Usb device no mount

My Garmin GPS will not mount. The usb cable is data rated and worked fine a year ago with system 10.6 . Following the discussion groups I have zapped the PR, reset the SMC, repaired permissions, repaired disk (no defects found), created a second user account, did command R at startup. Disk Utility can see something that is the right size, but it is grayed out.
Garmin has not come up with anything useful.
Any suggestions?

The usb cable is data rated and worked fine a year ago
not sure what being data rated imply for an usb cable but the fact that it worked a year ago dont matter anymore then my car used to work a year ago too but that don't mean it does now
so my first test would be to change the cable then I
would try to connect the gps with another computer to see if it act up in the same way

Similar Messages

USB devices not mounting in one port?

I have two late 2007 MacBooks, neither of which reliably mounts a USB device plugged into the port closest to the firewire port on the left side. These two MacBooks were purchased within a week of each other about four months ago. I have returned one of them for factory repair of this problem. This was actually the second repair, since a few weeks previous the mainboard failed catastrophically.
The repair consisted of replacing the hard drive. The tech ("genius") at my local Apple store said it had been a software problem. I reinstalled each software package while testing for the problem to re-emerge, and it seemed to happen when I installed Skype for Mac 2.7.0.330. This may have been coincidental, since the problem doesn't occur when Skype isn't running, and the other MacBook doesn't have Skype installed on it at all. If I cold restart this Macbook, a USB device in the port in question will mount.
Has anyone experienced anything like this? Any tips will be appreciated!

I found this article whilst researching which external drive to buy to use with my powerbook and a future macbook purchase: All USB ports aren’t created equal
Could this be the cause of the problem - specifically that the problem port is not supplying enough power to your external drive because it's also powering the iSight etc?
Regards, Andrew.

A thousand USB questions .. later why do USB devices not mount/stop working

I know this is loaded post but I'm getting really torqued at the USB sub-system in OS X.
I bought a mini ~2 years to see what the OSX scene was like, so far it's mostly been a great OS but the USB problems past at work, on my home system only cropped up in the past few months is very frustrating. :-P
I've done the googling, apples pathetic troubleshooting pages, run the Profiler and USB Prober trying to determine all with no luck.
Can any of you help me "get it"?
At work, we had a OSX server a few years that failed to stop mounting a USB drive that had been used several time before. It was under support and Apple failed to resolve the problem!!
I had a Transcend usb enclosure that worked in 10.3 and by the time 10.4 rolled around it stopped working (checked on a few different macs)
Now I have a iogear gfr280 memory card reader/writer that worked three months ago and just tried to use it the other day ... borked!!. I then take it to work plug it into my co-workers iMac running 10.5, mounts up and I can copy my photos off the SD card, no issues. WTH!?
Also, just the other day my digital camera powershot A630 batteries ran out right as I was importing... Took me three hours of reboots, plugging in my thumb drive and camera only to have them show up for a split second then disappear from iphoto or the desktop.
I even thought of calling Apple on this one but I'm leary based on prior experience with the server incident.
This is even worse than under Linux(run that too), most times the kernel either supports the device or it doesn't ( I can live with that! ). None of this .. I'm gonna work and then all the sudden stop one day.
Anyone? Would it be worth paying for a one-time support call?

Try things in this USB faq.
DALE

[SOLVED]mounting cdrom and usb devices doesn't work

Hello,
i have trouble mounting my usb devices. automount doesn't work and i can't mount them manually even as a superuser. here's the output of mount command:
mount: wrong fs type, bad option, bad superblock on /dev/sdc,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
i can mount cdrom manually but i can't do the same for my usb stick and external hard drives. it always complains about the above regardless of the filesystem. my devices are working under windows and other linuxes so i know hardware is not the problem.
i'm using lxde with pcmanfm.
if you need any other files just ask.
thanks
Last edited by the gray (2009-03-16 20:15:18)

above was the error when i tried to mount any usb device with "mount -t <type> /dev/sdc /media/mountpoint". and i couldn't mount any usb device as root from console. when i tried to mount devices using pcmanfm it just popped some empty dialogs and i couldn't find any mention of "IsCallerPriviliged failed" error so i (wrongly) presumed it wasn't that. i did try some of the other fixes mentioned in the forum with no success. but adding exec ck-launch-session startkde to my .xinitrc fixed the issue
thanks again
Last edited by the gray (2009-03-16 20:17:53)

