USB does not boot, Secure Boot Disable

I need to install Windows 7 x64 Dual mode with Windows 8 in UEFI mode but not boot the usb device and I have secure boot disabled. my question is, windows boot manager (BCD) should have entries for usb boot?. If so, how would the command to add these entries?
I can only start Windows 8. my ultrabook is acer v5-132

If you are using a Flash Drive to try to install Windows 7 in UEFI mode, it will not boot that way unless you have completed the extra steps to make it capable.
Did you create the Boot partition on the drive and add the additional file?
Being formatted as Fat32, as Christoffer mentions is also necessary.
If Secure Boot is interfering with the Windows 7 boot, you will probably get to the 4 colors coming together and then get an error message or put back into the bios setup, depending on your system. If that happens, enable the CSM.

Similar Messages

  • M93P Tiny - Bios Update - Does not want to boot hdd, usb, cd rom or over network after update

    M93P Tiny - Bios Update - Does not want to boot hdd, usb, cd rom or over network after update
    Bios 
    FBKTB0A
    3/31/2015
    The bios shows updated and i can go into the bios but the ram amount and frequency does not show rite and it also does not want to boot any of those items.
    Please advise.
    Thank You

    Hello all,
    I, too, found this oversight on the part of Lenovo to be quite distressing. It is possible to upgrade the X61 BIOS with a USB thumb drive. I have provided directions at http://ubuntuforums.org/showthread.php?t=817897
    The above tutorial is aimed towards Ubuntu Linux users. However, I believe that users of Vista should be able to follow along. Please let me know if you have any questions... the process is simple enough that it should be possible with any OS out there right now.
    Mike

  • I have wireless mouse does not work with boot camp

    i have wireless mouse does not work with boot camp

    Did you install the correct driver for your Windows version? Are you saying the mouse does not work in Windows after Windows is installed?

  • Windows does not start at boot

    Hello,
    Windows does not start at boot, how? 'Safe Mode either )

    If your system is not properly booting then you must press F8 when start the system then there are two option
    Repair Window,start window normally if not properly work then you will install again operating system.

  • /grub/pxegrub does not exist, invalid boot image

    hi all
    i'm having a small prob when trying to jumpstart an x86 client, with my sparc server.
    any help ?
    i think it's simple, i have to install x86 bootfiles on the server, or something, but how to do that ?
    thanks
    here's my error in detail :
    [599][root@srv-parnode2][Tools]> ./add_install_client \
    -d \
    -e 00:e0:81:58:af:c8 \      -s 10.211.0.2:/DATA2/export/jumpstart/install \
    -s 10.211.0.2:/DATA2/export/jumpstart/install \
    -c 10.211.0.2:/DATA2/export/jumpstart/config \
    -p 10.211.0.2:/DATA2/export/jumpstart/config i86pcadd_install_client: /DATA2/export/jumpstart/install/boot/grub/pxegrub does not exist, invalid boot image
    [601][root@srv-parnode2][Tools]>

    nm, i found my prob, you can close the thread :)

  • Hard disk not detected during booting or also it does not show in boot menu.

    hard disk not detected during booting or also it does not show in boot menu please tell

    you may have a failed hard drive or bad cables, i would check first to see if the hard drive is powering on. if it doesn't try a different power connection, and if it still doesn't start spinning i would say that it is bad and get a new hard drive. If
    it does start spinning and just isn't being recognized, try a different sata port if you have the option or a different sata cable all together.

  • Initscripts 2012.08.3-1 /proc/bus/usb does not exist

    After upgrading initscripts
    [2012-08-28 15:26] upgraded initscripts (2012.08.2-1 -> 2012.08.3-1)
    boot.log shows the following error message
    mount: mount point /proc/bus/usb does not exist
    I didn't find any recent post about this issue. I recall that something changed maybe with /proc and /sys some weeks/months ago, but I get this warning message since the initscripts update.
    Any idea? Or is it a sign that I should familiarize myself with systemd?
    Update:
    I missed this thread, same issue, sorry: https://bbs.archlinux.org/viewtopic.php?id=147916
    Someone may want to delete this one. Thanks.
    Last edited by siriusb (2012-08-30 12:42:38)

    After upgrading initscripts
    [2012-08-28 15:26] upgraded initscripts (2012.08.2-1 -> 2012.08.3-1)
    boot.log shows the following error message
    mount: mount point /proc/bus/usb does not exist
    I didn't find any recent post about this issue. I recall that something changed maybe with /proc and /sys some weeks/months ago, but I get this warning message since the initscripts update.
    Any idea? Or is it a sign that I should familiarize myself with systemd?
    Update:
    I missed this thread, same issue, sorry: https://bbs.archlinux.org/viewtopic.php?id=147916
    Someone may want to delete this one. Thanks.
    Last edited by siriusb (2012-08-30 12:42:38)

  • HT1384 My ipod nano 3rd generation, when connected by usb, does not show up in itunes, does not show up on my computer, does not seem to charge by the wall charger. It just has a black screen. Any ideas for me?

    My ipod nano 3rd generation, when connected by usb, does not show up in itunes, does not show up on my computer, does not seem to charge by the wall charger. It just has a black screen. Any ideas for me?
    I've run diagnostics. Can't find device. I've tried resetting. The toggle has been turned on and off.

    Cable works fine on my other iPod. Reset by pressing menu and center button together for 6-10 seconds. Left it to charge for many hours. Started acting up while running. Suddenly the music stopped playing but my Nike + was still working for the rest of my run. Took it straight it home and plugged it in to the wall to recharge since the battery was fairly low. Looked like it recharged ok but then screen went blank and now does it not show up on iTunes, does not seem to recharge by the wall charger (apple wall charger plugged into a surge protector in India). I have turned the hold switch off and on many times.
    Sounds like a repair issue, which is not easy to do in India :(

  • HT1476 iphone 5 usb does not charge in my 2013 Honda Accord.  Is there a fix for this issue?

    iphone 5 usb does not charge in my 2013 Honda Accord.  Is there a fix for this issue?  It will connect via bluetooth but when I go to connect the usb charger it states that it is not compatible or you never get the charging display on your iPhone 5.  It charges just fine when I use the AC charger in the house.  At first I thought it may have been the cord but the same cord works fine in the house too.  This causes problems when you take long trips and don't have any way to charge your phone while on the road.  Are there any upcoming fixes/iupdates either to the software or usb cord that will fix this?

