USB Device Failed Detection

Hello,
I am trying to connect a USB to SATA/IDE Adapter to a USB port on Solaris 8. In the /var/adm/messages file, two messages show the following:
usba: /pci@1f,0/pci@1,1/usb@c,3 (ohci0): getting device status failed (-1)
usba: /pci@1f,0/pci@1,1/usb@c,3 (ohci0): connecting device on port 1 failed
It appears that the USB device is being detected but the OS doesn't know how to define it. Maybe a device driver might be needed?
Thx

Hello,
I am trying to connect a USB to SATA/IDE Adapter to a
USB port on Solaris 8. IIRC Solaris 8 only supports USB Keyboard and mouse. You'll probably need to get a newer version of Solaris.
alan

Similar Messages

Windows 7 64bit has an MTP USB Device Failed error message when I attach my Ipad1

I keep getting an MTP USB Device Failed error message when I plug in my USB cable into my Ipad1. Can someone help?

This is NOT resolved. The "Upper..."Key in the registry editor doesn't exist as you can see below in the image I am providing. This is still an OUTSTANDING issue, can someone please help with resolving this issue, super frustrating.
This is not just an iPAD issue, I get the same problem with my iPhone as well, both (iPhone and iPad) have the latest iOS 6.1.3 installed as well.

USB device failed, when I plug in iPhone 4S running windows 7 (64bit)

When I plug in my 4s it says USB device failed. In details it says that windows terminated the process (error 43) I tried telling it to use the apple mobile device driver, but that errors as well. I last synced this phone in June, with no issues. I have uninstalled and re installed iTunes. I'm scratching my head now. Any help is appreciated

Thanks alot mate, Sloved my problem

Mtp usb device failed error - iphone 3g - win 7 pro

I have iphone 3g. I use Win 7 pro OS. when i plug in iphone to usb port, i get error message as - device driver failed to install - in detail - mtp usb device failed..
In iTUNES i am able to view the iphone, sync my contacts with MS outlook etc..
kindly help
shansui

What a load of hogwash.
I've just had this error come up - WITH NO CHANGE OTHER THAN UPGRADE OF IPHONE 4 TO IOS 5.1.1.
(running iTunes 10.6.1.7 on 64 Win7)
Powered phone off, and back on again - same error... Haven't had to reinstall windows in a few years - maybe iTunes is now the least stable software in my collection - Might have to try the two (button) salute to Apple...
Error on device "MTP USB Device";
"This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)"

Help MTP usb device failed N97

When connected N97 via cable to pc ( windows 7 ) " MTP usb device failed" and cant see N97 in Pc suite. In mass storage mode work fine.
Please HELP.

Download ovi suite for n97 and your issue will be resolved.
When u connect ur n97 for the first time after installation make sure to press install on whatever the phone is being prompted to install. Oh and one more thing .. make sure you restart your phone and your pc before doing all this
Message Edited by agha_ali on 31-Jan-2010 11:11 AM

USB devices fail to mount

After installing 10.4.6 my USB devices fail to mount. No icons on desktop.
If I go to Apple menu/ Apple system Profiler/ more info/ USB, they show up OK with all correct information.
If I go to applications/ utilities/ disk utility, they do not show up so I can mount them. In fact, disk utility spins forever. Removing the USB devices, disk utlity works OK.
Another post suggested to reset-nvram, then reset-all. Things happened, but it did not help.
These worked fine before the update.
I have tried each device through a hub and directly to the computer. Still no good.
The devices are a Dazzle compact flash reader and a Nikon camera.
Any help would be appriciated.
G4 Mac OS X (10.4.6)
G4 Mac OS X (10.4.6)
G4 Mac OS X (10.4.6)

Have you tried plugging in the devices one at a time to see if the problem is with just one of them?
If so, you may need to contact the manufacturer & see if they say it is compatible with 10.4.6 as is, or may need a firmware update, which hopefully they can provide.
Note: when I Googled "Dazzle compact flash reader OS X" I got several hits suggesting at least one model with this description isn't very compatible with OS X, like this one.

