"USB Device Not Recognized" -- iPod Not Recognized.

"One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it."
I get this error message everytime I connect my ipod. It just started doing this, it used to work perfectly fine. I uninstalled and reinstalled itunes and quicktime. I restarted and everything and then i connected the ipod first it went to connected and then it ejected a second later. Odd, I disconnected restarted the iPod then connected, now i get the above error. I tried all of the docs I could find but nothing seems to be working, it won't recognize so i can't restore it and I can't even charge it now. Though it works on my roommates computer just fine?
Message was edited by: Steels

I have this EXACT same problem. And my ports are definitely 2.0 USB. I've uninstalled and installed all the iPod, iTunes and Quicktime components at least 4 times. I've reset the iPod. I've read everything I can get my hands on... nuthin'... nada...
Can anyone help?

Similar Messages

  • TS1369 Hello! I have an Ipod Shuffle 2nd Generation and it is not recognized by my Windows 8 based laptop. An error message of 'USB device not recognized' is shown. I have the latest ITunes version installed, and tested the dock in other pc's.

    Hello!
    I have a problem connecting my Ipod Shuffle 2nd generation to my Windows 8 based laptop. The computer doesn't recognize the Ipod and issues an error message saying 'USB device not recognized'. I tried uninstaling ITunes(latest version) and all other Apple software and reinstaling it back again, checked my USB hubs in the 'Device Manager' section of the Control Panel, you name it.
    I could really use some help solving this.
    I've turned to the troubleshooting section in Apple Support but it has nothing concerning situations in wich the device isn't even shown in the 'My Computer' folder.
    Help a brother out, will you???

    Found a solution in another forum http://en.kioskea.net/forum/affich-63733-ipod-not-detected-on-computer (a few posts down).
    It was for an IPOD so you can see those details in the link.
    Found how to reset a shuffle and inserted it into these instructions - did not have to follow his last steps.
    - Turn off computer.
    - Plug Shuffle into usb.
    - Then you must reset your shuffle
    To reset iPod shuffle:
    Disconnect iPod shuffle from the computer (if connected).
    Move the switch on the iPod shuffle to the OFF position. Note that when iPod shuffle is off, the green stripe by the switch is not visible
    Disconnect iPod shuffle from the computer (if connected).
    Move the switch on the iPod shuffle to the OFF position. Note that when iPod shuffle is off, the green stripe by the switch is not visible.
    - Start computer and it should install the usb driver for the ipod automatically.
    - Your i pod will say do not unplug so don't. then open itunes and it will be there.
    I did not have to do these thing below – did not get error message and shuffle was displayed in Itunes. / LMc
    Just remember to not only eject ipod from itunes but stop usb.
    Go to the program icons near the clock and right click the usb icon and "safely remove hardware" will appear and click it.
    Stop it and select "apple ipod".

  • "USB Device Not Recognized" Bubble/ Ipod won't connect to Windows

    Whenever i connect my ipod to my computer the ipod goes to "do not disconnect" and a bubble pops up on my computer saying "USB DEvice Not Recognized" i have switched it to all of my usb ports and unplugged all usbs except for my mouse at the same time. this happens 95% of the time. my ipod does charge while connected and it has only connected to itunes once in the past 2 weeks. im not sure if it is itunes because it started around the time i updated to itunes 7. since it is a windows bubble though i think it is a windows or ipod problem and not itunes. i have a dell that isnt great but works fine.
    thanks for any help.
    ... Go TTU!

    Make that two idiots. My roommate got a Sansa and I decided to try out the cable. Nothing happened. Now suddenly my nano isn't recognized by my computer. I'm glad I read your post, now I can stop looking high and low for a solution. Until this happened it worked good as new.

  • "USB device not recognized" when ipod plugged in???