    Are there any upcoming fixes/iupdates either to the software or usb cord that will fix this?
    Are there any upcoming fixes/updates to the software of your Honda Accord that will fix this?  Everything works fine except when the car is put into the equation?

  • When I plug in my Lacie Firewire 800 drive it causes certain apps to crash. Chrome will immediately crash when I open it, so will DVD player. It's only when I plug in my Firewire 800 drive, USB does not cause issues. What's the deal?

    When I plug in my Lacie Firewire 800 drive into my Mid-2009 Macbook Pro running Mountain Lion - 10.8.2,  it causes certain apps to crash. Chrome will immediately crash when I open it, so will DVD player. It's only when I plug in my Firewire 800 drive, USB does not cause issues. What's the deal?
    I've restarted, verfied the disk, repaired permissions, smc reset.. don't know what else to do..

    Contact Lacie since it's their product you are having issues with. 

  • Chromedit will not be installed because it does not provide secure updates.

    Chromedit will not be installed because it does not provide secure updates.?
    what should i do to install this ?
    == This happened ==
    Just once or twice
    == i installing cromedit

    Did you install this version?
    ChromEdit Plus: http://webdesigns.ms11.net/chromeditp.html

  • "mount point /proc/bus/usb does not exist" -deux

    Hi everyone!
    I've installed arch 6.0 on a laptop running on the 2.4 SCSI kernel.
    Indeed, /proc/bus/usb does not exist. I'm not sure why...
    I'm not sure how to get the full directory either.
    I've viewed this thread and this thread and followed the advice to change the usb line in my fstab to usbfs /proc/bus/usb usbfs defaults 0 0. I'm not sure what I was expecting, but the problem didn't go away and my /proc/bus/usb did not magically appear afterwards.

    ok, I did the update. The usb directory is still not there.
    Since I don't have permission to make the directory myself (even as root), I guess I'll call it quits here.
    I'm using the arch 7.0 cd now. The problem has gone away.

  • Using Outlook for Mac; emails and calendar announcements will not send--error message: "the server does not support secure connections" Help?

    Am using Outlook calendar for Mac--needed for client connection. Invites will not go out. Error message: "server does not support secure connections." Resolution?

    I have done a similar set of things and no results.
    This is really odd, Mac Mail works other emasil clients work, just not Outlook.
    The only event I can tie it back to is the outage a couple of weeks ago when AppleID's weren't working for a perdion of time.  I ended up having to reset mine. 
    Is it feasible a local certificate got corrupted at the same or, oddly, that the SMTP servers don't have the updated password?
    What's odd is that I no matter how much i Google, i can't find anyone else who has this problem, other than here?

  • Car usb does not regognize my ipod nano anymore.

    My car usb does not recognize my ipod nano, help.

    Hey there William,
    It sounds like the iPod is not working correctly with the car stereo connection anymore. I recommend this troubleshooting article named:
    iOS: Troubleshooting car stereo connections
    http://support.apple.com/kb/TS3581
    Troubleshooting tips
    Beginning playback and controlling music
    Some car stereos may require that playback be started or controlled from either the device or the stereo. Ensure that your car stereo is set to the proper input for your device. If it is and you cannot hear sound from your car speakers, try switching to your radio and then back to the proper input.
    When using adapters to connect to your car stereo, you may notice variations in audio quality. When possible, use a shorter connection to the car stereo or try a different cable or adapter.
    Disconnect and restart
    If you are experiencing difficulties with the connection between your stereo and device, disconnect the device, and then power cycle the stereo and your iPhone, iPod touch, or iPad. When the Home screen reappears, reconnect your device. If you cannot power cycle the stereo, turn the car off and then back on to allow the stereo to power off.
    Isolate the issue
    Try to reproduce the issue with an identical or similar accessory, if one is available, or test with a second device.
    Example: If you hear static coming from the left audio channel, try connecting a different device or try connecting to a different stereo or accessory that connects over the same interface (30-pin or Lightning connector, Bluetooth, or headphone jack).
    Restore iPhone, iPad, or iPod touch
    If you have isolated an issue to the device, restore iPhone, iPad, or iPod touch to its factory condition. You should rarely need to use this step with an accessory issue. If the issue affects only a third-party accessory, contact the accessory manufacturer before restoring your iOS device.
    If the device does not update successfully, the issue may lie with the device and not with the accessory. See one of the following articles, depending on your device:
    iPhone
    iPad
    iPod touch
    All the best,
    Sterling

  • Wireless mouse pointer which does not move after boot *sometimes*

    Hi,
    I have a wireless keyboard/mouse combo from Logitech (MK700 keyboard and MX705 mouse), which uses a USB receiver.
    After booting, the mouse pointer sometimes is completely blocked, and I have to reboot to make it work. Sometimes I need to do this twice. I cannot reproduce it and this is not linked to the fact the mouse is active or on sleep mode. This seems to be a race condition, considering it is difficult to reproduce. Once the mouse pointer is working, there is no issue anymore during desktop use.
    I compared lsmod when mouse pointer is working or not, and did not see any difference in the loaded modules.
    This started to happen maybe 3 months ago. I have had this hardware for two years with no problem in the past. It is not a battery problem either.
    Has anyone an idea?
    Last edited by zebulon (2012-03-21 07:22:53)

