USB Disk Mount Issues

I've been searching for quite some time and have so far been unable to come up with any helpful information.
I am attempting to move a directly attached USB external drive where my iTunes library is held, to my new Airport Extreme basestation, and repoint my library to the network share. I can see the drive mount as a sharepoint volume and am able to browse the disk. However,
It appears as though either my laptop or the airport has different cached mount points, as when I view the file system, I can see only part of my files, however when I directly attached the disk back to my laptop I can see all of them. I have a feeling this is something to do with the way OSX mounts disks as my drive is called "STORAGE" and if I check under /Volumes/ I now have STORAGE, STORAGE-1, STORAGE-2, STORAGE 1 all with different portions of my disk's file system.
I am unable to unmount those other volumes even when the disk is detached, and I can't locate the sharepoint volume, which is driving me a bit batty. Any else experience issues with the file's not being quite right when mounting drives on the airport as well?

I solved it by making an Automator application. Using actions for Files & Folders I added the following:
1. Get Specified Servers (You click add and choose the Airdisk in the left side of Finder)
2. Connect to Servers (connects to the server that you chose in previous command)
Thats it. Save the Automator work flow as an application. Put the app in your Applications Folder and add the app to your Login items in System Preferences > Accounts. Then your Airdisk will always be mounted after login without a Finder window pops up.

Similar Messages

Airport Extreme USB disk password issue fix ETA?

Many people who have a USB drive connected to their Airport Extreme 802.11n have had problems where it repeatedly asks for the password to connect to the USB disk, but never allows you access until you reboot the router. This has been an issue for some time that I've had to just endure intermittently. Is there any ETA on Apple FINALLY fixing that issue?
Also, is there any relief for anyone that bought this Airport Extreme w/o gigabit ethernet a month and a half ago and got screwed by Apple ONCE AGAIN for being one of their early-adopters? Its really exhausting having Apple bring out a new version that should have been the first version w/o any notice of any kind. Personally, since all of Apple's computers had gigabit ethernet ports I assumed their flagship router supported their computers. I didn't realize until after it was too late. :-/ They should have just said "hey, here's a crippled router. you can buy this now even though its half finished or we'll bring out the real one for the same price in a few months. thanks -steve" so I could have gotten a crappy linksys to hold me over. :-/
Anywho...any firmware updates in the works to let me predictably connect to my USB drive or am I forgotten and unappreciated again?
(PS - Thanks for iPhone video out! That should have been in the original release and I was really worried that iPhone2 was going to come out in October or something and have that w/ the 16GB storage it should have sported too. :-D )
-Alex

Oops. This shouldn't have been in the "for Windows" section, sorry...didn't know they were segregated this way. :-| Why would anyone buy an Airport to use with Windows machines? :-/ That's like putting a beautifully manicured luxury brick roadway through a ghetto--it may look great, but it's only going to be used to transport crap.
(before I have to explain this to someone, lol, crap=the viruses and trojans and spy/adware that make surfing the web almost impossible--or the myriad programs that are needed to stop it that suck up so much precious resources that it's almost better to let the viruses in and the IE popups pop away)
:-D

Inconsistent Airport USB disk mounting patterns

I have two Airport Extreme networks -- one at home and one in my office at work. I access both networks with a MacBook. Fine so far.
I also have an Iomega USB disk attached to the APE at home and an identical disk attached to my APE at work. The disk at home mounts nicely on my desktop. However, the disk at school does not mount. Connection proceeds to the point where I type in the password, but it does not mount, and I get the volume "__" could not be mounted message. This message appears regardless of which user account I work.
So, the Airport disk mounts fine at home but does not mount at my office. I've spent several hours deleting preference files, mucking around with the Airport Utility, etc. No go. Restarting the APE at work sometimes gives short-lived success, but it does not seem to last.
Any suggestions?

Okay, after reading several other discussion posts, the best workaround I've been able to find is to mount the Airport Disk through the Connect to Server menu. You'll need to know the IP address of your AirPort. It's probably either 10.0.1.1 or something like 192.168.0.1 -- you can find it by running AirPort Utility from the Utilities folder. Just click on your AirPort base station on the left side and the utility should say what the IP address of your base station is. (You can then quit AirPort Utility.)
Then press cmd-K, OR from the Finder click on the Go menu and then select Connect to Server...
In the "Server Address" box, type smb://AEBS-IP-adress/Volume-name
For example, in my setup, I connect to smb://10.0.1.1/Iomega because my AirPort Extreme Base Station has an IP address of 10.0.1.1 and the name of the drive I have connected to my AEBS is called "Iomega" The volume should now mount and show up in the Toolbar of any Finder window. It does NOT show up as a separate volume on my desktop, but your mileage may vary.
This has worked for me each time I've tried it and is much more reliable than trying to select my AEBS from the "Shared" option in the Toolbar of the Finder window.
BTW: If you will be doing this regularly, you may want to go back to the Connect to Server menu and click the + button to add it as one of your favorite servers.

Problems with Airport Extreme Firmware 7.6.1. and Time Machine Backups to USB Disks

I found that when I upgraded to Firmware 7.6.1 my Airport Extreme was no longer able to maintain afp server connections to USB disks mounted to the APE. If I power cycled the APE it would work for a while and then fail again. This even applied for connectins on gigabit ethernet, not just wifi. Consequently my Time Machine backups became unusable. Rolling back to 7.6 fixed it, but I permanently fixed this by changing the IPv6 mode from "Automatic" to "Host". No problems since then.