USB flash storage mounted as read-only filesystem

Hello all,
I'm new to Arch Linux and trying to migrate all my works to arch. Installed KDE, GNOME3, and hardware drivers successfully But I have problems with USB flash disks. When plugging a usb device, system mounts it as a readonly filesystem. so I can't change its contents. It always happens to my flash disk, but flash disk of my friend is ok!
I tried to mount manually with super user access, but no hope. It says:
[root@myhost soroush]# mount /dev/sdb1 /mnt/
mount: warning: /mnt/ seems to be mounted read-only.

roygbiv wrote:Maybe you can post your /etc/fstab?
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
tmpfs /tmp tmpfs nodev,nosuid 0 0
/dev/sda2 / ext4 defaults 0 1
/dev/sda3 /home ext4 defaults 0 1
/dev/sda4 swap swap defaults 0 0

How to blacklist a usb device in BSD?

I am having trouble communicating with a usb device while running Virtualbox on my iMac (Lion). Virtualbox is virtualization software which lets me run Windows XP as a guest OS. I am trying to run Palm Desktop for Windows on the virtual computer and I have trouble getting the USB connected Palm device to sync to the Windows application. It turns out the Palm device's use of the USB protocol is not quite conventional and so the virtual OS has trouble capturing it and presenting it to the Windows application.
Others who run Virtualbox under linux have seen this same problem with Palm devices and have found a workaround by disabling the host linux USB driver so that the Virtualbox application has unfettered access to it. This process is called "blacklisting" a USB device under linux, and involves editing the "/etc/modprobe.d/blacklist.conf" linux config file. My question is can I perform a similar operation in MacOS? The BSD I/O subsystem is different enough from linux to prevent me from knowing where to go in OSX to do a similar modification.

I'm having the same problem. I can't get OS X to ignore an SPI digital logic device (MCP2210) that I want to run from my Windows XP Virtual Box in order to control an experiment. Virtual Box sees it but it's grayed out under the list of USB devices to mount in Windows XP, and I don't know how to get the Max OS X to released/unmount/ignore/blacklist it.

Mac Pro no longer mounts external usb devices

Hi there,
Last week my mac pro stopped mounting my ipod shuffle as a disk (i was using it like a usb memory stick), i thought it was a problem with the shuffle and left it aside. But just yesterday the mac stopped mounting my external lacie 500gb disk. I had never had any problems before this.
I then tried both the shuffle and external hd on my powerbook g4. They work perfectly!
I then thought it might have been a problem with the usb ports on the mac pro - although all my other usb devices were still working - so i booted into xp with bootcamp, and the devices were recognised in xp perfectly.
After searching various threads on different forums the general idea for this problem seemed to be to reinstall osx, which i have just done, and no joy. Im still not able to mount either of these devices.
System profiler sees the devices, but thats it.
Also, i recently bought a new usb memory stick (as i thought the shuffle was dead), this mounts and works perfectly!
Anyone got any ideas?!
Thanks

Yes, i did the combo update immediatly after reinstalling osx and before pluggin in the usb device.
The problem developed just before the release of 10.4.9, so i dont think it was the update that did it.
I've only just got this MP back from Apple. The PSU had to be replaced. It took them nearly 3 weeks to do