    (ipod mini 4gb)
    When I plug my ipod into my laptop I get the message: "USB device not recognized." It says the device has malfunctioned!!! If I click on this error message it says my ipod is an unknown device and no drivers are installed for it???
    It was working fine until a few days ago. If i reset it I can charge it up but that's all, it still does not appear in itunes or on my computer.
    I've tried eveything on the help website but nothing works! Can anyone help?!
    patriot 3050   Windows XP  

    ok my question is do you have a mac or windows based laptop
    here is why and what happened to my ipod mini
    my ipod mini was connected to my macintosh charging while i was using my imac and it came up with a system update 10.4.3 i installed it and finished installing it and afterwards my apple wouldn't recongnize my ipod mini or even display it one the screen i found out by myself that when the apple update got to the end of the update it installed new hard drive drivers but also installed the drivers on the ipod mini which locked out the mini's internal hard drive and my mini then stop responding it would play music and charge but wouldn't connect to the computer
    so what i did to fix it was this
    i went into utilites in mac os x tiger or any version of os x has this and selected disk utility you will notice that the ipod will appesr in disk utility but not on the desktop this is due to a recent system update driver that isn't compatible with the internal drive on the ipod mini so in disk utility just select format the drive in a mac os partition standard works the best it will then format the ipod and the ipod will apear in the desktop again but not as a ipod let me explain when you format the ipod using the disk utility it formats and even erases the firmware of of the hard drive on the mini so when you are done formating the ipod run the ipod updater to reinstall the ipod's operating system and presto your ipod will now work again
    warning: i don't know how to fix this on a ipod in windows so if this is a windows based laptop you need to find someone witha macintosh to do this with sorry

  • USB device not recognized - ipod video-help!!

    when I connect my ipod video, I get a message "USB device not recognized", when I click, I get: "no drivers installed for this device". I have re-installed the ipod software, reset the ipod and re-installed itunes, just in case. I have been on this problem since Christmas. Any ideas at all, anybody?
    dell   Windows XP  

    I have this EXACT same problem. And my ports are definitely 2.0 USB. I've uninstalled and installed all the iPod, iTunes and Quicktime components at least 4 times. I've reset the iPod. I've read everything I can get my hands on... nuthin'... nada...
    Can anyone help?

  • USB Device Not Recognized (&IPOD WILL NOT TURN ON)

    I have had an iPod Shuffle G2 for 6 months now with no problems until today.
    It went flat when I was at my friends place so when I got back to my mums I plugged it into my laptop and it told me "USB Device Not Recognized One of the USB devices attached to this computer has malfunctioned and windows does not recognize it" I thought there was just a prob with that port in my laptop, so I put it in the other one. So I though Ill wait until I get to my nan and pops and put it in there computer which is where I sync it. Same problem in both ports. Except on this computer the orange light is on but doesnt flash.
    Now my iPod doesn't turn on at all..
    Which is fantastic..
    Help yeah?
    My mum is gonna kill me.

    thank you for you help so far. I am very frustrated with this thing. I have been trying to correct this problem for hours.
    I will try to disable virus protection. but I will have to enable virus protection again. what should i do?

  • "USB Device Not Recognized" Message when connecting iPod Nano

    I get the following windows pop up when connecting my son's iPod Nano
    *"USB Device Not Recognized"*
    *One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message.*
    I have successfully connected this device to this computer before so I don't know what has changed.
    Message was edited by: ipodnannouser

    This did not work for me. I have a laptop that was running Windows XP, and it had no problems recognizing the iPod. I was having problems with XP, and rather then reinstall XP, I did a clean install of Vista. I did a settings transfer, so the new install of iTunes came already configured--I mention this since I don't know if it was a factor.
    When I plugged in the iPod, I got the USB Device Not Recognized. The usbstor.inf file did not fix the problem. However, the solution at http://www.winvistabeta.com/groups/275128/ipod-usb-device-not-recognized/message .aspx did fix the problem. Do this:
    Reset the iPod:
    1. Unplug the iPod.
    2. Turn the hold switch to HOLD and then back to off.
    3. Hold the Center and Menu buttons for 6 seconds until you get the Apple logo when you release them.
    4. Plug in the iPod. It should now be recognized.
    This worked fine for me the first time. Thanks! Jack

  • Ipod 7th generation. bought it 3 days ago. no problem then but now won't turn on. I keep getting a usb device not recognized (and i keep changing ports to no avail). what to do?

    ipod 7th generation. bought it 3 days ago. no problem then but now won't turn on. I keep getting a usb device not recognized (and i keep changing ports to no avail). what to do?

    wish i can rmber how mine was fixed i think i just waited tried again and likr magic it worked again left itunplugged, i was like you recently boughtand it happened to me, now i have another diffrent promblem with it.

