USB data link to Belkin USB Printer Adapter

I am using a T6295ZM/A DLINK BLUETOOTH MODULE DB connecting to a Epson R200 prinmter through a Belkin USB Printer Adapter. Printer error messge Paraphrased "can't communicate with printer."
Using Bluetooth pane in preferences I can see the adapter and the blue LED is flashing. When message is displayed "Geting additional information from printer" it just freeezes. There is no query for paring. Any help will be appreciated.
1 mini-tower G5, 3 G4s 1 mini-tower 2 notebooks Mac OS X (10.4.3)

Sems like someone should know answer to this question

Similar Messages

HP Laserjet 4100 and Belkin USB Parallel Printer Adapter

I'm a brand new Mac user. I wanted to connect my Mac to my existing HP Laserjet 4100 printer. To do that, I had to purchase a Belkin USB Parallel Printer Adapter. I saw that Mac wasn't supported by this adapter, so I called Belkin and they said it was supported. Tried to set it up and failed. Called Apple for help, was on the phone for quite a long time, and no luck. Went to HP site to load drivers, and no luck. I contacted HP online and was told this product is no longer supported.
So right now when I try to print, I get a message that says the printer is offline...but it's not. Anyone have any ideas for a workaround?
Thanks so much for any thoughts.

I think you should be a little more patient in trying to find a solution. I have an HP Laserjet 4ML from 1992 that I still use every day.
In my case, I purchased an HP Jetdirect external parallel print server and have the printer connected to my router that way.
You may also want to power off the printer, reset Printing System, and then power on the printer and re-Add it in Print & Fax.
http://support.apple.com/kb/HT1341

Belkin F8T03 USB Printer Adapter: Anybody ever got this working?

I've got quite a few bluetooth devices working with my new iMac 24, including Apple keyboard, mighty mouse, Palm device, Motorola Razr, phone headset, so pairing bluetooth devices is old hat for me.
I cannot for the life of me get this printer adapter working. I've tried for hours. I've seen several posts on the web that indicated they had success. What's the secret?
I am trying to unwire my Label writing printer from my iMac to minimize wires on the desktop.
v/r
bill

Did you find a solution Raf SR?
I have a similar problem. After initial (updating/restoring) issues with my ipod mini which I won't bore you with, I got it working and charging successfully through my PC via the USB cable. Then I bought a USB power adapter for when I am away from my PC. When I connected my ipod to the power adapter it did the brief "do not disconnect" thing then "OK to disconnect" with no attempt to charge. I left it overnight and the following morning it had the battery/triangle/exclamation mark symbol and I had to reset the ipod to get it to work (I did this while still connected to the power adapter).
I borrowed a friend's firewire power adapter and that worked fine. I went back to the store and swapped my usb power adapter for another (firewire power adapter wasn't available) and it did the same as the first one. The ipod still charges fine via the PC and usb cable.
I don't get it! Can anyone help? Thanks
Compaq Windows XP

Can i connect to a 'belkin USB Hub' so i can print and save images direct from my ipad 2..

I have just bought a 'Belkin USB Hub' so that i can have my printer and external hard drive in a home office rather than carting them around the house or having to sit in my back room when i want to print from my mac lap top, works fine , but my question is, is it possible to connect my ipad 2 to the hub so i can edit and print directly from that rather than having to re-sync to my laptop.

