USB Drive doesn't show up in My Computer

I have a 2.5" Seagate 500GB 7200RPM laptop drive mounted into a USB case.  I plug it into my USB port along with another one that goes from DC to a different USB port.  In Device Manager, it is shown as "ST950042 0AS USB Device," which tells
me that it is being seen. However, when I open "My Computer," the drive does not show up. I have a failing drive that I keep all of my media files on and am trying to back that up to this drive, however, I cannot get a drive letter assigned to do open the
drive and back up my files.

Why doesn't my one still work?
i got my important work there!
If you seriously want some assistance with your problem, then start your own post and provide lots of details about your system and your situation.  Absolutely no one can provide an answer to such an abstract question.  You mus provide details,
lots of details.
Read the Microsoft KB @ http://support.microsoft.com/kb/555375 on how to ask for help and then start your own thread.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Similar Messages

  • Western digital hard drive doesn't show up anymore

    I bought a Macbook Pro a few months ago and I've been using my Western Digital external USB hard drive with up until now with no problems. Then today for some reason, I turn my computer on and the drive doesn't show up anymore. It doesn't show up in disk utility either. I've rebooted a few times but no luck. I inserted a flash drive and it mounts ok so it's not the USB port. I even switched usb cables just in case the cable was bad. Any suggestions?

    Hi there
    Sorry to hear you are having trouble with your Mac.
    Is the ext HD a powered drive (needs AC power to run) or portable? (smaller, doesn't need to be plugged in to AC)
    If its AC powered, check that all the usual lights are lit up on it (flashing activity light, power light etc), if not, then you would need to contact WD.
    You can also try resetting the SMC & PRAM, as I have seen this cause a HD to not mount before.
    Cheers

  • External usb drive doesn't appear correctly connected via usb to Time Capsule

    After using it successfully for months over my home LAN by connecting it via FW800 (and suing filesharing) to a stationary MacBook Pro, I'm attempting to connect a 2 TB Hitachi Deskstar 7K2000 hard drive (in a Rosewill quad-interface enclosure with Oxford semiconductor bridge chip) via USB cable to my third-generation Time Capsule. It is formatted as HFS+ with a GUID partition table.
    It appears in Airport Utility and mounts correctly, but none of its folders appears. Have tried two different USB cables with the same results.
    Any ideas as to what could be wrong?

    So do I. I have a 350 GB Maxtor One Touch external harddrive. When I boot the mac, the drive doesn't show. And if I run the AirPort Disk Utility, it shows by name. But no matter what settings I chose, it doesn't mount and it says "No Disk Found" in the menu.
    But here comes the interesting bit: If I turn off the harddrive, and turn it back on again, AirPort Disk Utility finds it. So I think the problem has to do with the harddrive spinning down and going into sleep-mode. For some reason it seems to become invisible to the Extreme-box when doing so. But if that's correct, what the heck do I do about it?

  • My external hard drive doesn't show up in finder, is it dead?

    My external hard drive doesn't show up in finder.Time machine can't find it. Does this mean my external hard drive is dead?
    I borrowed a friends and switched mine with hers. My acted the same way in her macbook. I switched the cords on the external drives, no change.
    Also, Is there a way to retrieve the information from my sick external hard drive? Thanks for your help.

    If the Disk Utility sees it, you might be able to repair it or recover the data on it with a product such as DiskWarrior or Data Rescue.
    If the Disk Utility doesn't see it, contact professional support.
    (64290)

  • URGENT Trying to wipe and reinstall Leopard 10.5 on my 2008 imac8,1 from the disk but my hard drive doesn't show up

