USB device does not work after sleep

The problem in the following:
X230t in tablet mode,
connect to the USB port of the adapter USB to COM Port (ftdi232) all works fine,
but if not disconnect the adapter from the USB port and put the laptop into sleep (or hibernation) the following inclusion is not determined USB adapter (or other device) and does not work pen (stylus)
until you restart the laptop.
What to do?
How to fix it?
Please help, this is terribly annoying.

Thank you friend, I do not work and a stylus. Since he is also on usb!
Lenovo and for some reason does not want to fix it.

Similar Messages

HP SimplePass Reader Does not Work after Sleep

I have only had my laptop for a week - the fingerprint reader stopped working 2 days after I bought it. I have tried everything: removing and re-installing various drivers and software, stopping and starting Credentials Manager, unchecking the box that allows the computer to turn the reader off to save power, etc.
I have gotten it to the point where it functions when the computer is logged in, but not after sleep. It works once if you restart the computer, but after waking it from sleep it does not initialize. (no light or anything) However, if you "lock" the desktop from the start menu, the reader will log it in again. (without closing the lid or putting it to sleep)
Simple Pass version 6.0 (latest downloaded from HP.com)
Envy Dv6 7229wm
Windows 8 64-bit
Thanks

Hello hawvi,
I see that you are having problems with the fingerprint reader not working after returning from sleep mode. I would like to help with this issue but I need some information.
Can you provide the full model and product number of the computer? Here is a link that shows how to find that information.
What operating system are you using?
How long have you had the problem?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

USB headset does not work after upgrading to Yosemite

I upgraded MacBook Pro 13" retina to Yosemite and lost Logitech PC Headset 960 sound.
System preferences shows it in input and output, but no sound.
After I plug in and out headset I loose even internal sound for Spotify.
When headset is plugged in Youtube videos on Chrome stops playing, when I take them out - video resumes.
Hardware should be ok, because I have 2 pairs of such headset (both of them are not working) and the same hardware on Windows 7 (bootcamp) do work with headset perfectly.
Have anyone the same/similar problem. Does anyone has solution? Should I migrate back to Maverick and how to do it?
Already reset everything what was recommended to reset etc.

1. System Preferences > Sound> Sound Effects
Play sound effects through:
Select Logitech/headphone and then back to "Selected sound output device".
2.Launch iTunes and play a song through headphone and adjust the volume.

Sound does not work after sleep

I'm really tired of this problem. Have a MBP Retina running the most current OS 10.8.4. Every few days or so when I wake the system (after having lid closed for a while, and Chrome browser running) sound does not come back on. So, if I am using youtube I can't hear anything. Only solution I've found is to restart the computer, which of course I don't want to do with browser tabs open, etc. etc.
Isn't there a simple solution to this, before Apple finally figures out what causes this glitch?

Finder
Close all windows and quit all applications.
Click "Go" menu in the Finder menubar.
Select Computer, t hen Macintosh HD > Library > Preferences
Open "Audio" folder.
Right click these two files and select "Move to Trash".
com.apple.audio.DevicesSettings.plist
com.apple.audio.SystemSettings.plist
Close the windows. Restart the computer.

My sound device does not work after yesterdays update

after the last update my sound device is out of system.

Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.

FCP does not work after sleep - asking for quartz extreme card

Hi all,
Well my 2 x 2.266 Dual Core Intel xeon with 5 gig memory is getting a little long in the tooth and I have started coming up against what I suspect is hardware issues.
The OSX is 10.5.8
It has a blackmagic HD card as well as an ESATA rocketraid card.
I have a sohoraid attached as well as a Drobo (via firewire).
In the last couple of months I l've had a bunch of issues that I wonder if are at all related.
Firstly the DVD player app now freezes the whole computer if I try and start it.
when it first did this I spent forever rebuilding the system for it to only fall over again a month or so later.
2) In the last couple of weeks, when I wake from sleep the mouse icon is gone and what is in its place is a small area of distorted,broken pixels. Still works as a mouse (the distorted pixels move round like an arrow) and the arrow returns when I tab through to another application. Weird...
3) In that same time when I have started Final Cut Pro it immediately gives me a warning saying a quartz extreme video vard is required to run application and refuses to open. Restarting computer fixes this but this is a new development.
4) I ran into an issue at beginning of the year with my soho 5bay raid where it said a drive failed and then couldn't rebuild with a new drive, took it to shop and it blinked into life on their computer. Drive was never broken. Its now back and running as it should, like it always did, but they couldn't see what went wrong.
These of course could be a unrelated but I somehow suspect not.
Any first 'go-to's" you would recommend to just try and trouble shoot this?
THANK YOU!!!!