    Thanks.
    Ther is indeed a difference in evedev detection in Xorg logs when mouse is working or not working.
    Not working:
    [ 22.745]
    X.Org X Server 1.12.0
    Release Date: 2012-03-04
    [ 22.765] X Protocol Version 11, Revision 0
    [ 22.765] Build Operating System: Linux 3.2.9-1-ARCH x86_64
    [ 22.765] Current Operating System: Linux arch 3.2.12-1-ARCH #1 SMP PREEMPT Mon Mar 19 17:50:01 CET 2012 x86_64
    [ 22.765] Kernel command line: root=/dev/sda6 ro vga=891
    [ 22.765] Build Date: 05 March 2012 05:59:48AM
    [ 22.765]
    [ 22.765] Current version of pixman: 0.24.4
    [ 22.765] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 22.765] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 22.765] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 23 06:16:55 2012
    [ 22.816] (==) Using config file: "/etc/X11/xorg.conf"
    [ 22.816] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 22.841] (==) No Layout section. Using the first Screen section.
    [ 22.841] (**) |-->Screen "screen1" (0)
    [ 22.841] (**) | |-->Monitor "monitor1"
    [ 22.841] (**) | |-->Device "device1"
    [ 22.841] (**) Option "IgnoreABI" "True"
    [ 22.841] (**) Ignoring ABI Version
    [ 22.841] (==) Automatically adding devices
    [ 22.841] (==) Automatically enabling devices
    [ 22.866] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 22.866] Entry deleted from font path.
    [ 22.871] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 22.871] Entry deleted from font path.
    [ 22.871] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 22.871] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 22.871] Entry deleted from font path.
    [ 22.871] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 22.871] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/
    [ 22.871] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 22.871] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 22.871] (II) Loader magic: 0x7cef60
    [ 22.871] (II) Module ABI versions:
    [ 22.871] X.Org ANSI C Emulation: 0.4
    [ 22.871] X.Org Video Driver: 12.0
    [ 22.871] X.Org XInput driver : 16.0
    [ 22.871] X.Org Server Extension : 6.0
    [ 22.872] (--) PCI:*(0:1:0:0) 10de:05e2:1682:2394 rev 161, Mem @ 0xf8000000/16777216, 0xe0000000/268435456, 0xf6000000/33554432, I/O @ 0x0000cf00/128, BIOS @ 0x????????/524288
    [ 22.872] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 22.872] (WW) "dri" will not be loaded unless you've specified it to be loaded elsewhere.
    [ 22.872] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    [ 22.872] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    [ 22.872] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 22.872] (II) "record" will be loaded by default.
    [ 22.872] (II) "dri" will be loaded even though the default is to disable it.
    [ 22.872] (II) "dri2" will be loaded by default.
    [ 22.872] (II) LoadModule: "dbe"
    [ 22.948] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 22.955] (II) Module dbe: vendor="X.Org Foundation"
    [ 22.955] compiled for 1.12.0, module version = 1.0.0
    [ 22.955] Module class: X.Org Server Extension
    [ 22.955] ABI class: X.Org Server Extension, version 6.0
    [ 22.955] (II) Loading extension DOUBLE-BUFFER
    [ 22.955] (II) LoadModule: "v4l"
    [ 22.955] (WW) Warning, couldn't open module v4l
    [ 22.955] (II) UnloadModule: "v4l"
    [ 22.955] (II) Unloading v4l
    [ 22.955] (EE) Failed to load module "v4l" (module does not exist, 0)
    [ 22.955] (II) LoadModule: "extmod"
    [ 22.955] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 22.968] (II) Module extmod: vendor="X.Org Foundation"
    [ 22.968] compiled for 1.12.0, module version = 1.0.0
    [ 22.968] Module class: X.Org Server Extension
    [ 22.968] ABI class: X.Org Server Extension, version 6.0
    [ 22.968] (II) Loading extension MIT-SCREEN-SAVER
    [ 22.968] (II) Loading extension XFree86-VidModeExtension
    [ 22.968] (II) Loading extension XFree86-DGA
    [ 22.968] (II) Loading extension DPMS
    [ 22.968] (II) Loading extension XVideo
    [ 22.968] (II) Loading extension XVideo-MotionCompensation
    [ 22.968] (II) Loading extension X-Resource
    [ 22.968] (II) LoadModule: "glx"
    [ 22.968] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 24.007] (II) Module glx: vendor="NVIDIA Corporation"
    [ 24.018] compiled for 4.0.2, module version = 1.0.0
    [ 24.018] Module class: X.Org Server Extension
    [ 24.018] (II) NVIDIA GLX Module 295.20 Mon Feb 6 21:28:16 PST 2012
    [ 24.018] (II) Loading extension GLX
    [ 24.018] (II) LoadModule: "record"
    [ 24.019] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 24.026] (II) Module record: vendor="X.Org Foundation"
    [ 24.026] compiled for 1.12.0, module version = 1.13.0
    [ 24.026] Module class: X.Org Server Extension
    [ 24.026] ABI class: X.Org Server Extension, version 6.0
    [ 24.026] (II) Loading extension RECORD
    [ 24.026] (II) LoadModule: "dri2"
    [ 24.026] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 24.034] (II) Module dri2: vendor="X.Org Foundation"
    [ 24.034] compiled for 1.12.0, module version = 1.2.0
    [ 24.034] ABI class: X.Org Server Extension, version 6.0
    [ 24.034] (II) Loading extension DRI2
    [ 24.034] (II) LoadModule: "nvidia"
    [ 24.035] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 24.111] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 24.120] compiled for 4.0.2, module version = 1.0.0
    [ 24.120] Module class: X.Org Video Driver
    [ 24.154] (II) NVIDIA dlloader X Driver 295.20 Mon Feb 6 21:09:10 PST 2012
    [ 24.154] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 24.161] (++) using VT number 7
    [ 24.734] (II) Loading sub module "fb"
    [ 24.734] (II) LoadModule: "fb"
    [ 24.735] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 24.832] (II) Module fb: vendor="X.Org Foundation"
