USB disconnected while updating! Any help, please??
Hi.
I was updating my x10i to 2.3 yesterday when the usb cable got disconnected briefly from the phone. The phone turns on, displays the 'Sony Ericsson' logo, then displays a funny looking screen (like the colour stain u get on the screen of a cracked LCD). It does nothing apart from this, even after removing battery and trying again, etc. It doesnt progress any further. I'm assuming what i succeeded in doing was to 'brick' the phone?
What i've tried so far
I've tried using PC companion, but since the update was interrupted midway PC companion thinks the phone has 2.3. The repair option does not work, and neither does reinstall.
Can anyone please help me?? Any method at all, doesnt really matter as i've backed up all data.
try to update over the air by using wifi..
go to settings > about phone > software update
or use this software instead..
http://dl-www.sonyericsson.com/cws/download/1/110/61/1309763183/Update_Service_Setup-2.11.7.13.exe
Similar Messages
-
HT1222 What do I do if it says "there is an error while updating." Help please and thank you
What do I do if it says "there is an error while updating." Help please and thank you
Maybe this will help you; https://discussions.apple.com/docs/DOC-3551
-
HT4623 I can't connect to iTunes to update or download updates any help please ??
Any help please ??
Hi there,
You may want to take a look at the troubleshooting steps found in the article below.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
-Griff W. -
Error 4005 while restore. any help please?
i have iphone 4 ios 7.0 .
after replaced charger dock , turned on the iphone and it was stuck on apple .
then must make restore , i put the iphone on recovery mode , now there is 2 situations:
1 . when i make shift+restor for ios 7.0 firmware , i always get error 3194, even if i delete the apple line from the hosts file , or even if i remove the hosts file from its folder.
2. when i make restore + update for ios 7.0.2, get error 4005 .
i have windows 7 64bit , i tried also from old pc with windows xp 32bit, same error . i tried delete all backup files, same error .
i tried repair apple mobile support from control panel , same.
what can i do ????
please help me.
tnxtry to update over the air by using wifi..
go to settings > about phone > software update
or use this software instead..
http://dl-www.sonyericsson.com/cws/download/1/110/61/1309763183/Update_Service_Setup-2.11.7.13.exe -
HT4623 my phone keeps stalling during the restore and update any help please ?
Can anyone help me ive been at this all day and no luck?
Reset, hold both Home and Power buttons until the iPhone restarts. This usually takes about 10 seconds of holding both buttons. If still problem, charge your iPhone with Wall Charger for 10 minutes even if it does not show it is charging. Then you should Restore your iPhone with iTunes on computer. Here are simple steps. Open iTunes on computer. Connect iPhone to computer. Hold both home and power buttons until iTunes recognizes iPhone in Recovery Mode. Usually takes about 20 seconds of holding both buttons. Click Restore Button of iTunes.
-
I turned off the power to my apple tv whilst updating and now it will not work, i have tried to restore using usb but it says unable to find. any help please?
Welcome to the Apple Community.
Are you following these instructions.
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Source list, and then click Restore. -
I have an ipad3(wifi +cellular). Now i want to upgrade my iOS5.1 to ios 7. But download speed in our country is too slow(100kbps). It can be disconnected anytime. Is there any problem if net connection get disconnected while upgrading ios? Please ans me.
There is something Definitely wrong with iOS 7 regarding DATA USAGE being logged to wireless carrier in for WIFI instead.
I read all the previous replies and same issue.
I rarely use my mac to sync....its all wifi sync for the last 2 years....never had this issue before... and i know it began with iOS7.... here is why....
My iPhone was at home when I updated to iOS7 connected to wifi...but it logged Data Usage to Rogers Wireless (700MB approx)...data will never do an update over 50mb in app store (it gives the warning to use wifi) I play a lot of games and pay for them so I always update through App Store. 2 weeks later, simposons halloween update (650mb)...at home, using wifi.
Rogers told me there was 700+mb data usage on the day of update and 650+mb data on oct 1.st (tapped out).
Went over my 6GB plan and paid the fees.
This has never happened before...It must come to apples attention by now... -
I just updated my Iphone 3G and now it won´t work anymore. It wouldn´t even boot. It was just working for 3 sek. after the installation and now it shut itself down. Any help, please? Thankyou
I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
Identifying iPod models
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.
