USB device not recognized ... any help ?

Hey guys,
So i went to plug my iPhone 3G into my PC running Windows Vista and it comes up with the error message,
"USB Device Not Recognized
One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it."
Last time this happened I uninstalled the USB Root Hubs on my computer and when they reinstalled my iPhone connected, but it has happened again and this method no longer works.
I've tried restoring my phone, turning it on and off, i tried stopping my computer from turning off my USB ports but to no avail...its getting very frustrating because i can't sync my phone
ANY suggestions would be great PLEASEEEE!
Message was edited by: chris__robin

Try a different port and a different USB cable.

Similar Messages

  • USB DEVICE NOT RECOGNIZED? HELP!!

    On Windows Xp, When i plug my my ipod into the usb it pop up USB DEVICE NOT RECOGNIZED. then it says "Will not connect b/c No drivers are installed for this device". What could this be? Wan even show uo in I-tunes.

    After searching many discussion boards, i found a solution that worked -- simply reset the device. Here's how: While the USB cable is plugged into your USB drive, and the iPod plugged into your USB cable, lay the iPod on a flat surface, make sure the hold toggle is toggled toward "hold" (you may have to toggle it off, then on to hold to initiate the reset), then press the menu button (but press away from the center, toward the outside of the wheel) simultaneously with the center button (people call this the "select" button, but it doesn't say that on my device), holding them both down for 10-15 seconds. I did this twice, then the apple icon appeared and instantly (miraculously) on the screen of my iPod my computer recognized the device (after 2 hours of trying to uninstall, reinstall software, remove the drivers, etc., at the suggestion of other discussion boards -- all to no avail). Hope this helps!
    IBM ThinkPad   Windows XP Pro  
    IBM ThinkPad   Windows XP Pro  

  • My ipod 4 when i plug it to my pc Windows 7 had worked fine for 8 months then one day i plug it in and a message came USB device not recognized, i tried reset network settings and nothing called apple they did not know any help out there TX

    My ipod 4 when i plug it to my pc Windows 7 had worked fine for 8 months then one day i plug it in and a message came USB device not recognized, i tried reset network settings and nothing i did not install any software before this happend i called apple they did not know, any help out there TX

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • USB device not recognized - ipod video-help!!

    when I connect my ipod video, I get a message "USB device not recognized", when I click, I get: "no drivers installed for this device". I have re-installed the ipod software, reset the ipod and re-installed itunes, just in case. I have been on this problem since Christmas. Any ideas at all, anybody?
    dell   Windows XP  

    I have this EXACT same problem. And my ports are definitely 2.0 USB. I've uninstalled and installed all the iPod, iTunes and Quicktime components at least 4 times. I've reset the iPod. I've read everything I can get my hands on... nuthin'... nada...
    Can anyone help?

  • 3G iPod Touch "USB device not recognized" on any PC

    My 3G been working fine for 1+ yr. Running iTunes 10 on a WinXP system; latest OS (4.2.1?) everything was up to date and working fine. One day I get "USB device not recognized" when I hook it to the PC. Also, when connected to a charger, I don't get the battery screen. It charges either way, but slowly.
    I visited the local Apple store & the guru checked it on her system, with same results. I just reset it, hoping for a miracle, but it still isn't recognized.
    Help?

    Hi Che-Che. I'm having what looks like the same problem. Cannot get this iPod Touch 4th Gen to be recognized on any computer. When I use the white Apple cord that came with it, absolutely nothing happens. Not a sign of being recognized or not being recognized. I brought a third party cable made by Scohche and it is made for iPod, but at least the computer acts like it is starting to load the USB driver, then it fails. The other cable you are talking about, was it an Apple cable? I'm leaning towards it being a faulty Apple cable.

  • I have an Iphone 5S and used to sync it to my computer in the past without any problem, but now I can't and appears the message "usb device not recognized", and the cable is good and so the USB port. Do you have any idea what's the problem?

    I have an Iphone 5S and used to sync it to my computer in the past without any problem, but now I can't, and appears the message "usb device not recognized", and the cable is good and so the USB port. Do you have any idea what's the problem?

    Try leaving it plugged in and then restart the computer.
    If you are on Windows this link may help but it is a bit old.
    http://www.technologynext.org/error-usb-device-not-recognized-how-to-fix/

  • My ipad is not connecting the computer when i plug in, USB device not recognized pops up.  I uninstalled and reinstalled itunes without any improvement.

    I cannot get my ipad to sync with the computer, the message USB device not recognized keeps popping up. I've uninstalled and reinstalled itunes without an improvement.

    Do you have firewall or anti-virus software running?  If you do, it helps to turn it off.  Otherwise, click on this link and see if it helps:  http://www.apple.com/support/ipad/assistant/itunes/

  • Hi Any time i plug mt iphone 4 in i get message usb device not recognized what can i do to fix this i am runnung Windows 7 and my phone is dead

    Hi, whenever I try to plug in my iphone to a computer it says, "USB DEVICE NOT RECOGNIZED". I just want my phone to charge because it is dead. Ive tried to charge on my xbox, nothing. Tried a different charger, nothing.