    [ 24.832] compiled for 1.12.0, module version = 1.0.0
    [ 24.832] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 24.832] (II) Loading sub module "wfb"
    [ 24.832] (II) LoadModule: "wfb"
    [ 24.832] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 27.003] (II) Module wfb: vendor="X.Org Foundation"
    [ 27.003] compiled for 1.12.0, module version = 1.0.0
    [ 27.003] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 27.003] (II) Loading sub module "ramdac"
    [ 27.003] (II) LoadModule: "ramdac"
    [ 27.003] (II) Module "ramdac" already built-in
    [ 29.070] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 29.070] (==) NVIDIA(0): RGB weight 888
    [ 29.070] (==) NVIDIA(0): Default visual is TrueColor
    [ 29.070] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 29.070] (**) NVIDIA(0): Option "UseEdidDpi" "False"
    [ 29.070] (**) NVIDIA(0): Option "DPI" "96 x 96"
    [ 29.070] (**) NVIDIA(0): Enabling 2D acceleration
    [ 31.411] (II) NVIDIA(GPU-0): Display (SAMSUNG (DFP-1)) does not support NVIDIA 3D Vision
    [ 31.411] (II) NVIDIA(GPU-0): stereo.
    [ 31.416] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 260 (GT200) at PCI:1:0:0 (GPU-0)
    [ 31.416] (--) NVIDIA(0): Memory: 917504 kBytes
    [ 31.416] (--) NVIDIA(0): VideoBIOS: 62.00.50.00.52
    [ 31.416] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 31.416] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    [ 31.417] (--) NVIDIA(0): Connected display device(s) on GeForce GTX 260 at PCI:1:0:0
    [ 31.417] (--) NVIDIA(0): SAMSUNG (DFP-1)
    [ 31.417] (--) NVIDIA(0): SAMSUNG (DFP-1): 330.0 MHz maximum pixel clock
    [ 31.417] (--) NVIDIA(0): SAMSUNG (DFP-1): Internal Dual Link TMDS
    [ 31.503] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 31.503] (**) NVIDIA(0): device SAMSUNG (DFP-1) (Using EDID frequencies has been
    [ 31.503] (**) NVIDIA(0): enabled on all display devices.)
    [ 31.538] (II) NVIDIA(0): Assigned Display Device: DFP-1
    [ 31.538] (WW) NVIDIA(0): No valid modes for "1600x900"; removing.
    [ 31.538] (WW) NVIDIA(0): No valid modes for "1366x768"; removing.
    [ 31.538] (WW) NVIDIA(0): No valid modes for "1360x765"; removing.
    [ 31.538] (II) NVIDIA(0): Validated modes:
    [ 31.538] (II) NVIDIA(0): "1920x1080"
    [ 31.538] (II) NVIDIA(0): "1280x720"
    [ 31.538] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
    [ 31.566] (**) NVIDIA(0): DPI set to (96, 96); computed from "DPI" X config option
    [ 31.566] (--) Depth 24 pixmap format is 32 bpp
    [ 31.567] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
    [ 31.571] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 31.571] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 31.571] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 31.571] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 31.571] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 31.571] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 31.571] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 31.571] (II) NVIDIA(0): Config Options in the README.
    [ 31.575] (II) NVIDIA(0): Setting mode "1920x1080"
    [ 31.608] (II) Loading extension NV-GLX
    [ 31.630] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 31.630] (==) NVIDIA(0): Backing store disabled
    [ 31.630] (==) NVIDIA(0): Silken mouse enabled
    [ 31.631] (**) NVIDIA(0): DPMS enabled
    [ 31.631] (II) Loading extension NV-CONTROL
    [ 31.631] (II) Loading extension XINERAMA
    [ 31.631] (WW) NVIDIA(0): Option "PreferredMode" is not used
    [ 31.631] (II) Loading sub module "dri2"
    [ 31.631] (II) LoadModule: "dri2"
    [ 31.631] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 31.631] (II) Module dri2: vendor="X.Org Foundation"
    [ 31.631] compiled for 1.12.0, module version = 1.2.0
    [ 31.631] ABI class: X.Org Server Extension, version 6.0
    [ 31.631] (II) NVIDIA(0): [DRI2] Setup complete
    [ 31.631] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 31.631] (==) RandR enabled
    [ 31.631] (II) Initializing built-in extension Generic Event Extension
    [ 31.631] (II) Initializing built-in extension SHAPE
    [ 31.631] (II) Initializing built-in extension MIT-SHM
    [ 31.631] (II) Initializing built-in extension XInputExtension
    [ 31.631] (II) Initializing built-in extension XTEST
    [ 31.631] (II) Initializing built-in extension BIG-REQUESTS
    [ 31.631] (II) Initializing built-in extension SYNC
    [ 31.631] (II) Initializing built-in extension XKEYBOARD
    [ 31.631] (II) Initializing built-in extension XC-MISC
    [ 31.631] (II) Initializing built-in extension SECURITY
    [ 31.631] (II) Initializing built-in extension XINERAMA
    [ 31.631] (II) Initializing built-in extension XFIXES
    [ 31.631] (II) Initializing built-in extension RENDER
    [ 31.631] (II) Initializing built-in extension RANDR
    [ 31.631] (II) Initializing built-in extension COMPOSITE
    [ 31.631] (II) Initializing built-in extension DAMAGE
    [ 31.632] (II) Initializing extension GLX
    [ 32.105] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 32.105] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 32.105] (II) LoadModule: "evdev"
    [ 32.105] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 32.188] (II) Module evdev: vendor="X.Org Foundation"
    [ 32.188] compiled for 1.12.0, module version = 2.7.0
    [ 32.188] Module class: X.Org XInput Driver
    [ 32.188] ABI class: X.Org XInput driver, version 16.0
    [ 32.188] (II) Using input driver 'evdev' for 'Power Button'
    [ 32.188] (**) Power Button: always reports core events
    [ 32.188] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 32.188] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 32.188] (--) evdev: Power Button: Found keys
    [ 32.188] (II) evdev: Power Button: Configuring as keyboard
    [ 32.188] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