The only solution to enable printing with the iPad is via WiFi or by using one of the HP AirPrint compatible printers.
AirPrint-enabled printers
HP Envy e-All-in-One series (D410a)
HP Photosmart Plus e-AiO (B210a)
HP Photosmart Premium e-AiO (C310a)
HP Photosmart Premium Fax e-AiO (C410a)
HP Photosmart e-AiO (D110)
HP Photosmart eStation (C510)
HP LaserJet P1102w Printer
HP LaserJet P1606dn Printer
HP LaserJet Pro CP1025nw Color Printer
HP LaserJet Pro M1212nf MFP
HP LaserJet Pro M1213nf MFP
HP LaserJet Pro M1214nfh MFP
HP LaserJet Pro M1216nfh MFP
HP LaserJet Pro M1217nfw MFP
HP LaserJet Pro M1536dnf Multifunction Printer
HP LaserJet Pro CM1415fn Color Multifunction Printer
HP LaserJet Pro CM1415fnw Color Multifunction Printer
HP LaserJet Pro CP1525n Color Printer
HP LaserJet Pro CP1525nw Color Printer
HP Officejet 6500A e-AiO
HP Officejet 6500A Plus e-AiO
HP Officejet 7500A Wide Format e-AiO
HP Officejet Pro 8500A e-AiO
HP Officejet Pro 8500A Premium e-AiO
HP Officejet Pro 8500A Plus e-AiO
If you don't own of these printers you will need a third party app that will allow you to print. Print n Share, Print Central, and others are available in the App Store. Some of these apps will work only if your computer is turned on and may need a helper app for the computer as well. if you have a Mac you can use Printopia. The computer must be on for this app as well. Print Magic has been mentioned on this site a few times. Google or check the App Store.

Is it possible to print from iPhone 4 on a non wireless printer via use of the USB data / charging cable

Is it possible to print from iPhone 4 on a non wireless printer via use of the USB data / charging cable.

No

G4 powerbook doesn't recognize epson 3000 using usb parallel printer adapte

i downloaded and installed driver per instructions from epson (epson10860). my epson 3000 does not appear on the list of printers in the mac print setup utility. (selected epson usb in window after selecting "more printers." i'm using a usb parallel printer adapter. anyone know why it's not recognizing my printer?

the parallel adapter is the most likely problem, and it probably will never work, as from what I've ever seen, OS X does not support parallel connections.
Your best bet is to buy a new printer.

Mac OS 10.5.5 and Belkin USB Bluetooth Adapter

I upgraded to Mac OS 10.5.5. this morning and upon restart I lost the ability to turn on Bluetooth (Belkin USB bluetooth adapter). The adapter is visible to the computer, but it can no longer be turned on so I can benefit from its use. I checked Belkin's site -- no upgrade there. I believe it is an OS 10.5.5. issue since it worked before the upgrade. I have tried looking at Bluetooth preferences -- the option to turn on is "greyed" out. File Sharing, Network, and Security system preferences were of no help. Anyone have any ideas.
Thanks,
Doug

Hi there,
Did you ever resolve this problem, because I am having exactly the same problem with my Intel iMac running 10.5.5 and Belkin F8T012 USB Bluetooth.
I too have found that using "Bluetooth file exchange" seems to turn on Bluetooth, so thanks for that advice, but it's hardly acceptable is it?
I can plug the same USB into my laptop (running 10.4) and it turns on perfectly!

D-Link DBT-120 USB Bluetooth Adapter: connecting to headsets or not???

Hi there!
I want to use a headset with my G5, using a BT USB adapter. Mine doesn't work, so I'm thinking - unhappily - of buying a D-Link DBT-120 USB Bluetooth Adapter.
But: in the Apple Store, they say it does not work with headsets!!!
On the other side, people in the board here are claiming that it works, if you apply the firmware updater.
Which one is right??? I can hardly belive that Apple using untrue negatif customer feedback as a marketing strategie... so I'm a bit confused.
==>>> I would like to hear from people who are using the D-Link DBT-120 USB Bluetooth Adapter if they are able to connect to a headset or not (even people not having a headset can test this, just run the BT hardware wizard, selecting headset, and see if there is the error or not).
Thanks a lot.
Gilbert

Using a headset needs several steps even needed if you have the latest computer or Mac OS X release. Please make sure to follow them in order.
Download the Apple Bluetooth Firmware Updater
Install it
Launch it from Applications > Utilities > Bluetooth Updater
Apply it to your adapter (takes very long).
Start the Apple Bluetooth Assistant and select Headset. Do not use anything else!
Make your headset Bluetooth visible. Look up the manual of your headset how to do that.
Now select the headset in System Preferences > Sound.
In most cases step 3 is missed. You have to start the already installed updater yourself (do not ask me why).

