Usb don't detect devices

my MBA usb port is powered (it charges devices) but don't detect any device (usb key, HD, phone ...)
It freshly installed with lion.
reset SMC & PRAM done.
any idea ?
thx

What exactly do you mean by not detecting?
In Apple Menu / About This Mac / More Info / System Report, in the left column yu=under Hardware, select USB. Are your devices listed on the right in the USB Device Tree?

Similar Messages

USB Port not detecting device

My usb port on the side of the pc both are not detecting any device. How to fix it?

A good place to start troubleshooting is this HP document, Troubleshooting USB Connections (Windows 7).
If you don't have Windows 7 or if you have further problems, please to provide more information when you post again. The more information you provide, the more likely it is that you'll find someone here to help you.
Welcome to the forum,
GeorgeFN
GeorgeFN
I work on behalf of HP.

My problem is that one of the USB ports and the device does not detect this and inactive but can not find how to reactivate.Help me please! greetings thanks!

Hello good evening, I have a MacBook Pro and my problem is that one of the USB ports and the device does not detect this and inactive but can not find how to reactivate.
Help me please! greetings thanks!

Do you have the Firefox new tab page but the actual sites are missing, or do you have some other page?
If you have some different page, try the quick fix in Fred McD's reply.
If the sites are missing, did you use the Reset feature? That will clear the storage associated with the new tab page. I'm not sure it's possible to recover from that; you probably need to rebuild your page from scratch as you browse.
For possible future reference, here is how to access the hidden setting for the page to display on new tabs:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the search box above the list, type or paste '''newtab''' and pause while the list is filtered
(3) Double-click the '''browser.newtab.url''' preference and enter your preferred page:
* ''Page thumbnails (default)'' => about:newtab
* ''Blank tab'' => about:blank
* ''Built-in Firefox home page'' => about:home
* ''Any other page'' => full URL to the page
Press Ctrl+t to open a new tab and verify that it worked. Fixed?
Some gotchas:
''If Firefox won't let you edit this setting:'' you may have something called SearchProtect on your system.
''If Firefox lets you save your change but ignores it:'' one of your extensions may be overriding it. You can review, disable, and/or remove extensions on the add-ons page:
"3-bar" menu button (or Tools menu) > Add-ons > ''in the left column click'' Extensions
''If the change works during your session, but at the next startup is back to an unwanted page:'' you might have a user.js file in your personal Firefox settings folder (your Firefox profile folder). This article describes how to track down and remove the file: [[How to fix preferences that won't save]].
Any luck?

I-7565 USB DNET not detecting all DNET devices

hello,
I have a USB Devicenet device called ICP DAS I-7565 DNM.
I have connected it to a machine that has 9 devices but it always only detects 6 of them, i tried it on several machines but still the same result.
i also have a NI PCI and PXI 8461 cards that detect all 9 devices.
simplewho.exe also detected all 9 devices.
what could be wrong, how can i troubleshoot the USB device?
Please help

Hi freemason
I wonder if the 3 devices not been detected are always the same, or if this is more lika a "maximum number of devices to detect" issue. Have you tried to remove some of the detected devices to see if another one is detected?
Maybe you can contact the manufacturer of the I-7565-DNM to confirm if all the 9 devices you are trying to detect are supported by it.
WenR

