USB devices on my M30X-118 do not work

i connect usb devices on my M30X-118 and they do not work .I have already check the usb ports from control panel - system - device manager and :they work properly: i do not know what to do. I have do the pc diagnostic tool and the usb ports have passed the test.

Hi
In my opinion it doesnt work because of power supply.
The USB ports dont provide enough power.
Check please this topic and comment from Sandros
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=10384&messageID=37213#37213
If the external USB device has no own power supply so you should use a USB hub with the external power supply.

Similar Messages

IPod Nano: Error Message "The USB device has malfunctioned and Windows does not recognise it"

Hi everyone, I just received 2 brand new iPod Nanos for my kids for Christmas, thought I'd be smart and sync them both now before wrapping them so I don't have to be messing around with them on the day. One synced without a problem, then using the same cable, same computer, same USB port, the 2nd one came up with "The USB device has malfunctioned and Windows does not recognise it" I've tried restarting my computer, unplugging and reinserting the USB. Is there anthing else I can try before returning it? Thanking you for any help.

I have solved my problem, I ended up ringing Apple and got an awesome lady who told me to reset it by pressing the sleep button and menu button together for about 10 seconds and once it actually turned on for the first time the computer then recognised it, so it's all good, :-) Thank you lovely lady!

HP Laser M1522NF the USB device attached to this computer is not recognised and has Malfunctioned

Hi,
I have this printer HP Laser M1522nf.It was working fine till today.Suddenly it has started giveng this error
"HP Laser M1522NF the USB device attached to this computer is not recognised and has Malfunctioned"
This error is not on printer but on my computer when I connect the printer USB cable.I have 3 laptops all have winxp installed on them.I have tried connecting the printer with all laptops and they all give the same error with reference to connecting usb printer cable and Malfunctioning.
Appreciate your gracious advice and guidance in this regard,
Many thanks

Is this at an office and you are logged in not as an administrator?
If that's not the case, then the message maybe true, that it did malfunction, and need to be serviced. (assuming you already tried power cycle the printer, making sure doors/trays are all properly put in.
======================================================================================
* I am an HP employee. *
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
***Click on White “Kudos” STAR to say thanks!***

My USB port (closest to the screen) is not working? And what is an IR Receiver in my USB port?