    [ 32.188] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 32.188] (**) Option "xkb_rules" "evdev"
    [ 32.188] (**) Option "xkb_model" "evdev"
    [ 32.188] (**) Option "xkb_layout" "gb"
    [ 32.240] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 32.240] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 32.240] (II) Using input driver 'evdev' for 'Power Button'
    [ 32.240] (**) Power Button: always reports core events
    [ 32.240] (**) evdev: Power Button: Device: "/dev/input/event1"
    [ 32.240] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 32.241] (--) evdev: Power Button: Found keys
    [ 32.241] (II) evdev: Power Button: Configuring as keyboard
    [ 32.241] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
    [ 32.241] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 32.241] (**) Option "xkb_rules" "evdev"
    [ 32.241] (**) Option "xkb_model" "evdev"
    [ 32.241] (**) Option "xkb_layout" "gb"
    [ 32.241] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:2008 (/dev/input/event0)
    [ 32.241] (**) Logitech Unifying Device. Wireless PID:2008: Applying InputClass "evdev keyboard catchall"
    [ 32.241] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:2008'
    [ 32.241] (**) Logitech Unifying Device. Wireless PID:2008: always reports core events
    [ 32.241] (**) evdev: Logitech Unifying Device. Wireless PID:2008: Device: "/dev/input/event0"
    [ 32.241] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Vendor 0x46d Product 0xc52b
    [ 32.241] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found 1 mouse buttons
    [ 32.241] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found scroll wheel(s)
    [ 32.241] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found relative axes
    [ 32.241] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Forcing relative x/y axes to exist.
    [ 32.241] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found absolute axes
    [ 32.241] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Forcing absolute x/y axes to exist.
    [ 32.241] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found keys
    [ 32.241] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Configuring as mouse
    [ 32.241] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Configuring as keyboard
    [ 32.241] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Adding scrollwheel support
    [ 32.241] (**) evdev: Logitech Unifying Device. Wireless PID:2008: YAxisMapping: buttons 4 and 5
    [ 32.241] (**) evdev: Logitech Unifying Device. Wireless PID:2008: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 32.241] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.2/0003:046D:C52B.0003/input/input0/event0"
    [ 32.241] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:2008" (type: KEYBOARD, id 8)
    [ 32.241] (**) Option "xkb_rules" "evdev"
    [ 32.241] (**) Option "xkb_model" "evdev"
    [ 32.241] (**) Option "xkb_layout" "gb"
    [ 32.241] (II) evdev: Logitech Unifying Device. Wireless PID:2008: initialized for relative axes.
    [ 32.241] (WW) evdev: Logitech Unifying Device. Wireless PID:2008: ignoring absolute axes.
    [ 32.241] (**) Logitech Unifying Device. Wireless PID:2008: (accel) keeping acceleration scheme 1
    [ 32.241] (**) Logitech Unifying Device. Wireless PID:2008: (accel) acceleration profile 0
    [ 32.241] (**) Logitech Unifying Device. Wireless PID:2008: (accel) acceleration factor: 2.000
    [ 32.241] (**) Logitech Unifying Device. Wireless PID:2008: (accel) acceleration threshold: 4
    [ 32.241] (II) config/udev: Adding input device UVC Camera (046d:09a4) (/dev/input/event4)
    [ 32.241] (**) UVC Camera (046d:09a4): Applying InputClass "evdev keyboard catchall"
    [ 32.241] (II) Using input driver 'evdev' for 'UVC Camera (046d:09a4)'
    [ 32.241] (**) UVC Camera (046d:09a4): always reports core events
    [ 32.241] (**) evdev: UVC Camera (046d:09a4): Device: "/dev/input/event4"
    [ 32.241] (--) evdev: UVC Camera (046d:09a4): Vendor 0x46d Product 0x9a4
    [ 32.241] (--) evdev: UVC Camera (046d:09a4): Found keys
    [ 32.241] (II) evdev: UVC Camera (046d:09a4): Configuring as keyboard
    [ 32.242] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-7/2-7:1.0/input/input4/event4"
    [ 32.242] (II) XINPUT: Adding extended input device "UVC Camera (046d:09a4)" (type: KEYBOARD, id 9)
    [ 32.242] (**) Option "xkb_rules" "evdev"
    [ 32.242] (**) Option "xkb_model" "evdev"
    [ 32.242] (**) Option "xkb_layout" "gb"
    [ 32.242] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
    [ 32.242] (II) No input driver specified, ignoring this device.
    [ 32.242] (II) This device may have been added with another device file.
    Working:
    [ 21.623]
    X.Org X Server 1.12.0
    Release Date: 2012-03-04
    [ 21.642] X Protocol Version 11, Revision 0
    [ 21.642] Build Operating System: Linux 3.2.9-1-ARCH x86_64
    [ 21.642] Current Operating System: Linux arch 3.2.12-1-ARCH #1 SMP PREEMPT Mon Mar 19 17:50:01 CET 2012 x86_64
    [ 21.642] Kernel command line: root=/dev/sda6 ro vga=891
    [ 21.642] Build Date: 05 March 2012 05:59:48AM
    [ 21.642]
    [ 21.642] Current version of pixman: 0.24.4
    [ 21.642] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 21.642] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 21.643] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 23 06:18:23 2012
    [ 21.702] (==) Using config file: "/etc/X11/xorg.conf"
    [ 21.702] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 21.727] (==) No Layout section. Using the first Screen section.
    [ 21.727] (**) |-->Screen "screen1" (0)
    [ 21.727] (**) | |-->Monitor "monitor1"
    [ 21.727] (**) | |-->Device "device1"
    [ 21.727] (**) Option "IgnoreABI" "True"
    [ 21.727] (**) Ignoring ABI Version
    [ 21.727] (==) Automatically adding devices
    [ 21.727] (==) Automatically enabling devices