My Book 3.0 (1TB, USB 3.0) detection problem with Envy Phoenix 810-135qe

I have a My Book 3.0 (1TB, USB 3.0)... The older My Book not the newer one... "My Book Essential" or something like that.
I was using it with W7 x64 backup utility on an older HP desktop (HP Pavilion a6560t) without issue up to the day my new HP Envy 810-135qe arrived. I downloaded the latest drivers from WD support, and the thing PnPed fine off the non-powered USB 3.0 on the back of the 810. However, the 810 drops connection after sleep, hibernation, lock, or simply just over time. I've run diagnostics on the WD and the cables, all checked out fine. I tried shutting off power saving to the USB 3.0s in device manager (just a guess), and that seemed to work for a few weeks, however I'm still having the detection issue periodically. All of my drivers are up to date on the HP side. I'm fully reformatting the WD now to see if that might somehow fix the issue (I'll update in a few days on how that worked out).
Anyone have any idea what's amiss? I suspect something with the BIOS. HP chat support has been no help (they go through the same checks I've already done myself) and they got really spooky on another chat when I asked about adding a SSD as the boot drive (I knew it was an issue from here and other forums).... Handed me off to second tier support, and all they would tell me is that they couldn't tell me anything... Basically, no support for any config except for how it was shipped because it's a "custom build" (yes, buyer's regret big time).
Secondly, anyone running a similar config with a en external back up that's running smoothly? My WD is getting old so I was thinking of one of the newer portable USB 3.0 HDDs (both 2.5 and 3.5). My specs follow.
HP Envy 810qe - Win 7 (810-135qe)
Product number: F9A63AV#ABA
Windows 7 Home Premium 64
4th Generation Intel(R) Core(TM) i7-4770K processor quad-core [3.5GHz, 8MB Shared Cache]
4GB Nvidia GeForce GT640 [DVI,DP,HDMI & VGA via adapter]
12GB DDR3-1600MHz [2 DIMMs]
2TB 7200 RPM SATA Hard Drive
16GB mSATA SSD Cache
Microsoft Office Trial
Security software trial
Blu-ray Reader & SuperMulti DVD burner
15-in-1 Multi-slot Media Card Reader, 4 USB Ports (Front/Top), Audio [Front 2USB2.0, Top 2USB3.0]
No TV Tuner Card
Integrated Sound, Envy Audio; Beats Audio
HP USB keyboard and optical mouse
HP Wireless 802.11 a/g/n with Bluetooth(R)(2x2)
HP Home & Home Office Store in-box envelope
This question was solved.
View Solution.

Anglogator, welcome to the forum.
I have the exact computer (See my signature below.). I have installed a Samsung EVO 840 500 GB SSD. It works absolutely great. Samsung SSD's seem to be the only brand that boots without changing any settings in the UEFI Firmware. If you decide to buy one, I will be glad to walk you through the installation process.
I also have a "WD My Book Essentials" 2 GB external hard drive. It works perfectly without making any changes to the BIOS.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

HP DV6c63sl USB ports problem, (Unknown Device)..

Hello,
I have a problem with my USB ports, when I connect my phone with it's USB cable, it's shown as "Unknow Device" and that's just in my laptop.. My other laptop and Desktop PC can detect it without any problem or drivers, and I have the same exact OS ( Windows 7 x64 Ultimate ) on my 3 PCs.
I have the same problem with a Game Controller (PowerPad), it works on all the PCs I've tried it on except my HP DV6c63sl. There's just my USB Mouse that works fine, and almost all other USB devices that I've tried are detected as "Unknow Device", And I've got also a "SM Bus Controller" shown in the "Device Manager window" -when I plug in my USB Game Controller- as undetected, I don't know what it is..
Here's some screens that I think they would help to identify my problem :
& Thank you very much for your help !
I really wants my Laptop to detect all the USB devices like my others PCs ( I'm talking about USB mouses, keyboards, game pads, phones with USB cables.. that get detected automatically without installing any drivers )

Hello Huntrz,
I understand you are having issues with your Windows 7 not recognising a USB device when it is plugged in. I stumbled across a thread on social.technet.microsoft.com titled USB Device Not Recognized on Windows 7 - USB mouse where they discuss a solution that resolved their issue. Now I know your mouse works, but the point is that a USB device should automatically install that is the whole purpose or USB on a computer devices are to be plug and play. Anyways, what they discuss is that what is called a Hard Reset resolved their issue. I am providing you with an HP Support document: Performing a Hard Reset or Forced Reset that will walk you through the steps to performing a Hard Reset on your Notebook.
Please re-post with the results as I am curious as well. Thank you for posting this issue on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

My pc don't detect my Creative Visio

hello, i have install the software, my pc detect MTP device or soemtimes creative zen, but i have a message who says there is a problem... and then i can't use the software because the pc don't detect the creative cause of the problem
what can i do ? i have xp pro sp2, windows media player

Have they ever been recognised in itunes? What version of itunes are you using? Have you tried another usb port or cord? How about another computer?
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/

Some USBs don't appear in Finder. They appear in Disk Utilities so how do I get them to appear in Finder?

Some flash drives/USBs don't appear in Finder. But they appear in Disk Utilities so how do I get them to appear in Finder?