Virtual PC v 6.10 and the Belkin USB Serial Adapter F5U103

Trying to run Virtual PC v6.10 on a G4 with OS 10.4.10.using Windows XP.
When booted up in OS 9 my Belkin USB Serial Adapter F5U103 is recognized along with the hardware connected to it. Not so when booted up in OS X. Will purchasing a new Mac that can boot up in Windows XP possibly have the same issue (i.e. not recognizing the Belkin USB Serial Adapter F5U103)?

I'm running Virtual PC v 6.10 because I only need it for one application that I run at most once every two weeks. Do you think v. 7 will allow me to use the Belkin USB Serial Adapter F5U103 on OS X?

Printing issues via a Belkin USB hub to a Samsung ML-2240

Hello All,
I am trying to help a friend of mine setup wireless printing from her Macbook. Unfortunately I don’t know very much about Macs and OSX but I am a quick learner
The setup:
Virgin Media Cable Modem -> connected (RJ45) to a Wireless Linksys Cable Modem -> connected (RJ45) to a Belkin USB Hub.
From the USB hub I have two printers connected:
1 x HP Deskjet
1 x Samsung ML-2240 Laserjet
Both these printers install to the Macbook perfectly as default USB devices (wirelessly) via the USB Hub. They also appear correctly in the Belkin USB Hub software console.
The HP printer works perfectly every time it is used, no issues whatsoever. The Samsung printer prints ok the first time but the print jobs do not disappear from the print queue on the Macbook, the print job doesn’t appear to complete even though it has actually printed without any issue.
The problem this causes is that after the first print job has been printed it is not possible to print again. Even if I delete the print job from the queue manually I cannot still not print a second time. The only way I can get the printer to print again is to unplug and then plug back in the USB cable that is connected to the USB Hub. When I unplug the cable the print job disappears from the queue on the Macbook. I can then reconnect the USB cable and connect to the printer and it will print again.
I have made sure that I have the latest firmware on the Macbook which is running 10.5.* OSX. I have also installed the latest Firmware and Drivers on the Samsung Printer and the USB Hub.
Is there a different way to setup the print queue that you think may help? Any ideas would be greatly appreciated. I spent 5 hours on this yesterday and it still isn’t working
Thanks
M

Further info:
- it appears that the firmware version is 5.7 on this AirPort Extreme
- when I plug in my other printer (Samsung ML-1710), it appears in the list of USB printers in AirPort Utility.
- unfortunately, the ML-1710 is no longer supported in Snow Leopard
- under Printer Setup, Driver, I selected Generic PCL Laser Printer for the ML-1710 as a test - the print queue opened, my printer did its "about to print sound", the print queue told me the job had printed, but nothing came out (yes there was paper )
- found the entry below (from Neptune78 on http://discussions.apple.com/thread.jspa?messageID=10067336&#10067336) re. driver for ML-1710, followed steps successfully until the final printing part when the printer stalls and pauses @ 10% printing stage
Any help appreciated
+Re: It's desperate!! - can't use my Samsung laser+
+Posted: 30-Aug-2009 2:13 PM in response to: ChuckInNJ +
+I got my ML-1710 working today on Snow Leopard. Here's what I did:+
+1. Go to System Preferences -> Print & Fax -> delete printer from the list.+
+2. Reinstall the drivers found here: http://www.samsung.com/au/support/download/supportDownDetail.do?group=printermul tifunctionfax&type=printermultifunctionfax&subtype=monolaserprinter&modelnm=ML-1710&disp_nm=ML-1710&language=&cate_type=all&mType=DR&dType=D&vType=&cttID =196410&prd_ia_cd=06010400&modelcd=&menu=download&menu2=detail+
+3. Return to System Preferences -> Print & Fax and add the ML-1710 back to the list of printers. In the "Print Using" dropdown, you should be able to select "Samsung ML-1710" (if not automatically selected).+
+4. Click "Add"+
+You should now be good to go.+

G4 Won't Boot after Tiger install and Belkin USB Network Adapter install.