    [ 21.752] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 21.752] Entry deleted from font path.
    [ 21.757] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 21.757] Entry deleted from font path.
    [ 21.757] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 21.765] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 21.765] Entry deleted from font path.
    [ 21.765] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 21.765] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/
    [ 21.765] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 21.765] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 21.765] (II) Loader magic: 0x7cef60
    [ 21.765] (II) Module ABI versions:
    [ 21.765] X.Org ANSI C Emulation: 0.4
    [ 21.765] X.Org Video Driver: 12.0
    [ 21.765] X.Org XInput driver : 16.0
    [ 21.765] X.Org Server Extension : 6.0
    [ 21.766] (--) PCI:*(0:1:0:0) 10de:05e2:1682:2394 rev 161, Mem @ 0xf8000000/16777216, 0xe0000000/268435456, 0xf6000000/33554432, I/O @ 0x0000cf00/128, BIOS @ 0x????????/524288
    [ 21.766] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 21.766] (WW) "dri" will not be loaded unless you've specified it to be loaded elsewhere.
    [ 21.766] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    [ 21.766] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    [ 21.766] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 21.766] (II) "record" will be loaded by default.
    [ 21.766] (II) "dri" will be loaded even though the default is to disable it.
    [ 21.766] (II) "dri2" will be loaded by default.
    [ 21.766] (II) LoadModule: "dbe"
    [ 21.826] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 21.833] (II) Module dbe: vendor="X.Org Foundation"
    [ 21.833] compiled for 1.12.0, module version = 1.0.0
    [ 21.833] Module class: X.Org Server Extension
    [ 21.833] ABI class: X.Org Server Extension, version 6.0
    [ 21.833] (II) Loading extension DOUBLE-BUFFER
    [ 21.833] (II) LoadModule: "v4l"
    [ 21.833] (WW) Warning, couldn't open module v4l
    [ 21.833] (II) UnloadModule: "v4l"
    [ 21.833] (II) Unloading v4l
    [ 21.833] (EE) Failed to load module "v4l" (module does not exist, 0)
    [ 21.833] (II) LoadModule: "extmod"
    [ 21.833] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 21.846] (II) Module extmod: vendor="X.Org Foundation"
    [ 21.846] compiled for 1.12.0, module version = 1.0.0
    [ 21.846] Module class: X.Org Server Extension
    [ 21.846] ABI class: X.Org Server Extension, version 6.0
    [ 21.846] (II) Loading extension MIT-SCREEN-SAVER
    [ 21.846] (II) Loading extension XFree86-VidModeExtension
    [ 21.846] (II) Loading extension XFree86-DGA
    [ 21.846] (II) Loading extension DPMS
    [ 21.846] (II) Loading extension XVideo
    [ 21.846] (II) Loading extension XVideo-MotionCompensation
    [ 21.846] (II) Loading extension X-Resource
    [ 21.846] (II) LoadModule: "glx"
    [ 21.846] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 22.902] (II) Module glx: vendor="NVIDIA Corporation"
    [ 22.913] compiled for 4.0.2, module version = 1.0.0
    [ 22.913] Module class: X.Org Server Extension
    [ 22.913] (II) NVIDIA GLX Module 295.20 Mon Feb 6 21:28:16 PST 2012
    [ 22.913] (II) Loading extension GLX
    [ 22.913] (II) LoadModule: "record"
    [ 22.913] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 22.921] (II) Module record: vendor="X.Org Foundation"
    [ 22.921] compiled for 1.12.0, module version = 1.13.0
    [ 22.921] Module class: X.Org Server Extension
    [ 22.921] ABI class: X.Org Server Extension, version 6.0
    [ 22.921] (II) Loading extension RECORD
    [ 22.921] (II) LoadModule: "dri2"
    [ 22.921] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 22.929] (II) Module dri2: vendor="X.Org Foundation"
    [ 22.929] compiled for 1.12.0, module version = 1.2.0
    [ 22.929] ABI class: X.Org Server Extension, version 6.0
    [ 22.929] (II) Loading extension DRI2
    [ 22.929] (II) LoadModule: "nvidia"
    [ 22.929] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 23.006] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 23.014] compiled for 4.0.2, module version = 1.0.0
    [ 23.014] Module class: X.Org Video Driver
    [ 23.040] (II) NVIDIA dlloader X Driver 295.20 Mon Feb 6 21:09:10 PST 2012
    [ 23.040] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 23.047] (++) using VT number 7
    [ 23.721] (II) Loading sub module "fb"
    [ 23.721] (II) LoadModule: "fb"
    [ 23.721] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 24.428] (II) Module fb: vendor="X.Org Foundation"
    [ 24.428] compiled for 1.12.0, module version = 1.0.0
    [ 24.428] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 24.428] (II) Loading sub module "wfb"
    [ 24.428] (II) LoadModule: "wfb"
    [ 24.428] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 26.531] (II) Module wfb: vendor="X.Org Foundation"
    [ 26.531] compiled for 1.12.0, module version = 1.0.0
    [ 26.531] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 26.531] (II) Loading sub module "ramdac"
    [ 26.531] (II) LoadModule: "ramdac"
    [ 26.531] (II) Module "ramdac" already built-in
    [ 27.811] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 27.811] (==) NVIDIA(0): RGB weight 888
    [ 27.811] (==) NVIDIA(0): Default visual is TrueColor
    [ 27.811] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 27.811] (**) NVIDIA(0): Option "UseEdidDpi" "False"
    [ 27.811] (**) NVIDIA(0): Option "DPI" "96 x 96"
    [ 27.811] (**) NVIDIA(0): Enabling 2D acceleration
    [ 29.881] (II) NVIDIA(GPU-0): Display (SAMSUNG (DFP-1)) does not support NVIDIA 3D Vision
    [ 29.881] (II) NVIDIA(GPU-0): stereo.
    [ 29.911] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 260 (GT200) at PCI:1:0:0 (GPU-0)
    [ 29.911] (--) NVIDIA(0): Memory: 917504 kBytes
    [ 29.911] (--) NVIDIA(0): VideoBIOS: 62.00.50.00.52