Hi everyone,
     I recently found out that my USB port, closest to my screen, is not working. Before I called Apple Care for help, I performed a PRAM and a SMC RESET, which unfortunately did not work. I called Apple Care and they help me troubleshoot simple resets such as, shutdowns and restarts. The representative I spoke with conluded that the physical hardware has an issue and must be brought to the Apple Store for a diagnosis. I called the Apple Store to at least budget the fee for getting a USB port fixed and it's about $300.00. I never dropped my macbook or had any sort tactile encounterment with hard surfaces by dropping or hitting. I don't understand how my macbook pro would be physically damaged. I then thought maybe my software was out of date (right now I am running 10.9 Mavericks) or I forgot to do the minor software updates, but I was at a lost again because my macbook is up-to-date. I searched for further help and found a way to monitor what's plugged into my usb ports. (I read in the apple forums that a girl had nothing in her usb ports, but upon looking at the System Information> Hardware> USB, that the macbook recognizes that there are drives in the ports) I looked at my ports; one is being used by wirless mouse (the port that works) and the other (the port that doesnt work) is being used by an "IR RECEIVER". Now, is the IR Receiver actually using that port and that's why my macbook cannot recognize other devices inserted into that port? Or is the IR RECEIVER suppose to be in that port and that the hardware for that port is simply damaged (which would mean I need $300.00 to get that fixed)? I know this is a lot, but someone help me?
(PORT THAT WORKS)
USB Hi-Speed Bus:
Host Controller Location:          Built-in USB
Host Controller Driver:          AppleUSBEHCI
PCI Device ID:          0x1c2d
PCI Revision ID:          0x0005
PCI Vendor ID:          0x8086
Bus Number:          0xfa
FaceTime HD Camera (Built-in):
Product ID:          0x8509
Vendor ID:          0x05ac (Apple Inc.)
Version:           5.16
Serial Number:          DJHBAJ06VRDH7FL0
Speed:          Up to 480 Mb/sec
Manufacturer:          Apple Inc.
Location ID:          0xfa200000 / 3
Current Available (mA):          500
Current Required (mA):          500
Hub:
Product ID:          0x2513
Vendor ID:          0x0424 (SMSC)
Version:           b.b3
Speed:          Up to 480 Mb/sec
Location ID:          0xfa100000 / 2
Current Available (mA):          500
Current Required (mA):          2
Microsoft® Nano Transceiver v2.0:
Product ID:          0x0745
Vendor ID:          0x045e (Microsoft Corporation)
Version:           6.34
Speed:          Up to 12 Mb/sec
Manufacturer:          Microsoft
Location ID:          0xfa130000 / 6
Current Available (mA):          500
Current Required (mA):          100
Apple Internal Keyboard / Trackpad:
Product ID:          0x0252
Vendor ID:          0x05ac (Apple Inc.)
Version:           1.18
Speed:          Up to 12 Mb/sec
Manufacturer:          Apple Inc.
Location ID:          0xfa120000 / 5
Current Available (mA):          500
Current Required (mA):          40
BRCM2070 Hub:
Product ID:          0x4500
Vendor ID:          0x0a5c (Broadcom Corp.)
Version:           1.00
Speed:          Up to 12 Mb/sec
Manufacturer:          Apple Inc.
Location ID:          0xfa110000 / 4
Current Available (mA):          500
Current Required (mA):          94
Bluetooth USB Host Controller:
Product ID:          0x821a
Vendor ID:          0x05ac (Apple Inc.)
Version:           0.42
Speed:          Up to 12 Mb/sec
Manufacturer:          Apple Inc.
Location ID:          0xfa113000 / 8
Current Available (mA):          500
Current Required (mA):          0
(PORT THAT DOESN'T WORK)
USB Hi-Speed Bus:
Host Controller Location:          Built-in USB
Host Controller Driver:          AppleUSBEHCI
PCI Device ID:          0x1c26
PCI Revision ID:          0x0005
PCI Vendor ID:          0x8086
Bus Number:          0xfd
Hub:
Product ID:          0x2513
Vendor ID:          0x0424 (SMSC)
Version:           b.b3
Speed:          Up to 480 Mb/sec
Location ID:          0xfd100000 / 2
Current Available (mA):          500
Current Required (mA):          2
IR Receiver:
Product ID:          0x8242
Vendor ID:          0x05ac (Apple Inc.)
Version:           0.16
Speed:          Up to 1.5 Mb/sec
Manufacturer:          Apple Computer, Inc.
Location ID:          0xfd110000 / 3
Current Available (mA):          500
Current Required (mA):          100

I can help with the "IR Receiver" part of your question. That's the piece of hardware inside older MacBook Pros (MBPs) that lets them work with the Apple Remote. "IR" is the standard abbreviation for "infrared," the portion of the electromagnetic spectrum used by remotes for many common devices (stereos, cable boxes, Apple TVs, etc.). The remote sends a coded stream of IR pulses; a corresponding receiver in the target device "sees" the infrared light and decodes it. The MBP's internal IR Receiver sends the received signals to the processor via USB through an internal hub.
The most recent MacBook Pros have dropped the IR receiver and no longer work with the Apple Remote.

A device attached to your system is not working!!

I am trying to connect to Oracle8i Personal Edition through a JDK1.2.1 application using the classes111.zip or classes12.zip package. After running the application I get this error message: UnsatisfiedLinkError: ocijdbc8: A device attached to your system is not working. I you have any idea what is happening, please answer inmediately.

You are using the oci8 driver so your program is looking for the native mode Oracle Client software. Install the Oracle Client software or use the thin driver.