USB Devices not being mounted

I have attempted to connect both my digital camera and iPhone, and neither have worked. Unfortunately, I can't find my camera lead, but I do have my phone. This is the output of journalctl:
May 14 20:11:34 anon kernel: usb 3-9: new high-speed USB device number 35 using xhci_hcd
May 14 20:11:34 anon kernel: usb 3-9: ep 0x2 - rounding interval to 8 microframes, ep desc says 10 microframes
May 14 20:11:34 anon kernel: usb 3-9: ep 0x81 - rounding interval to 8 microframes, ep desc says 10 microframes
May 14 20:11:34 anon mtp-probe[10722]: checking bus 3, device 35: "/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9"
May 14 20:11:34 anon mtp-probe[10722]: bus: 3, device: 35 was not an MTP device
May 14 20:11:34 anon baloo_file[814]: "/org/kde/solid/udev/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9"
May 14 20:11:34 anon baloo_file[814]: QObject::connect: Cannot connect (null)::accessibilityChanged(bool,QString) to Baloo::StorageDevices::slotAccessibilityChanged(bool,QString)
May 14 20:11:34 anon kdeinit5[748]: QObject::connect: invalid null parameter
May 14 20:11:34 anon systemd[1]: Cannot add dependency job for unit cups.socket, ignoring: Input/output error
May 14 20:11:34 anon systemd[1]: Started Socket daemon for the usbmux protocol used by Apple devices.
May 14 20:11:34 anon systemd[1]: Starting Socket daemon for the usbmux protocol used by Apple devices...
May 14 20:11:34 anon org.gtk.Private.GPhoto2VolumeMonitor[712]: (process:22878): GVFS-GPhoto2-WARNING **: device (null) has no BUSNUM property, ignoring
May 14 20:11:34 anon usbmuxd[10735]: [20:11:34.696][3] usbmuxd v1.1.0 starting up
May 14 20:11:34 anon usbmuxd[10735]: [20:11:34.697][3] Successfully dropped privileges to 'usbmux'
May 14 20:11:34 anon usbmuxd[10735]: [20:11:34.698][3] Could not get old configuration descriptor for device 3-35: -5
May 14 20:11:34 anon org.gtk.Private.GPhoto2VolumeMonitor[712]: (process:22878): GVFS-GPhoto2-WARNING **: device (null) has no BUSNUM property, ignoring
May 14 20:11:34 anon kernel: usb 3-9: ep 0x2 - rounding interval to 8 microframes, ep desc says 10 microframes
May 14 20:11:34 anon kernel: usb 3-9: ep 0x81 - rounding interval to 8 microframes, ep desc says 10 microframes
May 14 20:11:34 anon org.gtk.Private.GPhoto2VolumeMonitor[712]: (process:22878): GVFS-GPhoto2-WARNING **: device (null) has no BUSNUM property, ignoring
May 14 20:11:34 anon org.gtk.Private.GPhoto2VolumeMonitor[712]: (process:22878): GVFS-GPhoto2-WARNING **: device (null) has no BUSNUM property, ignoring
May 14 20:11:34 anon colord[402]: (colord:402): Cd-WARNING **: CdMain: failed to emit DeviceAdded: failed to register object: An object is already exported for the interface org.freedesktop.ColorManager.Device at /org/freedesktop/Co
May 14 20:11:34 anon colord[402]: (colord:402): Cd-WARNING **: CdMain: failed to emit DeviceAdded: failed to register object: An object is already exported for the interface org.freedesktop.ColorManager.Device at /org/freedesktop/Co
May 14 20:11:34 anon kernel: ipheth 3-9:4.2: Apple iPhone USB Ethernet device attached
May 14 20:11:34 anon kernel: ipheth 3-9:4.2 enp0s20u9c4i2: renamed from eth0
May 14 20:11:34 anon usbmuxd[10735]: [20:11:34.778][3] Connecting to new device on location 0x30023 as ID 1
May 14 20:11:34 anon usbmuxd[10735]: [20:11:34.778][3] Initialization complete
May 14 20:11:34 anon usbmuxd[10735]: [20:11:34.778][3] Enabled exit on SIGUSR1 if no devices are attached. Start a new instance with "--exit" to trigger.
May 14 20:11:34 anon usbmuxd[10735]: [20:11:34.779][3] Connected to v2.0 device 1 on location 0x30023 with serial number xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
May 14 20:11:34 anon baloo_file[814]: "/org/kde/solid/udev/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:4.2/net/enp0s20u9c4i2"
May 14 20:11:34 anon kdeinit5[748]: QObject::connect: invalid null parameter
May 14 20:11:34 anon baloo_file[814]: QObject::connect: Cannot connect (null)::accessibilityChanged(bool,QString) to Baloo::StorageDevices::slotAccessibilityChanged(bool,QString)
May 14 20:11:34 anon systemd-udevd[10739]: Assertion 'path' failed at src/login/logind-acl.c:72, function devnode_acl(). Aborting.
May 14 20:11:34 anon systemd-udevd[214]: worker [10739] terminated by signal 6 (Aborted)
May 14 20:11:34 anon systemd-udevd[214]: worker [10739] failed while handling '/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:4.2/net/enp0s20u9c4i2'
May 14 20:11:34 anon systemd-coredump[10745]: Process 10739 (systemd-udevd) of user 0 dumped core.
May 14 20:11:35 anon org.gtk.Private.AfcVolumeMonitor[712]: creating volume for device uuid 'xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx'