  • My computer no longer recognizes my 7th Gen iPod Nano. "USB Device not recognized." What can I do to fix this?

    Hi!
    So here's what happened: My nano has been working just fine. I plugged it in this morning to my computer, and it automatically turned on, but instead of charging, it went to play music. I turned it off. However, it did not switch to charging mode. So I unplugged it, and then I plugged it back in. "USB Device not recognized." My iPod won't turn on anymore, and my computer simply does not recognize the nano.
    It may have gotten slightly damp yesterday as it rained a bit when I was walking home (though I kept it covered). When I got home, it proceeded to work for another two hours after that--then I turned it off. And this morning? It doesn't work, as described above.

    Try cleaning the connector on the bottom of the phone. Use a magnifying glass to see what is stuck inside, a dry toothbrush and/or wood or plastic toothpicks (nothing metal). If that doesn't resolve the problem your phone is broken.

  • 3G iPod Touch "USB device not recognized" on any PC

    My 3G been working fine for 1+ yr. Running iTunes 10 on a WinXP system; latest OS (4.2.1?) everything was up to date and working fine. One day I get "USB device not recognized" when I hook it to the PC. Also, when connected to a charger, I don't get the battery screen. It charges either way, but slowly.
    I visited the local Apple store & the guru checked it on her system, with same results. I just reset it, hoping for a miracle, but it still isn't recognized.
    Help?

    Hi Che-Che. I'm having what looks like the same problem. Cannot get this iPod Touch 4th Gen to be recognized on any computer. When I use the white Apple cord that came with it, absolutely nothing happens. Not a sign of being recognized or not being recognized. I brought a third party cable made by Scohche and it is made for iPod, but at least the computer acts like it is starting to load the USB driver, then it fails. The other cable you are talking about, was it an Apple cable? I'm leaning towards it being a faulty Apple cable.

  • IPod not recognized. says"USB device not recognized and has malfunctioned

    I just bought an iPod nano from one of my friends and i got the usb cord off of ebay. when i connect my ipod to my computer. it says usb device not recognized. i've installed software and everything. i've downloaded iTunes and all the ipod software i can find including the updater and other downloads from apple. PLEASE HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

    After switching to a Nano, my Dell pocket DJ is having the same problem you are describing. I can't tell what the fix is but I plan on purchasing a new USB as I suspect that may be the problem.

  • "USB Device Not Recognized" error when I connect iPod to my PC

    I have a brand new 5th gen (I think) iPod.
    I have been able to connect it successfully to my home laptop, download music to it and play it so I know the iPod works per se and the cable is ok too.
    Now at work (where tons of my music is) when I connect it to my PC here and I get a "USB Device Not Recognized" error pops up from my taskbar. When I click on the message it pops up a "USB Device Not Recognized" window which displays a list of USB ports, and shows "Unknown Device" for the one where the iPod is connected.
    I think its probably USB1.something as opposed to USB2.0 but from what I understand that shouldn't matter.
    Can anyone suggest anything ?
    I've tried the 5R's as far as I can, and I read through this thread:
    http://discussions.apple.com/thread.jspa?threadID=500559&tstart=15
    but there didn't seem to be anything conclusive.
    Thanks for any help,
    Jill

    First make sure the latest iTUnes is installed on this work PC, IF your allowed to install things on it, the latest iTunes version is 6.0.4.2 and can be downloaded from the apple site (Hit iPod+iTunes tab at the very top of this web page)
    Another thing is what version of windows is the work PC? Is it windows XP Windows 2000 Or windows Me 98? iTunes will only run on XP and 2000

  • USB device not recognized with 160G ipod

    I did absolutely nothing different, no updates, no hardware upgrades, didn't drop my ipod, suddenly when I plug my 160g classic into my computer vista just says "usb device not recognized" and I cant do anything. I can charge my ipod on my radio dock but that's it. I've tried plugging it into 2 32bit vista desktops, 1 32bit vista laptop, 1 XP laptop, and 1 64bit vista laptop and they all give me the same message. I've tried many different usb ports, and 2 different cables, nothing works. Help please!

