USB device not recognized after connecting the iphone to PC

Hi all,i have an iphone 3Gs 16 GB.I have some problems with it.Yesterday when I decidet to plug my iphone to PC and update the iOS,windows gives a message:USB device not recognized. ***?! I tried to change the USB cable and no fix,i tried reinstalling iTunes-same thing,I tried on another computer-the same.So in my country there's no apple store just Orange store what sels this mobiles and i took it there, so i'm waiting for the response.What could be with it?! There was no water or physical damage. ?! Thanks a lot

someone? please

Similar Messages

USB device not recognized after upgrade to Mountain Lion

I just upgraded from 10.6.8 to 10.8.2 (mountain lion)
I use a usb audio interface (the Native Instruments Komplete Audio 6, to be exact) for recording. Prior to the OS update, it was working fine. Post-update, it is unrecognizable by my computer... it doesn't show up in the "sound" panel in system preferences, it doesn't show up in the system profiler. It doesn't exist.
I have posted on the Native Instruments forum as well but I thought maybe someone here has had a similar experience. Thanks!

AgentKol wrote:
Think I should do just that. I am a loyal NI customer but this is annoying. Apogee is probably a better option with Mac.
Agreed, but don't forget about Lexicon, I use one of their Ionix units (U82S) and it has remained flawless, from Snow Leopard to Mavericks. As far as I know all Lexicon devices work with Mavericks, even the cheap little Alpha.

USB device not recognized, and more!

This morning when I tried to sync m y Z22, I got "USB DEVICE NOT RECOGNIZED". Connected the cable to every one of my USB ports, tried to sync each time but got the same message.
I shut down the PC, unplugged it, waited a few minutes, reconnected it, rebooted, and tried to sync again. Still got "USB DEVICE NOT RECOGNIZED".
Checked Palm Support, was advised to upgrade to the current version of the software (I was using V4-something). Downloaded and installed the upgrade. I got an error at the end of the installation that (what I assume was my old software) had been moved to Palm OS Incompatible Apps.
I tried to sync again, same problem. Opened the (new) software & half my data is gone.
So, I have a few problems:
1 - How do I fix this &^#$!!! USB error? and,
2 - How do I roll-back the software to my previous version to access all my data? In Add/Remove Programs, with Updates checked, the new software is the only one there. (Because I couldn't sync, at least the data on my Z22 is still intact.)
Someone PLEASE help, my whole LIFE is in this thing!!!
Thanks in advance,
Fig
Z22/WinXP Home SP3/USB
Post relates to: Palm Z22

try to update the driver in your device manager.. right click on palm handheld then update driver...
if not successful..
try this..
Force Un-installation of the Device Driver.
Close all running programs.
Open the Run Application.
Click Start.
Click Run.
Type “cmd” (without the quotes) then click OK. The Command Window will open on the default directory C:\Documents and Settings\<windows login>\.
Type “set devmgr_show_nonpresent_devices=1” (without the quotes) press enter. It should just go to the next line.
Type “start devmgmt.msc” (without the quotes) then press enter. The Device Manager should open.
On the Device Manager
Click View from the menu bar.
Click Show Hidden Devices.
Look for categories, Palm OS Handheld, Other Devices and Universal Serial Bus Controllers.
Expand Palm OS Handheld (if available) and uninstall all PalmHandheld.
Right+Click on the PalmHandheld.
Click Uninstall.
Repeat Steps A and B until all PalmHandheld are Uninstalled.
Expand Other Devices (if available) and uninstall all Unknown Devices.
Right+Click on the Unknown Device.
Click Uninstall.
Repeat Steps A and B until all Unknown Devices are Uninstalled.
Expand Universal Serial Bus Controllers and uninstall all Unknown Devices.
Right+Click on the Unknown Device.
Click Uninstall.
Repeat Steps A and B until all Unknown Devices are Uninstalled.
Close the Device Manager.
Restart the Computer.
After Restart, wait for all the components to be loaded on the System Tray especially the Hotsync Manager.
Perform Hotsync.
Post relates to: Centro (Unlocked GSM)
Post relates to: Centro (Unlocked GSM)

Re: "USB device not recognized." "The connection between your device and the desktop could not be established. Please check your setup and try again." Tungsten E2