I hate to have to tell you this, but backing-up that way is unreliable and not supported by Apple. See: Using Time Machine with an Airport Extreme Air Disk.

USB 2.0 Mass Storage Device mounting issues and cannot write data on it

I have a 250 GB external Simpletech Hard Drive (with a USB 2.0 interface). It works flawlessly in a Windows XP environment (strange!!). But when I connect it to my iMac thru the USB port 2 things happen:
1. Sometimes it mounts, sometimes it does not. It's just capricious. If I boot the system with the USB device attached it mounts. If I connect it "hot", sometimes it does, sometimes it doesn't. Sometimes it does not appear as mounted...I disconect the device and the Mac gets angry.
2. I can read all the data on the disk, but I can't write any. That is, I cannot use it for backing up any iMac data. The backup utility won't recognize the device either.
I've seen people going thru the mounting issue (not sure if there is a solution), but I am puzzled about the inability to write data on the hard drive. I am wondering if this is due to a formatting incopatibility? Any hints??
iMac Mac OS X (10.4.10) 2.33 GHz, 2GB, 750 GB

For both the Mac and a Windows PC, format it as 'MS-DOS'.
Both platforms can read/write to it. A Windows PC is not capable of reading/writing to a Mac formatted (HFS, HFS+) disk without additional software.
MacFixit has been covering some apparent USB issues which may or may not help you. http://www.macfixit.com/
I'm still at a loss. I have yet to experience or reproduce the USB issues that a number of users seem to be having. Now that I have sufficient free time, I may look into it.

IBM x31 pcmanfm LXDE usb disk and sound issue

How can I auto mount external USB disk
my daemon list looks like this
DAEMONS=(@syslog-ng @hal @network @net-profiles @netfs @crond @fam slim)
and modules look like this
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(e100 eepro100 mii slhc rt2x00lib rt2x00pci rt61pci ac97_bus snd-mixer-oss snd-pcm-oss snd-page-alloc snd-pcm snd-timer snd snd-ac97-codec snd-intel8x0 snd-intel8x0m soundcore vboxdrv)
Also I am not able to hear no sound, I am in the audio group and ive seen channels through alsamixer
anyone else having issues
Last edited by venky80 (2009-01-22 04:16:08)

Hello Eugene,
Interesting - possible - coincidence. I just posted about a similar seeming issue here:
<http://discussions.apple.com/thread.jspa?messageID=10425731#10425731>
Notice that I've checked Disk Utility's repairs report as well as the System Log with Console: both show mention of USB related items.
This may not have anything to do with your issue but I thought it worth mentioning.

USB thumb drive mounting issues in Lion?

Hi all,
I just installed Lion on my mid-2010 13" MacBook Pro a couple of days ago. All seemed to be going great until I tried to use my USB thumb drives. I have four of these (3 Sandisk and 1 Imation), and none will mount. When I go into Disk Utility I can see them, but when I try to mount them manually the response is "Mount Failed" and some text regarding running Disk First Aid. However, even when I repair the volume, it still won't mount. This happens with all four drives, and I used them all without incident a few days ago when I still had Snow Leopard installed. They are all formatted for FAT32. I've seen a few scattered messages about USB and NTFS mounting issues, but it appears to be an isolated problem. Anybody else having this issue? If so, are there any workarounds? I'd hate to have to revert back to Snow Leopard just to use my thumb drives.

Try to use the disk utility an format one of your Thumb Drive, and see if it can mount.

Force Mount Point for USB disk drive

I need to force my 2TB usb drive to mount at the same mount point every time I log on or after I reboot the machine it seems to change - /Volumes/data, /Volumes/Data 1, ...
Can someone offer a solution?

Just to make sure I'm understanding this correctly....the iTunes library files (iTunes Library.itl and iTunes Music Library.xml) are currently located in my "My Documents\My Music\iTunes" folder. So, first I should delete the .xml file, right?
Then, you say to change my preferences and redirect iTunes to the new location of my songs (on the external USB drive). So, I would change the current setting of "C:\Documents and Settings\Jim\My Documents\My Music\iTunes\iTunes Music" to now point to the location of the new drive "I:\mp3" ?
What happens to the .itl file left behind in the old location? ...and all the directories with all my album art....I dont' want to lose that stuff.
Sorry, but I'm just a bit confused...well, a lot confused about where these files will be located. Before, my iTunes was configured with the iTunes music folder locations to be: "C:\Documents and Settings\Jim\My Documents\My Music\iTunes\iTunes Music" and all my mp3s were stored on the external USB disk drive....no music was in the iTunes Music folder. This config also put the library files in the \My Music\iTunes folder.
With making the changes you suggest will the library files and all the music now be on the external drive? The reason I ask is that I read some other posts from people that had everything on the external drive and if they had issues with their system connecting to the external drive, then iTunes would create a new library on the C drive and not let the user know.
Thanks for your patience in trying to explain this to me.