If you've never used them before (they are new) then they are not formatted for Macs.
Drive Partition and Format
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
When you want to remove an external device you must Eject it:
First, select the Desktop icon of the external disk. CTRL- or RIGHT-click and select Eject from the context menu.

Failover Cluster Validation Report Error with IBM USB Remote NDIS Network device

We are setting up Microsoft Windows Server 2008 R2 Failover Cluster on IBM X3850 X5 and get errors in the Failover cluster Validation Report due to the IBM USB Remote NDIS Network Device is using APIPA adresses and both servers are using same APIPA-adresse.
How should I configure the Server and OS for the Failover cluster to be MS approved?
IBM don't recommend that i disable the Network device, but it is a possible solution!?!

What I did was use ipconfig /all to see the settings it is using and then when and set the ip setting on the NDIS driver to be that except I increment the last value by 1 for each node so that they do not have the same IP address. I ran the
cluster validation again and it came up clean and I have not experienced any issues yet. It does give warnings about it being an Automatic Private IP Address and should not be used, which is ok because we are not going to use it anyways.
Rich Baumet

I am trying to communicate with third party instrument via usb but I dont know how to do it even in Ni-max I am not able to see usb port symbol in Devices and Interface section.

hello,
I am tring to communicate my Powersupply which is not from Ni via USB cable ,but I am not able to see my connection or usb symbole in Ni-max .
first time I am using this will you please guide me,and is there any driver i need to download for that?here I put one attachment regarding to this.
Thanks in advance.
Solved!
Go to Solution.
Attachments:
usb is not detected.png ‏182 KB

ya I know that,
thats y i asked you that y it is so because i am not able to see that usb port here i can see that much only.
thats y i got confused.
and I can see my hameg connection in my control panel and also in device manager.
http://www.hameg.com/drivers.0.html?&no_cache=1
this is website for hameg driver in that product select hmp4040 than hmp4000 list will open in that i have download third one in which plug and play is given.
or here i send my vi it might be helpful.
Attachments:
hmp4040 Output DC Volts.vi ‏17 KB

My Iphone 3G don't detect my Jabra BT2010 headset

I have a Jabra BT 2010 Bluetooth headset. When I turn on my bluetooth of my Iphone it don't detect my headset.
I've look on the website of Jabra and it says that the BT 2010 is compatable for the Iphone 3G but still it will not working.
Can someone help me?
Greetz Kai

Folks..
There was a post similar to this, but was lacking something that worked for me specifically. From the Apple site http://us.jawbone.com/pairingguide.aspx the following will pair the Jawbone (original at least) to the Iphone. I had similar problems with not being able to pair until I came across this:
Apple iPhone
_*Set the Jawbone to Pairing Mode._*
For the Original Jawbone, press and hold down the Noise Shield button for at least three seconds until the LED Indicator Light flashes red.
For the New Jawbone, press and hold down both the NoiseAssassin™ Button and the Talk Button for at least three seconds until the LED Indicator Light flashes red and white alternately.
From the iPhone Home screen, touch Settings.
Touch General.
Touch Bluetooth.
Turn Bluetooth on. (The iPhone will search for nearby Bluetooth devices.)
Touch Jawbone on the list.
Enter the PIN number "0000".
Touch Connect.
The Jawbone should now be paired with the iPhone.
I hope this helps someone - it helped me.
Thanks to all who posted before me.

Driver install don't detect Labview 2013

Hello,
After installing Labview 2013 (32bits) , installing driver (Daqmx,etc...) (DVD feb.2013) , application driver don't detect labview 2013, and doesn't want install anything.
Do you know this problem ? and how can i fix ?
Thanks.
Ludovic
Windows 7 32bits
Labview 2013 Eng 32bits
Devices drivers DVD4 feb.13 (also try with Aug12 version)

Hello,
Thanks for answer,
I can't find link for download devices drivers August2013... Exist ?
(@Julien..) Your download link is Labview 2013 download application, but don't contain drivers (i.e. DaqMx)
In other link for download Labview (2013), ( https://lumen.ni.com/nicif/confirmation.xhtml ) recommended download devices drivers is August 2012 ... (http://joule.ni.com/nidu/cds/view/p/id/3145)
Best regards
Ludovic

VZAM cannot detect device - I'm on my 5th device in 2 weeks! Help!

