USB device not recognize & cannot recharge ipad

Hi all,,
I have a problem in the Recharging iPad, my iPad has fall and hit in the right corner near usb cable Entrance of adapter power, and now I cannot recharge it, And not identified by connect to the computer (USB device not recognize).
The only way to charge iPad by connecting power adaptor charger to ipad and turn completely off.
please help me to solve my problem.
Thank you.

I am having the same issue. iTunes 10.2.1 (1) will not recognize my iPad (4.3.1) and when I plug it into the wall charger (10W) it oddly enough says Not Charging although it really is being charged. How much slower or faster than normal is hard to say.
I know there is no issue with my computer as my other iPad works as does my iPhone. I even tried to connect my "broken" iPad to my macbook pro iTunes and still no joy.
I am 3 days away from my 1 year purchase anniversary and need to travel on Sunday.
This ***** bad. But I have no choice probably to take it in to get serviced and may be forced to fork out more $$ for an extended warranty plan. Thanks Apple....

Similar Messages

T400 "USB device not recognizable" pop up

Hello,
on my T400 a pop up appears every 5 seconds with the following message "USB device not recognizable ... etc".
But I don't have any device connected to my Laptop.
What could the problem be?
Tks

Hello grecoluca, welcome to Lenovo forum!
please check all usb connectors in your T400 sometimes the inner small metal latches are twisted and cause some annoying issues.
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

Zen Micro "USB Device Not Recogniz

Hi, I can tell from the forum that this has been discussed quite extensi'vely already but I thought I would check that I have done everything possible.
Basically, I have today received my Zen Micro, installed the software and then connected it to my computer and all I get is USB device not recognized.
I have uninstalled and re-installed the software, tried a different USB cable and socket, formatted and cleaned up the player and still nothing.
There is no other computer for me to test it on. Any suggestions?

Either a new USB cable or more likely a new PCI USB2 card. Chances are the USB card is faulty, but I can't emphasise enough how testing on another PC will clear up where the fault lies. All you need is a PC to test, whether it be a friends, other family member etc.
Also don't forget to search on "communication problem" in the FAQ post, and follow the link that takes you to for lots of troubleshooting advice.

USB Device Not Recognize When I connect.

Can someone help me?
When i connect my ipod touch 2G on 4.1 it said that my computer cant't recognized the device and won't let me charge it on the computer and on the wall input. I don't know what is wrong.

Nevermind, I figure out that the wire was mess up.

"USB device not recognize"

When i'm connecting my ipod there is that message.

Nevermind, I figure out that the wire was mess up.

Usb device not reconised ipad

im having truble with my ipad. when i concect it to my laptop it comes up with usb device not reconised

Assuming you mean the message is from the Windows machine, I have had that problem frequently from my Vista PC laptop. Only solution has been to move the connection to a different USB port, unplug-replug several times until the machine gets the point and decides to recognize the device. That has been my experience especially using a compact memory card reader to transfer digital camera files.
Also, make sure you are using the latest version of iTunes...with that the connection, for me, has been pretty good.

My ipad is not connecting the computer when i plug in, USB device not recognized pops up. I uninstalled and reinstalled itunes without any improvement.

I cannot get my ipad to sync with the computer, the message USB device not recognized keeps popping up. I've uninstalled and reinstalled itunes without an improvement.

Do you have firewall or anti-virus software running? If you do, it helps to turn it off. Otherwise, click on this link and see if it helps: http://www.apple.com/support/ipad/assistant/itunes/

My computer no longer recognizes my 7th Gen iPod Nano. "USB Device not recognized." What can I do to fix this?

Hi!
So here's what happened: My nano has been working just fine. I plugged it in this morning to my computer, and it automatically turned on, but instead of charging, it went to play music. I turned it off. However, it did not switch to charging mode. So I unplugged it, and then I plugged it back in. "USB Device not recognized." My iPod won't turn on anymore, and my computer simply does not recognize the nano.
It may have gotten slightly damp yesterday as it rained a bit when I was walking home (though I kept it covered). When I got home, it proceeded to work for another two hours after that--then I turned it off. And this morning? It doesn't work, as described above.

Try cleaning the connector on the bottom of the phone. Use a magnifying glass to see what is stuck inside, a dry toothbrush and/or wood or plastic toothpicks (nothing metal). If that doesn't resolve the problem your phone is broken.