    I don't know if this will help you, but I was having the same problem and when I sent it off for repair...they sent it back saying it was not under warranty b/c it had liquid damage, etc...bunch of BS! Anyway, I called tech support to do a little venting and the technician said i should try uninstalling itunes, Apple updates, and quicktime which will not mess up your library, etc. Restart and then download newest version of itunes from apple website which i did. I restarted again and then connected IPOD 160G to it and to his credit...Ipod started to connect and be recognized in itunes. I had to restart one more time w/ ipod connected so it would all sync, but bottom line...it worked. Apparently, the itunes/quicktime updates can screw w/ these new ipods causing problems. Why they just don't come out and say that or at least suggest this line of solution when they send an ipod back unrepaired...i don't know....very poor cust service on that end of it. Hope that helps.

  • USB Device Not Recognized - is my iPod toast?

    Got a new computer recently with Win XP. When I try to connect my iPod with a USB adapter I keep getting "USB Device not Recognized" and if I click that I get "Try reconnecting the device. If Windows still does not recognize it, replace the device."
    I can connect other USB devices like my compact flash cards etc. The iPod was working on my old computer.
    Any ideas??
    Thanks in advance for any help!!!

    I had a new ipod and windows wasnt recognizing it or giving me the message "new hardware found" and then telling me the drivers were missing... this is what I did and it fixed my problem.
    1. go to www.driverguide.com and sign up (for free)
    2. download usbstor.sys & usbstor.inf (and take note of where you download them to)
    3. update drivers by selecting folder you downloaded the two files to
    4. restart computer
    5. open itunes and then connect ipod
    good luck
    -jackie

  • USB device not recognized win7 iPod Touch 1g

    My computer will not recognize my 1st Gen Ipod Touch 8gb when I plug it into my USB port. I get a message USB Device Not Recognized. I've tried everything from resetting the iPod, uninstalling and reinstalling iTunes and all other Apple related programs, to fiddling with the settings in my Device Manager. It will only recognize it as an Unknown Device, not even an Apple device.
    What should I do? I just got this thing through a trade, it's clean, wifi works fine, in great condition. I just don't know what to do! It won't show up in iTunes at all, won't show up as a mass storage device, nothing. I am running Windows 7. I've also tried using different cords, different usb ports, and another computer. None of that made a difference.

    Haveylu looked ere:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    Pay particular attention to the parts concerning the the Apple Mobile Device service.

  • My ipod 4 when i plug it to my pc Windows 7 had worked fine for 8 months then one day i plug it in and a message came USB device not recognized, i tried reset network settings and nothing called apple they did not know any help out there TX

    My ipod 4 when i plug it to my pc Windows 7 had worked fine for 8 months then one day i plug it in and a message came USB device not recognized, i tried reset network settings and nothing i did not install any software before this happend i called apple they did not know, any help out there TX

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

Maybe you are looking for

  • OIC: Need to find the Source Code for the YTDSummary.java file

    Hi All, We have 11.5.10 implemention and we are using the OIC(Incentive Compensation) Application. In the Report Module for the Year-To-Date Summary we need look for the Java Source Code.The cnytdsum.jsp file call the YTDSummary.java file. We have te

  • Dynamic BOX-es in SAPScript

    Hi! I would like to reduce the coding in my SAPScript so I would like to use variables to position the BOX-es. I would like to write a line with values, and print a box around the items. I imagined it somehow like this: /E ITEMS /: &wa_pa0002-nachn&

  • Management of songs on my iPod

    I re-install Windows on My computer and all my songs was deleted cause an error. I think I could use my iPod as a HD and copy all songs in it on my new PC, but I'm not able to do. Someone could help me?

  • Formatting hard drive on Mac Mini

    Hi, I just bought a mac book and i'm selling my mac mini to a friend. now, i know i can format my hard drive though disk utilities, but when i erase my hard drive, what happens the next time i turn on my computer? i'm thinking it will be just like wh

  • Problems with regular expressions.

    Hi all. I want to substitute within an xml file a string with the following structure: Referencer="//@Model/@OwnedElement.0/@OwnedElement.1/@OwnedElement.0/@OwnedElement.1/@OwnedElement.33 ..." where the dots mean that the string within the quotes ma