USB disk won't mount on startup (have tried everything)

Hi!
I'm having big problems getting my USB disk to mount on startup.:(
It used to work perfectly by having 'mount /dev/sdc1 /media/disk' in rc.local (and umount in local.shutdown) but recently it started saying that 'filesystem type must be defined' (or something like that). So I changed the line to 'mount -t ext3 /dev/sdc1 /media/disk' but now I get a message that '/dev/sdc1 does not exist'.
So I decided to get this fixed in fstab once and for all.
I checked the designations of the disks with 'fdisk -l' and noticed that the USB disk would alternate between /dev/sdc, /dev/sde and /dev/sdd quite random on every reboot. In other words I couldn't mount it in fstab by using one of those paths cause I'd get the same problem with '/dev/sdc or -e or -d does not exist'. I figured the sollution must be to mount the disk by using UUID. I checked the uuid's and got the following (as you can see the USB disk is on this reboot registered as '/dev/sde'):
bash-3.2$ ls -l /dev/disk/by-uuid/
total 0
lrwxrwxrwx 1 root root 10 2009-02-07 11:56 6cf5e803-429a-44c3-bcf9-0f007df623f3 -> ../../sda1
lrwxrwxrwx 1 root root 10 2009-02-07 11:56 8ef6be20-ee30-4a00-8946-56a4d94a7245 -> ../../sda3
lrwxrwxrwx 1 root root 10 2009-02-07 11:56 947b3b86-8501-4011-9da2-4de45eb4ed60 -> ../../sda2
lrwxrwxrwx 1 root root 10 2009-02-07 11:56 94911fb3-def7-4440-b6a5-5e09f91b19f6 -> ../../sde1
lrwxrwxrwx 1 root root 10 2009-02-07 11:56 acd197d3-f63e-48f9-88de-41eff1b3b425 -> ../../sda4
lrwxrwxrwx 1 root root 10 2009-02-07 11:56 b6745703-bde6-44ef-865d-d09501ecc8ab -> ../../sdb1
I other words the UUID of the disk should be '94911fb3-def7-4440-b6a5-5e09f91b19f6' so I added that to the fstab file, but I still get the same error that the disk doesn't exist. How is this possible? Isn't the UUID supposed to be the same no matter what? When the disk is clearly labeled with this UUID every time I check it why can't it be used in fstab??
Here's my fstab (I've commented out the lines that I've been trying out):
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults 0 0
/dev/cdrom /mnt/cdrom iso9660 ro,user,noauto,unhide 0 0
/dev/dvd /mnt/dvd udf ro,user,noauto,unhide 0 0
/dev/sda1 /boot ext2 defaults 0 1
/dev/sda2 / ext3 defaults 0 1
/dev/sda3 /var reiserfs defaults 0 1
/dev/sda4 /home ext3 defaults 0 1
/dev/sdb1 /extra ext3 defaults 0 1
#/dev/sdc1 /media/disk defaults 0 0
#UUID=94911fb3-def7-4440-b6a5-5e09f91b19f6 /media/disk defaults 0 0
What am I doing wrong here? I've also tried to use different options like 'rw,auto,exec' but it won't work.