Windows won't recognize my iPod - USB device not recognized

This is really frustrating. So I got a 4gb iPod nano on Saturday, took it home, set it up and everything was going just fine, no worry's. About 4 hours later I went to adjust my songs and it would not come up in iTunes. A little pop-up box said that the "USB device not recognized - one of the USB devices attached to this computer has malfunctioned and windows does not recognize it." After owning my iPod for less than an afternoon, I now have an ipod that I can do nothing to including change the music, charge it, etc. It works normally otherwise, it just won't connect to my computer. I then plugged in my older 256mb usb stick, and the same message, it too does not get recognized by windows. So I then tried a brand new 1gb usb stick that I had and the same result, not recognized by windows. I updated my itunes to the latest one after purchasing my ipod (version 7.4.3.1) and have looked up everything that I can and tried everything I saw to try, but nothing, absolutely nothing, worked. However my usb mouse, usb joystick, and usb printer all still work, but my moniter that has four usb outlets on it causes the same message, if I plug in the cable that connects one usb on my computer to the four on my moniter, windows can not recognize it. When I look in my device manager at the "unknown device" under the usb controller list it says that there is not driver for it, however I know that the drivers are either on my computer or built into windows. Any help? Anybody have an idea about what to do? Is it something in my windows registry has changed because of the new itunes, etc.?

Now that I've had some sleep, I realise I didn't really provide information that may lead to some specific help. Here goes - when I first plugged in the ipod nano (8gb), It displayed the screen it was supposed to - I could see the lightning bolt through the battery icon and knew it was charging. The icon for the ipod also appeared in the left-hand listing in itunes (in the section that existed under Library, before the sections Store and Playlists). This section now does not appear (I can't remember the title of this section, but it might have been 'devices'). In fact, I'm pretty sure this problem started when I clicked on this icon - nothing happened and it disappeared - so did the display on the ipod, which is not just the apple. This means itunes has only Library, Store and Playlist in the left-hand colunm. While I accept that computers do not work on normal logic, this seems to me to indicate that the drivers are fine, the system is fine, my laptop is fine - its the ipod or the usb cord. This morning as I tried again, this time my laptop gave me the option to 'click on the balloon to solve the problem' - let me quote: "One of the USB devices attached to this computer has malfunctioned, and Windows does not recognise it. Try reconnecting the device. If Windows still does not recognise it, replace the device". Come on folks - one of you will surely know how to fix this (short of me taking the ipod back to the store to get my money back).

USB Device Not Recognized - USB device attached has malfunctioned & Windows does not recognize it

I have an HP Pavilion dv4 Notebook running Windows 7 Home Premium and the USB ports worked fine for an HP deskjet printer and an older Casio digital camera. Then one day, the laptop decided not to recognize the Casio digital camera and gave the error message "USB Device Not Recognized" and also indicated that the device attached to the computer has malfunctioned. This prompted me to buy a new Canon digital camera. Well, a new camera did not fix the problem. Now, anything connected to either of the 2 USB ports will not be recognized by my laptop. Help! I'm at a loss to figure this out. I've tried the suggested Microsoft help below:
Suggestion 1: For the issue with USB devices, uninstall and re-install all the USB controllers. This lets the controllers recover the USB port from its unresponsive condition.
The USB controllers represent the USB ports in Device Manager.
a. Click Start, type device manager in the Start search box and hit Enter.
b. Expand Universal Serial Bus controllers.
Note: You might have to scroll down the list to find this item.
c. Right-click the first USB controller under Universal Serial Bus controllers, and then click Uninstall to remove it.
d. Repeat the above step for each USB controller that is listed under Universal Serial Bus controllers.
e. Restart the computer. After the computer starts, Windows will automatically scan for hardware changes and reinstall all the USB controllers that you uninstalled.
f. Check the USB device to see whether it is working.
This did not correct the problem. Then from device manager, I tried updating drivers on all the USB controllers and root hubs. While some may have received downloaded software updates, it still did not correct the USB device not recognized problem after restarting the computer. I'm hoping someone knows of the fix to this situation and can pass it along to me. Thanks for reading and posting any help.
This question was solved.
View Solution.

Hey 655micha,
I'm sorry you're having an issue with a USB device. Do you get an error window that pops up? If so what does it say? Have you checked Device Manager? Is is just one device that isn't working? Has it ever worked before? Is it just one USB port in particular that isn't recognizing devices?
What model do you have? Here are the steps to find your product number. FN + ESC is the easiest way to find that information.