    [ 29.911] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 29.911] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    [ 29.911] (--) NVIDIA(0): Connected display device(s) on GeForce GTX 260 at PCI:1:0:0
    [ 29.911] (--) NVIDIA(0): SAMSUNG (DFP-1)
    [ 29.911] (--) NVIDIA(0): SAMSUNG (DFP-1): 330.0 MHz maximum pixel clock
    [ 29.911] (--) NVIDIA(0): SAMSUNG (DFP-1): Internal Dual Link TMDS
    [ 29.997] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 29.997] (**) NVIDIA(0): device SAMSUNG (DFP-1) (Using EDID frequencies has been
    [ 29.997] (**) NVIDIA(0): enabled on all display devices.)
    [ 30.033] (II) NVIDIA(0): Assigned Display Device: DFP-1
    [ 30.033] (WW) NVIDIA(0): No valid modes for "1600x900"; removing.
    [ 30.033] (WW) NVIDIA(0): No valid modes for "1366x768"; removing.
    [ 30.033] (WW) NVIDIA(0): No valid modes for "1360x765"; removing.
    [ 30.033] (II) NVIDIA(0): Validated modes:
    [ 30.033] (II) NVIDIA(0): "1920x1080"
    [ 30.033] (II) NVIDIA(0): "1280x720"
    [ 30.033] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
    [ 30.068] (**) NVIDIA(0): DPI set to (96, 96); computed from "DPI" X config option
    [ 30.068] (--) Depth 24 pixmap format is 32 bpp
    [ 30.068] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
    [ 30.072] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 30.072] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 30.072] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 30.072] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 30.072] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 30.072] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 30.072] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 30.072] (II) NVIDIA(0): Config Options in the README.
    [ 30.076] (II) NVIDIA(0): Setting mode "1920x1080"
    [ 30.119] (II) Loading extension NV-GLX
    [ 30.149] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 30.149] (==) NVIDIA(0): Backing store disabled
    [ 30.149] (==) NVIDIA(0): Silken mouse enabled
    [ 30.149] (**) NVIDIA(0): DPMS enabled
    [ 30.149] (II) Loading extension NV-CONTROL
    [ 30.150] (II) Loading extension XINERAMA
    [ 30.150] (WW) NVIDIA(0): Option "PreferredMode" is not used
    [ 30.150] (II) Loading sub module "dri2"
    [ 30.150] (II) LoadModule: "dri2"
    [ 30.150] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 30.150] (II) Module dri2: vendor="X.Org Foundation"
    [ 30.150] compiled for 1.12.0, module version = 1.2.0
    [ 30.150] ABI class: X.Org Server Extension, version 6.0
    [ 30.150] (II) NVIDIA(0): [DRI2] Setup complete
    [ 30.150] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 30.150] (==) RandR enabled
    [ 30.150] (II) Initializing built-in extension Generic Event Extension
    [ 30.150] (II) Initializing built-in extension SHAPE
    [ 30.150] (II) Initializing built-in extension MIT-SHM
    [ 30.150] (II) Initializing built-in extension XInputExtension
    [ 30.150] (II) Initializing built-in extension XTEST
    [ 30.150] (II) Initializing built-in extension BIG-REQUESTS
    [ 30.150] (II) Initializing built-in extension SYNC
    [ 30.150] (II) Initializing built-in extension XKEYBOARD
    [ 30.150] (II) Initializing built-in extension XC-MISC
    [ 30.150] (II) Initializing built-in extension SECURITY
    [ 30.150] (II) Initializing built-in extension XINERAMA
    [ 30.150] (II) Initializing built-in extension XFIXES
    [ 30.150] (II) Initializing built-in extension RENDER
    [ 30.150] (II) Initializing built-in extension RANDR
    [ 30.150] (II) Initializing built-in extension COMPOSITE
    [ 30.150] (II) Initializing built-in extension DAMAGE
    [ 30.151] (II) Initializing extension GLX
    [ 30.624] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 30.624] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 30.624] (II) LoadModule: "evdev"
    [ 30.624] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 30.633] (II) Module evdev: vendor="X.Org Foundation"
    [ 30.633] compiled for 1.12.0, module version = 2.7.0
    [ 30.633] Module class: X.Org XInput Driver
    [ 30.633] ABI class: X.Org XInput driver, version 16.0
    [ 30.633] (II) Using input driver 'evdev' for 'Power Button'
    [ 30.633] (**) Power Button: always reports core events
    [ 30.633] (**) evdev: Power Button: Device: "/dev/input/event4"
    [ 30.633] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 30.633] (--) evdev: Power Button: Found keys
    [ 30.633] (II) evdev: Power Button: Configuring as keyboard
    [ 30.633] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
    [ 30.633] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 30.633] (**) Option "xkb_rules" "evdev"
    [ 30.633] (**) Option "xkb_model" "evdev"
    [ 30.633] (**) Option "xkb_layout" "gb"
    [ 30.677] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 30.677] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 30.677] (II) Using input driver 'evdev' for 'Power Button'
    [ 30.677] (**) Power Button: always reports core events
    [ 30.677] (**) evdev: Power Button: Device: "/dev/input/event3"
    [ 30.677] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 30.677] (--) evdev: Power Button: Found keys
    [ 30.677] (II) evdev: Power Button: Configuring as keyboard
    [ 30.677] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
    [ 30.677] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 30.677] (**) Option "xkb_rules" "evdev"
    [ 30.677] (**) Option "xkb_model" "evdev"
    [ 30.677] (**) Option "xkb_layout" "gb"
    [ 30.677] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101b (/dev/input/event0)
    [ 30.677] (**) Logitech Unifying Device. Wireless PID:101b: Applying InputClass "evdev pointer catchall"
    [ 30.677] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:101b'
    [ 30.677] (**) Logitech Unifying Device. Wireless PID:101b: always reports core events