Try these in this order:
1. Set Mac to NEVER SLEEP. No exceptions.
2. Repair Permissions on all drives.
3. Trash Preferences for offending apps.
4. Wipe and re-install fresh OS and apps every 6-18 months.
Tim

External USB keyboard does not work with T60 after BIOS upgrade

External USB keyboard does not work properly with T60 after 2.26-1.07 BIOS upgrade.
It does the same with or without the docking station.
Anyone else bumped into this problem yet?
Has someone found any fixes for this?
t

Hi and welcome the forum!
Try uninstalling all USB hub devices from the device manager and reinstalling them again, particularly the keyboard's.
v2.26 is supposed to fix the issue according to lenovo:- http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-63024
Hope it helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Apple TV does not work after trying to update software. Main light keeps blinking and on the screen shows itunes icon and a usb cable. What does that means?

My Apple TV does not work after trying to install the new software update. The main light keeps blinking rapidly and on the screen it shows the itunes icon and a USB cable. What does that mean?

The Apple TV is in recovery mode. Try to restore the Apple TV. Follow the link for instructions on the restore process.
http://support.apple.com/kb/HT4367

External USB HD does not work with HAL:

External USB HD does not work with HAL:
From the last 10 days the HAL auto-mount with ntfs-3g file system of my external hard drive does not woks.
But the manual mount procedure with the command mount -t ntfs-3g /dev/sdb* /mnt/XYZ works.
I've followed the instructions in the wiki: http://wiki.archlinux.org/index.php/HAL and the system has worked up to the last kernel or HAL update.
My fat32 usb-stick works without any problem.
If I try to open the device with KDE it appears an error popup wit this message:
TODO: have to rethink extra options
Error: kio_media_mount_helper
The log from the kernel.log is
Nov 6 22:03:16 myhost usb 5-1: new high speed USB device using ehci_hcd and address 4
Nov 6 22:03:16 myhost usb 5-1: configuration #1 chosen from 1 choice
Nov 6 22:03:17 myhost Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov 6 22:03:17 myhost ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 6 22:03:17 myhost Initializing USB Mass Storage driver...
Nov 6 22:03:17 myhost scsi6 : SCSI emulation for USB Mass Storage devices
Nov 6 22:03:17 myhost usb-storage: device found at 4
Nov 6 22:03:17 myhost usb-storage: waiting for device to settle before scanning
Nov 6 22:03:17 myhost usbcore: registered new interface driver usb-storage
Nov 6 22:03:17 myhost USB Mass Storage support registered.
Nov 6 22:03:22 myhost scsi 6:0:0:0: Direct-Access WDC WD32 00JB-00KFA0 0811 PQ: 0 ANSI: 0
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sdb: sdb1
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Attached SCSI disk
Nov 6 22:03:22 myhost sd 6:0:0:0: Attached scsi generic sg2 type 0
Nov 6 22:03:22 myhost usb-storage: device scan complete
and the error.log is
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Do you have some idea ....
Bye.