It seems I'm able to mount the disk from the terminal by doing '# sudo mount UUID=94911fb3-def7-4440-b6a5-5e09f91b19f6 /media/disk'.
But this only works when I do it manually. Adding 'mount UUID=94911fb3-def7-4440-b6a5-5e09f91b19f6 /media/disk' to rc.local only gives the error that filesystem must be defined and when it's defined I get the error that device is not found.
How can it work manually, but not in fstab or rc.local?
Here's my dmesg:
BIOS EBDA/lowmem at: 0009f800/0009f400
Linux version 2.6.28-ARCH (root@T-POWA-LX) (gcc version 4.3.3 (GCC) ) #1 SMP PREEMPT Mon Feb 2 22:22:59 UTC 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fef0000 (usable)
BIOS-e820: 000000007fef0000 - 000000007fef3000 (ACPI NVS)
BIOS-e820: 000000007fef3000 - 000000007ff00000 (ACPI data)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
DMI 2.4 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
last_pfn = 0x7fef0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009f400 (usable)
modified: 000000000009f400 - 00000000000a0000 (reserved)
modified: 00000000000f0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000007fef0000 (usable)
modified: 000000007fef0000 - 000000007fef3000 (ACPI NVS)
modified: 000000007fef3000 - 000000007ff00000 (ACPI data)
modified: 00000000e0000000 - 00000000f0000000 (reserved)
modified: 00000000fec00000 - 0000000100000000 (reserved)
kernel direct mapping tables up to 377fe000 @ 10000-16000
RAMDISK: 7fe0e000 - 7fedf2e4
Allocated new RAMDISK: 0055f000 - 006302e4
Move RAMDISK from 000000007fe0e000 - 000000007fedf2e3 to 0055f000 - 006302e3
ACPI: RSDP 000F8600, 0014 (r0 HP-CPC)
ACPI: RSDT 7FEF3040, 0038 (r1 HP-CPC AWRDACPI 42302E31 AWRD 0)
ACPI: FACP 7FEF30C0, 0084 (r2 HP-CPC AWRDACPI 42302E31 AWRD 0)
ACPI: DSDT 7FEF31C0, 3C55 (r1 HP-CPC AWRDACPI 1000 MSFT 100000E)
ACPI: FACS 7FEF0000, 0040
ACPI: SSDT 7FEF6F40, 01CA (r1 HP-CPC POWERNOW 1 LTP 1)
ACPI: SRAT 7FEF7180, 00A0 (r1 HP-CPC HAMMER 1 AMD 1)
ACPI: MCFG 7FEF7280, 003C (r1 HP-CPC AWRDACPI 42302E31 AWRD 0)
ACPI: APIC 7FEF6E80, 0068 (r1 HP-CPC AWRDACPI 42302E31 AWRD 0)
ACPI: Local APIC address 0xfee00000
1158MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 00000000 - 377fe000
bootmap 00012000 - 00018f00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 000055b520] TEXT DATA BSS ==> [0000100000 - 000055b520]
#4 [000055c000 - 000055f000] INIT_PG_TABLE ==> [000055c000 - 000055f000]
#5 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
#7 [000055f000 - 00006302e4] NEW RAMDISK ==> [000055f000 - 00006302e4]
#8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
found SMP MP-table at [c00f46e0] 000f46e0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0007fef0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0007fef0
On node 0 totalpages: 523903
free_area_init_node: node 0, pgdat c0406600, node_mem_map c1000200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 2318 pages used for memmap
HighMem zone: 294372 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
SB4X0 revision 0x11
Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000)
PERCPU: Allocating 36864 bytes of per cpu data
NR_CPUS: 16, nr_cpu_ids: 2, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519809
Kernel command line: root=/dev/sda2 ro quiet
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Fast TSC calibration using PIT
Detected 2188.552 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Scanning for low memory corruption every 60 seconds
Memory: 2072040k/2096064k available (2227k kernel code, 22632k reserved, 1026k data, 332k init, 1186760k highmem)
virtual kernel memory layout:
fixmap : 0xffee8000 - 0xfffff000 (1116 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc0433000 - 0xc0486000 ( 332 kB)
.data : 0xc032cfd9 - 0xc042db5c (1026 kB)
.text : 0xc0100000 - 0xc032cfd9 (2227 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 4378.48 BogoMIPS (lpj=7295173)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20080926
ACPI: Checking initramfs for custom DSDT
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 01
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4379.66 BogoMIPS (lpj=7295468)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 01
Brought up 2 CPUs
Total of 2 processors activated (8757.15 BogoMIPS).
net_namespace: 768 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: reg 18 io port: [0x4100-0x411f]
pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff]
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:12.0: reg 10 io port: [0xfe00-0xfe07]
pci 0000:00:12.0: reg 14 io port: [0xfd00-0xfd03]
pci 0000:00:12.0: reg 18 io port: [0xfc00-0xfc07]
pci 0000:00:12.0: reg 1c io port: [0xfb00-0xfb03]
pci 0000:00:12.0: reg 20 io port: [0xfa00-0xfa0f]
pci 0000:00:12.0: reg 24 32bit mmio: [0xfe02f000-0xfe02f1ff]
pci 0000:00:12.0: reg 30 32bit mmio: [0x000000-0x07ffff]
pci 0000:00:12.0: supports D1 D2
pci 0000:00:13.0: reg 10 32bit mmio: [0xfe02e000-0xfe02efff]
pci 0000:00:13.1: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff]
pci 0000:00:13.2: reg 10 32bit mmio: [0xfe02c000-0xfe02cfff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
pci 0000:00:14.0: reg 10 io port: [0x500-0x50f]
pci 0000:00:14.0: reg 14 32bit mmio: [0xfe02b000-0xfe02b3ff]
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
pci 0000:00:14.1: reg 20 io port: [0xf800-0xf80f]
pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
pci 0000:01:00.0: reg 1c 64bit mmio: [0xfb000000-0xfbffffff]
pci 0000:01:00.0: reg 24 io port: [0xef00-0xef7f]
pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:00:02.0: bridge io port: [0xe000-0xefff]
pci 0000:00:02.0: bridge 32bit mmio: [0xfa000000-0xfcffffff]
pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:02:01.0: reg 10 io port: [0xdf00-0xdfff]
pci 0000:02:01.0: supports D1 D2
pci 0000:02:03.0: reg 10 io port: [0xde00-0xdeff]
pci 0000:02:03.0: reg 14 32bit mmio: [0xfdeff000-0xfdeff0ff]
pci 0000:02:03.0: reg 30 32bit mmio: [0x000000-0x00ffff]
pci 0000:02:03.0: supports D1 D2
pci 0000:02:03.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:02:03.0: PME# disabled
pci 0000:02:04.0: reg 10 32bit mmio: [0xfdefe000-0xfdefe7ff]
pci 0000:02:04.0: reg 14 io port: [0xdd00-0xdd7f]
pci 0000:02:04.0: supports D2
pci 0000:02:04.0: PME# supported from D2 D3hot D3cold
pci 0000:02:04.0: PME# disabled
pci 0000:00:14.4: transparent bridge
pci 0000:00:14.4: bridge io port: [0xd000-0xdfff]
pci 0000:00:14.4: bridge 32bit mmio: [0xfde00000-0xfdefffff]
pci 0000:00:14.4: bridge 32bit mmio pref: [0xfdd00000-0xfddfffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 *11)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
PCI: Using ACPI for IRQ routing
pci 0000:00:00.0: BAR 3: can't allocate resource
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:09: mem resource (0xf0000-0xf3fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:09: mem resource (0xf4000-0xf7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:09: mem resource (0xf8000-0xfbfff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:09: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:09: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:09: mem resource (0x100000-0x7feeffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: ioport range 0x228-0x22f has been reserved
system 00:01: ioport range 0x40b-0x40b has been reserved
system 00:01: ioport range 0x4d6-0x4d6 has been reserved
system 00:01: ioport range 0xc00-0xc01 has been reserved
system 00:01: ioport range 0xc14-0xc14 has been reserved
system 00:01: ioport range 0xc50-0xc52 has been reserved
system 00:01: ioport range 0xc6c-0xc6d has been reserved
system 00:01: ioport range 0xc6f-0xc6f has been reserved
system 00:01: ioport range 0xcd4-0xcdf has been reserved
system 00:01: ioport range 0x4000-0x40fe has been reserved
system 00:01: ioport range 0x4210-0x4217 has been reserved
system 00:06: ioport range 0x4d0-0x4d1 has been reserved
system 00:06: ioport range 0x800-0x87f has been reserved
system 00:08: iomem range 0xe0000000-0xefffffff has been reserved
system 00:09: iomem range 0x7ff00000-0x7fffffff has been reserved
system 00:09: iomem range 0x7fef0000-0x7fefffff could not be reserved
system 00:09: iomem range 0xffff0000-0xffffffff has been reserved
system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:09: iomem range 0xfff80000-0xfffeffff has been reserved
pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
pci 0000:00:02.0: IO window: 0xe000-0xefff
