USB/directshow camera not visible in max/imaqdx
I've got a Chameleon USB2.0 camera from Point Grey and I'm having problems getting it to show up in MAX.
I'm running a fresh installation of labview 2012, MAX 5.3.3f2, IMAQdx 4.0, IMAQ 4.7 on a windows 7 x64 lenovo T420 laptop.
I'm aware of the problems with registering the DirectShow filters for the Point Grey cameras: http://digital.ni.com/public.nsf/allkb/7DF278AF77461951862579AD0063B9AD
I've tried all of the various driver versions from Point Grey, and currently have installed the v2.4 x86 version
The camera is visible using AMcap, a lightweight DirectShow viewer, so it seems that the camera is operational and the DirectShow interface is functional.
I had an older version of Labview installed, and the camera was visible in MAX. I wanted to upgrade versions but didn't use the NI update service and just downloaded the various files from the website. About the time I upgraded MAX to 5.3 the camera disappeared from MAX. I assumed some problem with the upgrade, so I completely uninstalled both Labview and the camera drivers and tried a fresh installation, but I still can't see the camera in MAX.
Any ideas about how to get my camera to show up in MAX?
Thanks!
Did you find anything? I have two Mightex USB cameras hooked up and believe that I might be having the same problem.
I can actually get both devices to show up in AMCAP, but the 2nd camera that I have hooked up to the computer doesn't show up in NI-MAX.
I have spoken with the camera manufacturer and they have verified that these DirectShow drivers have worked on old versions of LabVIEW. Please get back to me if you know anything regarding this error.
Similar Messages
-
USB/DirectShow camera not showing in NI-MAX
I've got a Point Grey Chameleon CMLN-13S2M USB 2.0 camera and it is not showing up in NI-MAX.
I'm well aware of the Directshow registration problems with the PGR cameras, and as far as I can tell the camera is properly registered. It shows up with no problems in AMCAP, a simple Directshow viewer, and also in Skype.
I just uninstalled the PGR drivers and spent a while going through the registry to delete all references I could to Point Grey and PGR. I then reinstalled the 32 bit version of the latest drivers, v2.5 beta 2. I also upgraded the camera firmware to the latest.
I'm running
Labview 2012 SP1 f2, 12.0.1
Vision development module 12.1.0
MAX 5.4.0f0
NI-IMAQ 4.7.2
NI-IMAQdx 4.1.0
Any ideas? This is a side project and I've been working on it off and on now for more than a year and I've got to get this camera working.
Solved!
Go to Solution.Yes, I still see the camera with other DirectShow viewers after the reinstall. The latest Point Grey drivers give the option to register the directshow drivers during the installation. I assumed that this worked since the camera shows up with the other DirectShow viewers, but I also manually registered the files according to the instructions in your links just in case.
I believe that a year or more ago ago when I was running an old version of LV (2009, I think) it did show up in MAX. I had upgraded a few of the LV components piecemeal, but when my university upgraded to 2012 I decided to uninstall and reinstall with the latest versions of everything. I have never seen it listed in MAX, red x or not, since I uninstalled the old version to upgrade.
I have used a camera from a different company and it worked fine.
I found that the 32bit directshow cameras are listed in the registry at
HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Wow6432Node\CLSID\{860BB310-5D01-11d0-BD3B-00A0C911CE86}\Instance
and I verified this by modifiying the "FriendlyName" registry key for the camera that does show up and observing that the name changes in MAX. The point grey camera is listed here in the registry but does not show up in MAX. -
IEEE 1394 Camera Not Visible in MAX
Problem Description :
I'm using the following hardware:
1. Texas Instrument OHCI Compliant IEEE 1394 Card ( Ratoc PCIFU2)
2. Basler 601f Camera ( NI certified)
(DCAM v.1.20 compliant)
Sofware :
1. LabView 7.0
2. Max 3.0
3. NI IMAQ for IEEE -1394 Ver 1.5
4. Vision Development MOdule 7.0
I am able to use the camera via Vision Assitant (7.0), but unable to see
the
camera listed in MAX. I have tried all the steps listed in FAQs.The driver
for
the camera is 1394imaq (i.e. all this has been checked).