I'm getting a message "USB Device Not Recognized" when I try to sync my iPad. What should I do?

I'm getting a message "USB Device Not Recognized" when I try to sync my iPad. What do I do?

Is the iPod Touch specifically stated as being compatible? Have you tried to perfrom a hard reset of the iPod with it still connected? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
B-rock

USB Device Not Recognized (PC doesn't recognize th...

My PC in which i am using XP, doesn't recognize the 5800 when i connect to USB place through Cable CA-101 i read all posts but there were just similar problems later in the process and by using Vista not XP, i already tried all downloads, cable drivers, and uninstalling and installings it says in some similar topics like in http://europe.nokia.com/nokia/0,8764,81914,00.html but nothing, i some how checked the cable for any cut, but logically, it seems to be ok, as it shows the message: USB Device Not Recognized as soon as i connect it in both ends (PC and Phone), then i checked in all connecting modes like PC Suite, Mass storage, etc. and the same, reset the phone, and same again, restart pc, restart the phone, even one tip on this page that says remove the PC from the cocket and press the On/Off buton 4-5 times to remove all the electricity that remains inside the mother board, nothing changed at all. please any one who can help would do great,
I Thank all of you in advance,
Regards,

I had the same problem. Solved by e-mailing nokia technical support.
There appears to be some conflict between the PC Suite and Nokia Updater Software on Windows XP. When I only installed the Nokia Software Updater on a separate machine without installing the PC Suite, my XpressMusic 5800 was recognised first time and the firmware update progressed without a hitch when before it was impossible.
All the necessary drivers are included on the Nokia Software Updater so you don't need to install any cable drivers separately. Also, the Connectivity Cable (CA-101D) that is included in the box is all you need to connect to the PC.
If you have already installed PC Suite, use the Uninstaller Software from nokia to remove the PC Suite software and then reinstall the Nokia Software Updater program.
Download Nokia PC Suite Cleaner 3:
http://europe.nokia.com/get-support-and-software/download-software/nokia-pc-suites/how-to/nokia-pc-s...
According to tech support, if the software update succeeds, you can then install the PC suite for other features.
Hope that helps.
ps
I have assumed you've checked that your USB port on the PC is working and that you have allowed the connection to PC Suite on your Xpress5800 when the "pop-up" screen appears on the phone when you first plug in the USB cable.
In my case, I could still sync with PC Suite but could not update my firmware as Nokia Software Updater keeps saying that the Xpress5800 was not recognised.
Message Edited by maspen on 21-May-2009 03:53 AM

IPad I: USB Device Not Recognized

My iPad is not recognized by my computer (USB Device Not Recognized) or iTunes. The cable works fine and all other iPods are recognized. I can't update my iPad or sync. I have tried uninstalling/reinstalling/verifying other components etc...everything that I can find recommended for this type of issue. Are there any other possible alternatives or could this be an inner component of the iPad that requires repair? Naturally, this occurred after the warranty expired. Any help will be appreciated.

Most USB ports n computers do not provide enough power to charge an iPad. You need to use the wall charger and plug that into a known good wall outlet.
The iPad will not show up on your computer like a hard drive. Start iTunes on your computer and plug your iPad into the USB port on the computer. You should see the iPad recognized in iTunes.

USB device not recognized win7 iPod Touch 1g

My computer will not recognize my 1st Gen Ipod Touch 8gb when I plug it into my USB port. I get a message USB Device Not Recognized. I've tried everything from resetting the iPod, uninstalling and reinstalling iTunes and all other Apple related programs, to fiddling with the settings in my Device Manager. It will only recognize it as an Unknown Device, not even an Apple device.
What should I do? I just got this thing through a trade, it's clean, wifi works fine, in great condition. I just don't know what to do! It won't show up in iTunes at all, won't show up as a mass storage device, nothing. I am running Windows 7. I've also tried using different cords, different usb ports, and another computer. None of that made a difference.

Haveylu looked ere:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
Pay particular attention to the parts concerning the the Apple Mobile Device service.

HT201210 USB device not recognized

the message USB DEVICE NOT RECOGNIZED keep showing and i cannot sync my ipad to mu computer. Its charging for more than 8 hours for less than 50% battery life. What should i do? its not even a year old.

You should use the charger that comes with your iPad. USB port usually do not supply enought current to charge battery.

USB device not recognize & cannot recharge ipad

Similar Messages

Maybe you are looking for