So, I can view the files on the iphone when using an "Open" dialog in a GTK app, but not in Qt or any other apps. I'm using Plasma 5 desktop, accessing files and mounting with Dolphin
lsblk doesn't change, it remains as:
sda 8:0 0 232.9G 0 disk
├─sda1 8:1 0 512M 0 part /boot
├─sda2 8:2 0 67.8G 0 part /
└─sda3 8:3 0 164.6G 0 part /home
sdb 8:16 0 2.7T 0 disk
├─sdb1 8:17 0 1.8T 0 part /run/media/anon/c66655000
├─sdb2 8:18 0 488.3G 0 part
└─sdb3 8:19 0 488.3G 0 part
sr0 11:0 1 1024M 0 rom
Last edited by joshy_15 (2015-05-15 09:49:00)

Issues mounting USB devices in Thunar under Openbox

Basically, whenever I attempt to mount a USB device in Thunar, I get a message that says:
Failed to mount "4.0 GB Filesystem
Not authorized
My .xinitrc looks like:
exec ck-launch-session dbus-launch openbox-session
It works when I use GDM to start openbox, but when I use slim, it fails no matter what I try. If anyone could help me out, I'd really appreciate it.

Check for *.pacnew files in '/etc/pam.d/' (specifically /etc/pam.d/slim.pacnew).

Mounting USB devices in arch guest

I'm new to virtualbox, but not to linux. I have been using arch for at least 3 years, so I have some familiarity with it. I have recently installed arch as a guest OS on virtualbox (on OSX host). I am having some trouble accessing an attached USB device from the arch guest. I have defined the virtualbox USB filter for my device, and it appears to work, detecting the identified device and attaching it to the guest (at least as far as virtualbox is concerned). I can see the device in the virtualbox pull-down menu, and it shows with a "checkmark" next to it, showing (I think) that it has been attached to my arch guest.
Problem is, I cannot see the device from the arch guest. no entry in /dev for any USB device. symptoms are the same whether i insert ther USB device before or after starting the arch guest. I have HAL and dbus active in my guest. Also, I have made this work in arch installed natively. since there is no /dev entry, this might appear to be some form of udev issue? is there a specific udev setup that I should be aware of for arch as a guest?
Please help if you can. I will appreciate all comments and suggestions.
-dvh

hey, ive got Arch setup in virtualbox as well, and can mount usb's and cd's etc. (although with some issues i may need to bring up in another thread...) anyways, im assuming you have the PUEL virtualbox and not the OSE one?
also, your certain that you've mounted the correct USB (on the Virtual Box pull-down menu)? because you may have mounted a USB which was already attached to your host, and not the actual USB?
just checking, i dont know much about how to fix this issue so im just going at the simple solutions...

Mounting usb devices as non-root user ??