    Try cleaning the connector on the bottom of the phone. Use a magnifying glass to see what is stuck inside, a dry toothbrush and/or wood or plastic toothpicks (nothing metal). If that doesn't resolve the problem your phone is broken.

  • "USB Device Not Recognized" Bubble/ Ipod won't connect to Windows

    Whenever i connect my ipod to my computer the ipod goes to "do not disconnect" and a bubble pops up on my computer saying "USB DEvice Not Recognized" i have switched it to all of my usb ports and unplugged all usbs except for my mouse at the same time. this happens 95% of the time. my ipod does charge while connected and it has only connected to itunes once in the past 2 weeks. im not sure if it is itunes because it started around the time i updated to itunes 7. since it is a windows bubble though i think it is a windows or ipod problem and not itunes. i have a dell that isnt great but works fine.
    thanks for any help.
    ... Go TTU!

    Make that two idiots. My roommate got a Sansa and I decided to try out the cable. Nothing happened. Now suddenly my nano isn't recognized by my computer. I'm glad I read your post, now I can stop looking high and low for a solution. Until this happened it worked good as new.

  • "USB device not recognized" when ipod plugged in???

    (ipod mini 4gb)
    When I plug my ipod into my laptop I get the message: "USB device not recognized." It says the device has malfunctioned!!! If I click on this error message it says my ipod is an unknown device and no drivers are installed for it???
    It was working fine until a few days ago. If i reset it I can charge it up but that's all, it still does not appear in itunes or on my computer.
    I've tried eveything on the help website but nothing works! Can anyone help?!
    patriot 3050   Windows XP  

    ok my question is do you have a mac or windows based laptop
    here is why and what happened to my ipod mini
    my ipod mini was connected to my macintosh charging while i was using my imac and it came up with a system update 10.4.3 i installed it and finished installing it and afterwards my apple wouldn't recongnize my ipod mini or even display it one the screen i found out by myself that when the apple update got to the end of the update it installed new hard drive drivers but also installed the drivers on the ipod mini which locked out the mini's internal hard drive and my mini then stop responding it would play music and charge but wouldn't connect to the computer
    so what i did to fix it was this
    i went into utilites in mac os x tiger or any version of os x has this and selected disk utility you will notice that the ipod will appesr in disk utility but not on the desktop this is due to a recent system update driver that isn't compatible with the internal drive on the ipod mini so in disk utility just select format the drive in a mac os partition standard works the best it will then format the ipod and the ipod will apear in the desktop again but not as a ipod let me explain when you format the ipod using the disk utility it formats and even erases the firmware of of the hard drive on the mini so when you are done formating the ipod run the ipod updater to reinstall the ipod's operating system and presto your ipod will now work again
    warning: i don't know how to fix this on a ipod in windows so if this is a windows based laptop you need to find someone witha macintosh to do this with sorry

  • 2G Nano-USB Device Not Recognized message

    2G Nano has been sitting for months. Decided to use it as a backup. When connected to computer (tried on 4 different computers running iTunes) I get a "USB Device Not Recognized" message. It shows up in "Device Manager" as an "Unknown USB Device" not an "iPod". Have performed the required 5 Rs and it still will not work. Any help would be greatly appreciated!

    This did not work for me. I have a laptop that was running Windows XP, and it had no problems recognizing the iPod. I was having problems with XP, and rather then reinstall XP, I did a clean install of Vista. I did a settings transfer, so the new install of iTunes came already configured--I mention this since I don't know if it was a factor.
    When I plugged in the iPod, I got the USB Device Not Recognized. The usbstor.inf file did not fix the problem. However, the solution at http://www.winvistabeta.com/groups/275128/ipod-usb-device-not-recognized/message .aspx did fix the problem. Do this:
    Reset the iPod:
    1. Unplug the iPod.
    2. Turn the hold switch to HOLD and then back to off.
    3. Hold the Center and Menu buttons for 6 seconds until you get the Apple logo when you release them.
    4. Plug in the iPod. It should now be recognized.
    This worked fine for me the first time. Thanks! Jack

  • Usb device not recognized on shuffle

    i have a belkin usb 2.0 device with 2 ports. it is plugged into my ibm thinkpad laptop. the mouse works fine in both ports -as does a photo scanner. but for some reason, the ipod shuffle is not recognized - i keep getting a green blinking lite and a message that says "usb device not recognized". funny, because the shuffle worked fine the other week when i installed all the software after purchase. i've updated windows software and reset the ipod. i've read elsewhere that some people have had the same problem - and that it was a malfunctioning usb port on the ipod shuffle. if so, what a piece of junk. maybe i just need to call tech support and ask for a new shuffle - i don't think that downloading the updater, etc. will help. any suggestions? thanks.