HT201412 my device was updated and now is not working anymore, it is in recovery mode all the time

my device was updated and now is not working anymore, it is in recovery mode all the time.
what can i do???

Delete the shortcut you have at the moment and then create a new one as follows: 
#Use Windows Explorer to navigate to C:\Program Files\Mozilla Firefox. 
#Right click '''firefox.exe''' and choose '''Send To''', then '''Desktop (Create shortcut)''' 
Bear in mind that you're using an BETA version of Firefox and you're likely to encounter similar issues in the future.

HT4623 my iphon 4s got problem when i was updating it and screen become black and there is a usb & itone icon on it it dose not work any more ..any feedback about this guys?

my iphon 4s got problem when i was updating it and screen become black and there is a usb & itone icon on it it dose not work any more ..any feedback about this guys?

Connect it to iTunes and restore it.

Disk burning device of my macbook pro does not work

hi
the disk burning device of my macbook pro does not work from last night!!
it don't eject and don't pick CD!!! it is off!!!!!
in my macbook pro info see this messege:No disc burning device was found. If the device is external, make sure it’s connected and turned on.
I reset my System management Controller:http://support.apple.com/kb/HT3964 But it don't right!!!!
and i can not go to a apple support!!!! i'm in dubai!!!!! is here an apple support???
it don't have any other way to solve this problem???????

Try doing a Parameter RAM reset - hold down command/option/p/r keys at start up and wait for three chimes before releasing the keys.
If the hardware has filed there's nothing anyone here can do to help you ...

Windows 7 not forgetting disconnected USB devices, only on one PC, but not others/difer OS

Okay so I've got 3 computers:
1. Asus M5A99X EVO MOBO, Windows 7 Ultimate 64bit
2. Lenovo Ideapad u310 LAPTOP, Windows 8 (just 8)
3. Asrock z87e-ITX MOBO, Windows 7 Ultimate 64 bit and Windows 8.1 Pro 64-bit
This issue only happens on computer 3 under windows 7.
I've got a KVM switch that's supposed to make switching between these computers easier, it's very basic, it has one USB port going into it, and I plug my keyboard into that, my keyboard has a USB port on it that I plug my mouse into.
When I'm on windows 7 on computer 3 the KVM works fine for about the first 4-7 switches between it and another computer. But after that I get "USB Bandwidth Exceeded" popups. I can switch the port it's plugged into the computer and it will start
working again, but that defeats the purpose of having a KVM. And today it even locked up while I was MANUALLY switching the cable between my computers front access ports, because obviously the KVM wasn't reliable (like I switched between computers once every
4-10 minutes), and even BSOD on me.
I've contacted both Asrock and the KVM manufacturer and they both say it's the other's fault.
So I shrank my C: on Comp3 today and installed windows 8.1 on it, and than I spammed the KVM switching like 8+ times, and it never once locked up or complained about me exceeding the bandwidth.
So that means it's now Windows 7's fault, but it doesn't do this for Comp1.
Somehow my new computers Windows 7 is not working right, and I don't know any viable options I can do about it. (comp3 is only about 1-2 weeks old) I've ran all the windows updates I can and it no longer says there are new updates when i run it.
So I need some help about finding out why my Comp3's Win7 isn't forgetting that a USB device is no longer attached, because Win8.1 seems to have no problem with it.
And just sticking with Windows 8 isn't really the solution, as I can't %^#$#!@ stand Windows8/Metro/Tiles/tablet$@!#onmydesktop.
(laptop is a work laptop and i have no choice, but it's modded so I have my start menu back, but still it's annoying anytime I accidentally leave my desktop.)

...because it happens with even just the keyboard.
Even though it all works with Win8.1 have you:
-Tried a different keyboard?
-Tried connecting mouse and keyboard to an external powered hub and connecting the hub to the kvm?
-Tried connecting kvm to powered hub?