How can a non-root user mount a usb flash device?
As root, the device is mounted as:
mount -F pcfs /dev/dsk/c1tod0s2:c /mnt
The vfstab entry for this is as follows:
/dev/dsk/c1t0d0s2:c /dev/rdsk/c1t0d0s2 /flash pcfs 2 no -
This is running Solaris 8 on a SunBlade150

Hello.
I had the same problem.
If you do not have root rights on the computer the answer is: You cannot mount the device.
I had root access and I wrote a C program that (un-)mounted all possible device files (the "s2" devices as well as the "s2:c" devices because some flash devices come without partition table).
I chowned the file to root and set the "set effective user ID" bit in the file's permissions using chmod after logging in as root - so any user can start the program.
I think this is the most flexible variant because USB devices sometimes are assigned other device names.
Martin

USB devices won't mount after upgrade to 10.6

Hello,
I recently upgraded to 10.6 and ever since my USB devices (flash drives, and external hard drives) will not mount when the computer is safe mode. The device show up in disk utility but are unmounted. When I press mount it says that the disc needs first aid, I perform the first aid and nothing changes. My computer is always in safe mode, the devices will mount in a normal boot but my computer is not stable in a normal boot. Also, it seems that iPods and cameras work fine.
Thanks for any help!

Well, the problem is that - as outlined in one of the articles I linked to - some USB devices will not work in Safe Mode; that may have to do with the fact the Safe Mode is only meant to be a troubleshooting tool, not a regular way of booting up. Did you have the USB devices attached while upgrading to 10.6? That would also be a problem - I unplug everything except keyboard and mouse.And, did you repair permissions after the upgrade? If not, do it now.
And, the other problem is the fact that you wait 1 - 2 years before addressing the issue; when you had it in for the last repair and it still exhibited the same problems afterwards, you should would have taken it back, possibly with some screenshots, exact notes of how/when/error messages, etc. and insisted on having it fixed or replaced.
So, I'd run the Apple Hardware Test (after you make sure that you have a complete backup) - instructions here:
http://support.apple.com/kb/HT1509
Report back with whatever messages you wind up with.

[solved] Permissions issue - can't mount usb device as user, just root

In my last post I learned how to mount a secondary HDD from the command line. Problem is I did it as root. Now I have xfce4 running and I need mount permissions as user.
Here's my fstab:
[dennis@archlinux media]$ cat /etc/fstab
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
devpts /dev/pts devpts defaults 0 0
shm /dev/shm tmpfs nodev,nosuid 0 0
#/dev/cdrom /media/cd auto ro,user,noauto,unhide 0 0
#/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0
#/dev/fd0 /media/fl auto user,noauto 0 0
/dev/sdb /media/disk0 ext4 rw,user,noauto 0 0
/dev/sdb1 /media/disk1 ext4 rw,user,noauto 0 0
/dev/sdb3 /media/disk3 ext4 rw.user,noauto 0 0
UUID=1f813152-615e-41a1-b3e7-ce2b5b6836a5 / ext4 defaults 0 1
UUID=aba18f0f-5f37-4ab0-8241-5a271dc3dddb swap swap defaults 0 0
UUID=c4332450-df9e-4571-8256-8e1b10b4d162 /home ext4 defaults 0 1
UUID=f0a6eca0-9668-454b-b444-371566663510 /boot ext2 defaults 0 1
[dennis@archlinux media]$
....and these are the system messages I got when I plugged the device:
Unable to mount "74G Volume":
mount: only root can mount /dev/sdb3 on /media/disk3
Unable to mount "4G Volume":
mount: must be superuser to use mount
What do I do here?
Last edited by dennola4 (2010-06-28 00:56:51)