pci 0000:00:02.0: MEM window: 0xfa000000-0xfcffffff
pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:14.4: PCI bridge, secondary bus 0000:02
pci 0000:00:14.4: IO window: 0xd000-0xdfff
pci 0000:00:14.4: MEM window: 0xfde00000-0xfdefffff
pci 0000:00:14.4: PREFETCH window: 0x000000fdd00000-0x000000fddfffff
pci 0000:00:02.0: setting latency timer to 64
bus: 00 index 0 io port: [0x00-0xffff]
bus: 00 index 1 mmio: [0x000000-0xffffffff]
bus: 01 index 0 io port: [0xe000-0xefff]
bus: 01 index 1 mmio: [0xfa000000-0xfcffffff]
bus: 01 index 2 mmio: [0xd0000000-0xdfffffff]
bus: 01 index 3 mmio: [0x0-0x0]
bus: 02 index 0 io port: [0xd000-0xdfff]
bus: 02 index 1 mmio: [0xfde00000-0xfdefffff]
bus: 02 index 2 mmio: [0xfdd00000-0xfddfffff]
bus: 02 index 3 io port: [0x00-0xffff]
bus: 02 index 4 mmio: [0x000000-0xffffffff]
NET: Registered protocol family 2
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 836k freed
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1732
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:00.0: MSI quirk detected; MSI disabled
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:02.0: setting latency timer to 64
pcieport-driver 0000:00:02.0: found MSI capability
pci_express 0000:00:02.0:pcie00: allocate port service
pci_express 0000:00:02.0:pcie01: allocate port service
pci_express 0000:00:02.0:pcie03: allocate port service
aer 0000:00:02.0:pcie01: AER service couldn't init device: no _OSC support
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver4 ports, IRQ sharing disabled
input: Macintosh mouse button emulation as /class/input/input0
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 332k freed
SCSI subsystem initialized
libata version 3.00 loaded.
pata_acpi 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
scsi0 : pata_atiixp
scsi1 : pata_atiixp
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf800 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf808 irq 15
ata2.00: ATAPI: HP DVD Writer 740b, ED24, max UDMA/33
ata2.00: configured for UDMA/33
scsi 1:0:0:0: CD-ROM HP DVD Writer 740b ED24 PQ: 0 ANSI: 5
sata_sil 0000:00:12.0: version 2.3
scsi2 : sata_sil
scsi3 : sata_sil
ata3: SATA max UDMA/100 mmio m512@0xfe02f000 tf 0xfe02f080 irq 22
ata4: SATA max UDMA/100 mmio m512@0xfe02f000 tf 0xfe02f0c0 irq 22
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7
ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/100
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATA-7: WDC WD2500JS-60MHB1, 10.02E01, max UDMA/100
ata4.00: 488397168 sectors, multi 16: LBA48
ata4.00: configured for UDMA/100
scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
scsi 3:0:0:0: Direct-Access ATA WDC WD2500JS-60M 10.0 PQ: 0 ANSI: 5
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe02c000
Driver 'sd' needs updating - please use bus_type methods
sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:<6>ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: irq 19, io mem 0xfe02e000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 19, io mem 0xfe02d000
sda1 sda2 sda3 sda4
sd 2:0:0:0: [sda] Attached SCSI disk
sd 3:0:0:0: [sdb] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdb] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 3:0:0:0: [sdb] Attached SCSI disk
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
usb 1-7: new high speed USB device using ehci_hcd and address 5
usb 1-7: configuration #1 chosen from 1 choice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram
usb 2-2: new low speed USB device using ohci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
8139too Fast Ethernet driver 0.9.28
8139too 0000:02:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
eth0: RealTek RTL8139 at 0xf8182000, 00:13:d3:88:fb:ec, IRQ 20
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
lirc_dev: IR Remote Control driver registered, major 61
lirc_mceusb2: Philips eHome USB IR Transceiver and Microsoft MCE 2005 Remote Control driver for LIRC $Revision: 1.44 $
lirc_mceusb2: Daniel Melander <[email protected]>, Martin Blatter <[email protected]>
usbcore: registered new interface driver lirc_mceusb2
usb 3-1: new full speed USB device using ohci_hcd and address 2
C-Media PCI 0000:02:01.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
usb 3-1: configuration #1 chosen from 1 choice
input: Power Button (FF) as /class/input/input1
usb 3-1: reset full speed USB device using ohci_hcd and address 2
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input2
ACPI: Power Button (CM) [PWRB]
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
processor ACPI_CPU:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
lirc_dev: lirc_register_plugin: sample_rate: 0
lirc_mceusb2[2]: Philips eHome Infrared Transceiver on usb3:2
usb 3-2: new low speed USB device using ohci_hcd and address 3
usb 3-2: configuration #1 chosen from 1 choice
usb 3-4: new full speed USB device using ohci_hcd and address 4
usb 3-4: configuration #1 chosen from 1 choice
Linux agpgart interface v0.103
usbcore: registered new interface driver hiddev
scsi 1:0:0:0: Attached scsi generic sg0 type 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: Attached scsi generic sg2 type 0
input: Logitech HID compliant keyboard as /class/input/input3
generic-usb 0003:046D:C30E.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:13.0-2/input0
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
input: Logitech HID compliant keyboard as /class/input/input4
generic-usb 0003:046D:C30E.0002: input,hidraw1: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:13.0-2/input1
input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /class/input/input5
generic-usb 0003:045E:0047.0003: input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:13.1-2/input0
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
nvidia: module license 'NVIDIA' taints kernel.
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x500, revision 0
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
input: PC Speaker as /class/input/input6
Initializing USB Mass Storage driver...
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
scsi5 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
ohci1394 0000:02:04.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[fdefe000-fdefe7ff] Max Packet=[2048] IR/IT contexts=[4/8]
Error: Driver 'pcspkr' is already registered, aborting...
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
nvidia 0000:01:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module 180.22 Tue Jan 6 09:29:08 PST 2009
EXT3 FS on sda2, internal journal
ReiserFS: sda3: found reiserfs format "3.6" with standard journal
ReiserFS: sda3: using ordered data mode
ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda3: checking transaction log (sda3)
ReiserFS: sda3: Using r5 hash to sort names
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc0000bc42b8]
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
scsi 5:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
sd 5:0:0:0: [sdc] Attached SCSI removable disk
sd 5:0:0:0: Attached scsi generic sg3 type 0
scsi 5:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
scsi 4:0:0:0: Direct-Access ST316002 3A 8.01 PQ: 0 ANSI: 0
sd 5:0:0:1: [sdd] Attached SCSI removable disk
sd 5:0:0:1: Attached scsi generic sg4 type 0
scsi 5:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
sd 4:0:0:0: [sde] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 03 00 00 00
sd 4:0:0:0: [sde] Assuming drive cache: write through
sd 4:0:0:0: [sde] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 03 00 00 00
sd 4:0:0:0: [sde] Assuming drive cache: write through
sde: sde1
sd 4:0:0:0: [sde] Attached SCSI disk
sd 4:0:0:0: Attached scsi generic sg5 type 0
usb-storage: device scan complete
sd 5:0:0:2: [sdf] Attached SCSI removable disk
sd 5:0:0:2: Attached scsi generic sg6 type 0
scsi 5:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
sd 5:0:0:3: [sdg] Attached SCSI removable disk
sd 5:0:0:3: Attached scsi generic sg7 type 0
usb-storage: device scan complete
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
kjournald starting. Commit interval 5 seconds
EXT3 FS on sde1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
TCP(wget:15427): Application bug, race in MSG_PEEK.
TCP(wget:18681): Application bug, race in MSG_PEEK.
TCP(wget:4122): Application bug, race in MSG_PEEK.
TCP(wget:4275): Application bug, race in MSG_PEEK.
TCP(wget:19451): Application bug, race in MSG_PEEK.