USB Device Not Recognized - USB device attached has malfunctioned & Windows does not recognize it

I have an HP Pavilion dv4 Notebook running Windows 7 Home Premium and the USB ports worked fine for an HP deskjet printer and an older Casio digital camera. Then one day, the laptop decided not to recognize the Casio digital camera and gave the error message "USB Device Not Recognized" and also indicated that the device attached to the computer has malfunctioned. This prompted me to buy a new Canon digital camera. Well, a new camera did not fix the problem. Now, anything connected to either of the 2 USB ports will not be recognized by my laptop. Help! I'm at a loss to figure this out. I've tried the suggested Microsoft help below:
Suggestion 1: For the issue with USB devices, uninstall and re-install all the USB controllers. This lets the controllers recover the USB port from its unresponsive condition.
The USB controllers represent the USB ports in Device Manager.
a. Click Start, type device manager in the Start search box and hit Enter.
b. Expand Universal Serial Bus controllers.
Note: You might have to scroll down the list to find this item.
c. Right-click the first USB controller under Universal Serial Bus controllers, and then click Uninstall to remove it.
d. Repeat the above step for each USB controller that is listed under Universal Serial Bus controllers.
e. Restart the computer. After the computer starts, Windows will automatically scan for hardware changes and reinstall all the USB controllers that you uninstalled.
f. Check the USB device to see whether it is working.
This did not correct the problem. Then from device manager, I tried updating drivers on all the USB controllers and root hubs. While some may have received downloaded software updates, it still did not correct the USB device not recognized problem after restarting the computer. I'm hoping someone knows of the fix to this situation and can pass it along to me. Thanks for reading and posting any help.
This question was solved.
View Solution.

Hey 655micha,
I'm sorry you're having an issue with a USB device. Do you get an error window that pops up? If so what does it say? Have you checked Device Manager? Is is just one device that isn't working? Has it ever worked before? Is it just one USB port in particular that isn't recognizing devices?
What model do you have? Here are the steps to find your product number. FN + ESC is the easiest way to find that information.

One of the USB devices have malfunctioned and windows does not recognize it---MESSAGE

Upon plugin, One of the USB devices attached has malfunctioned and window does not recognize it message is displayed. I have tried different settings with the USB driver. Have reset the ipod. Have reinstalled itunes on computer and ipod.
HELP PLEASE!!!

Here:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

USB audio input to voice-over tool not working

with FCE-HD on iMac i have system preferences set to USB-122 Tascam box for audio input/output (works great with GB for instance) but when i try using it for audio input on FCE and the voice-over tool set to USB-122, i hear no audio, the level meter doesn't more, etc, its still taking the audio from the built-in mic.
im sure its something simple im overlooking??
tia

Mark,
See if this post helps. Not familiar with USB audio devices myself, but found this searching:
John Hayward, "Audio out from FCE HD to USB audio iMic" #1, 10:11am Oct 4, 2005 CDT

USB Redirection in un-brokered SR VDI not working

I have installed Sun Ray Server 4.2 and SRWC 2.2 on a Solaris 10 5/09 server.
I am using my own kiosk script to connect to a Windows XP SP3 virtual machine. I have installed the srs-winstaller.exe on the XP VM with no issues.
I am having trouble getting USB redirection to do anything. In Windows, the "Sun Ray USB Redirector 1.1" icon is in the System Tray. Device Manager shows utSrSession with no errors. The Windows Event Viewer is showing Application errors for utUsbRedirector (newest first):
Warning: utUsbRedirector::WndProc (WM_WTSSESSION_CHANGE WTS_REMOTE_CONNECT g_start_threads failed)
Error: Usb_manager::g_stop_threads() - Handle 0 was not registered:0x2
Warning: Usb_manager:~Usb_manager() - g_port_driver_handle CloseHandle() failed
Warning: Usb_manager::g_stop_threads() - WaitForMultipleObjects Failed
Warning: Usb_manager::g_start_threads - process_return - packet_negotiate failed
Error: ServerChannel::flush (WriteFile failed - error:1
I turned up the uttscpd logging
utku7 4767 14177 0 10:20:34 ? 0:00 /opt/SUNWuttsc/lib/uttscpd -D 20
but the log files in /var/opt/SUNWut/log/uttscpd* are always empty.
Am I correct that mounted USB device should show up in:
/tmp/SUNWut/units/IEEE802.00144f3baa6b/devices/usb@1/hub@1
I have tried plugging in a scanner, a DVD burner, and an iPhone. Nothing ever shows up in that directory and Windows never shows any indication that something has been attached. The only thing I can get to show up in that directory is my USB flash drive, which uttsc maps in the old way using RDP device redirection. At least that means to me that the USB port works on the Sun Ray 2. It looks like I've missed something, can anyone direct me? Thanks.