Karol:
# Cmnd alias specification
# Defaults specification
# Runas alias specification
# User privilege specification
root ALL=(ALL) ALL
dennis ALL=(ALL) ALL
%users ALL=(ALL) NOPASSWD: /usr/sbin/pppd
%users ALL=(ALL) NOPASSWD: /usr/sbin/hibernate
%users ALL=(ALL) NOPASSWD: /usr/sbin/standby
# Uncomment to allow people in group wheel to run all commands
%wheel ALL=(ALL) ALL
# Same thing without a password
%wheel ALL=(ALL) NOPASSWD: ALL
# Samples
# %users ALL=/sbin/mount /cdrom,/sbin/umount /cdrom
# %users localhost=/sbin/shutdown -h now
Mr. Elendig:
Why not use automounting instead?
To install Arch packages I needed an Internet connection, which required use of a Sierra Wireless card, which required chatscripts stored on another filesystem. In my first Arch forum post ever, the one preceding this one, I learned to mount a device by creating a mountpoint in /media then invoking #mount. After installing all packages and creating a user name, I signed on with xfce4 and plugged in the usb device again. It didn't mount. So I did it manually using sudo. Since that worked I had the idea that adding the mountpoints to /etc/fstab would be useful, so I did. When that didn't work I decided to just ask for help.
So sure, I'm down for some automounting action. How do I do it?

Problems mounting a Camera as USB device [RESOLVED]

Usually, when I plug in my Canon PowerShot Pro 1 to my Archlinux laptop, I get an icon appearing on my desktop. I just double click on this icon and Nautilus opens up showing the individual photos.
However, I've recently invoked pacman -Syu and now I find there is no such icon registering.
dmesg | tail gives:
[n00b@thinkpad ~]$ dmesg | tail
[drm] Setting GART location based on new memory map
[drm] writeback test succeeded in 1 usecs
usb 2-1: new full speed USB device using uhci_hcd and address 5
usb 2-1: configuration #1 chosen from 1 choice
usb 2-1: USB disconnect, address 5
usb 2-1: new full speed USB device using uhci_hcd and address 6
usb 2-1: configuration #1 chosen from 1 choice
usb 2-1: USB disconnect, address 6
usb 2-1: new full speed USB device using uhci_hcd and address 7
usb 2-1: configuration #1 chosen from 1 choice
How do I mount the camera?
Last edited by Shagbag (2007-10-10 19:48:22)

Thanks for the suggestions guys but neither worked. Pudge, I was already part of the camera group. Logging out and logging back in didn't fix it. Interestingly, when I followed rayjgu3's suggestion I can't see any block device in /dev being created when I plug the camera in. That suggests to me that this is the problem: no creation of a block device even though the device is recognised by the kernel (result from dmesg | tail).
I'm out of my depth here. Why would the kernel recognise the device but fail to create a block device for it?
Last edited by Shagbag (2007-10-09 06:15:24)

Can't mount usb devices as a normal user

Hi.
I woud like to ask for help. I've been struggling with some "bug" that i came with Arch and usb devices (disks, pendrives). I can't mount it as a normal user using KDE default mounting software (Dolphin, for an exmample). I can mount it only in therminal by using sudo privileages. Is there a way to fix it? I read it, the same problem:
https://bbs.archlinux.org/viewtopic.php?id=180025
I tried to check everything according this topic, also with udisk2 archwiki thread but on my desktop machine i just can't mount usb devices without root password. This is how the error looks like for a Dolphin:
<Over sized Image removed. URL link preserved>
This is the error, from picture
Error when trying to use acces to "removable device 7,5GB". System showed: The requested operation has failed. Error checking authorization:
GDBus.Error:org.freedesktop.PolicyKit1.Error.Failed: action org.freedesktop.udisks2.filesystem-mount is not registered (polkit-error-quark, 0)
Could somebody help me? I even installed udisk mounting tool to mont without root password, added 50-udisks.policy and it just does not work.
Help.
I can mount it wit terminal by typing
sudo mount /dev/sdXY /mnt/usb
than i'm asked for password and it is mounted. Don't know why i can't mount it without password when connecting usb devices to usb port.
moderator edit [ewaller]Removed link to over sized image.. Note, you set up a click through thumbnail correctly, but the "Thumbnail" was the same image and was too large
Last edited by ewaller (2014-09-28 16:37:41)

