USB Dard drive doesn't show up after i failed to eject it

i turned off a usb external drive without ejecting it first and now it doesn't show up on the desktop,
when i run disk utility it just shows the gathering disk information but doesn't get past this unless i turn off the drive again. is there a way of fixing this as i've has it happen before and after a while the drive comes back after i leave it for a while.

for some reason it just came back on after i left it for 10 minutes.

Similar Messages

USb external drive doesn't show up

Hello all !
Can't manage to find the post I had read about this months ago so I ask again. I have an external USB 2 Iomega 80Gb HD that works great except that when I shut down the computer and then restart it, every other time it won't mount and I have to unplug the USB plug, shut the drive off and on and then plug. Kinda boring. It was minor problem lately as I never turned the computer off but put it in deep sleep instead but as I state in another post, my new PCI card seems to prevent the computer from getting to deep sleep so if I now HAVE to turn the computer off, I want to find the solution for that drive !
I remember reading a post long ago about someone with the same problem, same drive and about formatting it to HFS+, which I did and it had improved things indeed.
Can anyone help?
Thanks in advance.
Vince

Maybe your model has an SMU instead of PMU. Read here on how to reset
http://docs.info.apple.com/article.html?artnum=300341

I want to set up my iphone to sync with my macbook but when I plug it in via USB my iphone doesn't show up under devices in itunes even though it is plugged in correctly and is charging through my computer. How do I get it to show up?

I want to set up my iphone to sync with my macbook but when I plug it in via USB my iphone doesn't show up under devices in itunes even though it is plugged in correctly and is charging through my computer. How do I get it to show up? I've tried restarting my computer.

If your iPhone does not appear under Devices in iTunes after you connect it to your Mac, refer to the troubleshooting suggestions here:
http://support.apple.com/kb/ts1591

URGENT Trying to wipe and reinstall Leopard 10.5 on my 2008 imac8,1 from the disk but my hard drive doesn't show up

So to give a little big of a background on my computer. I got it January 2009 as a graduation gift, because I was going to get a degree in Graphic Design and Animation. I only worked on it [mostly brousing the web, and itunes] for about 6 months because I was taking all of my general courses for college. I then met my boyfriend [late 2009] and moved in with him, my boyfriend has a macbook so I left my mac at my parents house. I was only Using it every now and then and it would be idle/ or shut off the rest of the time.
Fast forward to fall 2011. Me and my boyfriend live in a condo so I brought my computer over because I am now taking graphic design courses and need my computer. I installed a free 30 day trial of adobe cs5.5. It made my computer kind of slow and it froze alot even though I still have over 250gb's of memory in it. After the trial ended I kind of stoped using my computer again, rather installing the free trials of cs5.5 on my mom and my boyfriends macs until I had enought money saved up to buy it.
Here's where it gets tricky.
So now its March 2012 and I tried uninstalling the trial of cs5.5 on my computer since it was just taking up un needed space. I had to uninstall all of the programs one at a time other wise it would freeze up. I have had to hold the power button down to get it to turn off because i couldn't even move the mouse even after waiting a while. Anyhow I get to the last program and it keeps freezing, I tried shutting down my computer via<apple< shut down. But when I start it up again I got a file with a question mark flashing on my screen. So I looked up how to fix that and had to locate where to start up [I selected my hard drive] then I was able to get on to my computer.
So then I go to disk utilitys and do a repair on my internal hard drive to fix if there were any messed up files. After the files are repaired I figure I'll restart it and let everything get up to date. When I do I get the gray screen with the apple and the spinning wheel. This happens OVER and OVER. I tried soft reseting it, manually turning off the computer, you name it. But it still keeps happening. So I figure I'll just wipe it clean and reinstall the whole thing. [I have it backed up on an external drive]
I try to reinstall leopard 10.5 from the disk that came with my computer, all goes well until I gets to the 3rd screen where you select where to save it to, my hard drive doesn't show up. But if I connect my external hard drive it shows up right away. I try seeing if it pops up on disk utility, and it doesn't show up there either.
Is it possible that my hard drive is shot? I haven't really used my computer that much. Its pretty much sat at my parents house for 2 of the 3 years I've had it. So its not like I used it a whole lot.
Help! I'm a college student who needs her mac now more than ever for my design classes!