I can run the 1394-Imaq vis & acquire images as well, but like i said no
camera listed in max ....
NI Software : LabVIEW version 7.0
NI Hardware : Other device
Driver Version :
OS : Windows 2000
Customer Info
rmation :
MK
[email protected]Hello,
It looks like the MAX provider for NI-IMAQ 1394 may have been corrupted. This can usually be fixed by running a repair on the installer. You can do this by running the installer from Add/Remove Programs.
Hope this helps!
Best Regards,
Yusuf C.
Applications Engineering
National Instruments -
NI PCI 5102 not visible in MAX
Hi all
I've got a problem on a testrig. I use a PCI 5102 high speed digitizer to acquire a signal. Since this morning, the acquisition and processing of this signal has slowed down and now it takes twice as long as before.
What could be the cause of this problem?
During searching for a solution on the system, I found that the device is not visible in MAX. Two weeks ago, I updated the testrig to LV8.0, which means that I made a single installer - more information to this can be found in this thread:
http://forums.ni.com/ni/board/message?board.id=170&message.id=164285&view=by_date_ascending&page=1
As said, I installed this approximately two weeks ago and it ran without any problems until this morning. So I wanted to test the card in MAX so that I maybe find something, but firstly it took a relative long time to open the Items and Interfaces node and secondly there was no item in. No PCI 5102, no Fieldpoint modules, no serial ports - although I use these devices in this app.
Is this maybe related to my original problem of the massively slowed down acquisition?
Any fast answer that helps to solve the problem is really highly appreciated, as this testrig is part of a production line.
Thomas
Using LV8.0
Don't be afraid to rate a good answer...Thomas,
I'm not sure why your 5102 measurements are slowing down, but I do have
a likely solution to your issues with MAX. Hopefully fixing MAX
will remedy both problems.
1) Browse to C:\Program Files\National Instruments\MAX. There is
a folder named "Data" that has the configuration info for MAX.
2) Delete the "Data" folder after making a copy on your desktop (it is
rare, but in some cases it may be useful to recover old
configurations). If Windows won't let you delete the folder, try
ending the nimxs.exe process from task manager. If you have any
tasks or scales saved in MAX, they will be deleted in this step.
3) Reboot your computer and open up MAX. This will force a
refresh of all configuration information for your system, and will most
likely clear up your problems with MAX.
Please let me know if this works for you, and if this fixes the issue
with your digitizer as well. If this doesn't help, there are
other debugging steps that we can try.
Thanks,
Travis W -
Mightex camera not identified by max or Imaq usb enumerate camera vi
Hi all,
I am using Mightex S-Series Ultra-Compact USB2.0 camera, I am finding it difficult to identify the camera in MAX or with IMAQ usb enumerate camera vi, I do have loaded the drivers but still couldnt get the camera working , please let me know if there is anything else I need to upload.
Thanks,
Ankit GuptaHi AnkitG,
Sorry to hear that you are having problems with your camera. We have recently seen several other instances of Mightex's cameras causing issues when trying to interface with it through IMAQdx, and have been in touch with Mightex regarding these issues. We suspect that the issues all come from differences in the way NI and Mightex handle DirectShow compliance. I'll make sure to communicate this issue to them as well, and I'll let you know what we find. -
Firewire camera not found in MAX on Windows 7
Hi all,
Used to run a firewire camera on Windows XP with no problems. Using version 8.6 and do not want to change this if at all possible. New lab PC runs windows 7 and firewire camera not found in NI MAX. The drivers associated with the camera are NI-IMAQdx IIDC...
NI-MAX does not even show a NI-IMAQdx camera and there is no way to add such a camera. The same issue arises for an AVT Guppy camera suggesting it is not camera dependent.
Has anyone any suggestions as how to rectify this. We have full development software v8.6 with all the appropriate drivers and modules required as it previously ran problem free on an XP machine.