Some refresh. I followed this topic:
https://bbs.archlinux.org/viewtopic.php?id=180025
with the same problem. I found errors here:
firekage@arch_desktop ~]$ journalctl -r -u polkit
-- Logs begin at pią 2014-06-13 18:04:12 CEST, end at czw 2014-12-25 20:15:01 CET. --
cze 23 15:59:15 arch_desktop polkitd[306]: Unregistered Authentication Agent for unix-session:c1 (system bus name :1.24, object path /org/kde/PolicyKit1/AuthenticationAgent, locale pl_PL.UTF-8) (disconnected from bus)
cze 23 15:29:59 arch_desktop polkitd[306]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.11 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 22:21:05 arch_desktop polkitd[306]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.11 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 22:21:03 arch_desktop polkitd[306]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.11 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 22:21:01 arch_desktop polkitd[306]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.11 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 22:21:00 arch_desktop polkitd[306]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.11 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 22:20:59 arch_desktop polkitd[306]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.11 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 22:20:58 arch_desktop polkitd[306]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.11 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 22:20:06 arch_desktop polkitd[306]: Registered Authentication Agent for unix-session:c1 (system bus name :1.24 [/usr/lib/kde4/libexec/polkit-kde-authentication-agent-1], object path /org/kde/PolicyKit1/AuthenticationAgent, locale pl_PL.UTF-8)
cze 20 22:19:49 arch_desktop systemd[1]: Started Authorization Manager.
cze 20 22:19:49 arch_desktop polkitd[306]: Acquired the name org.freedesktop.PolicyKit1 on the system bus
cze 20 22:19:49 arch_desktop polkitd[306]: Finished loading, compiling and executing 1 rules
cze 20 22:19:49 arch_desktop polkitd[306]: Loading rules from directory /usr/share/polkit-1/rules.d
cze 20 22:19:49 arch_desktop polkitd[306]: Loading rules from directory /etc/polkit-1/rules.d
cze 20 22:19:49 arch_desktop polkitd[306]: Started polkitd version 0.112
-- Reboot --
cze 20 22:15:10 arch_desktop systemd[1]: Stopping Authorization Manager...
cze 20 22:15:08 arch_desktop polkitd[304]: Unregistered Authentication Agent for unix-session:c1 (system bus name :1.23, object path /org/kde/PolicyKit1/AuthenticationAgent, locale pl_PL.UTF-8)
cze 20 22:02:59 arch_desktop polkitd[304]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.11 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 22:02:56 arch_desktop polkitd[304]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.11 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 22:02:55 arch_desktop polkitd[304]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.11 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 22:02:54 arch_desktop polkitd[304]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.11 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 22:02:53 arch_desktop polkitd[304]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.11 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 22:00:00 arch_desktop polkitd[304]: Registered Authentication Agent for unix-session:c1 (system bus name :1.23 [/usr/lib/kde4/libexec/polkit-kde-authentication-agent-1], object path /org/kde/PolicyKit1/AuthenticationAgent, locale pl_PL.UTF-8)
cze 20 21:59:26 arch_desktop systemd[1]: Started Authorization Manager.
cze 20 21:59:26 arch_desktop polkitd[304]: Acquired the name org.freedesktop.PolicyKit1 on the system bus
cze 20 21:59:26 arch_desktop polkitd[304]: Finished loading, compiling and executing 1 rules
cze 20 21:59:26 arch_desktop polkitd[304]: Loading rules from directory /usr/share/polkit-1/rules.d
cze 20 21:59:26 arch_desktop polkitd[304]: Loading rules from directory /etc/polkit-1/rules.d
cze 20 21:59:26 arch_desktop polkitd[304]: Started polkitd version 0.112