HP Recovery usb device failed

have a new HP laptop:
HP ENVY 15t-j100 Select Edition CTO Notebook PC (ENERGY STAR)
Product Number: E9W31AV
Several hours after its first boot the laptop failed to load and I got a message saying it can't load win 8.1 os.
(this was two month ago and since then I am trying to recover it without any success).
HP US support sent me a recovery usb device with win 8.1
Before connecting it and starting the recovery:
1. I did a System Diagnostics. All Passed (memory & hard drive).
2. I reset the bios to default factory settings (and change the 'usb 3.0 configuration in pre-os to Auto, in case the usb is 2.0).
3. I connected the recovery usb directly (no hub).
I started the recovery...
I finished the "factory image recovery preparations" stage successfully:
I entered Skip and after that i removed the recovery usb device and continue the recovery by pressing "Continue":
After that the laptop boot and started "Software Installation" stage:
After several minutes it boot again and I got the following screen:
I saved the recovery logs to an external device and this it is saying:
[ 8:49:57.64] Failed to configure RAID0 + SRT
[ 8:49:57.65] Please check C:\System.sav\Logs\RSTPrep.log for more information
[ 8:50:53.50] ------------------------------------------------------------------------------------------
***CTO Error condition has been dtected in [Factory Update] phase !! ***
[ 8:50:53.50] Suggest to create PIN-log and send to TWN PDC NB-PreinPM for further analysis ...
[ 8:50:53.50] ------------------------------------------------------------------------------------------
I opened the file ..\System.sav\Logs\RSTPrep.log and i can see the following error:
RST_BIT=[64]
Disk Controller and Driver's information
Name   : Intel(R) Mobile Express Chipset SATA RAID Controller
PNP    : PCI\VEN_8086&DEV_282A&SUBSYS_1967103C&REV_05\3&11583659&0&FA
Service: iaStorA
Driver : X:\windows\System32\drivers\iaStorA.sys
Version: 12.8.1.1000
Name   : Microsoft Storage Spaces Controller
PNP    : ROOT\SPACEPORT\0000
Service: spaceport
Driver : X:\windows\System32\drivers\spaceport.sys
Version: 6.3.9600.16384
---------- C:\HP\BIN\RSTONE.INI
iFFS=1
[ 8:49:57.32] RStone.ini shows iFFS=1.
[ 8:49:57.32] System supports mSATA/SSD.
[ 8:49:57.48] Get parameter from RST.ini...
[ 8:49:57.56] CACHE_SIZE=0
[ 8:49:57.56] RST_MODE=maximized
[ 8:49:57.56] Get m-SATA bus index...
[ 8:49:57.64] Could not find m-SATA bus...
[ 8:49:57.64] Failed to configure RAID0 + SRT
Here are the full logs on DropBox share:
https://dl.dropboxusercontent.com/u/30077049/HP%20Recovery%20Logs/HP_SSRD_LOG.CAB
I did everything "by the book", got the same errors 5 times for the above scenario and 5 other times for other bios config (enable\disable features).
What is the problem?
It is Hardware issue?
configuration issue?
Something related to UEFI \ RAID ?
Is it possibile to solve it myself?
Is there a tool i can use?
I am living outside the US and I don't have an option to send the laptop to HP lab in the US, but Only in my country - Israel.
The following are my BIOS config screen :
Thank You!

have a new HP laptop:
HP ENVY 15t-j100 Select Edition CTO Notebook PC (ENERGY STAR)
[photo removed because it contained product serial number]
Several hours after its first boot the laptop failed to load and I got a message saying it can't load win 8.1 os.
(this was two month ago and since then I am trying to recover it without any success).
HP US support sent me a recovery usb device with win 8.1
Before connecting it and starting the recovery:
1. I did a System Diagnostics. All Passed (memory & hard drive).
2. I reset the bios to default factory settings (and change the 'usb 3.0 configuration in pre-os to Auto, in case the usb is 2.0).
3. I connected the recovery usb directly (no hub).
I started the recovery...
I finished the "factory image recovery preparations" stage successfully:
I entered Skip and after that i removed the recovery usb device and continue the recovery by pressing "Continue":
After that the laptop boot and started "Software Installation" stage:
After several minutes it boot again and I got the following screen:
I saved the recovery logs to an external device and this it is saying:
[ 8:49:57.64] Failed to configure RAID0 + SRT
[ 8:49:57.65] Please check C:\System.sav\Logs\RSTPrep.log for more information
[ 8:50:53.50] ------------------------------------------------------------------------------------------
***CTO Error condition has been dtected in [Factory Update] phase !! ***
[ 8:50:53.50] Suggest to create PIN-log and send to TWN PDC NB-PreinPM for further analysis ...
[ 8:50:53.50] ------------------------------------------------------------------------------------------
I opened the file ..\System.sav\Logs\RSTPrep.log and i can see the following error:
RST_BIT=[64]
Disk Controller and Driver's information
Name   : Intel(R) Mobile Express Chipset SATA RAID Controller
PNP    : PCI\VEN_8086&DEV_282A&SUBSYS_1967103C&REV_05\3&11583659&0&FA
Service: iaStorA
Driver : X:\windows\System32\drivers\iaStorA.sys
Version: 12.8.1.1000
Name   : Microsoft Storage Spaces Controller
PNP    : ROOT\SPACEPORT\0000
Service: spaceport
Driver : X:\windows\System32\drivers\spaceport.sys
Version: 6.3.9600.16384
---------- C:\HP\BIN\RSTONE.INI
iFFS=1
[ 8:49:57.32] RStone.ini shows iFFS=1.
[ 8:49:57.32] System supports mSATA/SSD.
[ 8:49:57.48] Get parameter from RST.ini...
[ 8:49:57.56] CACHE_SIZE=0
[ 8:49:57.56] RST_MODE=maximized
[ 8:49:57.56] Get m-SATA bus index...
[ 8:49:57.64] Could not find m-SATA bus...
[ 8:49:57.64] Failed to configure RAID0 + SRT
Here are the full logs on DropBox share:
https://dl.dropboxusercontent.com/u/30077049/HP%20Recovery%20Logs/HP_SSRD_LOG.CAB
I did everything "by the book", got the same errors 5 times for the above scenario and 5 other times for other bios config (enable\disable features).
What is the problem?
It is Hardware issue?
configuration issue?
Something related to UEFI \ RAID ?
Is it possibile to solve it myself?
Is there a tool i can use?
I am living outside the US and I don't have an option to send the laptop to HP lab in the US, but Only in my country - Israel.
The following are my BIOS config screen :
Thank You!