Cheers,
leeserHi Leeser,
Which version of the driver did you previously have installed under Windows XP? It would be worth trying to re-install the latest version of the NI-IMAQdx driver. You will be able to install the Vision Acquisition Software 08.2010, which works with LabVIEW 8.5 and later (and installs NI-IMAQdx 3.7).
Regards,
Imtiaz Chowdhury
Head of Digital Technologies
Brand786 -
Hi -
I connected a 2TB external HDD (AC powered 3.5") via the USB port to the Airport extreme (5th gen.).. . The external HDD is OSX extended/journaled and has 800GB of stuff on it, but these files are not visible through the airport extreme network. I can read and write NEW files to this HDD, but cannot access any extisting/previous files...
Have not tried a powered USB hub yet - as my HDD is self-powered and SHOULD not require any additional power.
Any thoughts? Thanks!I have not tried a powered USB hub yet - as my HDD is self-powered and SHOULD not require any additional power.
I have 3 different hard drives, all with own separate power supplies, so they should work.
But none of them will work with AirPort Extreme unless I use a powered USB hub.
I cannnot say that this will help you, but it is worth a try if you have exhausted all other possibilities. -
Just installed 10.5.1 and iPhoto update.
When I connect my camera to my iMac, iPhoto opens....but the camera is not visible in the Finder !
Any suggestions ? Or is this a new bug?
Best regards,
RoelandYou are asking about iPhoto on your Mac, right? And not about iPhoto on your IOS device? This is the iPhoto on IOS forum. I have asked the community hosts to relocate your post to the iLife iPhoto forum - you will get more help there.
What is your iPhoto version? Assuming you are having iPhoto '11, you'd should see the photos in the iPhoto Library package using the Finder, if they are there; but dont move them, only browse them, if you can find them.
Reveal your iPhoto Library and in the Finder; it is probably in your "Pictures" folder, ctrl-click it, select "Reveal Package Contents". In the Finder window that will pop up, select the "Masters" folder. This scores the original images, organized by the date of the "Import Session" o f the event.
If your images are still there, I'd copy - not move! - them to a folder on your Desktop and then try to rebuild the iPhoto library. Make a backup of the iPhoto library, then hold down the key combionation option-command and select "rebuild database" from the dialog that pops up.
Regards
Léonie -
Goepel PXI-3220 not visible in MAX
I have installed 2 goepel pxi-3220 cards into a NI PXI-chassis. But there arent visible in MAX. The drivers in the windows device manager are present and working fine. I would like to have these two cards visible in MAX. Does anyone have any experience with these analogue output cards?
Hello,
Only devices that were produced using the VISA driver development Wizard are viewable in MAX. If the 3rd party manufacturer did not use our driver wizard, then the device will not show up in MAX. If that is the case, the card must come with a programming API and also some sort of configuration program. It sounds as though the drivers and are installed correctly since you see them in the device manager.
Regards,
Andrew M
National Instruments -
PC thinks my iPhone 3GS is a Digital Camera, not visible in Itunes
Hope someone can help
I bought the 3GS iPhone 32gb today and went to register on my PC and when connected to the uSB ports it was detected as a camera and only gives me the option of Photo Shop etc
It is also visible in 'My Computer' as a camera
I tried various USB ports as I believed only half where USB 2.0 the same happened after each restart, so I bought a new PCI USB 2.0 card and tried it through that with the same issue.
The Iphone works normally on another PC but obviously I want it to sync to my PC and Music
Latest version of Itunes installed
Restarted comp several times
Closed various security software on my PC temporarily
Any help much appreciatedkenny0_3 wrote:
Hope someone can help
I bought the 3GS iPhone 32gb today and went to register on my PC and when connected to the uSB ports it was detected as a camera and only gives me the option of Photo Shop etc
It is also visible in 'My Computer' as a camera
This is normal; it IS a digital camera, and this is how you get photos off it.
I tried various USB ports as I believed only half where USB 2.0 the same happened after each restart, so I bought a new PCI USB 2.0 card and tried it through that with the same issue.