    So to give a little big of a background on my computer.  I got it January 2009 as a graduation gift, because I was going to get a degree in Graphic Design and Animation.  I only worked on it [mostly brousing the web, and itunes]  for about 6 months because I was taking all of my general courses for college.  I then met my boyfriend [late 2009] and moved in with him, my boyfriend has a macbook so I left my mac at my parents house.  I was only Using it every now and then and it would be idle/ or shut off the rest of the time. 
    Fast forward to fall 2011.  Me and my boyfriend live in a condo so I brought my computer over because I am now taking graphic design courses and need my computer.  I installed a free 30 day trial of adobe cs5.5.  It made my computer kind of slow and it froze alot even though I still have over 250gb's of memory in it.  After the trial ended I kind of stoped using my computer again,  rather installing the free trials of cs5.5 on my mom and my boyfriends macs until I had enought money saved up to buy it.
    Here's where it gets tricky.
    So now its March 2012 and I tried uninstalling the trial of cs5.5 on my computer since it was just taking up un needed space.  I had to uninstall all of the programs one at a time other wise it would freeze up.  I have had to hold the power button down to get it to turn off because i couldn't even move the mouse even after waiting a while.  Anyhow I get to the last program and it keeps freezing, I tried shutting down my computer via<apple< shut down. But when I start it up again I got a file with a question mark flashing on my screen.  So I looked up how to fix that and had to locate where to start up [I selected my hard drive] then I was able to get on to my computer.      
    So then I go to disk utilitys and do a repair on my internal hard drive to fix if there were any messed up files. After the files are repaired I figure I'll restart it and let everything get up to date.  When I do I get the gray screen with the apple and the spinning wheel.  This happens OVER and OVER.  I tried soft reseting it, manually turning off the computer, you name it.  But it still keeps happening.  So I figure I'll just wipe it clean and reinstall the whole thing. [I have it backed up on an external drive]
    I try to reinstall leopard 10.5 from the disk that came with my computer, all goes well until I gets to the 3rd screen where you select where to save it to, my hard drive doesn't show up.  But if I connect my external hard drive it shows up right away.  I try seeing if it pops up on disk utility, and it doesn't show up there either. 
    Is it possible that my hard drive is shot?  I haven't really used my computer that much.  Its pretty much sat at my parents house for 2 of the 3 years I've had it.  So its not like I used it a whole lot. 
    Help! I'm a college student who needs her mac now more than ever for my design classes!

    The battery alone is a $5 to $15 part.  Hard drives vary in cost, and depending on the iMac, they may or may not be able to install a third party hard drive, or one resold through Apple.    The resold through Apple drives tend to cost more.  This article discusses the varying successes of third party drives on iMacs:
    http://blog.macsales.com/10146-apple-further-restricts-upgrade-options-on-new-im acs 
    The labor costs depend on the store as well as the time to get the parts in stock.    Call around.

  • ICloud Drive doesn't show up my Numbers folder on my new macbook pro.. what to do?

    iCloud Drive doesn't show up my Numbers folder on my new macbook pro.. what to do?

    The warranty entitles you to complimentary phone support for the first 90 days of ownership.

  • My DVD/CD drive doesn't show up in finder, it does via VM ware on XP, how do I get it to show up in both OS

    my DVD/CD drive doesn't show up in finder, it does via VM ware on XP, how do I get it to show up in both OS

    If the Disk Utility sees it, you might be able to repair it or recover the data on it with a product such as DiskWarrior or Data Rescue.
    If the Disk Utility doesn't see it, contact professional support.
    (64290)

  • Hi, my dvd drive doesn't show on my computer and device manager. can anyone help me?

    Hi, my dvd drive doesn't show on my computer and device manager. can anyone help me? Notebook HP dv6700z.
    This question was solved.
    View Solution.

    Hi,
    If the drive is not showing in the list of bootable devices, you can be fairly certain that it has suffered a Hardware failure and will need to be replaced.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • IPod doesn't show up in My Computer/iTunes

    I tried the Driver thing with updating even deleting and reinstalling still it doesn't show up in My Computer or iTunes.
    I did show up like a week ago but then it said it needed a restore or something but now if I plug it in I hear the sound a device is plugin but nothing happens if I open iTunes I don't see the iPod.
    I also tried resetting didn't work either
    The iPod itself still works listening to music on it everyday but I want it to work in iTunes because I want to put new music on it.
    Please someone help me

    Have you tried these pages:
    *[iPod Missing in My Computer or iTunes for Windows|http://support.apple.com/kb/TS1369]*
    *[Ipod not recognized properly|http://support.apple.com/kb/TS1538]*
    If you can't see the ipod in disk management or the device manager, before you connect the ipod, open itunes, select edit/preferences, leave this window open and click on show desktop. This will make itunes busy. Then connect the ipod, and try the above help pages.

  • Hard Drive No Longer Showing Up In My Computer

    I Purchased an HP Pavilion dv7-6188ca Entertainment Notebook PC back in December of 2011 and had no problems up until this point. I noticed today that my secondary internal hard drive is no longer working. It doesn't show up in My Computer any longer, nor the computer BIOS. I noticed a small dent to the right of the touchpad and was thinking that a family member may have dropped something on it. I want to know if there is anything that can be done to try and at least recover the data on it. Any suggestions would be helpful. I also checked in Administrative Tools and the drive doesn't show up there either.
    I'm running Windows 7 64 bit. I haven't done anything recently to change settings on the computer or anything either.

    I fixed it!
    You have to go into your Pictures folder and delete the iPhone Photo Cache folder....then it will recreate it and successfully sync!!
    It still does not show up in My Computer but I think if I reconnect my iPOD and enable Disk-Access, that that may resolve that small problem as well

  • My iPod doesn't show up on "My Computer" or iTunes and it doesn't sync or charge. Help please?