I'm sure this would apply to my G5 as well.
I installed Tiger on my G4 and it restarted and opened to desktop. Great!
Next, installed software drivers from Belkin USB Network Adapter.
Restarted computer,
Screen has firmware 'like" look asking me to type mac_boot.
I do this and the next screen is all grey with two small purple folders in the corner. I believe one was flashing!
Nothing happens just stays there.
How can I get back to normal boot mode?

tigerswim, welcome to Apple Discussions.
Did you already have Tiger installed or did you have Panther 10.3 installed? Tiger is not a free upgrade; you have to buy it & then update (for free) using the download updates from Apple. Also, you have to use a universal/retail install DVD (or CDs) to install Tiger. You cannot use the install DVD from another model Mac.

IOGEAR Wireless USB Print Adapter (Bluetooth)

Hi
I just bought the IOGEAR Wireless USB Print Adapter (Bluetooth) model GBP201 but can not pair it with my Mac Book Pro. Contacted IOGEAR and they say Mac does not support Bluetooth printing. I am not about to believe that! Does anyone have any helpful information on the subject? Thanks

I'm not familiar with that device, but I doubt that it advertises itself over Bonjour, so you would have to select the IP tab in the printer Add dialog, enter the IP address, and choose either LPD or IPP for the protocol (either one might work.)

Airport Extreme, with Belkin usb 7 Port powered hub, with printer & 2 HD's

I have the Belkin usb 7 Port hub going into the Airport Extreme, my Macbook Pro sees the printer and prints fine, but doesn't see the 2 western digital mini hard drives My AE still has a green light. Is there something else I have to do? Thanks, Schooner

Hi Schooner17-
Are the drives bus-powered?
If so, do they work with the hub on a Mac? Do the drives work 1 at a time?
That hub might not supply enough juice to power both drives.
Luck-
-DP

USB parallel printer adapter

I have a HP Pavilion notebook. I bought a USB Parallel Printer Adapter to connect it to my two printers
HP Deskjet 540 and
Hp deskjet 820Cse, Professional series
but I cannot make the printers work. Since the printers are old, HP is unable to help me. Could anybody tell me how to make these printers work with my wireless HP Pavilion (laptop)?
Thanks

Which HP laptop and what version of Windows? I know Windows XP had usb to parallel drivers included natively. Vista and Windows 7 are tending to move away from support for "legacy" ports like serial and parallel. What port are you trying to install the printer on? I am using a usb to parallel adapter to an older parallel port printer together with a wired printer server with one usb port and it works fine with XP, Windows 7 and Mac OS 10.6 computers on my home network. I actually set up the printer on each machine through the print server, which appears as a network device. The print server plugs into the router with an RJ-45 cable.

Lion will not allow my Belkin USB hub to work

Since having upgraded to Lion, my Belkin USB no longer works. At start-up a get a message asking that install software for the Hub, but of ourse the software disc pre-dates Lion and there is nothing on the Belkin website to offer guidance.
Any ideas please?

Did you get it working? - I've got the same problem and no response from Belkin.... Edit: Just logged in and I did get a response and my question maked as "resolved".
Dear Belkin Customer,
Thank you for your response.
I regret to tell you that we do not have any available drivers for the Latest MAC Operating System 10.7.1. Since, the Belkin product F5L009 has become an Obsolete product. We once again regret for your inconvenience.
Should you have any further questions, please take a moment to review our Knowledge Base athttp://belkin.com/support or let us know.
Please ensure that in order to reply to this email, or access any attachments, you must follow the link shown above and click 'update' at the bottom of the email to be able to respond. Do not reply to [email protected] as we will not receive your email’
Thank you,
Ruth Peters
Technical Support Agent
Belkin Technical Support
So pretty useless.

USB data link to Belkin USB Printer Adapter

Similar Messages

Maybe you are looking for