Yup, that's exactly the kind of "I've missed something" I was looking for. Didn't know about that parameter. Thanks patrickb!
So I removed the -r disk parameter and added -r usb instead. That's what I needed, devices are now recognized by Windows.
Can you use -r usb and -r disk together or is that a bad thing when you insert a flash drive? Which would take priority?
My experience with just "-r usb:on" has been poor:
My genuine "Sun Partner Advantage" flash drive and my U3 Cruzer Micro flash drive both load drivers but don't show up in Explorer. When I try to open My Computer it hangs until I remove the flash drive.
A DVD burner worked (as a reader) for a couple minutes but then froze up.
My Windows Mobile 2003 SE handheld loads drivers but is not recognized by ActiveSync.
My iPhone failed as expected with a driver problem in Device Manager.
But...my NeatReceipts Scanalizer did work! It's a little 600 dpi color document feed scanner. I was able to do a full page color scan which was very nice.
I found that nothing worked at all the first time it was plugged in. It would be discovered by XP and drivers would be found but the device wouldn't show up at all. If I removed it and then re-attached it, I had much better results in terms of drivers loading. Of course most things still didn't work, but they came close.
Another positive was that no matter how locked up Explorer got, removing the device was always clean and I got full control of Explorer back.

Satellite A110-137: USB 1.1 to serial cable does not work

My computer is Satellite A110-137 and the OS is Windows XP home edition v 5.1 service pack 2. Language setting is Finland.
I have a Prolific USB 1.1 to RS232 Cable driver version 2.0.0.26.
It does not work at all. When I try to connect it to a Kantronics KAM packet radio modem using Hyper Terminal there is an error message COM3: ei voi avata. Tarkista porttiasetukset. (COM3: cannot open. Check port settings.)
The settings I have are 9600 bps, 8 databits, parity none, 1 stop bit, flow conrol hardware. This is the same both in the device driver settings and in the Hyper Terminal settings. It is 100% sure that the problem is somehow related to either Toshiba or Windows XP as the very same USB to RS232 converter works just perfectly and right at the very first time with e.g. Fujitsu ErgoPro having Windows 2000 (and that is a Pentioum 233 machine, so very old stuff indeed).
I can't get any help from Prolific, their home pages seem to be off-line now.

Hi
I have investigated a little bit in the net and it seems that this USB 1.1 to RS232 converter creates a virtual serial port (possibly the com 3)
As far as I know the built in modem uses the same port.
Possibly there could be compatibility problems.
However, this is not a Toshiba product and therefore I would recommend contacting the Prolific support.
I was on the website and its online.

HT1379 The USB ports on my 30" Cinema are not working. The monitor has not been used for a year or so, and the computer is a Mac Book Pro, 1012 model running OS Mavericks. I need to move the computer between two locations, and the other monitor is a 27"

The USB ports on my 30" Cinema HD display appear to not work. The monitor has not been used for almost a year, when I upgraded to a new Mac Book Pro and the 27" retina display. Now I need to move the computer back and forth between two locations using the two displays. The need for operating USB ports is essential. Any ideas. The display appears entirely normal. Am running OS X 10.9.

Disregard, problem solved.

USB devices on my M30X-118 do not work

Similar Messages

Maybe you are looking for