"USB draws too much power" from GoPro camera?

My GoPro camera battery doesn't seem to charge right or something because when I charged it tonight, it seemed to be over heating. This is a brand new camera and one of the first time I tried charging the battery.
When I checked my computer it came up with the error:
"Because a USB device was drawing too much power from your computer, one or more of your usb devices have been disabled"
I tried a different cable, that didn't work. Reset the SMC. That didn't work. Reset the PRAM. That didn't work. Tried to plug in my iPod to see if that works, it works fine. It refuses to connect via USB to my GoPro camera
I'm thinking of reinstalling OSX 10.6.8
I have a black Macbook, 2.4ghz intel core 2 duo.
Anyone else have any ideas of what to do??

Which GoPro Hero Camera?
I use both my GoPro Hero 2 cameras with the same MacBook and have no problems.
Try charging the camera batteries before you connect to the MacBook.
I am interested to see if that works for you.

Similar Messages

  • Why do I get usb draws too much power with GoPro Hero?

    I just bought a GoPro Hero 3 Black and it works fine.  First time I connected to a USB port it worked jsut fine.  Later, when I tried to connect it again, I got a message that the USB port is drawing too much power.  I tried a diferent port and it gave same mesage.  Disconnected, tried again and it worked fine.
    I'm wondering if it's a matter of the camera battery drawing too much power when charging?  E.g. first time connected it was fully charged.  I haven't tried it yet again with a full charge.
    Any ideas?

    Which GoPro Hero Camera?
    I use both my GoPro Hero 2 cameras with the same MacBook and have no problems.
    Try charging the camera batteries before you connect to the MacBook.
    I am interested to see if that works for you.

  • I am trying to upload photos from my digital camera. Every time I try to plug it into my USB, the following error message comes up: "Because a usb device was drawing too much power from your computer, one or more of your USB devices have been disabled."

    I am trying to upload photos from my digital camera. Every time I try to plug it into my USB, the following error message comes up: "Because a usb device was drawing too much power from your computer, one or more of your USB devices have been disabled."
    I don't have anything else plugged into my MBP, so I am confused as to what's going on.  This problem has never happened before.  MBP is less than a year old - about 9 months old.  HELP

    Get a powered USB hub.
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

  • "Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled." HELP!

    When I plug in my son's iPad I get this message "Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled." I only have one charger for this iPad all my other chargers are for iPhone 4s. I have pluggerd it in different outlets around the house and the iPad will not charge. When I plugged it on my lap top to back it up it gave me the warning message. HELP!!

    I have the same problem on my Air. The message first came up while my iPhone was connected to it for some time. Since then, it pops up ALL THE TIME, whithout anything being connected to the USB port, at what appear to be random intervals that vary between about one hour and a few seconds. I have tried resetting the SMC and  the PRAM, but no results. A quick search revealed that thousands of users are facing this problem, but Apple has yet to provide a solution. Please help!

  • Can't print to HP Photosmart C5180. getting error mssg that says, "Because a USB device was drawing too much power from your computer, one or more of our USB devices have been disabled."  Never seen this before.  How do i fix this?

    can't print to HP Photosmart C5180. getting error mssg that says, "Because a USB device was drawing too much power from your computer, one or more of our USB devices have been disabled."  Never seen this before.  How do i fix this?

    Get a powered USB hub.
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

  • "Because a USB device was drawing too much power from your computer, one  or more of your USB devices have been disabled.

    Here is the total error message:
    "Because a USB devce was drawing too much power from your computer, one
    or more of your USB devices have been disabled.
    To prevent damaging your computer, the USB device drawing too much
    power has been disabled. Other devices may have also been disabled.
    When you disconnect the device drawing too much power, your other USB
    devices will be enabled again."
    Now in contrast to every other thread on this i get this error message eveytime i connect my soundcard (interface). Not when i start up the mac or anything, just when i connect the sound card. (the soundcard does not have its own power source but note that this has never happened before and i have had this soundcard for about a year!)
    It deactivates so i cannot use it.
    I have tried:
    Connecting the soundcard to my mothers mac -> it worked!
    Connecting an external harddrive to my mac -> it worked!
    so basically, i can't be the soundcard or the cable and it cannot be the mac USB port?
    I don't know what to do! i really need this to work! anyone got an idea??

    Hi, ryankeenanrk. 
    Thank you for visiting Apple Support Communities. 
    I would recommend trying the steps in both articles below and test the results. 
    OS X Mountain Lion: Reset your computer’s PRAM
    http://support.apple.com/kb/ph11243
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964
    Cheers,
    Jason H. 