Cannot mount USB disk in SIngle-user mode (solaris 10)

Hi all ,
I need some help please :
I can read/write to my USB disks when i'm in muti-user mode but when to I swith to single-user mode ( init S ), I cannot mount it.
in Single-user mode , i started volume management daemon :
#/etc/init.d/volgmt start
#volcheck
but i'm still not able to mount it.
I tried to mount manually:
#mount /dev/dsk/c2t0d0p0 /testpoint , i have this error: < mount : not a UFS magic number ( 0x0) , dev/dsk/c2t0d0p0 is not of this fstype.
My system recognizes the USB device though in single-user mode:
This is an output of #iostat -En
c2t0d0 Soft Errors: 1 Hard Errors: 0 Transport Errors: 0
Vendor: BUFFALO Product: ClipDrive Revision: 2.00 Serial No:
Size:0.07GB <65339392 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 1 Predictive Failure Analysis: 0

Hi ,
thanks for your advice. My problem is resolved.
The USB drive was actually a FAT filesystem.
so I did # mount -F pcfs /dev/dsk/c2t0d0p0:c /testpoint and everything went fine
I can read/write to my USB disks when i'm in
muti-user mode but when to I swith to single-user
mode ( init S ), I cannot mount it.
in Single-user mode , i started volume management
daemon :
/etc/init.d/volgmt start
#volcheck
but i'm still not able to mount it.It probably requires other items to be started
first.
I tried to mount manually:
#mount /dev/dsk/c2t0d0p0 /testpoint , i have
this
error: < mount : not a UFS magic number ( 0x0) ,
dev/dsk/c2t0d0p0 is not of this fstype.
Looks like it's assuming UFS. If this is a pcfs
filesystem, give it the type on the mount line.
# mount -F pcfs /dev/dsk/c2t0d0p0 /testpointYeah, this was the right command, I had to specify option < -F pcfs >.
but I read somethere on this forum i had to specify :c as the drive for FAT at the end of c2t0d0p0 , so the full command was:
# mount -F pcfs /dev/dsk/c2t0d0p0:c /testpoint
>
DarrenThanks,
Sakolan.