I have done the following:
Downloaded the patched hal version.
used makepkg in /abs/local/trunk/ to create a pkg for pacman
used sudo pacman -U pkgname to install it.
used sudo nano /etc/hal/fdi/policy/preferences.fdi to create the fdi file with the following content:
saved the file and removed my ntfs entryes from fstab and rebooted. and still there is no automount off ntfs partitions.
have i done something wrong?
br fjodork
WARNING: what follows is a guide of what did work for me, I'm still in an early stage of learning linux, so please correct me if anything of what follows is wrong/dangerous/stupid. As I said, this worked for me, it's not pretty, since I was learning each step on the fly and I'm sure there are better ways to do this.
So fjodork, you seem to have done the the necessary steps, though i couldn't get it to work until i first removed hal without dependencies
pacman -Rd hal
it will give you some warning about the dependencies, ignore it since we are reinstalling hal in a few steps.
First i tried to follow Raymano's link, obviously it showed me nothing in the browser so I thought it might be a broken link.
So I downloaded the source tarball from here http://hal.freedesktop.org/releases/hal-0.5.10.tar.gz
unpacked it changed the /tools/hal-storage-mount.c as per Milfadoodle's instructions.
at first I tried to compile directly from source, the process would finish without a glitch though after reboot nothing changed, as if hal weren't
installed, i guess there were issues with paths. anyway read on
Then repacked the source in tarball, copied it to /var/abs/extra/system/hal and modified the PKGBUILD as follows
makedepends=('pkgconfig' 'gperf')
options=('!libtool')
install=hal.install
source=(${pkgname}-${pkgver}.tar.gz #removed url so makepkg looks in the current directory for the tarball
hal
hal-policy.patch
cryptsetup_location.patch
hal-0.5.9-hide-diagnostic.patch
ntfs3g-valid-options.patch)
md5sums=('6641c30a27c00485c6accac5110ff911' # replace with md5sum of your package's sourceball (run md5sum filename)
'882f67668cb14a0a9e4a27ef22278027'
'5ba8b610aa9763a5f42b9f7cbd7a86ad'
then makepkg (i had to add --asroot, don't ask why
and finally pacman -U hal-0.5.10-1-i686.pkg
another reboot and everything worked without a glitch!:D (yeah i know i still haven't got rid of the reboot mentality )
I have also put the policy files as per the wiki instructions.
PS: I know this is a dirty way to getting things done but as i said, I'm just starting
If anyone could comment/correct/explain this post I'd be more than happy, the automount issue was bothering me for about a month now (you'll say why do I need ntfs in the first place? well, I only recently switched for Linux as my primary OS, these are some relics of the M$ era

USB Port does not work W510

Hello all,
I am writing to you hoping that one of you may have an idea what's wrong with my beloved w510.
A few hours ago the usb port (on the back on the right side) where I plugged in my external mouse stopped working.
In the Lenovo part list it is referred to as "usb Sub card yellow".
It just does not recognize a mouse nor any usb stick or external drive. I have already reinstalled the usb controller
but it didn't make any difference. (I think the driver is only for the usb 3 hub on the left side of the notebook)
when I plug in the external drive the lights of the drive start "flashing" same for the usb stick, but they are not recognized as drives..Same for the mouse. The lights go on, but nothing else works.
Probably its all my fault, but I don't know what else I can try! Please excuse my bad English...!
Hoping that somebody might be able to help me...
Paul

I have a reproducible test for this issue on my W510.
1) Plug in a usb mouse into the rear usb port and ensure the mouse is working.
2) Hybernate the system.
3) Resume the system.
4) Confirmed the mouse does not work.
5) Disconnect and attach the mouse to one of the left usb ports and confirm the mouse works.
6) Disconnect and attach to the rear usb port and confirm the mouse does NOT work.
7) Restart the system and confirm the mouse still does NOT work.
8) Shut down the computer (a full shutdown, not standby or hybernate).
9) Power the system back on.
10) Confirm the mouse is now working in the rear port.
I can do these steps over and over with the same results regardless of whether the AC adapter is plugged in or not. It appears that the data connection does not work after the system is resumed from a sleeping state. I have the latest UltraNav driver and utility and the latest power management updates.
Oh, and one more test. Hybernate the system with nothing plugged in, then plug in a mouse into the rear usb port when the system is presently hybernated and then power the system back on. The mouse will not work and rebooting doesn't correct it. Only a full shutdown fixes it.

"F11 System Recovery" during boot does not work after Cloning hard drive.