    If it's working with other computers (using the same USB cable to connect the shuffle), then the problem is probably related to your computer. 
    If you connect something else to the same USB port (like a USB flash drive if you have one), does it work?
    If you are using a USB hub to connect the shuffle, be sure to try a port that is directly on the computer.  And try more than one port that is on the computer.
    Also, it may be helpful to know some other details, such as type of computer (Windows or Mac) and the version of OS.
    Since this is a laptop, if it has a main battery that can be removed, you may want to try disconnecting it from power and removing the battery.  Leave it that way for a new minutes.  Then, put the battery back, start it up, run iTunes first, and try the shuffle again.  If there was a problem with your USB ports, that may correct it.

  • "USB Device not Recognized" when shuffle is plugged into computer

    Everytime I plug my shuffle into my Dell laptop it comes up with the message "USB device not recognized". The shuffle doesn't show up in my computer or itunes. I've done some of things that it says to try, but I'd really like to get this fixed and get my shuffle working. Typically when I plug it in, it blinks once, yellow/orange, and then no more, and the notice comes up on the computer screen. If this makes a difference, the shuffle worked fine until last summer when my hard drive crashed. Upon installing a new hard drive, the shuffle began to not work/sync with my computer as it had been before. Any suggestions on how to get my shuffle working again? Much appreciated!

    Well start with these articles and see if that gets you anywhere...
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    http://docs.info.apple.com/article.html?artnum=305136
    iTunes for Windows: iTunes 7 doesn't recognize iPod
    http://docs.info.apple.com/article.html?artnum=304434
    iPod missing in "My Computer" or in iTunes for Windows
    http://docs.info.apple.com/article.html?artnum=61711
    Also you might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
    Putting iPod into Disk Mode
    http://docs.info.apple.com/article.html?artnum=93651
    Perhaps the iPod Shuffle utility might help?
    http://docs.info.apple.com/article.html?artnum=305204
    Patrick

  • "USB Device Not Recognized" error when I connect iPod to my PC

    I have a brand new 5th gen (I think) iPod.
    I have been able to connect it successfully to my home laptop, download music to it and play it so I know the iPod works per se and the cable is ok too.
    Now at work (where tons of my music is) when I connect it to my PC here and I get a "USB Device Not Recognized" error pops up from my taskbar. When I click on the message it pops up a "USB Device Not Recognized" window which displays a list of USB ports, and shows "Unknown Device" for the one where the iPod is connected.
    I think its probably USB1.something as opposed to USB2.0 but from what I understand that shouldn't matter.
    Can anyone suggest anything ?
    I've tried the 5R's as far as I can, and I read through this thread:
    http://discussions.apple.com/thread.jspa?threadID=500559&tstart=15
    but there didn't seem to be anything conclusive.
    Thanks for any help,
    Jill

    First make sure the latest iTUnes is installed on this work PC, IF your allowed to install things on it, the latest iTunes version is 6.0.4.2 and can be downloaded from the apple site (Hit iPod+iTunes tab at the very top of this web page)
    Another thing is what version of windows is the work PC? Is it windows XP Windows 2000 Or windows Me 98? iTunes will only run on XP and 2000

  • Computer says usb/device not recognized when plugged in??

    When I plug in my sons ipod nano 7th generation, just recently says usb/device not recognized and doesn't light up when plugged into the wall either??? Any suggestions??

    This came from another thread, but worked for me.  Problem is with newest iTunes 4.62.  Unistall iTunes, as well as its helper programs (Apple Application Support, Apple Mobile Divice Support, and Apple Software Update).  Reboot, and reinstall iTunes.  It will reinstall all the other ones and you should be able to connect your nano.  Good luck.

Maybe you are looking for

  • Error in UTL_FILE

    Hi, I am working in oracle9i . I am using UTL_FILE to read and write a file in oracle. If i use the procedure means. SQL> CREATE OR REPLACE PROCEDURE test_utl IS 2 id UTL_FILE.FILE_TYPE; 3 BEGIN 4 id := UTL_FILE.FOPEN('/oracle/data', 5 'test.txt', 6

  • Problem with Multicolumn Listbox Scrolling

    Hello... Can anybody please tell me how to scroll according to row no. in multicolumn listbox?                 I'm working on a VI where I have to test some conditions which are depending upon RPMs... For testing ease I have sorted the conditions acc

  • 2014 mac mini storage and ram details

    First there is mention in a report that a PCIe port is present.  Does this mean it is possible to have both a 2.5 HDD SATA and PCIe stick in and fuctioning.  Also the  low model can't upgrade ram after purchase is this the case with all the models of

  • Slow Query Issues Oracle 11GR1

    Hi All, Oracle 11.1.0.6 on AIX 6.1. CPU-8 CORES, Memory - 32G db size - 500G Recently we did a OS Hardening(mainly on OS security) followed by upgrade of RAM (from 16G to 32G) in a production environment. We restarted the DB but did not restart the s

  • Enabling SQL Tracing for an instance

    Hi, I am aware that SQL_TRACE init parameter is deprecated : Oracle® Database Upgrade Guide 10g Release 2 (10.2) Part Number B14238-01 Initialization Parameters Deprecated in Release 10.2 SQL_TRACE So I searched the recommended way of enabling sql tr