Have had my Tungsten E2 for 3 years...I always use cable to Hotsync, and the last few weeks it has worked only intermittently. Either the device is not recognized, or it starts the HotSync and then freezes. I have checked out various online suggestions but then discovered that the only thing that seems to work is to exit Hot Sync Manager, then restart it again each time - then Hot Sync seems to work fine - a temporary solution! I don't have Bluetooth capabilities. I can't figure out if I need a new cable, a new OS (have Vista), a new laptop (only 2 years old) or a new Palm! Any suggestions? Thanks!
Post relates to: Tungsten E2

Hello!
The next time that happens, USB device not recognized error, unplug the cable from the PDA and pc, then soft reset the device, then plug the PDA back in and see wat happens.
Post relates to: Treo 650 (Unlocked GSM)

"USB Device Not Recognized" Message when connecting iPod Nano

I get the following windows pop up when connecting my son's iPod Nano
*"USB Device Not Recognized"*
*One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message.*
I have successfully connected this device to this computer before so I don't know what has changed.
Message was edited by: ipodnannouser

This did not work for me. I have a laptop that was running Windows XP, and it had no problems recognizing the iPod. I was having problems with XP, and rather then reinstall XP, I did a clean install of Vista. I did a settings transfer, so the new install of iTunes came already configured--I mention this since I don't know if it was a factor.
When I plugged in the iPod, I got the USB Device Not Recognized. The usbstor.inf file did not fix the problem. However, the solution at http://www.winvistabeta.com/groups/275128/ipod-usb-device-not-recognized/message .aspx did fix the problem. Do this:
Reset the iPod:
1. Unplug the iPod.
2. Turn the hold switch to HOLD and then back to off.
3. Hold the Center and Menu buttons for 6 seconds until you get the Apple logo when you release them.
4. Plug in the iPod. It should now be recognized.
This worked fine for me the first time. Thanks! Jack

USB device not recognized ... any help ?

Hey guys,
So i went to plug my iPhone 3G into my PC running Windows Vista and it comes up with the error message,
"USB Device Not Recognized
One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it."
Last time this happened I uninstalled the USB Root Hubs on my computer and when they reinstalled my iPhone connected, but it has happened again and this method no longer works.
I've tried restoring my phone, turning it on and off, i tried stopping my computer from turning off my USB ports but to no avail...its getting very frustrating because i can't sync my phone
ANY suggestions would be great PLEASEEEE!
Message was edited by: chris__robin

Try a different port and a different USB cable.

Usb device not recognized on shuffle

i have a belkin usb 2.0 device with 2 ports. it is plugged into my ibm thinkpad laptop. the mouse works fine in both ports -as does a photo scanner. but for some reason, the ipod shuffle is not recognized - i keep getting a green blinking lite and a message that says "usb device not recognized". funny, because the shuffle worked fine the other week when i installed all the software after purchase. i've updated windows software and reset the ipod. i've read elsewhere that some people have had the same problem - and that it was a malfunctioning usb port on the ipod shuffle. if so, what a piece of junk. maybe i just need to call tech support and ask for a new shuffle - i don't think that downloading the updater, etc. will help. any suggestions? thanks.

If it's working with other computers (using the same USB cable to connect the shuffle), then the problem is probably related to your computer.
If you connect something else to the same USB port (like a USB flash drive if you have one), does it work?
If you are using a USB hub to connect the shuffle, be sure to try a port that is directly on the computer. And try more than one port that is on the computer.
Also, it may be helpful to know some other details, such as type of computer (Windows or Mac) and the version of OS.
Since this is a laptop, if it has a main battery that can be removed, you may want to try disconnecting it from power and removing the battery. Leave it that way for a new minutes. Then, put the battery back, start it up, run iTunes first, and try the shuffle again. If there was a problem with your USB ports, that may correct it.