The battery alone is a $5 to $15 part. Hard drives vary in cost, and depending on the iMac, they may or may not be able to install a third party hard drive, or one resold through Apple.    The resold through Apple drives tend to cost more. This article discusses the varying successes of third party drives on iMacs:
http://blog.macsales.com/10146-apple-further-restricts-upgrade-options-on-new-im acs
The labor costs depend on the store as well as the time to get the parts in stock.    Call around.

Western digital hard drive doesn't show up anymore

I bought a Macbook Pro a few months ago and I've been using my Western Digital external USB hard drive with up until now with no problems. Then today for some reason, I turn my computer on and the drive doesn't show up anymore. It doesn't show up in disk utility either. I've rebooted a few times but no luck. I inserted a flash drive and it mounts ok so it's not the USB port. I even switched usb cables just in case the cable was bad. Any suggestions?

Hi there
Sorry to hear you are having trouble with your Mac.
Is the ext HD a powered drive (needs AC power to run) or portable? (smaller, doesn't need to be plugged in to AC)
If its AC powered, check that all the usual lights are lit up on it (flashing activity light, power light etc), if not, then you would need to contact WD.
You can also try resetting the SMC & PRAM, as I have seen this cause a HD to not mount before.
Cheers

My external hard drive doesn't show up in finder, is it dead?

My external hard drive doesn't show up in finder.Time machine can't find it. Does this mean my external hard drive is dead?
I borrowed a friends and switched mine with hers. My acted the same way in her macbook. I switched the cords on the external drives, no change.
Also, Is there a way to retrieve the information from my sick external hard drive? Thanks for your help.

If the Disk Utility sees it, you might be able to repair it or recover the data on it with a product such as DiskWarrior or Data Rescue.
If the Disk Utility doesn't see it, contact professional support.
(64290)

ICloud Drive doesn't show up my Numbers folder on my new macbook pro.. what to do?

iCloud Drive doesn't show up my Numbers folder on my new macbook pro.. what to do?

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

HT1145 I can't see my files on my USB shared drive. It shows there is lots of space taken up, but I can't access the files via my Mac.

I can't see my files on my USB shared drive. It shows there is lots of space taken up, but I can't access the files via my Mac. How do I see them? I also can't see them on my iPad using FileBrowser.

You don't have access to it to configure it via Time Machine? You lost me on that one, Time Machine is used for Backup.
Here is a basic article on the first setup and what you should see:
http://support.apple.com/kb/HT1178
To configure Time Capsule you should be using "Airport Utility" 5.3 or higher that is located in the Utilities folder. You can tell if its version 5.3 because the icon will have blue lines instead of orange lines like the older versions. Since you are running Leopard 10.5.6 and you ran Software Update you are probably already running the latest 5.3 version.
The light flashing amber means you haven't entered enough information so that it can get to the internet. Once you have that info entered the light will turn green.
If your absolutely sure your CAT5 cables are good you can try a hard reset. I think you have to push the reset button on the back and hold it for 5 seconds or so until the amber light blinks rapidly, then when you release the button it does the reset then.
http://support.apple.com/kb/HT1300?locale=en_US
Hope this helps! If not I would probably call AppleCare support or see if you can exchange it.
-Dan

My DVD/CD drive doesn't show up in finder, it does via VM ware on XP, how do I get it to show up in both OS

my DVD/CD drive doesn't show up in finder, it does via VM ware on XP, how do I get it to show up in both OS

If the Disk Utility sees it, you might be able to repair it or recover the data on it with a product such as DiskWarrior or Data Rescue.
If the Disk Utility doesn't see it, contact professional support.
(64290)

Hi, my dvd drive doesn't show on my computer and device manager. can anyone help me?