The Iphone works normally on another PC but obviously I want it to sync to my PC and Music
Latest version of Itunes installed
Restarted comp several times
Closed various security software on my PC temporarily
Any help much appreciated
Open Task Manager (CTRLSHIFTESC), click on the Processes tab and the Image Name column to sort on name. Then look for AppleMobileDeviceService.exe (AMDS). If it is present then your problem is most likely a USB driver problem; try updating the USB drivers. If it is NOT present go to Control Panels, Administrative Tasks and launch Services. Find the entry for AMDS, right click on it and choose Start. -
AVT Marlin IEEE1394 camera not shown in MAX
Hi everybody,
i have an existing PXI system running with WinXP, a IEEE1394 camera and IMAQ for IEEE1394 and NI-Vision software. That runs fine. Now i am forced to update to Win7 and i try to get it run again...
I have a AVT Marlin IEEE1394 camera connected via a ExpressCard-FireWire adapter to my PXI system. The adapter is shown in Windows device manager under tree item "IEEE1394 Bus Hostcontroller" as "OHCI-compliant Texas Instruments1394 hostcontroller", the connected camera appears under tree item "NI IMAQ interfaces" as "NI-IMAQdx IIDC digital camera". But when i open NI-MAX the camera is not shown there. Under tree item "Devices and Interfaces" there are only the PXI chassis, COM, LPT, PCI-CommunicationController and NetworkDevices, but no camera. I installed the AVT driver package and got access to the camera with their demo tool, but with AVT driver the camera even does not appear in windows device manager. However is has to work with IMAQ.
Please help!!!
PXI-8105
Windows 7 SP1 (32 Bit)
Delock ExpressCard-to-FireWire adapter
AVT Marlin F-033C
MAX 5.5
NI Vision Aquisition 2013.09 Evaluation
IMAQdx 4.3
Solved!
Go to Solution.I had the same issue about 2 years ago and solved it by switching to the "OHCI Compliant IEEE 1394 Host Controller (legacy)". Details are given here.
-
Date stamp from mDV camera not visible on viewer , nor recorded.
Though the data code is pressed till the date and time stamp is visible on the camera Display,
it is not received by final cut pro.
For some projects they want some time and date stamped , sequences.
Can anything be done ?Date stamp data is not something read by FCP ... try iMovie,
Alternatively, check the camera's output options, it may be possible to output the data burnt-in on the s-video or some such ... if you have the requisite i/o hardware you could then digitize from that signal path -
USB connecting Handycam not visible for downloading footage
I have recently switched over to Mac and have discovered that iMovie will not open up footage from my DVD Handycam. It is asking me to use Firewire, but the Handycam is USB compatable. I am using the Sony CVD 803E with iMac G5 OS X (10.4.4). Does anyone have info on how to get around this.
Sony does have a FireWire connector, but they call it i.Link. Look for a VMC-IL4615 4.9" i.LINK™ Cable (4-pin to 6-pin)spacerVMC-IL4615
Cable. It's on their web site at:
http://www.sonystyle.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/SYDisplayProductInformation-Start?ProductSKU=VMCIL4615&Dept=cameras&CategoryName=a cc_DIAccessoriesi%2eLINKCables
Clay -
I have installed the MXI Express x1 kit in my PXI 1050. The computer doesn't boot. I disconnect the cable from the PXI rack and the PC boots. Looking through the forum I find a common thread about the MXI killing the PC boot. But I am not finding the BOOT-FIX, or the BOOT-Work-Around mentioned in the posts. The biggest curiosity is why the PCI card doesn't show up in the NI-Max inventory. Some of the dialog talks about "bus-mastering" another curiosity. Is this bus-mastering "Slot Specific" on the PC mother board? I remember back in the "old" PC days some options were not available except in the "first" slot. I inventoried the mother board and am posting the stats. I submitted a direct question to the engineering staff at NI. And with no answer in the first 24 hours, I am scouring the forum for any hint of a solution. We have burned up - fried - beat to death. 5 controllers in the last year. the bone yard is empty. How do I make this work? and thank you for your help...