Windows won't recognize my iPod - USB device not recognized

This is really frustrating. So I got a 4gb iPod nano on Saturday, took it home, set it up and everything was going just fine, no worry's. About 4 hours later I went to adjust my songs and it would not come up in iTunes. A little pop-up box said that the "USB device not recognized - one of the USB devices attached to this computer has malfunctioned and windows does not recognize it." After owning my iPod for less than an afternoon, I now have an ipod that I can do nothing to including change the music, charge it, etc. It works normally otherwise, it just won't connect to my computer. I then plugged in my older 256mb usb stick, and the same message, it too does not get recognized by windows. So I then tried a brand new 1gb usb stick that I had and the same result, not recognized by windows. I updated my itunes to the latest one after purchasing my ipod (version 7.4.3.1) and have looked up everything that I can and tried everything I saw to try, but nothing, absolutely nothing, worked. However my usb mouse, usb joystick, and usb printer all still work, but my moniter that has four usb outlets on it causes the same message, if I plug in the cable that connects one usb on my computer to the four on my moniter, windows can not recognize it. When I look in my device manager at the "unknown device" under the usb controller list it says that there is not driver for it, however I know that the drivers are either on my computer or built into windows. Any help? Anybody have an idea about what to do? Is it something in my windows registry has changed because of the new itunes, etc.?

Now that I've had some sleep, I realise I didn't really provide information that may lead to some specific help. Here goes - when I first plugged in the ipod nano (8gb), It displayed the screen it was supposed to - I could see the lightning bolt through the battery icon and knew it was charging. The icon for the ipod also appeared in the left-hand listing in itunes (in the section that existed under Library, before the sections Store and Playlists). This section now does not appear (I can't remember the title of this section, but it might have been 'devices'). In fact, I'm pretty sure this problem started when I clicked on this icon - nothing happened and it disappeared - so did the display on the ipod, which is not just the apple. This means itunes has only Library, Store and Playlist in the left-hand colunm. While I accept that computers do not work on normal logic, this seems to me to indicate that the drivers are fine, the system is fine, my laptop is fine - its the ipod or the usb cord. This morning as I tried again, this time my laptop gave me the option to 'click on the balloon to solve the problem' - let me quote: "One of the USB devices attached to this computer has malfunctioned, and Windows does not recognise it. Try reconnecting the device. If Windows still does not recognise it, replace the device". Come on folks - one of you will surely know how to fix this (short of me taking the ipod back to the store to get my money back).

USB Device Not Recognized (&IPOD WILL NOT TURN ON)

I have had an iPod Shuffle G2 for 6 months now with no problems until today.
It went flat when I was at my friends place so when I got back to my mums I plugged it into my laptop and it told me "USB Device Not Recognized One of the USB devices attached to this computer has malfunctioned and windows does not recognize it" I thought there was just a prob with that port in my laptop, so I put it in the other one. So I though Ill wait until I get to my nan and pops and put it in there computer which is where I sync it. Same problem in both ports. Except on this computer the orange light is on but doesnt flash.
Now my iPod doesn't turn on at all..
Which is fantastic..
Help yeah?
My mum is gonna kill me.

thank you for you help so far. I am very frustrated with this thing. I have been trying to correct this problem for hours.
I will try to disable virus protection. but I will have to enable virus protection again. what should i do?

Zen Vision M...USB Device Not Recognized

My Zen Vision M 30g?is no longer recognized by my computer. I get the following message: "USB Device Not Recognized: One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it." I haven't changed anything on my computer (Windows XP Home Edition SVC Pak 3), so I don't know why it would not recognize my player all of a sudden. My zen still plays and charges using the portable charger, so it is still usable; however I can't change anything on the player. So far I've tried disc clean up, changing USB ports and plugging it into another computer (got the same message). I haven't seen anything on the bulletin board about "malfunctioning." Does this mean my zen is done?

Thanks. I keep getting directed to that knowledge base page, but it is not addressing my problem. My computer immediately tells me that the device has "malfunctioned" and the computer does not recognize it. I only have the usb cord that came with the zen, so I don't have another one to try. I love my zen and have staunchly defended it over the years vs. an i-pod. However, this is my 2nd one in 5 years. (The first one fried itself, but fortunately was still under warrantly.) Sadly, I, too, am considering moving on. I onlyreceived generic help fromthe Creative SupportTeam (who ultimately told me my zen is "unrepairable" when their one-size-fits-all solutions didn't work).Since there seems to be an overwhelming # of people experiencing similar problems, maybe the time is right to make the change, especially since an iPod classic 60 GB (7th Generation) is quite affordable these days.

When I connect my iPhone 4s to the computer, it says "USB device not recognized" , how do I fix this?

When I connect my iPhone 4s to the computer, it says "USB device not recognized" , how do I fix this?