Hi, my dvd drive doesn't show on my computer and device manager. can anyone help me? Notebook HP dv6700z.
This question was solved.
View Solution.

Hi,
If the drive is not showing in the list of bootable devices, you can be fairly certain that it has suffered a Hardware failure and will need to be replaced.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Lacie Rugged external drive will not show up after Yosemite update.

Lacie Rugged external drive will not show up after Yosemite update. It show up in disc utility I can't access it.

I have the exact same issue. Have you had any luck with a solution?

USB Drive doesn't show up in My Computer

I have a 2.5" Seagate 500GB 7200RPM laptop drive mounted into a USB case. I plug it into my USB port along with another one that goes from DC to a different USB port. In Device Manager, it is shown as "ST950042 0AS USB Device," which tells
me that it is being seen. However, when I open "My Computer," the drive does not show up. I have a failing drive that I keep all of my media files on and am trying to back that up to this drive, however, I cannot get a drive letter assigned to do open the
drive and back up my files.

Why doesn't my one still work?
i got my important work there!
If you seriously want some assistance with your problem, then start your own post and provide lots of details about your system and your situation. Absolutely no one can provide an answer to such an abstract question. You mus provide details,
lots of details.
Read the Microsoft KB @ http://support.microsoft.com/kb/555375 on how to ask for help and then start your own thread.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

External hard drive doesn't show after upgrade to Yosemite

I upgraded to Yosemite and now my WD 1TB external HD doesn't show up on my MacBook Pro 2.9 GHz. It shows in the system information under 'About This Mac', but I can't access it. So I can't use Time Machine to do any back-ups, and I can't back up the files on the external drive before reformatting it. Anyone know how to fix this? From other web communities, this seems to be an Apple problem and NOT a hardware issue.

If it shows in Disk Utility, use the Restore tab to copy the files to another location. Note the warning about reformatting the destination.

My external hard drive doesn't show anymore

Hello Everyone,
I hope you can help me. Today I wanted to put new data on my WD hard drive, I have it for almost a year and always worked fine (it's just USB, no power necessary). But my External HD was almost full so I deleted the "time machine" back-ups. Now, my Macbook Pro or iMac doesn't show my WD in Finder. I can find it in Disk Utility but only for a few seconds. Can someone please help me by giving some tips or own experiences? Thanks!

If you want LR to show the full path of a directory tree as it is on an actual drive, you are going to have to fool it into showing it to you.
a) Place a COPY of a photo, ANY photo, in the directory/folder that you want to show as the root of your folder tree in LR.
b) Using "Import Photos from disk" import ONLY the photo that you placed in the 'root' folder, by DOUBLE-CLICKING on it so that only it is imported.
c) After the import, your folder structure should now look the way that you want it to in LR, matching the actual drive structure from the root upwards.
d) Using LR, delete the photo that you used as a placeholder. The LR Folder structure should remain intact.

External USB hard drive doesn't mount until reboot

Hey there. I bought an external USB hard drive (a 250 GB drive by ComStar) last week, and I'm having trouble getting it to mount. The first time I plug it in, it works fine and shows up on the desktop. When I remove it (having properly ejected it first) and plug it in again later, it doesn't show up. It's not on the desktop, it's not in Disk Utility, and it's not in /Volumes (via the Terminal). If I reboot my Mac, it's there again.
Has anyone else had this problem with external drives? Are there any solutions or workarounds?

The first time I plug it in after a boot up. It doesn't matter if my Mac has been up for three weeks -- if it's the first time I've plugged in the hard drive since the last reboot, it always works perfectly.
It's very strange and annoying. It's almost like it's not getting ejected properly.
That being said, I just ejected and unplugged it, waited five minutes, and plugged it back in. The stupid thing worked this time. It's driving me nuts! I don't mind things that don't work, but things that work sometimes are really frustrating. If no one else is having this issue, it's probably something unique to this particular drive.

USB Dard drive doesn't show up after i failed to eject it

Similar Messages

Maybe you are looking for