Asus UEFI Bios Version 9901 x64 build date 02/28/2012
EC version MBECD-0006a
ME version 8.0.0.1351
South Bridge Stepping B3
CPU Intel Core i5-2500k @ 3.3GHz
Speed 3300 MHz
Memory 4096 (DDR3)
Mem Freq 13333 MHz
EM64T supported
Processor Stepping 206a7
Microcode Rev 25
Processor Cores 4
Windows 7 Professional 32Bit SP1I am having trouble with my devices working in my executable code. The code was provided by our test development department back in 2004. The errors are popup windows telling me the card didn't initialize. These cards are being called using DAQmx. I have nothing in my NI-MAX showing up as DAQmx. What is happening ?
// Initialisieren der SCXI-1104 iResult = DAQmxScxi1104_Voltage(&Scxi1104TaskHandle_global); CHK_TESTER_ERROR(ERROR_SCXI_1104_INIT) iResult = DAQmxStartTask(Scxi1104TaskHandle_global); CHK_TESTER_ERROR(ERROR_SCXI_1104_MEASUREMENT)
// Initialisieren der PXI-6052E AnalogOutputCH0 iResult = DAQmxPxi6052E_AnalogOutputCH0(&Pxi6052ETaskHandleAnalogOutputCH0_global); CHK_TESTER_ERROR(ERROR_MIO_6052E_INIT) iResult = DAQmxStartTask(Pxi6052ETaskHandleAnalogOutputCH0_global); CHK_TESTER_ERROR(ERROR_MIO_6052E_CONFIGURATION) // Initialisieren der PXI-6052E AnalogOutputCH1 iResult = DAQmxPxi6052E_AnalogOutputCH1(&Pxi6052ETaskHandleAnalogOutputCH1_global); CHK_TESTER_ERROR(ERROR_MIO_6052E_INIT) iResult = DAQmxStartTask(Pxi6052ETaskHandleAnalogOutputCH1_global); CHK_TESTER_ERROR(ERROR_MIO_6052E_CONFIGURATION)
// Konfigurieren der SCXI-1127 auf Independant sprintf(sRessourceScxiSwitch, "SC%dMod%d", iAdrChassis1_global, iAdrMatrix1_global); iResult = DAQmxSwitchSetTopologyAndReset(sRessourceScxiSwitch, DAQmx_Val_Switch_Topology_1127_Independent); CHK_TESTER_ERROR(ERROR_SCXI_1127_INIT)
Attachments:
SUT_SequencerFunctions.c 107 KB
scxi4.jpg 53 KB -
Usb Ext HD not visible on desktop
hi i have a Bipra 500GB Ext HD which is connected by USB 2 port. i use his as my time machine backup disk
It was visible and working till last night
now i cannot see it on the desk top although it's visible if i looki in disk utility and it is powered up ok .
I can't see why it's invisible ,
Advice would be appreciated
ThanksIf it shows up as gray in the Disk Utility, mount or repair it.
If it shows up as black in the Disk Utility, choose Preferences from the Finder menu, click on General, and check the box for it.
(114141)
Maybe you are looking for
-
I have a number of audiobooks purchased through iTunes on my iPod touch. Is there a way to move or download them to the Cloud so that I can access them on other devices?
-
When I click some of the apps that already in my Macbook Pro since the first time I bought this , it show up at the docks but in the next seconds it disappear and the apps won't opened . the apps that can't be opened are App Store , iMovie , PhotoBoo
-
Wndr4700 media router formatting hfs internal hard drive
Recently switched over to all macs in our house. I was thinking about getting a Netgear Wmdr4700 instead of a time capsule. The router utility can only format hard drives as ext4 which from what I've read is not read/write compatible with macs with
-
File Permission and HttpClient
I'm trying to use HttpClient to upload files with my applet. I'm signing my applet and can read files directly, but when I go to upload using HttpClient I get access denied errors: ERROR: java.security.AccessControlException access denied (java.io.Fi
-
How to provide a button in bsp that downloads data from SAP into powerpoint
hi, how to provide a button in bsp that downloads data from SAP into powerpoint this absurd requirement is needed by my client. thanks saad