You also said: "It also will not let me download any music onto it." What happens when you try to sync music to the iPod? -
i have just upgraded my iphone 4 to a 5. and was trying to back my 4 up on the computure so i could get all my pics and music on to my 5. but its saying i need to update my itunes which i have tried to do and is still not working any help please i have been trying for hours
how is it not working?
what version of itunes?
what ios on iphone4?
does it give an error msg? -
Cannot get itunes 10.5.2x64 to install at all, 10.5.1x64 worked ok on my Vaio win7 laptop.The update totally screwed everything,
all I get is "the installer encountered errors before itunes could be configured.errors occured during installation.your system has not been modified."
Any help please!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!Praise God - I found the solution after hours of work: (1) Uninstall all Apple programs (itunes, Quicktime, Bonjour, .....); (2) Go to "Common Files" and delete all Apple files - this might be difficult for some are locked from you - you may have to change the "Owner" of the file in order to delete it - if that doesn't work "Rename the Apple Follder to something like Apple Old - that's like deleting it. Then download 10.5 from Apple and away you go - yippee.
-
I am trying to update iTunes to new version .
When it goes to install i get a message saying iTunes has an invalid signature and will not install.
Any help please.Go directly to Apple link to download
http://support.apple.com/kb/DL1426
Select "Save" instead of "Run". Once downloaded, double click the iTunesetup.exe to install. -
I have an ipad3(wifi +cellular). Now i want to upgrade my iOS5.1 to ios 7. But download speed in our country is too slow(100kbps). It can be disconnected anytime. Is there any problem if net connection get disconnected while upgrading ios? Please ans me.
haha, so now i'm thinking. I'm learning the terminal as fast as i can but there are several lines of codes and commands in there that throws up red flags to me that i don't fully understand. It just looks fishy too me. It would be highly appreciated if someone could just check this out just to tell me that i don't need to worry about it. Or point me in the right direction. I just feel un easy about this. ha.
-
My iMAC i7 will not see the device, it is from firewire to usb.
Any help please.The connection on the player is firewire
You need the following:
Apple Thunderbolt - Firewire adapter
4-pin to 9-pin Firewire cable like this one
No software drivers are needed.
No icon will appear on your Mac desktop when the deck is connected. You need to use video capture software such as iMovie, Final Cut, etc. in order to "see" and use your Firewire deck. (I believe QuickTime Player will also "see" your deck and allow playback.) You will probably have to use the manual controls on the deck to control actual playback start & stop.
I have recently bought a cable,firewire one end and USB on the other
Hard to believe there is such a cable. If there is such a cable, it's a scam. Firewire and USB are totally different, electrically and protocol-wise. Even if there is such a cable, it will not work for connecting your miniDV player to a Mac. miniDV (video) has always been a Firewire-based connection. Sony calls Firewire "i.Link" -
2 errors: "Your iPhone could not be activated because the activation server is temporarily unavailable" and the sim says "searching" while iTunes says there is "No Sim installed" - but of course, there is! Any help please??
Hi Peter,
Thank you for the note - I have seen similar replies on other posting errors and I see how that could make sense. The thing is, my iPhone is not jailbroken - it is from an authorized distributor. However, when I told them about the "no service" problem on the sim, they were unable to assist. Then my phone messaged that an itunes restore was required - so I did that, several times, to the error message now noted on my post. I wonder if there is some other way to over-write this message? Thanks very much. -
Cannot activate "find me" on my macbook air its says update recovery systeme. But I checked and i dont have any update. Help please!
Same problem here! MacBookPro with SSD. 10.7.2
Disk Utility didn't find any problems.
Maybe you are looking for
-
How to integrate bing map for including or displaying multiple locations at the same time
how to integrate bing map for including or displaying multiple locations at the same time
-
Confuse about the injecting entity in EJB 3.0?
Hi all, I have an customersBean which is inherit from customersRemote and my problem is i' am little confuse about injecting the entity(customer). Where can you apply the EntityManagerFactory is it outside on EJB or Inside the EJB? means outside EJB
-
Iphone not being recognised as a device on my laptop
HI, I currently have the iphone 4. I'm running the latest version of Itunes. I tried to connect my phone to update it and it comes up with an error as below: this iphone cannot be used because the apple mobile device service is not started. I have
-
Hi I currently update my iPad 2 to iOS, I had a number of films that purchased from my iPad from itunes, which are no longer in my iTunes or on my computer. How do I go about retrieving theses films?
-
IMac Intel 24" - Airport Wireless Rate
Here is my setup: 1 - 24" Intel iMac 2.33 / 2 GB (Located 10 feet across from AP against a wall, in a large apt complex) Avg rate 13mb. I typically sit in front of the computer in between the AP and the iMac, though I see this low transfer rate witho