Mount usb disk after boot

Hi,
How can I mount automatically an usb disk after boot?
Any suggestion would be appreciated.
Thanks

Read this fine article and use it to set up a udev rule, to specifically name the device. (Otherwise you may never know where it pops up in the disk naming scheme.)
Also note -- after reading the article -- there are plenty of examples of rules in /etc/udev/ files that may further help.

Can't mount USB disk with the atribute of fix and read-only

Hello All,
I have a usb disk which is set as fix(non-removalbe) and read-only. I tried to connect it to Macbook version 10.4.11 ,but it failed to mount the disk. However, connecting to 10.5.X and windows XP work fine. I am wondering is it a bug specifically in 10.4.11 only ? Could I get any patch for this problem ?
Thanks,
Ying

HI Ying and Welcome to Apple Discussions ...
Try repairing disk permissions.
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac.
Carolyn

GNOME, nautilus, devicekit-disks: mount USB disk

Hi,
I recently upgraded and have now nautlius 2.28.2-1 together with devicekit-disks 009-1 installed.
As usual mounting/unmounting USB disks in nautilus stopped working. I searched the wiki, forums, bugs and google to gather information about this topic, but you know ...
When I try to mount a disk (they all show up in nautilus) nautilus pops up an error declaring me "Not Authorized". After quite some reading I think nautilus now uses devicekit-disks to actually mount my USB disks, so I tried to mount it with devicekit-disks:
[resi@nomad ~]$ devkit-disks --mount /dev/sdc
Mount failed: Not Authorized
In older versions of nautilus I used to edit some files in /etc to grant myself permissions (PolicyKit.conf), but this does not work anymore.
I found a hint and edited /usr/share/polkit-1/actions/org.freedesktop.devicekit.disks.policy (this one is coming with devicekit-disks) and modified the default for the actions org.freedesktop.devicekit.disks.filesystem-mount action:
<allow_any>yes</allow_any>
Having done so I can now mount the USB disks using nautilus, devicekit-disks or palimpsest (suffering from the same "Not Authorized" problem). Unmounting has a little flaw though, it seems like nautilus tries to eject the medium when unmounting, but then again its "Not Authorized" to do so.
However, this is the only solution I could come up with. Since the file I modified will probably be replaced without notice during the next upgrade I fear I will have to go all the way again, not remembering anymore what I did to fix this (otoh, after writing this I probably will).
And since the values in org.freedesktop.devicekit.disks.policy are declared as defaults (and by the fact it lives under /usr) I assume there has to be a site configuration file somewhere in /etc.
Where should I but my customizations? I mean, whats the proper way to do so?
Thanks,
Christoph
P.S.: I like nautilus, it makes me unhappy to use thunar/pmount/whatever to mount my disks.

me again ... this whole *kit stuff seems so odd to me.
I finally read all the devicekit, then the policykit docs, Syu-ed and have now devicekit-disks 009-3 installed.
Using polkit-actions without arguments prints a list of registered actions (known to policykit). This list was pretty short:
[resi@nomad ~]$ polkit-action
org.freedesktop.policykit.read
org.freedesktop.policykit.revoke
org.freedesktop.policykit.grant
org.freedesktop.policykit.modify-defaults
PolicyKit considers all *.policy files under /usr/share/PolicyKit/policy/, only the policykit package installs its files (well, its one file) there.
devicekit-disks (and probably some other packages providing *.policy files) seems to forget about that. So I added a symlink:
[root@nomad policy]# ln -s /usr/share/polkit-1/actions/org.freedesktop.devicekit.disks.policy /usr/share/PolicyKit/policy/
Thats not enough, the file seems to be out of date. I had to replace all auth_admin_keep defaults with auth_admin_keep_session until the file validated.
And hurray:
[resi@nomad ~]$ polkit-action
org.freedesktop.policykit.read
org.freedesktop.policykit.revoke
org.freedesktop.policykit.grant
org.freedesktop.policykit.modify-defaults
org.freedesktop.devicekit.disks.filesystem-mount
org.freedesktop.devicekit.disks.filesystem-mount-system-internal
org.freedesktop.devicekit.disks.filesystem-check
org.freedesktop.devicekit.disks.filesystem-check-system-internal
org.freedesktop.devicekit.disks.filesystem-unmount-others
org.freedesktop.devicekit.disks.filesystem-lsof
org.freedesktop.devicekit.disks.filesystem-lsof-system-internal
org.freedesktop.devicekit.disks.drive-eject
org.freedesktop.devicekit.disks.drive-detach
org.freedesktop.devicekit.disks.change
org.freedesktop.devicekit.disks.change-system-internal
org.freedesktop.devicekit.disks.drive-ata-smart-refresh
org.freedesktop.devicekit.disks.drive-ata-smart-selftest
org.freedesktop.devicekit.disks.drive-ata-smart-retrieve-historical-data
org.freedesktop.devicekit.disks.luks-unlock
org.freedesktop.devicekit.disks.luks-lock-others
org.freedesktop.devicekit.disks.linux-md
org.freedesktop.devicekit.disks.cancel-job-others
org.freedesktop.devicekit.disks.inhibit-polling
org.freedesktop.devicekit.disks.drive-set-spindown
polkit-auth shows my authorizations, thus:
[resi@nomad ~]$ polkit-auth | grep mount
org.freedesktop.devicekit.disks.filesystem-mount
org.freedesktop.devicekit.disks.filesystem-mount-system-internal
org.freedesktop.devicekit.disks.filesystem-unmount-others
It seems to me that I am authorized for all actions listed above, I guess thats because this user is in both the wheel and root groups.
However, when I try to actually mount something nothing has changed.
[resi@nomad ~]$ devkit-disks --mount /dev/sdc
Mount failed: Not Authorized
Since policykit is now properly configured I can use polkit-action or polkit-gnome-authorization to modify the default values in the way polkit expects me to (not tampering with with the *.policy files).
[resi@nomad ~]$ polkit-action --action org.freedesktop.devicekit.disks.filesystem-mount
action_id: org.freedesktop.devicekit.disks.filesystem-mount
description: Mount a device
message: Authentication is required to mount the device
default_any: yes (factory default: no)
default_inactive: yes (factory default: no)
default_active: yes
But even now mounting fails because I'm not authorized.
Back to the start, if I change the factory defaults in org.freedesktop.devicekit.disks.policy mounting succeeds.
I think there might be 2 bugs involved here:
1.) missing links to policy files in /usr/share/PolicyKit/policy/
2.) policykit fails to consider overrides for factory defaults
What do you think?