    I have an iPod Classic, the 2nd most recent version. I havn't had problems with it until a week ago. Before I had the new iTunes update, a week ago, it wouldn't show up in my Device's or "My Computer"  , wont sync and It wouldn't charge either. I thought to myself "Maybe I should update my iTunes, maybe thats why it's not working". I updated my iTunes library to the most recent software last night thinking it would help but... It didn't help at all and made things much more complicated. I don't like how the new iTunes navigates and the iTunes Helper isn't there now. I'm still facing the problem where it doesn't show up in iTunes AND it doesn't show up on "My Computer" AND still doesn'tt sync but the thing thats different is that it'll charge a quarter bit and say it's done, or it wont charge at all and stay on my home screen. I need help here. Anyone have any suggestions?

    Not Charge
    - See:       
    iPod touch: Hardware troubleshooting
    - Try another cable
    - Try another charging source
    - Inspect the dock connector for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genus Bar of an Apple store.
    Apple Retail Store - Genius Bar
    If it does not even turn on
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I have recently updated my iTunes to the latest software. Since then my iphone will not sync with the computer, it doesn't show up in my computer any more. The computer makes the bing sound as I plug in but i am unable to sync, how can I fix this problem?

    I have recently updated my iTunes to the latest software. Since then my iphone will not sync with itunes, it doesn't show up in my computer any more either. The computer makes the bing sound as I plug in but i am unable to sync, how can I fix this problem?

    http://support.apple.com/kb/TS1538

  • My ipod just stopped playing and is unresponsive now. it doesn't show up in my computer and doesn't turn on

    my ipod just stopped playing and is unresponsive now. it doesn't show up in my computer and doesn't turn on. plz advice

    i fixed it YEAH!!! lol i uninstalled itunes and installed an older version of itunes.  for some reason it wouldn't work with the new version.

  • USB Dard drive doesn't show up after i failed to eject it

    i turned off a usb external drive without ejecting it first and now it doesn't show up on the desktop,
    when i run disk utility it just shows the gathering disk information but doesn't get past this unless i turn off the drive again. is there a way of fixing this as i've has it happen before and after a while the drive comes back after i leave it for a while.

    for some reason it just came back on after i left it for 10 minutes.

  • My external hard drive doesn't show anymore

    Hello Everyone,
    I hope you can help me. Today I wanted to put new data on my WD hard drive, I have it for almost a year and always worked fine (it's just USB, no power necessary). But my External HD was almost full so I deleted the "time machine" back-ups. Now, my Macbook Pro or iMac doesn't show my WD in Finder. I can find it in Disk Utility but only for a few seconds. Can someone please help me by giving some tips or own experiences? Thanks!

    If you want LR to show the full path of a directory tree as it is on an actual drive, you are going to have to fool it into showing it to you.
    a) Place a COPY of a photo, ANY photo, in the directory/folder that you want to show as the root of your folder tree in LR.
    b) Using "Import Photos from disk" import ONLY the photo that you placed in the 'root' folder, by DOUBLE-CLICKING on it so that only it is imported.
    c) After the import, your folder structure should now look the way that you want it to in LR, matching the actual drive structure from the root upwards.
    d) Using LR, delete the photo that you used as a placeholder. The LR Folder structure should remain intact.

Maybe you are looking for

  • Creation of catalog code for mic(qualitative)

    Hi, in qs21, whe i clicked on catalog, nothing codes are appearing. i want to have "yes" and "no" codes for qualitative characeristics. pls advise how to create those codes and assign here in mic?

  • Conversion customer to Business partner: R/3 -- XI -- R/3

    Dears, For the implementation of Credit Management, we needed following setup: 1. Customer data is sent to XI by IDOC 2. The IDOC is mapped to a Business partner in XI 3. The business partner is sent back to the R/3 system with the ABAP proxy. SXMB_M

  • Wireless Module Not Supported...in the manual it is?

    HP maual located here: http://h10032.www1.hp.com/ctg/Manual/c02770268.pdf Page 20 Chapter 3 it lists: Intel Centrino® Wireless-N 1000 (802.11b/g/n) 593530-001 So I ordered this from the HP parts store and received it today and the laptop posts with a

  • How we can handle signed packed datatype  in ODI

    Hi I am generating target file from oracle as source. but i need to pack some numeric field into signed packed format. there are two type of numeric values 1)1234 2)1234.23 i am getting successfully packed value in case of 1234. In case of packing 12

  • Facing Problem In Accessing SAP System through Eclipse ABAP Tool

    Hi All, I am willing to learn SAP ABAP. I installed SAP GUI 7.30 for windows and Eclipse ABAP Tool. I also connected to E66 [dkmgd37] System through Consolut but Whenever i am trying to access SAP System from eclipse ABAP project, it is showing you a