I have a Dell Inspiron 1100 laptop that works perfectly despite being older (2003), Windows XP Service Pack 3.
I purchased a Verizon Wireless 4G LTE USB Modem, Pantech UML290. When I first installed it, along with VZAccess Manager, it worked great! But on April 12th, 2011 when I opened VZAccess Manager I got the pop up that new software for VZAM was available for installation. I downloaded it and installed it, but then immediately VZ Access Manager could no longer detect the Pantech device, even though my computer detected it and all the drivers were installed. When I click "Detect Device", I immediately get the error message that a device cannot be detected, device not available.
After several hours on the phone with Verizon tech support and about 15 install/uninstalls (making sure there is no extraneous Verizon software leftover floating anywhere on my hard drive), they sent me another device. Same issue. Sent me a 3rd device. Same issue. They sent me an LG V600. Same issue. And a new SIM card. Same issue. 3 Pantechs and 2 LG's and a SIM card.
I went to the Verizon store and each time the Pantech or LG units could not be detected on the Netbook in the store, so it is not just my computer having issues.
I'm wondering if the downloaded software corrupted something in my computer so that VZ Access Mgr can no longer detect 4G devices or the current version of the software is bad. We also installed/uninstalled the VZAM CD that came with my Pantech. No luck there either.
I've tried using System Restore, but there were no restore points available by the time I tried it. I've had my computer looked at by a friend who knows computers and there are no issues he could find.
I've called Verizon Tech Support and they have a support ticket out, but the response every time is to uninstall/install several times and then send me another device to try!
My computer recognizes the device on both of my USB ports. After I reinstall the software each time, I plug in the device and then the computer says I have new hardware. It also shows up in the Device Manager and there are no exclamation marks or question marks. It is shown as "enabled" in the properties field. There are no conflicts or incompatibility issues.
It has been 2 weeks and I need internet for my business. Please help!!!
Thank you in advance for any help!

Oh, these fair weather friends. I'm a little skeptical about the Bios corruption story. I use the same device as yours and have fooled around a lot with both software and hardware. I have a Dell Latitude D420 running XP (SP3). If you check my posts, you'll see some of the problems I have found - but I have not seen your issue. I have also installed my device on a brand new windows 7 pc with no issues like yours.
Now, onto the Registry - after uninstalling all software from Smith Micro - start the registry editor (regedit.exe) and search on a registry key like this HKEY_CURRENT_USER\Software\Smith Micro\VZAM - Verizon Wireless
you can find this key (and subkeys) by "finding" a key name with "smith" in it. Delete this key and others like
HKEY_USERS\S-1-5-21-1395545137-932754572-1724954416-1000\Software\Smith Micro.
Then reinstall the drivers and the software. Note: in the add/remove programs, look for both drivers and the vzam application software. Hopefully, this will fix things. Also, make sure your SIM is properly installed in the device and the contacts are clean.

Why my Iphone4 don't detect my Ipad2 with bluetooth and opposite

Why my Iphone4 don't detect my Ipad2 with bluetooth and opposite

I have the same problem.
I also need both devices to detect each other because some software like scrabble require the bluetooth connection so play. I am also using Conference and Remote (recommended by Apple!) which are also able to use the bluetooth connectivity

Lexmark Z35 (usb) don't work?

Hi all,
Printers USB don't work in the Tarantella EE 4?
Thanks

Hi Fernando
Whether a printer is USB, Parallel or Network isn't relevant at all. The
tarantella client makes whatever printer is available on the system visible
to the application, receives the print job itself and then uses system calls of
the client operating system to send the print job to the printer. The
client needs no knowledge of what type of device the printer receives
information from.
If the printer is visible but not working it suggests a problem with the
print queue. If the printer isn't visible it probably isn't available
for some reason.
The following may help troubleshoot the problem:
http://www.tarantella.com/support/documentation/sgd/ee/4.1/help/en-us/base/standard/printing_problems.html
Regards
Barrie
On 2005-07-05, Fernando Ribeiro <[email protected]> wrote:
Hi all,
Printers USB don't work in the Tarantella EE 4?
Thanks

Usb don't detect devices

Similar Messages

Maybe you are looking for