  • "Because a USB device was drawing too much power from your computer..." error withOUT any USB device

    Hi,
    I am getting this error since recently when I am using my MBP:
    "Because a USB device was drawing too much power from your computer..."
    The 'funny' thing: there is no USB device attached to the computer (only power and monitor cables).
    Why is this happening and what could I do about it?
    Appreciate your ideas?

    It's probably an internal hardware fault, but you can try this:
    Intel-based Macs: Resetting the System Management Controller (SMC)

  • I am having a problem when I plug my iPod into my macbook. When I plug the cable into my mac I get the following message - "Because a USB device was drawing too much power from your computer, your USB device has been disabled." PLEASE HELP!

    I am having a problem when I plug my iPod into my macbook. When I plug the cable into my mac I get the following message - "Because a USB device was drawing too much power from your computer, your USB device has been disabled." CAN SOMEONE PLEASE HELP!

    The rest of the message in the pop up window says "To prevent damaging your computer, the USB device drawing too much power has been disabled. Other devices may have also been disabled. When you disconnect the device drawing too much power, your other USB devices will be enabled again."

  • New iMac 27"  and just plugged in a Apple USB superdrive and get message, "Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled."  I am trying to load Office mac2011  what to do?

    I have a new iMac 27"  and just plugged in a Apple USB superdrive and get message, "Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled."  I am trying to load Office mac2011  what to do?

    If you just bought the iMac and the Sjuperdrive take the superdrive back and get a refund. The by any other brand external DVD drive that connects by USB and try that. Most come with a Y USB cable to allow you to connect to 2 USB ports to supply enogh power to the drive IF Needed.
    Or take both back and get a refund on both, you have 14 days to return it no questions asked, and buy another iMac and some other brand external DVD drive.

  • I keep getting this message : Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled.

    I keep getting this mesage : Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled.
    I need to charge my phone but it's not letting me!! Please help!

    Solution may be found if you search in the "More Like This" section over in the right column and in the article - http://support.apple.com/kb/HT1151. 

  • HT1212 i get this message? "Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled."

    Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled?
    What do I do?

    Not Charge
    - See:      
    iPod touch: Hardware troubleshooting
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use. One symptom of a bad Lightning cable is the message you are getting.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar      

  • Because a USB device was drawing too much power from your computer - bla, b

    In the last week or so, my iMac (Intel CoreDuo) started displaying an error message every 30 seconds saying "Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled", followed by some other useless "explanations" (which BTW can't even be copy/pasted). This has happened before (for about a year now) at every startup, but that was more acceptable; now that the message comes every 30 seconds it renders this machine unusable.
    I tried it with or without any USB accessories attached, with or without powered hubs attached, I reset the PRAM and SMC and reinstalled the OS twice. The only option I have left is to trow this machine out and buy a new one (believe me, it's not going to be a Mac).
    This shows not only the lack of quality of the hardware (crappy logic board and USB ports) but also a complete disregard for the annoyance these constant popping messages create to the end user when designing the OS. Just while writing this message I had to press the OK button about 10 times. It's AWFUL!!!

    Hi cimula. before you turn to the extremes have you tried reinstalling snow leopard. maybe you had a problem occur when it was originally installed and is missing a driver or something. also take it to an apple store if possible. take everything needed to run the imac and show one of the geniuses the problem and 90% of the time if you are nice and calm they will gladly help and diagnose the problem even if it is out of warranty. no promises it will be free it could be a hardware malfuntion. just dont force your self back to pc once all of the problems are gone you will love it again. i switched from pc which i had been using my whole life after a friend showed me his macbook and have never looked back. of course once and a while there will an error, problem or whatever but is it worth switching to a pc which has to have a security program running 24/7 to stay alive and sucking up all of the cpu and slowing you down? hope i am helping Dean

  • I plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???

    i plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???

    Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?

  • HT1338 Does anyone have a fix for the error message "Because a USB device was drawing too much power from your computer one or more of your USB devices have been disabled" - this is a brand new machine with nothing connected to the USB ports - i've done u

    Hi
    does anyone know how to fix the message on my iMac:
    "Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled."
    This is a brand new machine and did not have anything attached to the USB ports"
    Thanks for any help

    If you are getting that message on a brand new Mac with nothing connected to the USB ports, take it back. It is broken.

  • I have message in screen ,Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled.

    i fix my iphone 5 to syn with my macbook in begging is ok after  i have message in screen ,Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled

    Unplug whatever other devices you also have plugged into USB, and try again. Better not to plug the iPhone into a USB hub.

Maybe you are looking for