USB device connected to port but I can't see device in My Computer
Was working ok, but now my Miix 2 8 isnt showing up in my computer listing nor in the device manager.
WiFi seems to be working ok.
How do I get windows 7 to see the Miix 2 8, same issue when I plug the Miix 2 into a second windows 7 computer, and when I plug in a dongle with an SD card it sees the card and will display the contents...
Puzzled....
Is the light source you have added an ambient light. Then you see the overall light. By selecting spot or point light you have a light source like lightbulb.
If the light source is under the grid you want see nothing. place it above the grid.
If you want send the motion file to me and i let it see you
Similar Messages
-
My daughter's iPod touch has been disabled by trying password too many times. When it is turned on"iPod is disabled connect to iTunes". But iTunes will not recognise iPod. It has never been backed up. I want to wipe it clean and restore it to factory setting. How do I do this when it can't be seen ?
Connect the iPod to your iTunes library in Recovery Mode using the instructions in this Apple support document.
http://support.apple.com/kb/HT1808
B-rock -
itunes no longer sees my devices. But I can still see them in windows. Please help
Try
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem -
Internet connection works but I can't see the base station
My internet connection is OK (I'm able to surf and get e-mail) but I can't see my base station on just one of my computers. It shows up in the others, so I don't think it's a problem with the AEBS. I've tried re-installing the Airport Utility software, repairing permissions, etc. but it just keeps saying it can find a base station. Any ideas?
OK, thanks for the clarification.
If you haven't already tried this, connecting an ethernet cable from your computer directly to one of the LAN ports on the base station will usually allow AirPort Utility to "see" the device.
You may need to restart the Extreme and your computer as part of the sequence.
And sometimes, the device will just "appear" after 10-15 minutes or so after a restart. I have no idea why this is. -
Hi I changed my pass code and can't remember it and now my phone is saying connect to iTunes but I can't get it to connect could you help pls
Hi
Have you tried different USB ports and different cables just to rule out all the variables?
See here for forgotton passcodes:
http://support.apple.com/kb/ht1212
Hope this helps -
My iphone 3gs will not connect to itunes and it says that I need to do a system restore. It also says that I need to enter my password on the iphone to connect to itunes but I can not do this because the phone is in emergency phone call mode only.
Turn your phone off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your phone and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a phone in recovery mode. Now you can restore to factory settings.
Unfortunately, the data on your phone is already gone if you're seeing the connect to iTunes logo. -
I already have an Apple ID account with 4 devices connected to it but I would like to make a new one with a desperate password for my school iPad. How do I do that?
You can create a new Apple ID and password for the iPad but none of the content downloaded using the Apple ID associated with the four devices will be available on the iPad.
Create new > Apple - My Apple ID
It's not possible to use two passwords with one Apple ID. -
My iPod touch bluetooth cannot discover my iPad nor mac air, but it can discover other devices... I don't understand why. My Mac and my iPad can't discover it, as well...
Thanks for this... I actually wanted to pair my iPad with my iPod touch so I can use the keynote remote app in my iPod touch to control my keynote presentations... I was able to control my presentations through wifi... I wanted to use the bluetooth since internet connection is quite slow.. The app tells me I can connect through bluetooth with my iPad but sadly, it can't... I've been trying to pair them but the can't discover each other... :(
-
When I connect my iphone to the laptop (windows) it makes a sound but i can't see it in itunes or "my computer' I have no idea why....
Setting up your phone "as new iphone" is covered in this article: http://support.apple.com/kb/HT4137
Before you connect to a new PC, make sure that autosync is disabled in Edit/Preferences/Devices, otherwise your phone will be wiped during the following sync.
If you have data on the phone you want to save, back up manually:
Disable autosync in iTunes, connect your phone to your new computer and right click on it in the device list and choose backup. iTunes will backup your phone without syncing. Transfer your purchases the same way, choosing "transfer purchases" this time.
When you connect your phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards. Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the phone for the first time.