USB devices not detected in VMware [SOLVED; Using Virtualbox instead]

I am running Arch as a host and XP on VMWare workstation 7. My primary purpose of installing XP on VMWare was to use my edit my Line6 POD (behaves as a usb sound card) and get my USB TV Tuner box to work. The big problem that I am facing is that VMWare is not detecting any USB device (not even my USB Hard Drive).
I have the usb controller installed.
Any suggestions?
Last edited by devadittya (2009-11-24 20:04:45)

I don't know vmware but with other virtual machines there is often a configuration option whether usb drives should be automatically mounted or not. Sometimes automounting also only works if the vm has the focus, i.e. is the active window.

NFS export external USB device fails

I am trying to NFS export a FAT32 formatted external USB device, which fails with the error:
/sbin/nfsd: Can't export /Volumes/<external>: Operation not supported (45)
I am able to export internal/HFS drives, which have the "Owners Enabled: Yes" attribute, and therefore assume I need to set the flag accordingly on my external drive.
Despite the fact that the device has been assigned a uuid (it appears to be in place in .fseventsd and running 'repair disk' echos it in syslog), I get this error when running vsdbutil:
vsdbutil: Couldn't update volume information for '/Volumes/<external>/': Invalid argument
vsdbutil: no valid volume UUID found on '/Volumes/<external>/': Invalid argument
And diskutil returns this:
Permissions are not enabled on the disk (-9973)
I attempted to add the uuid to /var/db/volinfo.database in order to set the permissions there, to no effect.
I don't believe that I am the only person who has attempted this, but I can find no evidence to the contrary. Thank you.

NFS exporting requires specific NFS serving support from the file system.
Unfortunately, the "msdos" file system implementation doesn't currently
support NFS exporting.
If you'd like that support added, I would strongly encourage filing a
bug report/enhancement request with Apple:
http://developer.apple.com/bugreporter/
HTH
--macko

Various USB devices failing

I've just received a Hexacore MacPro (2013 style), but am having problems with some USB devices.
I can see a lot of chatter on this, but not relating to my specific problems.
The two devices I have which are consistently failing, are a Virus Ti and a Steinberg eLicenser dongle for Cubase.
I've tried various combinations of connecting these devices both directly and via a Belkin 4 port USB2 hub (supposedly MTT enabled).
The cubase dongle throws various different errors, but all relating to no connection. Sometimes it works for a period, but then fails again.
The Virus mostly doesn't work, but when it does, there's a lot of digital noise.
Both devices work perfectly on my 2011 MacBook Pro, which has native USB2 ports.
Other USB devices seem to be working OK.
It seems that either there's a failing in Apple's USB drivers for USB3 on MacPro, or maybe Apple has started using a new USB chip?
Does anyone have any thoughts on this one? I bought this specifically for music production, but am hitting a dead-end.

Hi. Yes, I have support tickets open with both.
I'm seeing various web pages which mention hacking the system to force old USB drivers as a fix. I'm not on my own with this issue.
By the way, both those devices are USB1 (12mb).
That sounds somewhat drastic though.