Problem: “F11 System Recovery” during boot does not work after Cloning hard drive.
HP Envy m6-1125dx UEFI Notebook Computer with GPT hard drive.
Original Seagate Hard Disk GPT 700GB with Window 8.0_64 upgraded to Windows 8.1_64
Startup Menu (F11 System Menu works properly) only on original hard drive.
Following obtained from Disk Management & diskpart in Command Prompt.
GPT Disk <700GB>
Partition 1 WINRE NTFS Primary 235MB/400MB [Recovery]
Partition 2 EFI System FAT32 (LBA) Primary 108MB/260MB [System]
Partition 3 (NONE) Unformatted Primary 128MB/128MB [Reserve]
Partition 4 Main NTFS Primary 90GB/195GB [Primary “C”]
Partition 5 (NONE) NTFS Primary 372MB/450MB [Recovery]
Partition 6 Data NTFS Primary 7GB/475GB [Primary “E”]
Partition 7 NTFS Primary 26MB/350MB [Recovery]
Partition 8 Recovery NTFS Primary 24GB/26GB [Recovery “D”]
I have Cloned the original hard drive to a new HGST 1TB Hard Drive using four different methods (sector by sector):
Acronis True Image 2015
Acronis Backup for PC
AOMEI Backupper Professional
Macrium Reflect
Each time the cloning process completes successfully and has the same original partition arrangement. The computer works properly except when trying to use the “F11 System Menu” key during boot. It gives the following error message:
“Recovery
Your PC needs to be repaired
A required device isn’t connected or can’t be accessed.
Error code: 0xc0000225
You need to use the recovery tools on your installation media. If you don’t have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer. “
Any suggestions why the F11 System Recovery does not work during boot and how to fix the problem would be appreciated. I have does various disk checking and file checking on both the original and new hard drive with no errors.
Thank you in advanced.

Hi,
How did you clone the HDD ? One-for-one or different method ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

My camera does not work after I restored the system, how can I use it again?

My camera does not work after I restored the system, how can I use it again?
Thank you for your help!

Did try to restore "as new device" without using the backup after that?
Did you try to reset the phone by holding the sleep and home button until the Apple logo coes back again?

Apple USB keyboard does not work with one internal usb port

Hi everyone,
hope someone can help me to solve my problem. I have a MPB13 retina late 2013 since something like 3 months. I have additional screen (dell), usb wired keyboard (apple) and BT magic mouse.
Since a few days, my usb keyboard does not work well. It only want to work properly when plugged to the rights side usb port internal port and not anymore on the left one. It also work on a usb external concentrator. Before, I had no problem, it worked perfectly. There was no problem such as cofee on it...
After searching the web on such problem, I tries a few things such as:
I tried the keyboard on another computer (windows): works fine
I tried usb stick and external DVD reading on the left internal usb ports: works fine
I switch the MPB off and turn it back on: the usb keyboard still does not work on the left usb port
I tried the SMC and PRAM reset : nothing
Any idea ??
Thanks
Guillaume

I'm facing the same problem, found any solutions ?

My sound system does not work AFTER installing pc to tv wireless connection

my sound system does not work after installing hp pc to tv wireles device when I am using lap top for other purposes.

Hi,
You don’t install VS2010 on the client PC, then where did the Form Invoice not work? When you run it from another version of VS? Or when you run the application with application.exe?
Based on your description, one form works well, another form does not. I assume that two forms are in two different projects, then please check the .Net Framework used by the two projects. If they are different, you can use the
one used by the Form contact for Form Invoice.
Because this issue is a project issue, I recommend you to consult it on some application forum such as Windows Forms General forum for better support.
VS General Question forum mainly discusses
the usage of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
System and Visual Studio Editor.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

W520: Unable to boot from USB - device does not show up in boot menu

I have a W520, and I am trying to boot from a USB key. The USB key is bootable, my old T61p boots just fine from it, and so does another computer I tried.
The W520, after pressing F12 on power on, immediately shows the Intel PXE agent and then some blue boot menu, which only shows hard drive and LAN as available boot options.
I have tried all three USB ports but the results are always the same - the USB device does not show up. Is there any trick or BIOS setting to enable boot from USB?
Thanks,
CS

Hello Neil
Thanks for getting back to me
The issue was that the usb drives were disabled in the bios from the Startup menu.
To enable
1. Enter bios
2. Select boot
3. If you do not see the boot device you require use the down cursor key until the "Excluded from boot priority order" becomes visible.
4. Select the device you require (in my case USB HDD)
5. Save and exit.
You can now boot from a usb stick and install the Linux distro of your choice :-)
Cheers

USB device does not work after sleep

Similar Messages

Maybe you are looking for