    [ 30.677] (**) evdev: Logitech Unifying Device. Wireless PID:101b: Device: "/dev/input/event0"
    [ 30.677] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Vendor 0x46d Product 0xc52b
    [ 30.677] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found 20 mouse buttons
    [ 30.677] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found scroll wheel(s)
    [ 30.677] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found relative axes
    [ 30.677] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found x and y relative axes
    [ 30.677] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Configuring as mouse
    [ 30.677] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Adding scrollwheel support
    [ 30.677] (**) evdev: Logitech Unifying Device. Wireless PID:101b: YAxisMapping: buttons 4 and 5
    [ 30.677] (**) evdev: Logitech Unifying Device. Wireless PID:101b: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 30.677] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.2/0003:046D:C52B.0003/input/input0/event0"
    [ 30.677] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:101b" (type: MOUSE, id 8)
    [ 30.677] (II) evdev: Logitech Unifying Device. Wireless PID:101b: initialized for relative axes.
    [ 30.677] (**) Logitech Unifying Device. Wireless PID:101b: (accel) keeping acceleration scheme 1
    [ 30.677] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration profile 0
    [ 30.677] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration factor: 2.000
    [ 30.677] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration threshold: 4
    [ 30.677] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101b (/dev/input/mouse0)
    [ 30.677] (II) No input driver specified, ignoring this device.
    [ 30.677] (II) This device may have been added with another device file.
    [ 30.678] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:2008 (/dev/input/event1)
    [ 30.678] (**) Logitech Unifying Device. Wireless PID:2008: Applying InputClass "evdev keyboard catchall"
    [ 30.678] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:2008'
    [ 30.678] (**) Logitech Unifying Device. Wireless PID:2008: always reports core events
    [ 30.678] (**) evdev: Logitech Unifying Device. Wireless PID:2008: Device: "/dev/input/event1"
    [ 30.678] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Vendor 0x46d Product 0xc52b
    [ 30.678] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found 1 mouse buttons
    [ 30.678] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found scroll wheel(s)
    [ 30.678] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found relative axes
    [ 30.678] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Forcing relative x/y axes to exist.
    [ 30.678] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found absolute axes
    [ 30.678] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Forcing absolute x/y axes to exist.
    [ 30.678] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found keys
    [ 30.678] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Configuring as mouse
    [ 30.678] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Configuring as keyboard
    [ 30.678] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Adding scrollwheel support
    [ 30.678] (**) evdev: Logitech Unifying Device. Wireless PID:2008: YAxisMapping: buttons 4 and 5
    [ 30.678] (**) evdev: Logitech Unifying Device. Wireless PID:2008: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 30.678] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.2/0003:046D:C52B.0003/input/input1/event1"
    [ 30.678] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:2008" (type: KEYBOARD, id 9)
    [ 30.678] (**) Option "xkb_rules" "evdev"
    [ 30.678] (**) Option "xkb_model" "evdev"
    [ 30.678] (**) Option "xkb_layout" "gb"
    [ 30.678] (II) evdev: Logitech Unifying Device. Wireless PID:2008: initialized for relative axes.
    [ 30.678] (WW) evdev: Logitech Unifying Device. Wireless PID:2008: ignoring absolute axes.
    [ 30.678] (**) Logitech Unifying Device. Wireless PID:2008: (accel) keeping acceleration scheme 1
    [ 30.678] (**) Logitech Unifying Device. Wireless PID:2008: (accel) acceleration profile 0
    [ 30.678] (**) Logitech Unifying Device. Wireless PID:2008: (accel) acceleration factor: 2.000
    [ 30.678] (**) Logitech Unifying Device. Wireless PID:2008: (accel) acceleration threshold: 4
    [ 30.678] (II) config/udev: Adding input device UVC Camera (046d:09a4) (/dev/input/event5)
    [ 30.678] (**) UVC Camera (046d:09a4): Applying InputClass "evdev keyboard catchall"
    [ 30.678] (II) Using input driver 'evdev' for 'UVC Camera (046d:09a4)'
    [ 30.678] (**) UVC Camera (046d:09a4): always reports core events
    [ 30.678] (**) evdev: UVC Camera (046d:09a4): Device: "/dev/input/event5"
    [ 30.678] (--) evdev: UVC Camera (046d:09a4): Vendor 0x46d Product 0x9a4
    [ 30.678] (--) evdev: UVC Camera (046d:09a4): Found keys
    [ 30.678] (II) evdev: UVC Camera (046d:09a4): Configuring as keyboard
    [ 30.678] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-7/2-7:1.0/input/input5/event5"
    [ 30.678] (II) XINPUT: Adding extended input device "UVC Camera (046d:09a4)" (type: KEYBOARD, id 10)
    [ 30.678] (**) Option "xkb_rules" "evdev"
    [ 30.678] (**) Option "xkb_model" "evdev"
    [ 30.678] (**) Option "xkb_layout" "gb"
    [ 30.678] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
    [ 30.678] (II) No input driver specified, ignoring this device.
    [ 30.678] (II) This device may have been added with another device file.
    I note the differences start there:
    (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found x and y relative axes
    vs
    (II) evdev: Logitech Unifying Device. Wireless PID:2008: Forcing relative x/y axes to exist.
    Could my Logitech camera interfere with the keyboard/mouse unifier detection?

Maybe you are looking for