Since changing your iTunes library will erase your phone again, do the same process when you change back to your normal PC.
About backups and what's saved:http://support.apple.com/kb/HT1766
How to back up and restore:http://support.apple.com/kb/HT1414
How to download apps for free again:http://support.apple.com/kb/HT2519 -
My iPod 5th generation are connected to itunes but i can't navigate in every buttons (apps, music, ...) What can i do ?
This means you will need to put the device into a Forced Recovery Mode in order to restore the device. You can do this by connecting the device to your computer, holding the Home & Power buttons together until the device restarts with an Apple Logo, once you see this logo pop up remove your finger from the Power Button continuing to hold down the Home Button. You should then see a prompt within iTunes stating that it has detected a Device in Recovery Mode. Proceed through the restore prompts and it should be ok to use again.
-
I am trying to transfer pictures and music from my phone to my computer, and when I connect my phone, it says Device not installed correctly. I can not see my files or nothing. What can I do?
Try downloading these http://www.samsung.com/us/support/owners/product/SCH-I535MBBVZW
or searching for it here Verizon Wireless Cell Phones - Verizon Wireless Accessories | Samsung -
iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB. I already tried uninstalling and reinstalling iTunes....still nothing. Any ideas?
Thank u verrrrrrrrrrry much FoxFifth u save my life thank u.
-
Can connect to appstore but not can't download songs or music albums
can connect to appstore but not can't download songs or music albums in mp3.
Sorry, but music tracks and other media contact are not available in Israel via an iTunes Store at this time. None of us here can say when Apple will be able to obtain the necessary licenses and feel it worthwhile to set up an iTunes Store for your country.
Regards. -
When I got my ipod I made an account with iTunes right from my ipod.Yesterday, I made a password lock to get into my ipod and I couldn't get into it even though I did the correct one. Now it says"connect to iTunes" BUT I can't because I never registered on the computer. I've tried holding the home and sleep/wake button for 10 sec and then only the home for 5sec and that might have reset it, but it didn't help. If any of you guys know what to do so I can unlock it I would appreciate it VERY much.
If you haven't done so install iTunes on your computer. http://www.apple.com/itunes/
Follow the instructions here: iPhone and iPod touch: Unable to update or restore -
I rented a movie (dark shadows) but I can not see it, because a message appear "Problem loading...try again later". Is not a problem connection. I tried a lot of times to watch the movie and I didn't can.
Thanks
CelesteI rented a movie (The Hobbit)...but it stops loading.
The movie costs CHF 7.50.
A phone call to the support team costs CHF 46.-- !!!!!
What do you think I will do?
Pisella Verde
Maybe you are looking for
-
Kernel panic since upgrade to core. Unable to mount root fs on
kernel panic : not syncing; VFS; Unable to mount root fs on unknown-block (0,0) I get that error since I upgraded archlinux to the latest version. The last time I upgraded before that was while the repos was still named current. Since I upgraded to c
-
Different 'mouse enter' event / 'set busy' vi behaviour in LV8?
In my program, I used the mouse curcor 'set busy' vi to lock the front panel during a measurement. However, I did want the 'cancel measurement' button to be available. I solved that by adding a 'mouse enter' and 'mouse leave' event for that button
-
I had NO problem with Home Sharing until I updated iTunes. INSTANTLY, Home Sharing quit. I have two AppleTV's, two computers running Win7 and iTunes. All have worked seamlesly until I updated iTunes last night. I have tried all of the Home Sharing tr
-
Creating pdf from scanner in 10.6.1
The one feature I loved in Acrobat was the ability to scan multiple pages directly into Acrobat as a single file by using the option "Create pdf from scanner." After upgrading to Snow Leopard, this feature still appears in the menu, but no scanners
-
Nikon in camera comment function. Not showing in Aperture
I can't find any reference to this question already having been asked/answered. So, sorry if it's a FAQ. I use Nikon D70s and D200 and import files into Aperture. No problems. Except, the in camera comment I have attached via the camera menu i.e. "20