cze 20 21:59:26 arch_desktop systemd[1]: Starting Authorization Manager...
-- Reboot --
cze 20 21:58:39 arch_desktop systemd[1]: Stopped Authorization Manager.
cze 20 21:58:39 arch_desktop systemd[1]: Stopping Authorization Manager...
cze 20 21:55:01 arch_desktop polkitd[306]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 21:54:59 arch_desktop polkitd[306]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 21:54:58 arch_desktop polkitd[306]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 21:54:56 arch_desktop polkitd[306]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 21:54:56 arch_desktop polkitd[306]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 21:47:40 arch_desktop polkitd[306]: Registered Authentication Agent for unix-session:c1 (system bus name :1.21 [/usr/lib/kde4/libexec/polkit-kde-authentication-agent-1], object path /org/kde/PolicyKit1/AuthenticationAgent, locale pl_PL.UTF-8)
cze 20 21:47:22 arch_desktop systemd[1]: Started Authorization Manager.
cze 20 21:47:22 arch_desktop polkitd[306]: Acquired the name org.freedesktop.PolicyKit1 on the system bus
cze 20 21:47:22 arch_desktop polkitd[306]: Finished loading, compiling and executing 1 rules
cze 20 21:47:22 arch_desktop polkitd[306]: Loading rules from directory /usr/share/polkit-1/rules.d
cze 20 21:47:22 arch_desktop polkitd[306]: Loading rules from directory /etc/polkit-1/rules.d
cze 20 21:47:22 arch_desktop polkitd[306]: Started polkitd version 0.112
cze 20 21:47:22 arch_desktop systemd[1]: Starting Authorization Manager...
-- Reboot --
cze 20 19:56:46 arch_desktop systemd[1]: Stopping Authorization Manager...
cze 20 19:56:45 arch_desktop polkitd[310]: Unregistered Authentication Agent for unix-session:c1 (system bus name :1.21, object path /org/kde/PolicyKit1/AuthenticationAgent, locale pl_PL.UTF-8)
cze 20 19:55:51 arch_desktop polkitd[310]: Registered Authentication Agent for unix-session:c1 (system bus name :1.21 [/usr/lib/kde4/libexec/polkit-kde-authentication-agent-1], object path /org/kde/PolicyKit1/AuthenticationAgent, locale pl_PL.UTF-8)
cze 20 19:55:16 arch_desktop systemd[1]: Started Authorization Manager.
cze 20 19:55:16 arch_desktop polkitd[310]: Acquired the name org.freedesktop.PolicyKit1 on the system bus
cze 20 19:55:16 arch_desktop polkitd[310]: Finished loading, compiling and executing 1 rules
cze 20 19:55:16 arch_desktop polkitd[310]: Loading rules from directory /usr/share/polkit-1/rules.d
cze 20 19:55:16 arch_desktop polkitd[310]: Loading rules from directory /etc/polkit-1/rules.d
cze 20 19:55:16 arch_desktop polkitd[310]: Started polkitd version 0.112
cze 20 19:55:16 arch_desktop systemd[1]: Starting Authorization Manager...
-- Reboot --
cze 20 19:54:38 arch_desktop systemd[1]: Stopping Authorization Manager...
cze 20 19:54:13 arch_desktop polkitd[305]: Unregistered Authentication Agent for unix-session:c1 (system bus name :1.21, object path /org/kde/PolicyKit1/AuthenticationAgent, locale pl_PL.UTF-8)
cze 20 16:47:01 arch_desktop polkitd[305]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 03:02:19 arch_desktop polkitd[305]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 19 21:32:38 arch_desktop polkitd[305]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 19 19:25:08 arch_desktop polkitd[305]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 19 19:24:40 arch_desktop polkitd[305]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 19 19:24:38 arch_desktop polkitd[305]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 19 19:24:36 arch_desktop polkitd[305]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 19 19:24:35 arch_desktop polkitd[305]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 19 19:24:34 arch_desktop polkitd[305]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
Could somebody help me? I even checked all rules in /etc/polkit-1/rules.d and /usr/share/polkit-1/actions on my notebook, and all files are the same with the same user permission but on notebook i can mount usb without problem, but on my desktop can't at all.

Usb device no mount

Similar Messages

Maybe you are looking for