Look to the right in the MORE LIKE THIS box.

"USB device not recognized." "The connection between your device and the desktop could not be established. Please check your setup and try again." Tungsten E2, Outlook 2007

Hi,
I am running XP SP 2, on a Dell Vostro 1000, Palm OS Garnet v5.4.7 on a Tungsten E2. I have worked though issues relating to synchronization, Outlook 2007, Docs to Go, etc., in the past. Thank you board members!
Once I worked thru all the initial problems, my Tungsten E2 was sync' ing beautifully to my laptop until a few days ago. There have been no changes (I know of) to the configuration, but now I receive "The connection between your device and the desktop could not be established. Please check your setup and try again." On the laptop I sometimes get "USB device not recognized." I am unclear why I get the PC message sometimes and not others.
I have tried the following: (not necc exactly in this order)
Double checked Hot Sync Mgr settings: Local USB (ver. 6.0.1)
Reset the Palm (multiple times)
Rebooted the laptop (multiple times before and after the Palm resets)
Went to Support Libraries including http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=57,E=0000000001060189973,K=9550,Sxi=3,Case=Obj(3695...)
and http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=PalmSupportKB,ts=Palm_External2001,Case=obj(1409)
Followed the steps in "Start Here" found at http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=26057
Moved Backup directory as per a post on this forum
Looked for a deleted a file called "Graffiti_ShortCuts_____________" per a post on this forum
Followed the steps in HotSync troubleshooter guide you can run through located on
http://kb.palm.com
Went into Device Manager - found it shows no yellow ! 's
Followed Device Mgr Troubleshooter - went all the way thru with no solution
Tried all four USB ports - the PC's bell-like tone does not sound when I disconnect or reconnect the Plam's cradle like it does when I conn/disconnect other USB devices -I think that is a clue. ...?
Cleaned the Palm's contacts (and cradle's contacts with a old, dry toothbrush)
Read all the posts under "USB device not recognized."
OK, I'm at a loss, can anyone help me? Many thanks in advance!
~Bob
Post relates to: Tungsten E2

Hello!
Using a cradle with the Tungsten E2? Tried bypassing the cradle and just use the hotsync cable? Tried a different computer yet? Somehow, the PC is having problems getting a signal from the device. I assume you have the laptop charger plugged into the laptop during this? Not going through a docking station or port-replicator.
One crazy thing you can try is unplug the charger from your laptop, remove the battery from the laptop and leave it out for like 10mins and put it back in and reboot the laptop. This should not cause side effects but still contact your OEM to make sure that nothing else is needed after leaving the battery out for extended period of time. Keep me posted.
Post relates to: Treo 650 (Unlocked GSM)

USB Device Not Recognized when Iphone connected to PC

Hello,
Every time I connect my Iphone 4S to my PC I get the error "USB Device Not Recognized". I did not have this problem before. I tried uninstalling Itunes and all its components and reninstalling it, restaring my computer, restarting Iphone and I even reset all the setting on my Iphone. I connected my wife's Iphone 4 using the same cable and PC and connected and started syncing with Itunes right away. If anyone has any pointers on how to fix this problem, any help will be much appreciated.

try reseting the phone
RESET DEVICE
Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost).

I have an Iphone 5S and used to sync it to my computer in the past without any problem, but now I can't and appears the message "usb device not recognized", and the cable is good and so the USB port. Do you have any idea what's the problem?

I have an Iphone 5S and used to sync it to my computer in the past without any problem, but now I can't, and appears the message "usb device not recognized", and the cable is good and so the USB port. Do you have any idea what's the problem?

Try leaving it plugged in and then restart the computer.
If you are on Windows this link may help but it is a bit old.
http://www.technologynext.org/error-usb-device-not-recognized-how-to-fix/

My ipad is not connecting the computer when i plug in, USB device not recognized pops up. I uninstalled and reinstalled itunes without any improvement.

I cannot get my ipad to sync with the computer, the message USB device not recognized keeps popping up. I've uninstalled and reinstalled itunes without an improvement.

Do you have firewall or anti-virus software running? If you do, it helps to turn it off. Otherwise, click on this link and see if it helps: http://www.apple.com/support/ipad/assistant/itunes/

USB device not recognized after connecting the iphone to PC

Similar Messages

Maybe you are looking for