[SOLVED][XFCE] Cannot mount usb disks & manage network connections

Hi guys,
I'm using XFCE with 3.3.1-1 kernel. Since yesterday I'm not able anymore to automatically mount usb disks, manage my WiFi networks (networkmanage connects to the default access point but I can't select another AP nor editing my settings). I'm also prompted to type my password when I clik on the shutdown icon;
So it seems I lost some privileges but I can't figured out why...
I still belong to the same grousp as before:
[root@archLaptop sclarckone]# groups sclarckone
lp wheel games video audio optical storage scanner power users
Does anybody has an idea where to take a look?
Thanks
Last edited by sclarckone (2012-04-15 20:54:38)

Me too. Start a new thread?
Edit; Nope, this worked for me https://bbs.archlinux.org/viewtopic.php?id=142110
Last edited by Glinx (2012-05-25 11:44:47)

IPod (with Dock Connector) 15GB firewire mounting issues with iTunes 7.0.2

Before I sent my iPod in for battery replacement I backed up my music and restored it under iTunes 7.0.2. I then disconnected it, put it in the box and sent it off. When I got it back, I charged it fully with the firewire cable and the wall charger then tried to mount it to refill it with music. It would not mount with the firewire cable. It is charging but will not show up in the finder or iTunes. I noticed that it would not turn off by pressing and holding the play/pause button. I figured it would eventually sleep so I put it into my laptop bag to bring with me to work.
I got to work and borrowed my buddies' USB cable and the iPod is completely dead. Dead like not even a boot screen. Apparently it can no longer sleep and completely discharged during the night. Additionally, the USB cable doesn't seem to be powering or charging it. I plugged it into my workstation using the firewire cable and although it will charge it still will not mount.
After about a half an hour of charging I disconnected the firewire cable and plugged in the USB cable. The iPod mounted into iTunes. I figured I would restore the iPod again to fix the firewire issue so I clicked Restore. I then got a message saying "You must connect using FireWire to restore the iPod." I cannot connect using Firewire.
To recap, I cannot charge over USB, I cannot update over USB and I cannot mount over Firewire.
I reconnected using USB, Quit iTunes without dismounting the iPod then tried to erase the iPod with Disk Utility, which failed. Next the iPod wouldn't even mount under USB so I went into iPod diagnostic mode and found a new line item labeled USB DISK which forced the iPod to become visible to Disk Utility again. I repaired the iPod disk and it will once again mount under USB but will not charge and will not restore.
I have scoured the apple.com site to try and find a way to downgrade my iPod to what it was before 7.0.2 but cannot find anything.
iTunes 7.0.2 has rendered my iPod totally useless. It was bad enough having a battery that was toasted and was glad to finally get that taken care of but now that I have a battery that works I have software that cannot mount via firewire and will not turn my iPod off and drains the battery. Plus with no way to go back to a previous version Apple has rendered my iPod useless.
Help!... please.

Hi Kenekeu
I just wanted to chime in and bump this thread. Although I've posted here several times about this exact problem, with no solution found yet, and no response from Apple. I tried rebooting into windows (via bootcamp) and reformatting my ipod from there. However when I downloaded the older version of the ipod updater, i was told that it was expired and a newer version was available (sigh). So I now have a windows formatted ipod that still won't connect via firewire.
I am still able to mount and transfer songs via USB in mac OSX. Luckily I had one of those dual usb/firewire cables, which plugs into the plug charger via firewire, and into the computer via USB at the same time, so my ipod doesn't lose charge.
Hopefully there'll be a fix soon, because this is really frustrating. I've had this ipod for a couple years, and was always proud that it lasted this long... and now this.

USB Disk Mount Issues

Similar Messages

Maybe you are looking for