of iTunes to bring yourself to the iPod's Summary tab. Now locate the Books tab across the top in the main iTunes window and select it. Here you can configure what and how audiobooks are synced to the device.
If you make any changes to this tab, make sure to hit the Apply button on in the lower right hand corner. This will sync the updated changes to your device.
B-rock

I recently got an Ipod touch model A1213 and I cannot figure out how to get apps on it. I have tried everything and when I try to update software, it says Im already up to date, but my software version is only 1.1.5. How do i fix it?

I recent recieved and Ipod touch model A1213 and i cannot figure out how to get apps on it. I have tried everything i can think of and when i try to update my ipod software it tells me that its already up to date. even though its only 1.1.5. How do i fix it?

You have a 1st generation iPod Touch.
It can be updated to 3.1.3 by purchase. See here Purchasing iOS 3.1 Software Update for iPod touch (1st generation)

I'm having a lot of issues with firefox and cannot figure out how to get help. It began when I updated to 13. I get all kinds of ad popups, I cannot play one

I'm having a lot of issues with firefox and cannot figure out how to get help. It began when I updated to 13. I get all kinds of ad popups, I cannot play one game on FaceBook called Farm Town at all, and I keep getting an AVG popup about cookies that I cannot get rid of. These issues are causing me to use Chrome very often even though I like Fox better. I've searched and searched how to get help and cannot find anything. How does one get personal technical help?? These issues do not happen in Chrome at all. Thanks.

Do a malware check with some malware scanning programs on the Windows computer.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.<br /><br />
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
You can also do a check for a rootkit infection with TDSSKiller.
*http://support.kaspersky.com/viruses/solutions?qid=208280684
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

My 2 year old has deleted my 'apps store' icon and I cannot figure out how to get it back? Doesn't seem to be available in the on-line apps store, ironically enough

My 2 year old has deleted my 'apps store' icon and I cannot figure out how to get it back? Doesn't seem to be available in the on-line apps store, ironically enough

He dragged the icon out of the dock at the bottom and disappeared. That icon is merely a "shortcut" that opens the application when you click on it.
You still have the app. Open your applications folder and look for the App Store app icon. Click and hold down on the App Store icon and drag the icon down into the dock to replace it. That puts the shortcut back into the dock.

I lost the little white balance dropper thingy and the option to change exposure and cannot figure out how to get them back! Help! Thank you!

I lost the little white balance dropper thingy and the option to change exposure and cannot figure out how to get them back! Help! Thank you!

Are you saying you've lost the "Basic" tool tab?
If yes, just right-click on one of the other tabs and select "Basic" from the context menu that's presented.

HT203163 I appear to have transferred to the US store and cannot find out how to get back to the UK store- can you help ?

I have managed to get into the US store and cannot work out how to get back to the UK store - can you help?

See > Change your iTunes Store country
Here > http://support.apple.com/kb/HT1311
Settings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region = Change Country / Region

Cannot figure out how to get 3rd party plugins to load

Hey All.
I'm attempting to use 3rd party plugins (specifically, ValhallaFreqEchoMkI 1.01), and I cannot figure out how to get them to show up in MainStage (ver 3.0.4). I know how to use native plugins as chanel strips and in the Audio FX section on the strip, but I cannot figure out how to ACCESS the patches I have downloaded. Please help!
-thanks, Jim

All,
To turn on the CMSS features. The sticky at the top of this (Sound Blaster) forum covers the steps on how to enable surround sound effect or you can check out the Knowledgebase article for the steps.
For those with PlayCenter software, you could check the Extigy as example.
http://us.creative.com/support/kb/ar...p?l=2&sid=4883
Jason

USB Controller Driver cannot be found? How to get a copy....

Similar Messages

Maybe you are looking for