USB Devices Not Detected and High CPU Usage

Hello, I'm using arch on a Dell 1720 laptop.
I have some weird issues involving detection of USB devices.
When the laptop is on battery and I plug in a USB mouse the power flickers on and flickers off again; nothing in the logs/dmesg.
If I then connect the AC adapter the reconnect the mouse, the same happens, except the CPU usage hits 87%+ on one core.
Running
sudo rmmod ehci_hcd
solves the problem; the CPU usage drops and the mouse gets detected.
Subsequent attempts to hotplug USB devices does nothing, no high CPU and no Power.
Rebooting the computer is the only way to use USB devices at the moment.
usb-autosuspend is disabled in laptop-mode.
uname -a:
Linux MatSalleh 2.6.39-ck #1 SMP PREEMPT Sun Jun 5 18:30:30 EDT 2011 x86_64 Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz GenuineIntel GNU/Linux
The same happens with the stock kernel too
My kernel line in grub:
kernel /vmlinuz26-ck root=/dev/sda3 elevator=bfq ro resume=/dev/sda2
Any ideas?
Thanks,
Chris.

lilsirecho wrote:Perhaps the USB connector is damaged, causing excess power drain suggesting that the current limiter isn't functioning.
I highly doubt it's that, it was working fine on ubuntu just days before...
tydell wrote:I had similar problem with USB pendrive, it wasn't detected and it makes high cpu usage. It was problem with ehci_hcd module
This one helps me to solve this problem
My USB devices don't even get detected, so that script won't work.
Last night I hibernated my computer after not using any USB devices, on resume, my CPU usage was 100%, removing the ehci_hcd module fixed it.
Any more ideas?
I'm tempted to build a vanilla kernel...

KDE mount USB device fails

Hi,
I am running KDE and having problems mounting USB devices via the KDE Device Notifier in the task bar. When I insert the USB stick there is the normal little popup giving me the option to open the flash drive in dolphin. When I click it, I get the following error:
"Could not mount the following device"
Mounting the device via terminal works fine. I also put my user into the "storage" group like the wiki tells me. Still no change.
Any ideas?

willtriv wrote:
Note: slim is ConsoleKit capable since version 1.3.3. Unless you happen to run an old version, you must no longer include ck-launch-session in your .xinitrc or slim.conf login_cmd.
These kind of changes without notifications to users cause headaches. Someone was kind enough to update the wiki!
You are my personal hero for today, I was suffering the same problem. Manifests itself as 2 CK sessions listed by ck-launch-session, with the wrong session being marked as active.
Last edited by crobe2 (2012-06-11 14:28:12)

Mtp usb device failed

failed to recognise my lumia 830.on my pc.I use windows 7 .No lumia boot mgr.finally says driver installation failed.help please.I bought my phone yesterday

Hi, ray008. In addition to what farby said, you can also check this link: http://www.microsoft.com/en-us/mobile/support/faq/?action=singleTopic&topic=FA141649. The link will work regardless of your location. Make sure that you are using the USB cable that came with the phone. Also, try connecting it to a different port. Keep us posted.

TS1538 MTP USB device failed

My laptop cant installed automatic install usg software for iphone4S MTP and some other base syetems Device are saying no driver found.
pls find for me soliution .
thanks

You may have to reinstall the drivers,
Make sure you have an active data connection
Plug in the phone
Hit WINDOWS+PAUSE/BREAK
Select device manager (top left)
Find the device, it will probably have a yellow triangle with exclamation or question mark
Right click the device and select uninstall, opt to remove files if asked
Unplug the phone and re-attach
make _sure_ driver install completes and do not remove again unless you are certain it has
Should be fine now
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

IPad2 on Windows 7 : MTP USB Device = This device cannot start. (Code 10)

Hi Guys,
I want to access to the Internal Storage of my iPad 2 on Windows 7.
But I have an error with the MTP USB Device => This device cannot start. (Code 10)
So I cannot see my iPad in Windows Explorer.
I tried many actions from Forums :
update the driver to the "Apple Mobile Device USB Driver" located in "C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers"
delete the upper and lower filters in REGEDIT : {36FC9E60-C465-11CF-8056-444553540000}.
stop and restart the service "Apple Mobile Device"
But as soon as I connect again the iPad there is the same error message after Installing device driver software => "Device driver software was not successfully installed" : MTP USB Device : Fail
Is there someone who get the solution ?
Thank you for you help
Stephane

I have a similar problem, only mine is Code 31 for the MTP USB Driver. The Apple driver loads fine, and I'm able to sync with iTunes, but I can't connect to the device as a drive and copy the photos off of it.
I've tried nearly everything at this point that has been suggested in other threads, and nothing has seemed to work.

USB Device Failed Detection

Similar Messages

Maybe you are looking for